cap line used for sale

Key data: 640 mm, 600 mm, 500 mm

Spindle speed: 12,000 min/1 Spindle hours: 21600h Control: Siemens Year of Make: 2004 3D Buttons Tool holder SK40 30 tool positions

CNC lathe GILDEMEISTER CTX 420 linear With control Heidenhain ELTROPILOT 4290 Year of Make: 2003 Max. rotatable diameter: 324 mm Max. rotatable length: 600 mm Max. circumferential diameter: 680 mm Spindle bore: 79 mm Max. spindle speed: 4500 rpm With the following accessories: Slide protection with interior lighting 12-speed revolver Various tool holders VDI 40 Tailstock with quill Chip conveyor Hydraulic jaw chuck SMW Autoblok 0 250 mm Foot switch for jaw chuck + tailstock adjustment Oil mist extraction Coolant Setup Operating Instructions

Key data: 640 mm, 640 mm, 640 mm

Vertical machining center Travel x/ y/ z = 640/640/640 mm Work table 850 x 600 mm Rapid traverse x/y/z 70/ 40/ 40 m/min Spindle speed up to 12,000 1/min Motor power 40/100 % 19/ 13 KW Torque 40/100 % 100/ 70 Nm Tool magazine 30-fold Tool holder SK 40 - Coolant system - Chip conveyors - Internal coolant supply - CNC control Heidenhain iTNC530

Key data: 500 mm, 1000 mm, 2500 1/min

Control: Name: Siemens 840 D Travels: x-travel: 382 mm // z-travel: 1080 mm Technical data: • Speed range 20-2500 rpm • Turning diameter 500/600 mm • Turning length 1000 mm • Spindle bore 136 mm • Rod diameter 121 mm • Torque 2200 Nm • Automatic hydraulic bezel • 12-fold tool turret

General SKU331Y747 LocationBarneveld CEcheck MakeDe Dietrich Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket30 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume100 Ltr. Motor0.75 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity100 l Vessel sizesDia. 700x500 mm Dished bottomcheck ManholeCover Top connectionscheck OutletDN80 with valve With jacketcheck Max. temperature-25°C/+200°C With propellor stirrercheck Motor0,75 kW (400 V, 1410 rpm, (Ex)) Speed mixing shaft185 rpm With jacketcheck Glass Reactors MaterialGlass - Enamel (3009) General TypeAE100 No.68438 Year of construction2007 Mounted on legscheck With switchgearcheck Floorspace0,90 x 0,90 m Total height2,60 m Weight550 kgFine chemicalsOther chemicalBiotechnologyGlass-lined ReactorsOther pharmaceuticsCosmeticsSolid pharmaceuticsBioph ...

General SKU331Y748 LocationBarneveld CEcheck MakeDe Dietrich Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket10 Bar Main Features MaterialGlass Volume400 Ltr. Motor1.5 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity400 l (444 l) Vessel sizesø 780 x 1000 mm Dished bottomcheck ManholeCover Top connectionscheck OutletDN 100 with valve With jacketvolume 120 l Max. temperature-25°C/ +170°C, jacket +200°C With propellor stirrercheck Motor1,5 kW (380 V, 1400 rpm (Ex)) Speed mixing shaft140 rpm With jacketcheck Glass Reactors MaterialGlass - Enamel (3009U) General TypeAE 400L No.67346 Year of construction2006 With switchgearcheck Floorspace1,00 x 1,00 m Total height2,30 m Weight1120 kg Extra information Mechanical seal fluid tank Fine chemicalsOther chemicalBiotechnologyGlass-lined ReactorsOther pharmaceutics ...

