capper t cap used for sale

DimaSimma EMS-30 TWIN was manufactured in 2013. It features a maximum lifting weight of 3,350 kg and a vertical movement speed ranging from 3 to 10 m/min. The system includes two towers with racks for 80 containers, each with a maximum load capacity of 3,000 kg. If you are looking to get high-quality material handling capabilities, consider the DimaSimma EMS-30 TWIN machine we have for sale. Contact us for further details.

This 5-axis TOPEDM TSH-400T CNC EDM machine was manufactured in 2012. It features an X-axis travel of 400 mm, Y-axis travel of 400 mm, and Z-axis travel of 390 mm. The machine includes a stainless steel table size of 480 × 458 mm and an automatic electrode changer with 21 positions. If you are looking to get high-quality spark erosion hole drilling capabilities, consider the TOPEDM TSH-400T die-sinking EDM machine we have for sale. Contact us for further details.

Flywheel size: SAE4, 2 units available; Gross weight [kg]: 87; Accessories: Including: 3 current transformers

Transnorm curved roller conveyor 180°-900-800 IR800 RA2233 Technical data: Manufacturer: Transnorm Type: TS 2712 curved 180° Built: 2001 Condition: good (used) Engine: fully functional Angle: 180° Inner radius RN: 800 mm (nominal radius) Outer width: 900 mm Clamping length: 800 mm Engine Type: SEW Gear Motor, R17DT71D4/TH Engine Power: V 380-500, kW 0.37 Drive: chain drive Conveyor speed: contact us Weight: 260 kg Scope of delivery: without supports Optionally available: Supports Lateral guide on one and both sides Frequency inverter for stepless speed change Length adjustment (longer/shorter) Other roller conveyors/roller curves with chain transmission Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Drive type: Chain overdrive Construction year: 2001 condition: good (used) Nominal / inner radius in mm: 800 Nominal / outside width in ...

SPECIFICATIONS: Spindle: Ø 35 mm Manual adjustment Engine brake Installed power 5.60 kW

; Gross weight [kg]: 1574; Accessories: SAE 1

: gebraucht : 2411 : China : 120 € : 1 : 100 mm : 40 mm : 108 mm : 13 kg MINT CONDITION drilling machine vice (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Telestack Model: TS 1042 Task: - Material: Wood chips - Max. Feed Piece Size: 0-80 mm, max. 100 mm - Max. Bulk Density: Approx. 0.4 t/m³, max. 0.5 t/m³ - Average Capacity: Approx. 225 t/h, max. 250 t/h - Moisture Content: 20% - Description of Use: Stockpiling of wood chips in storage boxes Technical Specifications: - Receiving Box: Designed for material transfer from screening, crushing, or belt systems - Pick-up Height: Approx. 3,000 mm (depends on the conveying angle) - Max. Feed Grain: 100 mm - Height Adjustment: Hydraulic height adjustment and telescopic device from the control panel - Belt Length: Up to approx. 42,720 mm - Max. Discharge Height: Up to approx. 14,520 mm - Belt Specifications: - Smooth belt, 1050 mm wide - Three-layer EP400 4:2 Electric Drive System: - Main Belt: 18.5 KW - Telescopic Belt: 2 x 5.5 KW - Telescopic Drive: 1.1 KW - Electro-hydrauli ...

Bread slicer/continuous machine/industrial version/creel machine Disc thickness 12mm possible product size width max 520 mm, height 140mm with lubrication with inlet belt Output approx. 30 loaves/min with material pusher

Šmeral Trnava Metal Lepa 63 PA Category: Metal Brand: Šmeral Trnava Model: Lepa 63 PA Year of manufacturing: 1988 Under power: Yes 630 kN

The output of the bagging machines varies from 300 – 400 bags/hour. The year yes 2020 uppersilo and weighing unit all performed in stainless steel Roboter und Palettierer 16kg-25 kg Sack Pneumatically actuated bag holders

Control: Heidenhain iTNC 530 Travel: X-axis F/H: 3,220 / 2,600 mm Y-axis 800 mm + 65 mm Z-axis F/H 850 / 1,000 mm T-slots 7 pieces Mount: SK 40 Tool magazine: 100 – compartment Spindle speed: 50 - 12,000 rpm Equipment - Internal cooling (IKZ) 20 bar - Belt filter coolant 1250 l -Conveyor - Laser Tool Control System TM200 - Rinsing gun - Electrostatic exhaust air filters - Electronic handwheel -Partition - 2x LTA suction - Prepared for 5th axle

Key data: 500 mm, 8

MACHINE CNC .

