cap mould used for sale

SPINDLE MOULDER type SCM T130 . second hand diam. spindle mm. 40 volt. 380/50

Engel injection moulding machine old

Qty. 1 Second-hand pulp moulding plant Maker: DongJin MP Tech Model no.: DPF 70-85 S2 Built: 2007 Dry type pulp moulding machine Quantity: 4 units Condition: can be inspected in dry running Three step way: heating /pressing/vacuum dry -Platen size: 700 x 850 mm -Dimensions: 1300(W) x 3200 (L) x 4000(H) mm

Onsrud twin table copy shaper ONSRUD-auto dual table rotary shaper, model RS-28, for continuous production, 2-speed cutter (5,000/10,000 rpm.) pivots alternately to the right or left table, as center clamp engages, the table rotates, the cutter pivots into your part and continues around template machining the part, the operator unloads and loads new part on alternate table, when cut is complete, operator presses the foot pedal, the cutter then pivots to alternate table &cuts, cycle continues.. $9,900 Contact Fred (716) 433 4224 (12:00 noon is best time to call)

ELWIK RT-C1 hot runner control system is a very important device for ensuring the right temperature during the injection process. The temperature controller for an injection moulding machine, having one heating zone with current load of 16 A, is used in cooperation with central nozzles, which enables the processing of all types of plastics. The temperature can be regulated from 0°C to 500°C. Thanks to the functions and protections used, the temperature cmould temperature controller guarantees continuous and uninterrupted operation, preventing, for example, complete burning out of the heater by drying it when the supply voltage is reduced. The extremely important auto-adaptation function automatically sets the P, PI, PID parameters without exceeding the set temperature, while the sequential control, especially important with a large number of nozzles installed in the mould, significa ...

ELWIK RT-C hot runner control system is a device for ensuring the right temperature during the injection process. The mould temperature controller, built in a panel system, adjusts temperature in the range from 0 to 500°C using a coding switch. The advanced technology and safety features included in the device guarantee uninterrupted and reliable operation of the mould temperature controller. The P, PI, PID parameters are set automatically by the temperature controller to the injection moulding machine, thanks to an auto-adaptation function that ensures that the pre-set temperature is not exceeded. The heater is dried when the supply voltage is reduced, completely protecting it from burning out. The mould temperature controller is equipped with six heating zones with a 16 A load per zone, making it possible to process any type of plastic. Technical specifications of the ELWIK RT-C ...

Type MX5117B Work table dimensions 1130x670 mm Spindle speed diameter 35 mm Spindle rotation speed 6000-8000-800-10000 rpm Max. working thickness 120 mm Motor power 4 kW Dust exhaust outlets 200x65, 200x80 mm Transport dimensions 1130x670x1100mm Weight 325 kg

WEINIG planer and moulder model Unimat 22 A Equipment: - Package - Lifting table (no pit required) - automatic stacking strip removal - Rubberized inclined conveyor - Rubberized separation - Longitudinal conveyor for planing.- Moulder - Unimat 22 A with soundproof cabin - 2nd operating unit - Manual acceptance Weinig Planer.- Automatic throat machine, technical data: Spindle arrangement: U - R - L - O - U Saw Working width: 220 mm Working height: 120 mm Motor power feed: 4 kW Motor power of the working spindles: 4 kW Speed of the working spindles: 6000 rpm. Diameter of the working spindles 40 mm Feed infinitely variable 6 - 32 m/min Diameter of feed rollers (hardened) 140 mm Space requirement line: 12.7 x 5.0 m Spelling mistakes and errors excepted

2 pcs. molds with 1-1 cavity, automat with hot runnel control, PP material molds sizes both: 300x245x213 mm machine size min. 25 T

1 cavity from PP material mold sizes: 383x450x384 mm machine size min. 100 T

Used injection molding tools for the manufacture of plastic slippers. Offer total 43 pcs. refers to two cavities tooling and accessories. From small children (23) to men (45) in size, it is suitable for the manufacture of slippers of various types and colors. For sale total 12,900 Euro

1 used Strec blower, manufacturer SIDEL, type SBO 14 SERIES 2, built 2004, Siemens S7-400, capacity at 2.0L 16000 Fl/h - at 0.5L 21500 Fl/h,, in principle with shapes 0.5 L + 2.0 L round petaloid, quickly adjustable by GUPM, max bottle size 2.5 L, furnace linear, heating modules 14, Formling mouth 28 / 1810, operating hours 72958, production hours 34191. Maintenance by sidel and own technicians. Condition: neat/good. With: Sidel Pre-form Hopper/Kipper, various to air transport manufacturer Rafael/Compere, some spare parts. No cooling unit, no high-pressure compressor. Last production June 2019. Immediately available.