General SKU331Y749 LocationBarneveld MakeDe Dietrich TypeAE630IMF2 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket35 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume630 Ltr. Motor2.6 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity684 l Vessel sizesø 1200 x 900 mm Dished bottomcheck ManholeDN300 Top connectionscheck OutletDN100 with valve Max. temperature—25 / 160 °C With propellor stirrercheck Motor2,60 kW (400 V, 1800 rpm, (Ex)) Speed mixing shaft300 rpm With jacketcheck Glass Reactors MaterialGlass - Enamel (3009) General No.69871 Year of construction2009 With switchgearcheck Floorspace1,70 x 1,70 m Total height3,20 m Weight1800 Extra information With Bartec control, type Polaris,  Mechanical seal fluid tank,  Fine chemicalsOther chemicalBiotechnologyGlass-lined ReactorsOther pha ...

General SKU473Y429 MakeHosokawa Micron B.V. Serial4606801/0200 TypeMicron Dryer MDV-5 (flash dryer / mill) + screw feeder DHA-200 Material Product contact materialStainless steel Cover materialStainless steel Rotor materialMild steel Extra information Temperature140 °C Weight5500 kilogram Rotor speed400 rpm Specified Features - Miscellaneous Mill Grindergrinding rotor with classifier in one body Motor55 kW Speed400 rpm Miscellaneous Mills MaterialMild steel, Stainless steel General Year of construction1995 Mounted on framecheck LocationBarneveld Weight5500 kg Extra information This Hosokawa Micron MDV-5 flash dryer combines drying, grinding and classifying in a single body: a vertically driven grinding rotor with an integrated classifier, housed in a dryer body with a wet material feeder inlet, a hot air/gas inlet and a product/air outlet at the top. StarchAgro ...

Used bottling line for packaging oil / olive oil made by Robak. New 2018. The line is currently configured for 250-ml and 500-ml Marasca glass bottles. The filling and capping machines are set up for these capacities. The manufacturer also offers the option to fill round and plastic bottles of various capacities with this setup. It has primarily operated with 500 ml bottles, resulting in a production rate of: 1,000–1,200 bottles per hour. Total number of bottles produced: approximately 486,000. The line began operation in 2020. The line consists of the following components: 1. ANM-08 automatic bottle filler - 10 filling heads with Coriolis mass flow meters - Capacity: up to 1,500 bottles/hour 2. ZR-02 single-head automatic capping machine and MPZ-01 mechanical cap feeder - Capping machine equipped with a head for 31.5x24 aluminum caps - Capping machine capacity: u ...

COLLIN Teach-Line CSG 171 T Strand Granulator For sale is a used COLLIN Teach-Line CSG 171 T strand granulator. The compact tabletop machine is used to produce granules from round plastic or polymer strands. The previously extruded and cooled strands are fed via a pair of feed rollers and then granulated by a fixed counter knife and a rotating impact knife. The feeding and cutting process can be easily observed through the transparent protective cover. The cutting gap between the rotor blade and the counter blade is precisely adjustable. The desired speed can be regulated on the control panel. Technical data: Manufacturer: Dr. Collin GmbH Model: Teach-Line CSG 171 T Year of Make: 2009 Machine number: 9310 31 09 Connected load: 0.5 kW Electrical connection: 230 V / 50 Hz Nominal current according to nameplate: 6 A Dimensions: approx. 290 x 500 x 540 mm Weight: approx. ...

Key data: 2200 mm, 1500 mm, 1000 mm

Description, subject to prior sale. CNC 5-axis gantry milling machine with high dynamics Manufacturer: Parpas Type: Diamond linear Year of manufacture: 2013, Acceptance: 2014 Control: Heidenhain iTNC530 X (longitudinal travel): 2200 mm (+330) Y (transverse travel): 1500 mm (+330) Z (vertical travel): 1000 mm Distance between uprights: 2700 mm Max. distance between table surface and spindle tip with mounted milling head 1220 mm Linear axis feed speed: X and Y axis 0-60 m/min Z-axis 0-40 m/min Table surface: 2300 x 1600 mm Max. weight with optimal distribution: 6000 Kg/m2 T-slots 22 mm, distance between T-slots 200 mm. 5-axis orthogonal milling head with electrospindle Max. spindle speed 20,000 min-1 Spindle cone HSK 63 A A-axis ±105° (torque 830 Nm), C-axis ± 370° (torque 1200 Nm) 42 Stations Tool Changer Tool holder HSK 63A-100 Max. tool∅ 80mm  ...

