131,088 used machines on RESALE, but how to find them? Machine Search
grinding diameter: 630 mm grinding length: 4000 mm centre height: 335 mm total power requirement: 28 kW weight of the machine ca.: 15 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
clamping force: 400 kN injection volume: 125 cm³ screw diameter: -- mm platen size: 550 x 400 mm Condition: used, Specification: C-frame injection moulding machine for TPV - second-hand, Modell TTV-C40-125 C40P01B clamping unit: - Clamping unit: vertical - Tonnage: 40 t - clamping force: 400 kN - Heating platen size: 550 x 400 mm Injection unit: - Injection volume max.: 125 cm³ - Connected load: 3x 400 V, 50 Hz 90A fuse protection Approx. dimensions: 1,550 x 1,050 x 3,120 mm Weight approx.: 3,200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
For sale I offer a Tractel grab hoist T516D. The grab hoist is an unused exhibit with slight traces of storage, which can be seen in the pictures. The grab hoist is sold with a new UVV test. Ropes can be offered on request Dates: - The T 516 D grab hoist is a powerful hand rope hoist for pulling, lifting, lowering, tensioning and securing loads - Load capacity 1600kg - Length, height, depth without hook 523x315x127mm - Rope diameter 11.5mm - Weight 13.5kg without rope Shipping available for an extra charge. Grab hoist is workshop-tested and immediately ready for use. Supplied with lever tube, without reel and without rope # Grab hoist # Lever hoist # Multi-purpose hoist # Tractel # T516 # T500 series # 1600kg # 1.6to
For sale I offer a Tractel grab hoist T532D. The grab hoist is an unused exhibit with slight traces of storage, which can be seen in the pictures. The grab hoist is sold with a new UVV test. Ropes can be offered on request. Dates: - The T 532 D grab hoist is a powerful hand rope hoist for pulling, lifting, lowering, tensioning and securing loads. - Load capacity 3200kg - Length, height, depth without hook 620x355x130mm - Rope diameter 16.3mm - Weight 24kg without rope Shipping available for an extra charge. Grab hoist is workshop-tested and immediately ready for use. Supplied with lever tube, without reel and without rope. # Grab hoist # Lever hoist # Multi-purpose hoist # Tractel # T532 # T500 series # 3200kg # 3,2to
Mettler Toledo RE40D Digital Refractometer RE digital refractometers are ideal for measuring the refractive index, Brix, and concentration of aqueous solutions, such as glycerol, propylene glycol, and acetone. They determine the refractive index by a method based on total reflection, which allows for accurate measurement even for cloudy or dark samples. These refractometers are equipped with built-in and compact Peltier thermostats for temperature control; No water bath is required. They require small sample volumes (0.2 mL) and are easily calibrated with water or certified standard solutions. Measurement range nD: 1.32-1.70 Brix measuring range: 0-100% Accuracy nD: 0.0001 Brix accuracy: 0.1% Temperature range: 15°C to 70°C (59°F to 158°F) Typical measurement time: 15 seconds Power supply: 110-240 V, 50/60 Hz With RS-P42 printer Equipment tested
Used KRONES 32.000 bph one-way PET filling line Former products: Carbonised water, CSD, energy drinks Scope of machines: NEA high-pressure compressor (approx. 9,000 operating hours) NEA high-pressure compressor (approx. 18,000 operating hours) 2001 LOHENNER compressed air tank 5,000 Ltr. 2001 MTA RWD350C dry recooler (roof / outdoor installation) 2001/2002 MUCKI MD-3 preform feeder with tipper with 500 kg load capacity 2001/2001 TANNER SBT-2212 preform hopper with unscrambler 2001/2001 TANNER HFT-3510 preform vertical conveyor 2001/2001 TANNER preform sorter incl. ejection unit 2001/2001 TANNER AST-3006 preform slide incl. air rinser 2001/2001 TANNER VZT-2500 electrical cabinet 2001/2001 SIG COROPLAST BLOWMAX 12 stretch blow molding machine, max. 18,000 bph - (One blowing machine must be replaced!) 2001/2001 RIEDEL PC 630.01-NE preform cooler 20 ...
