capper t cap used for sale

Flatpile Feeder, 4 Pockets, 1 Knive, Delivery

Pneumatic cylinder holder, swivel flange, air cylinder holder, pneumatic piston holder, air piston holder -Type: SNGB-160 TN34547 -Quantity: 2 pieces available -Price: per piece -Weight: 3.3 kg/piece

1 of used trayshrinkpacker, make KHS/Kisters, type TSP 080V, new 2002. Operating side: right. Siemens S7 controls with Bosch/Rexroth/Indramat Servos. Capacity upto 80 cycles/minute. Originally used to pack 330/355 ml standard (D 66 x H 115/122 mm) beverage cans loose and pre-packed as either 6x3=18 or 6x4=24 on tray + film. Last used for 500 ml PET bottles (D 64 x H 204 mm) as 4x3=12 on tray + film.

hydraulic unit, hydraulic pump, hydraulic pump -max. pressure: 200 bar -Liter output: 6 l/min per pump -Drive: 0.55 kW 1360 rpm -hydraulic tank -Number: 4x units available -Price: per piece -Weight: 95 kg

Technical data: Capacity, ton 1000 Ram stroke, mm 400 Max. ram strokes per min. 20 Shut height,mm 1000 Ram adjustment, mm 320 Table size, mm 3150 x 1800 Ram size (front-to-back), mm 1700 Column gap size, mm 1500 x 1900 Bolster plate thickness, mm 250 Ram travel to its extreme position where it develops nominal capacity, mm 12 Pneumatic cushion capacity, ton 200 Pneumatic cushion stroke, mm 200 Upper knock-out capacity, ton 50 Main motor power, kW 132 Press dimensions, mm 5150 x 4700 x 7830 Press weight, kg 200000

Height 2050 mm Width 1500 mm Length 3150 mm Type of breading breading dry breading machine

Handwashing basin, washbasin, weld-in basin, weld-in swivel basin -Stainless steel washbasin -Internal dimensions: 500 x 400 mm -Depth: 250 mm -Edge: 18 mm -Number: 65x available -Price: per piece -Dimensions: 540/440/H250 mm -Weight: 3.7 kg

Handwashing basin, washbasin, weld-in basin, weld-in swivel basin -Stainless steel washbasin -Internal dimensions: 500 x 400 mm -Depth: 300 mm -Edge: 18 mm -Drain: Ø 60 mm -Number: 26 available -Price: per piece -Dimensions: 540/440/H300 mm -Weight: 4.3 kg

TOOLMET GATO GC-G-M-2040 oxy-fuel cutting machine was built in 2020 in Poland by Toolmet Sp. z o.o. This extremely efficient machine is an excellent choice for businesses placing emphasis on high accuracy and repeatability of the produced parts. It enables precise, 4-axis shape cutting of workpieces made of thick steel sheets. The machining process is performed fully automatically by means of a reliable gas torch according to pre-programmed cutting programmes. The work table with a length of 4000 mm and width of 2000 mm is equipped with a sectional extraction system with 6 pneumatically controlled sections. This solution effectively eliminates any contamination generated during the cutting process, ensuring a high level of safety and great user comfort. In order to guarantee smooth movements and high positioning accuracy, a lubrication-free drive system and powerful servo motors in all l ...

Used proofing interrupter HEIN, type: Topline -In bakery condition- - new refrigerant 2022 - in operation until the end - Sale by closing the bakery - Plant still assembled Viewing possible.

Direct from meat-free facility. Perfect for making texturised meat-like products as well as petfoods, pizza toppings, ready meal ingredients etc.

We offer Doka Eurex 30 top 350 Original Doka rental storage quality. Supports cleaned and checked. Doka Eurex 30 top 350, used - 52,90€/piece Doka Stacking Pallet 1.55m x 0.85m, used = 115.00€/piece The extra-durable ceiling support with impact protector The robust and durable Eurex 30 top slab prop impresses with a high minimum load capacity of 30 kN and complies with column class C/E according to the EN 1065 standard. The integrated impact protector reliably protects the stud tube from mechanical damage and significantly increases the service life of the steel tube support. If you have any questions, please call 0049 176 70044689 Mr. Becker Offer only valid while stocks last. Subject to prior sale. Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Beck ...