What's included: Infeed and shredding • Genox CBS13080 metal infeed conveyor – heavy steel-slat belt for feeding bales or loose film into the pre-shredder • Genox YS1300 pre-shredder – single-shaft, hydraulic ram fed, 75 kW main drive. Opens bales and cuts film down before washing • Genox CBR6090L conveyor belt – 4 kW twin-angle belt conveyor Pre-washing • Genox GRD6025 pre-washer – 45 kW / 60 HP, 415 V / 50 Hz, built 2018, serial S19UL04, CE marked. Strips sand, grit and soil from the film before it reaches the granulators Size reduction • Genox GXC1200N film granulator – GXC1200 series heavy-duty granulator, 1,200 mm wide × 520 mm diameter rotor, outboard bearings, hydraulic-assisted chamber and screen opening • Genox V800 single-shaft shredder/granulator – 400 mm × 800 mm rotor, 35 reversible 40 mm cutters, hydraulic ram feed, 40 mm screen, app ...

Slitting amp; cut to length line 1 - Double head decoiler (hydr): gt; 20 ton capacity gt; with coil supply cart amp; lift min coil width: 500 mm both units are movable 2 - Pulling unit 3 - Shear for making the first clean cut 4 - Pre-leveller Ungerer 4 + 5 rolls hydraulically adjustable 5 - Slitting unit with 4 cuts 6 - Supply system for shear 7 - Shear for cut to length 8 - Conveyor table 9 - Broncx fine leveller 10 - Stacking unit gt; featured a mechanical back gauge; once plate make contact then the shear makes the cut max length of cut: 7 meters Total length of the installed line: 50 meters Material thickness x width: 2200 x 4 mm DECOILER(s): 20 ton

measuring range X-axis: 0 - 200 mm measuring range Z-axis: 0 - 300 mm tool adaptor: SK 40 / BT 40 Resolution: 0,01 mm repeating accuracy: 0,01 mm Ambinent temperature: 0 - 40 °C dimensions of the machine ca.: 0,30 x 0,19 x 0,64 m weight: 44 kg Tool Presetter KELCH - set line V123 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

rollforming line for simple angle profile Equipment consists of: 1 gt; decoiler 2 gt; roll forming line with 6 stands 3 gt; cutting unit

3-axle refrigerated semi-trailer Make: KRONE, Type: SD COOL LINER SDR27 EL4-DS, Year of manufacture: 2022, Serial number: WKESD000001055194, Registration number: 10/2022, Vehicle identification number: WKESD000001055194, permissible Total weight 39,000 kg, Double deck version, Clear interior length 13,310 mm, Clear interior width 2,460 mm, Clear interior height 2,630 mm, Refrigeration system CARRIER VECTOR 1550

3-axle refrigerated semi-trailer Make: KRONE, Type: SD COOL LINER SDR27 EL4-DS, Year of manufacture: 2022, Serial number: WKESD000001055193, Registration: 11/2022, Vehicle identification number: WKESD000001055193, permissible Total weight 39,000 kg, Double deck version, Clear interior length 13,310 mm, Clear interior width 2,460 mm, Clear interior height 2,630 mm, Refrigeration system CARRIER VECTOR 1550