Used Bag-in-Box GANDRA TEC 500+ : 3L/ 5L / 10L / 20L Automatic. For automatic hot or cold bottling of fruit juices, vegetables, wines, etc. Supported packages: 3L, 5L, 10L, 20L. Bag Entry It is done automatically from the tape or manually. Vacuum generation and nitrogen input after pouring are standard. Equipped with a bag counter and a liter counter. Picking up the filled bags into the machines is done manually. Manufacturer: Gandra Model: TEC 500+ Year of manufacture: 2017 Recently, she poured NFC apple juice Capacity: Up to 500 bags with a capacity of 3 liters per hour • 400V/50Hz power supply; 2 kW • Air pressure 6 bar • Installed power – 1.5 kW
saw blade diameter: 20-200 / 30-300 mm workpiece-spindlehead motor: 0,3 kW grinding wheel diameter: - mm total power requirement: 4 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 4 x 2,5 x 1,5 m No. 1532 Workbench system with 7 saw blade grinding machines and integrated grinding dust extraction system Working width: 20-200 / 30-300 mm Drive power: 0.25/0.3 kW Workbench with base cabinets and various tools Integrated dust extraction for each workstation in the workbench Weight approx. 1100 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Mast: VFHM 435-0A7, Integral Sideshift, 1000mm Forks, Black Solid Tyres, LPG, Power: 25 KW, Own Weight: 2780 KG, Capacity: 1750 KG
1997 Folding machine T 500-4/4 first unit pile feeder 4 buckles second unit 4 buckles delivery A56/DC available: immediately Location: Germany
Key data: 800 KW
Module 2 TCG 2016 V 16 C - 800 kW - 43,636 operating hours -Natural gas - Engine number: 2211009 - Year of construction: 2013 - Complete TEM control system with auxiliary unit control - RMG Gas Line – Natural Gas All service work was carried out by MWM service partners according to the manufacturer's specifications / maintenance plan. Sale due to site conversion and plant renewal. More pictures, information and offers on request. Viewing possible at any time by arrangement. Location: 49811 Lingen / Ems Subject to prior sale
CURSAL TRSI8000 OL700 series parting line consisting of: - automatic loader with 1 column and 3 vacuum suction cups - 6-chain horizontal feeder with singularizer for miter saw - TRSI8000 OL700 cross-cut saw with integrated pusher and length optimizer - CNC sorting discharge belt with 2 ejectors - 2 inclined ways each with 4 idle rollers for side discharge Total overall dimensions about 14 x 5 meters Year 2018, CE regulations, compatibility with industry 4.0 Visible, installed and in operation until August 2025. Delivery availability from September 2025.
Key data: 3200 mm, 750 mm, 695 mm
Basic machine data Used 5-axis machining center from HEDELIUS Make: HEDELIUS Type: Tiltenta 7 Magnum Year of Make: 2016 Condition: very good Control: Name: Heidenhain iTNC 530 Handwheel: Heidenhain Travel: x-axis: 3200 mm // y-axis: 750 mm // z-axis: 695 mm Technical data: • Spindle: 50-12,000 rpm • SK40 interface • Fixed machining table with integrated NC rotary table • Ø table: 750 mm • Max. workpiece weight: 800 kg • B-axis infinitely variable: + 98°/- 98° • 50-fold tool changer • Max. tool length: 330 mm • Feed speeds: up to 40 m/min • IKZ (internal coolant supply) • 500 L tank with paper belt filter • Chip conveyor Prior sale is reserved. No liability is assumed for the technical information provided here. The legal provisions apply.
2005 folding machine first unit pile feeder F510 Counter 4 buckles second unit 4 buckles delivery A56/DC available: immediately Location: Germany
: 1200 mm : 580 mm : 600 mm : 1575x425 mm : SK 40 : 152 mm : 110 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 120 l/min, 12 W, 7
Text
Process air cooler/ chiller/ chiller, air-cooled, Type: TAEevo Tech 121P3-20-FSH Refrigeration Machines, MTA S.p.A. TAEevo Tech 121P3-20-FSH are air-cooled compact water chillers suitable for outdoor installation (-20°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 255 ltr., built-in P3 circulation pump, electric frost protection and a condenser pressure control (winter package -20°C). Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 35 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 5.96 Available pump pressure (bar) 2.67 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 19 Max. Current (A) 33 Starting Current Circuit (A) 165 Protection class: IP54 Dimensions: Length (mm) 1862, Width (mm) ...