We offer Doka Eurex 30 top 550 Original Doka rental storage quality. Supports cleaned and checked. Doka Eurex 30 top 550, used - 79,90€/piece Doka Stacking Pallet 1.55m x 0.85m, used = 115.00€/piece The extra-durable ceiling support with impact protector The robust and durable Eurex 30 top slab prop impresses with a high minimum load capacity of 30 kN and complies with column class C/E according to the EN 1065 standard. The integrated impact protector reliably protects the stud tube from mechanical damage and significantly increases the service life of the steel tube support. If you have any questions, please call 0049 176 70044689 Mr. Becker Offer only valid while stocks last. Subject to prior sale. Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Beck ...

ATOM Beam Cutting Press Model S325 T25 Capacity load 2500kg Working width 1600mm Working depth 600mm Max. pressure 25T Daylight between platens 400mm Max. stroke 350mm Motor 380/415V KW4 50Hz Year 1995 CE marked With manual

Has been used for small chubs of cheese.

MDR 2000 Rheometer Manuf.: Alpha Model 81001 220V 5amps Power 1000 VA Air pressure required PSI 120 max. / 70 min.

Fully Automatic Bread Slicing Machine Manufacturer: TREIF Type: DISKUS – SB Technical data: Round knife cutting bread slicer Oil-free cutting even of warm breads 3 cutting thicknesses selectable: 8mm, 10mm and 12mm Bread passage: L 380 x H140-160 x D280 mm Automatic bread gripper suitable for all types of bread with bread rack for bagging with sight glass cover for optimum safety during the cutting process Easy cleaning without having to move the machine 400 volts / 0.9 kW / 10 A Dimensions: H110 x W90 x D76 cm Weight: 200 kg Mobile on 4 pulleys with 2 brakes Year of Make: 2010 Function checked, machine is thoroughly cleaned and ready for immediate use! Condition, see original pictures! If you have any questions, email or call.

Three Roll Calender Manufacturer Iddon Bros. ‘I’ shape stack vertical Roll width 54” (1350mm) x 22” (550mm) diam. Even speed Rotary joints for steam heated rolls for water cooling Electrical speed controls with electric autostop Motorised roll stack at the end of the Calender Complete with gearbox, 45kW motor and starter panel The Calendar runs well and goes down to .8mm thick The Calender is mounted on a one-piece fabricated bed plate

We offer a refurbished Peri Trio 330 - 126.52m² with 65% discount - newly occupied Frame cleaned, corrosion sealed with zinc phosphate coating. New original Peri Finply formlining. Accessories new, or Peri rental storage quality available on request. New value approx. 72,134.00€ Special net price: 25.246,90€ Pcs. Description 10 Elements TR /4 330 x 240 - New Plate 7 elements TR /4 330 x 120 - new plate 3 elements TR /4 330 x 90 - new plate 2 elements TR /4 330 x 72 - new plate 2 elements TR /4 330 x 60 - new plate 2 elements TR /4 330 x 30 - new plate If you have any questions, please call 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. ...

Transnorm angled-belt conveyor 45° 1500-1250-1000 RA1850 Exhibit Make: Transnorm Year of manufacture: 2018 Inlet angle: 45 Length center: 1500 mm Belt width (RB): 1000 mm Frame height: 270 mm Nominal/external width (NB): 1250 mm Conveying speed: 0.717 mm V230/400 kW 1,5 Overall height side wall: 300 mm Scope of delivery: with motor and side guides (if required, please ask) Optional: Supports Frequency converter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: scope of delivery: including side guides without supports Construction year: 2018 angle: 45° KW: 1,5/S1 Electric data: 220-240, 380-400 condition: Ausstellungsstück Conveying length in mm (NL): 1500 Frame width in mm (NB): 1250 Belt width in mm (GuB): 1000 Bauhöhe in mm (BH): 270 Antrieb: SEW Getriebemotor Optional erhältlich: Movi-Mot For individual ...