Screen Truepress 344N with Trueflow RIP and Trueflow imposition, using processless plates, Tehnotrans cooling and circulating system with automix, ca. 6 mio. impressions. In very good technical condition, under power in the printshop.

Schneider stream delivery tables. standard and extended. Both in production ready condition, for envelope delivery, etc.

degree: 0 working heigth: mm length: mm width: mm depth: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MBO T530 folding machine with stand up feeding with the following units: 1. MBO T 530 -1 53/4-R 2. MBO T530 -2- 53/4 3. MBO stream delivery table The machine is in production ready condition, with a huge amount of serial equipment such as guides, perforation wheels, etc. Available immediately, can ship worldwide.

weight of the machine ca.:15 t

turning diameter:360 mm turning length:520 mm total power requirement:20 kW weight of the machine ca.:3,8 t dimensions of the machine ca.:3 x 2 x 2 m

Key data: 350 mm, 100 mm

Automatic with power gearbox also for high-alloy materials.

heavy gear, for interrupted cutting Cutting height 125 mm Cutting length 400 mm Mitre right + left by 60°

8008 CM Art. item / Anno/Year: 06-01/90, Hz 50, 380 V, 100 KVA 50%, 250 KVA, 8200 Amp 100%, 36000 Amp short circuit, 710 da N pressure, 300 l/h H2O Water Cooling - Made in Italy The spot welding machine was used weekly about 10 years ago and was fully operational at that time. The machine can be connected at any time and can be checked by qualified personnel by the potential buyer with the product to be manufactured in the future. The machine can be picked up at the current location – as it stands – without warranty and other services for 2800.00€ VHB or shipped plus shipping costs. Alternatively, we can have the machine checked by external specialists, in which case the price is approx. 4500,00€.

Manufacturer: TEDOM Model: FLEXI 250 Year of Manufacture: 2022 Type of Machine: Combined heat and power plant (CHP) Primary Circuit - Nominal Heat Output: 369 kW - Max. Permissible Pressure: 3.5 bar - Max. Permissible Temperature: 95°C - Category: II - Nominal Size: 100 - Fluid: Water-Ethylene Glycol - Volume: 350 L Secondary Circuit - Nominal Heat Output: 369 kW - Max. Permissible Pressure: 10 bar - Max. Permissible Temperature: 90°C - Category: Article 4, Section 3 - Nominal Size: 80 - Fluid: Water-Propylene Glycol - Volume: 56 L Reversible heat pump Manufacturer: Mitsubishi Model: NX2-N-G06 /A /0606 Type: Reversible, air-cooled heat pump Function: Heating and cooling Power Supply: 400V / 3-phase / 50Hz Find more here - / Contact us at -

turning diameter:360 mm turning length:520 mm total power requirement:20 kW weight of the machine ca.:3,8 t dimensions of the machine ca.:3 x 2 x 2 m

faceplate diameter: 4000 mm swing diameter: 4300 mm turning height: 1750 mm slide adjustment: 1000 mm table load: 18 t turning speeds: 43,7 U/min Control: Siemens type: 840 D mm Rest: 2 chip conveyor: ram head dimension: 250x250 mm live tooling: 36 kw total power requirement: 85 KVA weight of the machine ca.: 64 t dimensions of the machine ca.: 8x5,8x8 m The machine is currently designed to machine rings, but can be converted again for machining large parts. The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the machine prior to the sale, our terms and conditions of sale apply exclusively. About us More than 400 own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 10,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then c ...

max. format 72 x 106 cm Built in 1967 automatic punching cylinder Letterpress cylinder converted to a punching cylinder Stack Feeder Shed Feeder Stack delivery Delivery date: immediately Price on request. We deliver and install worldwide!