1 used stretch blower, Manufacturer SIDEL, type SBO 14 SERIES 2, built 2001, Siemens S7-400, power at 0.5L 21500 Fl/h, basically with shapes 0.5 L square/round Champagne bottom, quickly adjustable by GUPM, max bottle size 2.5 L, furnace linear, heating modules 14, forming mouth 30/25. Maintenance by Sidel and own technicians. Condition: Oven chain not complete, but curve card removes new as spare part. With: Sidel Pre-form Hopper/Kipper, various to air transport manufacturer Ling Systems, some spare parts. No cooling unit, no high-pressure compressor. Last production March 2019. Immediately available.

Approx. 50 pieces of press moulds for round elements Dimensions: 1000 mm x 1200 mm

Table dimensions mm: 1000 x 900 With drive system

Planing width mm: 330 Planing height mm: 120 Inlet table length mm: 1800 Feed max m/min: 6-36 (inverter) Speed max: 6500 Number of spindles: 6 Spindle arrangement: 01 - Planing shaft - KW 15 01 - Spindles right - KW 15 01 - Spindles left - KW 15 01 - Spindles above - KW 15 01 - Spindles above KW 18 01 - Spindles below KW 15 Software: Control 100 PC Plus Spindle diameter mm: 50 Handling System Weight Kg: 5000

250 ml bottle form set with shampoo nut

According to the PDF prospectus!

Forms 9 pcs. for the production of Styrofoam Pins A package of professional injection moulds for the production of pins for polystyrene ( 9 pcs. molds from 12-36 sockets ) Name 1 St. 10 / h – 120 mm 12 Cold Channel 2 Wedks 10 / h – 160 mm 12 Cold Channel 3 St. 10 / h – 180 mm 12 Cold Channel 4 Squid 10 / h – 200 and 220 mm 12 Hot channel 5 Squid 10 / h – 240 and 260 mm 12 Hot channel 6 Wed.5 nails /70, 90,120, 140 mm 36 Cold Channel 7 Wed.5 nails /160,180, 200, 220 mm 36 Cold Channel 8 Wed.5 nails /160,180, 200, 220 mm 36 Cold Channel 9 Nail caps 36 Cold Channel

Oval openwork Laundry basket // 1860 kg; hot-runner-2 points; Pneumatic servo.; very good codition ; made by Italy dimension mould - 795/595/560 mm // dimension basket - 580/390/240 // weight - 410 g

Oval Bathtub // 1860 kg; hot-runner-2 points; very good condition ; made by Italy // dimension mould - 800/595/560 mm // dimension Bathtub - 595/395/210 // weight - 540 g

Ties for snowbord // weight - 580 g // 6 pcs. new moulds

Gas injection technology Bauer – 11 pcs. 2001 – 2007 year prod. Price - 1.500 Euro/pcs.

Box for cycle - 3 pcs. new moulds price 10.000 Euro

Detailed info: Aluminium format sliding carriage with hardened steel guide rods. Large solid work table made of grey cast iron. ø190 mm table opening with undercounter extraction. Electronic speed display. Milling stop ø250 mm. Built-in milling spindle lock. 4 speeds as standard. Milling spindle can be swiveled backwards. With integral stop 500 mm and telescopic stop 900 mm, extendable, with 2 stops and tensioners made in EU Technical data: 400V Spindle diameter 30 mm swiveling spindle 90°/45° Spindle height adjustment 175 mm Spindle clamping length 125 mm tool diameter 250 mm with optionally available tenon slot hood 320 mm Spindle speed 1400/3500/6000/8000 Weight 390 kg

Two-station machine for articles up to 5 ltr. Extruder 90/22D. Single head CoEx (virgin - regrind - virgin). Good condition. Still in production, free approx. June 2020. With waste conveyor below the machine

• Blow moulding machine SIPA mod. SF 8/4 – 4.000 bph: • Year: 1998 • Producer: SIPA • Speed (BPH): 4.000 bph • 4 cavities. • Format available: 0.5 lt - 1.5 lt - 2.0 lt. • Preform loader. • Preform tipper. • Complete with air recovery system. • Safety protections. • Code W 14

Table milling machine Comag Technical data • Speed (rPM): 2500/4500/6000 • Machine is in working condition

BOTTENE – PASMEC moulding line for beads and planks, composed as follows: Automatic loader PASMEC, year 2005 : - PLC for work cycle programming - arm with suction cup system and vacuum pump - 1600mm useful stroke, brushless motor and prismatic guides - side aligners + pneumatic introducer pusher BOTTENE TARGET 606 moulder with 6 shafts, year 2017: – useful working measures 230x150mm – gimbal towing and differentiated pneumatic pressure – variable feed speed 6 – 60 mt/min with inverter – feed motor KW 7,5 – HP 10 – top feed wheel before the 1st shaft – group of tandem feed wheels in front of the 2nd shaft – overlapping feed wheels (top + bottom in the plane): at machine entrance, before the 1st shaft between the 4th and 5th tree at machine output, after the 6th shaft – short 1200mm entry plane – lubrication pump – protection cabin � ...