Fully automatic system for filling nested disposable syringes and closing with plunger stoppers, consisting of 4 Bausch+Ströbel components: • TUM 9070 Tub unpacking machine for removing the cups from the bag using a sliding device • DVE 9070 Cover and protective film removal • SFM 5072 Filling and sealing machine • NTS 8140 Transport system • Output max. 36,000 disposable syringes/h, infinitely adjustable • For disposable syringes 0.5 - 10 ml depending on format set • For plunger stoppers diam. 5.00 - 21.00 mm, H 7.00 - 15.00 mm depending on format set • For 100 mm nest • For tub H max. 130 mm • Parts in contact with the product made of stainless steel AISI 316L • IQ/OQ qualification documentation in accordance with Annex D5 GAMP 5 and Annex 15 EU-GMP in English • Calibration (KAL) for all process-relevant measuring systems • Material specification • PLC Siem ...

Condition Used Stock Number 3350P Tetra Pak Laval Hoyer extrusion line Type ARB.BORD IND Tetra Pak Laval Hoyer extrusion line Serial number 348-5214 Tetra Pak Laval Hoyer extrusion line Year of construction 1998 Tetra Pak Laval Hoyer extrusion line Capacity 27000 sandwiches/hr Tetra Laval Food Hoyer spiral freezer Type ST LINE 1100 Tetra Laval Food Hoyer spiral freezer Serial number 348-1023 Tetra Laval Food Hoyer spiral freezer Year of construction 1998 Tetra Laval Food Hoyer spiral freezer Refrigerant NH3, Ammonia Tetra Laval Food Hoyer spiral freezer Evaporator 2 pc. Retech GLS 50-18-280 Tetra Laval Food Hoyer spiral freezer Tetra Pak Laval Hoyer dip and transfer unit 12 lane Tetra Laval Food Hoyer spiral freezer Type HOYWRAP MW1200-6 Tetra Laval Food Hoyer spiral freezer Serial number Z415.3872 Tetra Laval Food Hoyer spiral freezer Year of construction 1998 Tetra Pak H ...

THERMO SCIENTIFIC 8000 WJ CO2 Incubator / Oven Water Jacket Technology (WJ) Model 3429 Capacity: 184L CO² range: 0 to 20% CO² inlet pressure: 103.4 kPa. CO₂ sensor: CT Temperature range: +5°C UT to +50°C. HEPA filter inside. Glazed interior door. Aluminum control panel with digital display. 4 stainless steel shelves 1 container of water External dimensions HxWxD: 100x66x60cm. Interior dimensions HxWxD: 68.1 x 54.1 x 50.8 cm. 230V 50/60Hz. Net Weight: 120.2 kg Equipment tested at 37°C with a CO2 level of 5% In excellent working order and aesthetics Slight rust marks on the back of the outer shell (see photos) HEPA filters will need to be replaced The equipment will be delivered with the water jackets emptied. It is imperative to fill them in before you can use the equipment according to the manufacturer's recommendations Year of Manufacture: 2009

power capacity: - kW volt: - V ampere: A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Thermo Scientific Multidrop 832 Microplate Dispenser The Multidrop 384 is an automatic, programmable eight-channel microplate dispenser. It features a peristaltic pump for fast, continuous dispensing of liquids into 96- and 384-well microplates. Microplate Dispenser 96 and 384 Precision, speed and reliability in distribution. Possibility of distribution by selecting the number of columns. External dimensions: 31x32x18 cm Weight: 7Kg Dispensing accuracy: 5 μL: ±3% (typical) 20 μL: ±2% (typical) 100 μL: ±1% (typical) Dispensing speed: 96-well plate: 20 μL in 5 seconds; 50 μL in 8 s 384-well plate: 20 μl in 20 s; 50 μl in 25 s Year of manufacture: 2005