Folding machine Make MBO Model T400X Year 1998 Maximum size 420 x 630 mm Configuration Feeder Flatpile feeder 1st station 4 plate buckles 420 mm 2nd station knife fold Delivery belt delivery Details with batch counter, noise hoods, vacuum pump, HSS glue computer only Available direct

We are offering for sale a Chamber belt system with shrink tank. LikeNEW! Barey used CHAMBER BELT VACUUM MACHINE Model: Conveyor Pro 1065 Packable Products - Meat - Sausages - Cheese - Fish - Fruits - Vegetables - Ready meals - Mechanical components - Electronic components Technical Data - Structure: Stainless Steel AISI 304 - Control Panel: 7" PLC Touchscreen - Dimensions (L×W×H): 2741×1237×1645 mm - Weight: 900 kg - Inner Vacuum Chamber Size: 1110×840 mm - Usable Lid Height: 250 mm (Optional: 150-200-320 mm) - Sealing Bars: 1 or 2 × 1000 mm - Distance Between Sealing Bars: 670 mm - Sealing Type: Monoseal or bi-active, double seal or wide sealing - Conveyor Belt Speed: Variable, up to 40 m/min - Vacuum Pump: 1 or 2 × 300 m³/h (7.5-15 KW) + Booster 500 or 1000 m³/h (5.5 KW) - Final Vacuum Degree: 1 mbar absolute - Power Supply: 400V - 3PH + N + PE - 50Hz - 3KW (without pum ...

turning diameter:500 mm turning length:1000 mm weight of the machine ca.:7,3 t dimensions of the machine ca.:6,5 x 4,45 x 2,21 m

working area: mm speed: m/min Bar length: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ID3466 Löffler TB800-CNC3 year/Year of construction 1994 Bridge saw with Pellegrini rotary table and roller tilting table Bridge saw with Pellegrini turntable and roller tilting table

Evaporator Thermofin Type: TEN071.1-D-2-7 Cooling capacity: 37.3 kW at DT8, 29.6 kW at DT7 Fin spinning: 7 mm Fans: 2 x 710 mm Dimensions: 3450 x 850 x 110 mm Volume: 52 L Weight: 380 kg Quantity in stock: 4 Reference number: CH 534 Condition: Used in good condition, evaporator 100% tight under nitrogen, fans working, ready to work Price on request. We have many others machines for meat industry and cooling - handtmann, seydelmann, viessmann, bitzer, copeland, . Check our offers.

centre height:500 mm centre distance:2000 mm control:CNC Grundig Numerik total power requirement:400 V, 50 Hz, 22,5 kW weight of the machine ca.:3300 kg dimensions of the machine ca.:2500 x 4000 x 2400 mm

x-travel:630 mm y-travel:200 mm z-travel:360 mm total power requirement:7,5 kW weight of the machine ca.:2,5 t dimensions of the machine ca.:1500 x 1800 x 1900 mm spindle taper:SK40 table-size:250 x 1100 mm

Evaporator Thermofin Type: TEN071.1-F-2-7-HG Cooling capacity: 52.1 kW at DT8, 39.3 kW at DT7 Fin spinning: 7 mm Fans: 2 x 710 mm Dimensions: 3450 x 1000 x 1120 mm Volume: 86.66 L Weight: 460 kg Quantity in stock: 5 Reference number: CH 533 Condition: Used in good condition, evaporator 100% tight under nitrogen, fans working, ready to work Price on request. We have many others machines for meat industry and cooling - handtmann, seydelmann, viessmann, bitzer, copeland, . Check our offers.

horizontal pressure tank, steel tank with inner coating Can be used underground with anti-corrosion coating, e.g. for extinguishing water or rainwater Volume: 45,000 L Dimensions: Ø 2.80 × 7.70 m long On request and as required, the tank can be equipped with a brand-new dome, fire brigade connections and suction line. Inlet and overflow, water level gauge, anti-vortex plate, etc. can be offered additionally. In addition, the tank is treated with a new external coating (anti-corrosion). Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

TURBOCHARGER ABB TPS48-E01

TURBOCHARGER ABB TPS48-E01

TURBOCHARGER ABB TPS48-F33

press capacity:950 kN control:Siemens S7 Required air-pressure:6 bar loading area:1200 x 600 mm Pressure power:1000 kN total power requirement:18 kW weight of the machine ca.:6200 kg dimensions of the machine ca.:2600 x 1300 x 3100 mm

Manufacturer: APV Gaulin Type: MC 120-2.5 TPS Serial No.: 95 l 34612 Year of Make: 1995 Conversion to NanoValve for more efficient homogenization Capacity: 15,000 - 19,000 l/h Operating pressure: 250 bar Condition: good, fully functional

TURBOCHARGER ABB TPS52-D01

TURBOCHARGER ABB TPS52-D01

sheet width:3050 mm plate thickness:4 mm total power requirement:9 kW weight of the machine ca.:6 t dimensions of the machine ca.:3900 x H 1850 x T 2100 mm