With feed and vacuum pump

--------------------

Control CC 100 for ENGEL injection moulding machines

Machine type: Table milling machine Manufacturer: ELEKTRA BECKUM Model: TF 100 M 2.8 DN Built: 1998 Condition: ready for use Offer type: used machine Technical data: Table: 520 X 420 mm Speeds: 4000/6000/7500 rpm. Drive: 1.8 KW Comment: with an additional horizontal sawing unit (1.5 kW) for Two-sided machining with roller conveyor and lateral material guidance, everything can be easily dismantled Weight: 150 kg

Double station machine for articles up to 6 ltr. Extruder S 70/20D. Double head, 160 mm center distance. Closing force 120 kN. was running 4.000 hours only (lab-machine), very good condition

WEINIG planer/moulder Unimat 22A with 9 heads Year of construction: 1987 Serial number 222-896. The planer is in good working condition and has been partially overhauled, cleaned and subjected to careful technical controls. • The machine has been thoroughly cleaned and technically checked. • Some wear parts have been replaced. • A test run was carried out to ensure functionality. • The machine is bolted to a wooden structure and is ready for shipment. • The planer and moulder is equipped with all the tools and is sold as such. Further technical data of the machine: Maximum planing width: 220 mm Maximum planing height: 140 mm Diameter of the spindles: 40 mm Spindle speed: 6000 rpm Length of the inlet table: 2 m The machine has a total of 9 spindles with the following configuration: 1. Lower spindle / dressing spindle : 5.5 kW 2. Right spindle /  ...

TECHNICAL DATA: Working width mm: 230 Planing height mm: 120 Infeed table length mm: 3500 Number of spindles: 6 Spindle configuration: 1 B: 5,5 KW 2 R: 7,5 KW 3 L: 7,5 KW 4 T: 7,5 KW 5 B: 5,5 KW 6 T: 5,5 KW Spindle diameter mm: 40 Feedrate m/min: 6-36 Rotation speed max rpm: 6.000 Soundproofing cabin: Yes Feeding magazine Weinig - PHV - 2004

- Manufacturer: Bekum - Machine type: 506D - Stations/Stations: Double Station /doublestation - Clamping Force: 170 kN - Built: 2003-Retrofit in 2021 by UES - Location/ Location: UES warehouse / UES warehouse - Control type/ Control system: New B&R control by UES/ New B&R Control by UES - WBK / Parison control: 100 points /100 points WBK - Extruder | Extruder: Grooved barrel extruder S 100/24D - Hose head/ Parison head: On request / on request - Shape dimensions mm/ Mold dimensions mm (A length/length x W width/ width x C depth /depth): 550/500/2150 - Bottle volume Max./ Bottle volume max.: 15/ 20 lit. - Screen language / Monitor language: English/ German - Accessories/ Accessories: On request - Weight/Weight (kg): 12000 - Price /Price: On request / on request

- Manufacturer: Bekum - Machine type/ Machine type: BA 34.2 - Stations / Stations: Single Station/ Single Station - Built: 2001 - Location / Location Germany - Control type/ Control system: Original Bekum Beckhoff - Extruder | Extruder: 100/24D - Hose head / Parison head: AKZ4 (New by UES !) - Dimension dimensions mm /mold dimensions mm (A length/ length x W width/ width x C depth/ 700/700/2250 - Bottle volume Max./ Bottle volume max.: 30 lit - Screen language/ Monitor language: German/English - Delivery time | Delivery time: 30 days/ 30 days - Weight/Weight (kg): 13000

Manufacturer Bekum Machine type BM303D Station Double station Construction year 1989 Place Europe Closing force 50 kN Control Siemens Parison Control | WBK 30 Points WBK Extruder 70/20D Shape dimension in mm (Length x width x height) 400/300/ 2100 Parison Head 3BKSV30 Max bottle volume 3 lit Machine weight (kg) 6 t Monitour language German

Krosownice in good technical condition. Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the National Court Register, under KRS number No. 0000874432, NIP 6912552442, share capital: PLN 2,560,000.00 (paid in full).

ENGEL two shot (2k) 2300 ton injection molding machine -Model : DUO 23050H/11050M/2300 COMBI -Manufactured year : 2009

Gear wheel for mould height adjustment, die casting machine OL1200, Oleopress, new For the aluminium die-casting machine OL1200 from Oleopress, This gear drives the adjusting nut on the column. Special price -50% of the original price! If you have a VAT number, we will gladly issue an invoice without VAT. As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in operation, is completely as new and in the original packaging. This gear drives the adjusting nut on the column.

Facilities: - Aigner Integral Stop - Feed apparatus (3 rolls) - manual foot brake - Height adjustment by hand wheel - Aigner table extension

Press with press area 2200 x 1100 with built-in mould press

Weibert WJ-F40 Table milling machine Milling spindle 30mm 90° 4 speeds 1400/3500/6000/8000 rpm Table casting L= 1000mm W= 500mm 2.2 KW 400V Right+Left Run WJ-600300 + Options