Distance between points: 1000 mm, Ø max to be rectified: 350 mm, Max travel Z axis: 1.180 mm, Max travel X axis: 350 mm, Height of points: 180 mm, Ø max to be rectified with the left wheel: 350 mm, Left grinding wheel dimensions (od x id x width): Ø450xØ203x80 mm, Working wheel dimensions (od x id x width): 508x203.2x80mm, Right grinding wheel dimensions (od x id x width): Ø300xØ127x40 mm, cnc brand: FANUC, cnc model: 18TC, Main engine power: 7.5 Kw, Maximum weight between points: 120 Kg, Total installed power: 15 KW, Standard peripheral speed: 45 m/s, Automatic grinding head rotation with Hirt 2.5º: +5º_-180º, B axis control system: Incremental encoder + 2.5º Hirt ring, B axis motor: 2.5 Nm at 3000 rpm, X axis speed: 10,000 mm/min, X axis resolution: 0.0005 mm, Z axis speed: 10,000 mm/min, Z axis resolution: 0.005 mm, Z axis table rotation: 0º_9º, Workpiece head cone: MORSE  ...

; Gross weight [kg]: 1550; Engine: Deutz TD2.9L4-SV; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : Coolant heater and battery charger; Water Tank Volume [l]: 250

; Gross weight [kg]: 1550; Engine: Deutz TD2.9L4-SV; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : Coolant heater and battery charger; Water Tank Volume [l]: 250

Laminator - paper over board Make Tùnkers Model S-1100 Year 2002 Workingwidth 1100 mm Substrate Feeder automatic suction feeder Details with pressing roll & pressing belt, spot label, vacuum belt, pressing belt Delivery delivery on a table OPTIONS we can deliver the machine with spot label functionn OR with lamination station, OR both, and even with a second glue station for triplle layer Condition can be purchaased `as-is`or refurbished on most parts (ask details) Available Direct or very soon

MWM TCG 2020 V12 Natural Gas Generating Set. Capacity: 1,235 kW Fuel: Natural Gas Year: 2011 Hours: 29,000 Voltage: 400 V Frequency: 50 Hz Scope of supply: Engine, Alternator (Marelli), Engine Panel, Control Panel, Gasline, Heat Exchanger. Photos are for illustration purposes only. Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.

Transnorm angled-belt conveyor 30° 1750-1000-800 RA2305 NEW Make: Transnorm Year of manufacture: 2022 Inlet angle: 30 Length center: 1670 mm Belt width (RB): 800 mm Frame height: 300 mm Nominal/external width (NB): 1000 mm, 1200 mm with motor Conveying speed: with Frequency converter for infinitely variable speed control between 0.25-0.75 mm/s, V230/400 kW 2,2 Overall height side wall: 200 mm Scope of delivery: with motor and side guides Optional: Supports Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: angle: 30° scope of delivery: including side guides without supports, inklusive Frequenzumrichter condition: Ausstellungsstück Antrieb: SEW Getriebemotor Electric data: 380-400 Bauhöhe in mm (BH): 300 KW: 2,2 Belt width in mm (GuB): 800 Optional erhältlich: Füße Construction year: 2022 Conveying length in mm (NL): 1670 Frame width in mm (N ...

Transnorm curved belt conveyor left 45°-950-800-IR900 RA2306 Technical data: Frame width (NB): 900 mm Frame width with Bearing cover: 950mm Frame width with Bearing cover and Motor: 1250 mm belt width (GuB): 800 mm height (BH): 250 mm Inner radius (IR): 900 mm Conveying angle: 45° degrees conveying speed (v m/s): 0,42-1,50 m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 0,75 / S1 Year of construction: 2022 Height Sideguides: 200 mm Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2022 condition: new Nominal / inner radius in mm: 900 Nominal / outside width in mm: 950 Belt width in mm: 800 angle: 45° Driven: YES Running direction: LINKS Engine type: SEW Eurodrive KW: 0,75/S1 Conveyor speed m / s: freely adjustable scope of delivery: including side guid ...