Key data: 400 l/min, 5
Coolant tank 20 m3 consisting of 2 tanks that are joined together. From container 1 there is an overflow into container 2. Installation area approx. 2500 x 4000 mm for both containers. Was used as a container for pure oil for the grinding process, so there was no rust at all. Condition very good!
Key data: 400 l/min, 6
Central plant with 2 pieces of automatic centrifuges, operation until February 2019 with oil. The Cleaning system for oil incl. tank 20 m3, is equipped with two automatic centrifuges of 150 m3 each. 200 liters/min. The total capacity of the plant is 300 to 400 liters per minute. Oil or emulsion, with emulsion more than 400 liters possible. Two centrifuges T42 , Clean tank 20 m3 oil (divided into two separate tanks with overflow) incl. pump for Supply of production with pure oil. In addition, the system has a lot of accessories: all spare parts + an old one centrifuge from 1987 as spare parts dispenser, a lifting tipping device for the Sludge emptying of the 200 kg buckets. The sludge ejection runs with this centrifuge automatically into the bucket under the centrifuge. The scope of delivery also includes a additional electrical cabinet for a second system with the sam ...
Process air cooler/ chiller/ chiller, air-cooled, Type: TAEevo Tech 121P3-20-FSH Refrigeration Machines, MTA S.p.A. TAEevo Tech 121P3-20-FSH are air-cooled compact water chillers suitable for outdoor installation (-20°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 255 ltr., built-in P3 circulation pump, electric frost protection and a condenser pressure control (winter package -20°C). Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 35 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 5.96 Available pump pressure (bar) 2.67 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 19 Max. Current (A) 33 Starting Current Circuit (A) 165 Protection class: IP54 Dimensions: Length (mm) 1862, Width (mm) ...
2005 folding machine first unit pile feeder F510 Counter 4 buckles second unit 4 buckles delivery A56/DC available: immediately Location: Germany
Process chiller / chiller air-cooled, Type: CYGNUS TECH CYT 301-BIO – 59.6 kW Refrigeration Machines, MTA S.p.A. CYGNUS TECH CYT 301-BIO are compact water cooling units designed for outdoor installation down to -20°C suction temperature. Including crank tub heating, buffer tank and built-in P1 circulation pump --Optimized for biogas cooling-- Cooling capacity kW 59.6 Cold water temp. Exit/Entry: 7 / 12°C Flow rate m³/h 10.2 Head available bar: 1.68 Ambient temperature °C 32 Refrigerant R 410A Electrical data: Voltage V 400, Frequency Hz 50, Phase Ph 3 Max. power consumption (kW) 30.5 Max. Current (A) 51 Starting Current Circuit (A) 159 Protection class: IPX4 Dimensions: Length mm 2470, width mm 1112, height mm 1595 Weight kg 750 Connection R 2" Serial No.: 2200416573 Year of construction 2024 Condition: Optical 1, Technical 1 (Bearing Machin ...
Process chiller / chiller air-cooled, Type: CYGNUS TECH CYT 301-BIO – 59.6 kW Refrigeration Machines, MTA S.p.A. CYGNUS TECH CYT 301-BIO are compact water cooling units designed for outdoor installation down to -20°C suction temperature. Including crank tub heating, buffer tank and built-in P1 circulation pump --Optimized for biogas cooling-- Cooling capacity kW 59.6 Cold water temp. Exit/Entry: 7 / 12°C Flow rate m³/h 10.2 Head available bar: 1.68 Ambient temperature °C 32 Refrigerant R 410A Electrical data: Voltage V 400, Frequency Hz 50, Phase Ph 3 Max. power consumption (kW) 30.5 Max. Current (A) 51 Starting Current Circuit (A) 159 Protection class: IPX4 Dimensions: Length mm 2470, width mm 1112, height mm 1595 Weight kg 750 Connection R 2" Serial No.: 2200416573 Year of construction 2024 Condition: Optical 1, Technical 1 (Bearing Machin ...