Transnorm angled-belt conveyor 45° 1400-1050-800 RA2304 Exhibit Make: Transnorm Year of manufacture: 2022 Inlet angle: 45 Length center: 1400 mm Belt width (RB): 800 mm Frame height: 270 mm Nominal/external width (NB): 1050 mm Conveying speed: 0.717 mm/s V230/400 kW 1,5 Overall height side wall: 300 mm Scope of delivery: with motor and side guides (if required, please ask) Optional: Supports Frequency converter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: scope of delivery: including side guides without supports angle: 45° KW: 1,5/S1 condition: Ausstellungsstück Bauhöhe in mm (BH): 270 Antrieb: SEW Getriebemotor Optional erhältlich: Füße, Movi-Mot Electric data: 380-400 Frame width in mm (NB): 1050 Conveying length in mm (NL): 1400 Belt width in mm (GuB): 800 Construction year: 2022 For individual,  ...

230 gt; 400 volt

Tetra Pak Separator H845 – Factory New High-Capacity Milk Separator The Tetra Pak Separator H845 is a high-performance industrial separator designed for hot milk processing in dairy production facilities. Built with Tetra Pak AirTight technology, this separator ensures gentle product handling, minimal oxygen intake, and reduced product losses, making it ideal for modern dairy processing plants. This factory-new unit, designed in 2024, has never been installed or used in production, offering manufacturers the opportunity to acquire premium Tetra Pak technology in unused condition. General Information - Manufacturer: Tetra Pak - Model: Separator H845 - Condition: Factory new - Year of Design: 2024 - Installation Status: Never installed / never used in production Technical Specifications - Application: Hot milk separator - Processing Capacity: up to 40,000 l/h - Air Pr ...

Content: 1.000 Ltr. Working pressure: Max. steam pressure 1.1 bar at 50°C, 1.3 bar at 55°C Material: Stainless steel, 1.4404 inner tank, 1.4301 frame and outer jacket Design: cubic, upright, on 4 feet, with welded construction for access by forklift or pallet truck, Insulating jacket with perlite insulation, electrically heated up to 120 °C, 2,000 W, 230 V, Inner tank lined with ETFE coating Spout with disc valve DN 80 reduced to DN 50, cover DN 400, 1 x Safety Valve, 1 x Camlock Coupling 1", Total weight 381 kg Last Purpose: Food Height: approx. 1,670 mm Width/Length: approx. 1,200 mm/1,100 mm

Milk Homogenizer Capacity 20.000 lt/h Motor: 90 kW 2 stages Hydroulic control

grinding diameter: 630 mm grinding length: 4000 mm centre height: 335 mm total power requirement: 28 kW weight of the machine ca.: 15 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping force: 400 kN injection volume: 125 cm³ screw diameter: -- mm platen size: 550 x 400 mm Condition: used, Specification: C-frame injection moulding machine for TPV - second-hand, Modell TTV-C40-125 C40P01B clamping unit: - Clamping unit: vertical - Tonnage: 40 t - clamping force: 400 kN - Heating platen size: 550 x 400 mm Injection unit: - Injection volume max.: 125 cm³ - Connected load: 3x 400 V, 50 Hz 90A fuse protection Approx. dimensions: 1,550 x 1,050 x 3,120 mm Weight approx.: 3,200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For sale I offer a Tractel grab hoist T516D. The grab hoist is an unused exhibit with slight traces of storage, which can be seen in the pictures. The grab hoist is sold with a new UVV test. Ropes can be offered on request Dates: - The T 516 D grab hoist is a powerful hand rope hoist for pulling, lifting, lowering, tensioning and securing loads - Load capacity 1600kg - Length, height, depth without hook 523x315x127mm - Rope diameter 11.5mm - Weight 13.5kg without rope Shipping available for an extra charge. Grab hoist is workshop-tested and immediately ready for use. Supplied with lever tube, without reel and without rope # Grab hoist # Lever hoist # Multi-purpose hoist # Tractel # T516 # T500 series # 1600kg # 1.6to

For sale I offer a Tractel grab hoist T532D. The grab hoist is an unused exhibit with slight traces of storage, which can be seen in the pictures. The grab hoist is sold with a new UVV test. Ropes can be offered on request. Dates: - The T 532 D grab hoist is a powerful hand rope hoist for pulling, lifting, lowering, tensioning and securing loads. - Load capacity 3200kg - Length, height, depth without hook 620x355x130mm - Rope diameter 16.3mm - Weight 24kg without rope Shipping available for an extra charge. Grab hoist is workshop-tested and immediately ready for use. Supplied with lever tube, without reel and without rope. # Grab hoist # Lever hoist # Multi-purpose hoist # Tractel # T532 # T500 series # 3200kg # 3,2to

Mettler Toledo RE40D Digital Refractometer RE digital refractometers are ideal for measuring the refractive index, Brix, and concentration of aqueous solutions, such as glycerol, propylene glycol, and acetone. They determine the refractive index by a method based on total reflection, which allows for accurate measurement even for cloudy or dark samples. These refractometers are equipped with built-in and compact Peltier thermostats for temperature control; No water bath is required. They require small sample volumes (0.2 mL) and are easily calibrated with water or certified standard solutions. Measurement range nD: 1.32-1.70 Brix measuring range: 0-100% Accuracy nD: 0.0001 Brix accuracy: 0.1% Temperature range: 15°C to 70°C (59°F to 158°F) Typical measurement time: 15 seconds Power supply: 110-240 V, 50/60 Hz With RS-P42 printer Equipment tested

Used KRONES 32.000 bph one-way PET filling line Former products: Carbonised water, CSD, energy drinks Scope of machines: NEA high-pressure compressor (approx. 9,000 operating hours) NEA high-pressure compressor (approx. 18,000 operating hours) 2001 LOHENNER compressed air tank 5,000 Ltr. 2001 MTA RWD350C dry recooler (roof / outdoor installation) 2001/2002 MUCKI MD-3 preform feeder with tipper with 500 kg load capacity 2001/2001 TANNER SBT-2212 preform hopper with unscrambler 2001/2001 TANNER HFT-3510 preform vertical conveyor 2001/2001 TANNER preform sorter incl. ejection unit 2001/2001 TANNER AST-3006 preform slide incl. air rinser 2001/2001 TANNER VZT-2500 electrical cabinet 2001/2001 SIG COROPLAST BLOWMAX 12 stretch blow molding machine, max. 18,000 bph - (One blowing machine must be replaced!) 2001/2001 RIEDEL PC 630.01-NE preform cooler 20 ...

Used Bag-in-Box GANDRA TEC 500+ : 3L/ 5L / 10L / 20L Automatic. For automatic hot or cold bottling of fruit juices, vegetables, wines, etc. Supported packages: 3L, 5L, 10L, 20L. Bag Entry It is done automatically from the tape or manually. Vacuum generation and nitrogen input after pouring are standard. Equipped with a bag counter and a liter counter. Picking up the filled bags into the machines is done manually. Manufacturer: Gandra Model: TEC 500+ Year of manufacture: 2017 Recently, she poured NFC apple juice Capacity: Up to 500 bags with a capacity of 3 liters per hour • 400V/50Hz power supply; 2 kW • Air pressure 6 bar • Installed power – 1.5 kW

saw blade diameter: 20-200 / 30-300 mm workpiece-spindlehead motor: 0,3 kW grinding wheel diameter: - mm total power requirement: 4 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 4 x 2,5 x 1,5 m No. 1532 Workbench system with 7 saw blade grinding machines and integrated grinding dust extraction system Working width: 20-200 / 30-300 mm Drive power: 0.25/0.3 kW Workbench with base cabinets and various tools Integrated dust extraction for each workstation in the workbench Weight approx. 1100 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Electric Lifter, Capacity: 1500 KG

Mast: VFHM 435-0A7, Integral Sideshift, 1000mm Forks, Black Solid Tyres, LPG, Power: 25 KW, Own Weight: 2780 KG, Capacity: 1750 KG

1997 Folding machine T 500-4/4 first unit pile feeder 4 buckles second unit 4 buckles delivery A56/DC available: immediately Location: Germany