2000 folding machine Round pile feeder 6 buckles T540-2-X mobile knife ASP 66-2 ME (2005) available: immediately Location: Germany
Automatic plate loader Plate processor Automatic delivery. Stacker Program and Dongle Monthly contract serviced
TECHNE MCS-102L 2-Position Magnetic Laboratory Shaker New equipment in its original packaging Reference : MCS-102L This magnetic stirrer is designed for optimal suspension cell culture and the use of micro-carriers. The MCS-102L accommodates 2 x 1 liter culture flasks Speed range from 0 to 80 rpm Soft start and stop for slow acceleration and deceleration Interval setting option Stainless steel stirrer platform with culture flask markings Designed to operate in an incubator up to 40°C and 95% relative humidity Type: magnetic, rotary Display: Analog Applications: of biological samples Rotational speed: Max: 80 rpm (503 rad.min-1) Min: 0 rpm (0 rad.min-1) Temperature range: 40°C (104°F)
TRUMPF TruPrint 3000 3D Printers GENERAL Project No.: 905844 Quantity: 1 pcs. Manufacturer: TRUMPF Type: TruPrint 3000 Year of Make: 2016 Condition: Used machine Approx (hrs): 3571 DESCRIPTION LASER Laser power Preheating substrate plate 200 degrees Diameter buildable area 300 mm Overall height 400 mm 2 pcs. removable construction and storage cylinders Adjustable layer thickness 20-150/1000 mm GENERAL TECHNICAL DATA Mains fuse 32 A Machine dimensions (LxWxH) approx. 3385 x 1750 x 2070 mm Machine weight approx. 4300 kg NOTE Suitable for stainless steels, tool steels, aluminum, nickel-based or titanium alloys We have described the named product with the greatest possible care. However, since this does not come from our production, the data mentioned and the equipment details may differ. We therefore ask you to consider the description as non- ...
9 rolls of 3,048m each Price per m new, partly original packaging
Transnorm belt curve conveyor left GKF 90°-600-400-IR1000 - NEW RA2307 Technical data: Frame width (NB): 600 mm Frame width with Bearing cover and motor: 850 mm belt width (GuB): 400 mm height (BH): 220 mm height with motor (MH): 350 mm Inner radius (IR): 1000 mm Conveying angle: 90° degrees Conveying speed (v m/s): 1,0m/s Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 / S1 Year of construction: 2021 Height Sideguides: 194 mm Optionally available: Supports Frequency converter for stepless speed control Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstreet 11 B & C, 97076 Würzburg Features: Construction year: 2021 condition: new Nominal / inner radius in mm: 1000 Nominal / outside width in mm: 600 Belt width in mm: 400 angle: 90° Driven: YES Running direction: LINKS Engine type: SEW Eurodrive KW: 0,75/S1 Conveyor speed m / s: 1,0 scope of ...
Curved plate chain with attachable gripper material LFG and NFG as good as new, partly in original packaging Number and lengths see pictures Price per m
Key data: 1176 KW, 1650 1/min
This marine propulsion engine lacks a connecting rod, piston and liner A cylinder head and a turbocharger is damaged
Adjustable air circulation Pneumatically controlled fresh air, exhaust air, and smoke damper Cleaning: foam cleaning Smoke feeding: on customer request Smoking material: wood chips Without the after-burning system
table diameter: - mm table load: - t table height: - mm Control: - total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m CNC Swivel Rotary Table/ CNC Dividing Apparatus incl. Tailstock The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 420 mm turning length: 600 mm control: Sinumerik 810D spindle turning speed range: 4200 U/min spindle motor: 18 kW spindle bore: 65 mm x-axis: 210 mm z-axis: 610 mm greates pass round over bed: 600 mm swing diameter over slide rest: 360 mm tailstock travel: 500 mm tailstock quill taper MT: 4 dimension of workpiece: dia 200 x 520 mm total power requirement: 20 kVA weight of the machine ca.: 4,5 t dimensions of the machine ca.: 3 x 1,9 x 1,9 m - CNC control Siemens Sinumerik 810D - 12-position turret (VDI 30), driven tools 4000 rpm - Main spindle - Tailstock (MK 4) - C-axis - Coolant device - suction unit - Chip conveyor Machine has mainly processed plastic The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