3D -Venjakob Perfect Air Jet painting line: - Manufacturer: Venjakob - Year of construction: 2013 - Working width: 1.300mm - Max. part length 6.500mm - In U -shape with angle transfer Consisting of: 1. loading belt, length 3,050mm 2. free space für Sanding machine (only optional, not included in the price) 3. spraying machine VEN SPRAY PERFECT, length 5.510mm 4. flash -off dryer OIR, length 6,000mm 5. nozzle dryer VEN DRY AIR JET, length 4,160mm 6. angle transfer 180 degrees, with nozzle dryer 7. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 8. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 9. nozzle dryer VEN DRY AIR JET, length 5.160mm 4 pcs, IR tubes 10. 3D UV dryer, VEN DRY UV, GA + HG 11. removal area, belt of the UV dryer Further information: On request

Availability: Immediately Control unit: Siemens Sinumerik 840D Dimensions: L 10000 x W 2450 x H 3000 mm Motor power: 35 kW Number of axes: 4 axes Spindle speed: 6300 rpm Spindle taper: ISO 40 Table length: 2600 mm Table load: 2200 kg Table width: 600 mm Tool magazine: 100 positions Weight: 14000 kg Working hours: 8451 H X-Axis travel: 2200 mm Y-Axis travel: 540 mm Z-Axis travel: 720 mm We hereby offer this used Deckel Maho DMF 220 Linear vertical machining center from 2005, located in Romania. This high-performance vertical machining center is equipped with a Siemens Sinumerik 840D control unit, offering advanced programming and precise control for complex machining operations. It features a large working area of 2600 x 600 mm, providing flexibility for machining long and medium-sized components. Powered by a robust 35 kW motor and a spindle capable of reaching 6300 rpm, the DMF 220 Lin ...

Hardcover Line Zechini / Sumbel / Schmedt Type: semi-automatic hardcover line Equipped with: Sumbel Herold Zechini Ottima 74 roller press Schmedt Präkant 6201 turning-in machine Zechini Ottima 74 – Roller Press Year: 2000 Size: 74 cm Application: pressing together paper, cardboard, material, leather, plastic, corrugated carton, etc. Max. material thickness: 3,5 mm Dimensions: 96 x 85 x 105 (h) cm Net weight: 119 kg Schmedt Präkant 6201 – Turning-in Machine Max. size: 600 x 600 mm Min. size: 150 x 150 mm Board thickness: max. 6 mm, min. 1,5 mm Condition: good, cleaned and checked

General SKU304W587 MakeTechnoglass LocationBarneveld TypeAE160 Pressure Working pressure6 Bar Working pressure jacket9 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume160 Ltr. Motor1.5 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity216 l, (160 l) Vessel sizesDia. 800x600 mm ManholeDN 700 Top connectionscheck Outlet(top discharge by vacuum/ pressure) With jacketcheck Max. temperature200°C With propellor stirrercheck Motor1,5 kW, (400 V, 1460 rpm (Ex)) Speed mixing shaft36 - 178 rpm With jacketcheck Glass Reactors MaterialGlass General No.8289 Year of construction1999 Mounted on legscheck Floorspace0,80 x 0,80 m Total height2,60 m Weight650 kg ATEX designedcheck Extra information - No bottom outlet for product. Product has to be discharged by vacuum or pressure - baffle with temperature probe installed Volume 63 l,  ...

turning diameter:640 / 400 mm turning length:1500 mm control:Siemens 840 D Powerline Travel turret No.1 (milling spindle) x/y/z:550 / 180 (±90) / 1585 mm Swivle angle milling spindle (B-axis):±120° interpol. ° Rapid traverse feeds turret 1 (milling head) x/y/z:40/24/60 m/min RPM milling spindle:12000 1/min power capacity - milling spindle:12 / 23 kW Torque of milling spindle:100 Nm Tool magazine for milling spindle (turret 1):120 HSK-A 63 Tool change time tool/tool, milling spindle:1,6 s Spindle 1 RPM:4000 1/min Spindle 1 power:36/ 45 kW Spindle 1 Torque:730 Nm Spindle 1 max. bar diameter:90 Spindle 2 RPM:4000 1/min Spindle 2 power:36 / 45 kW Spindle 2 torque:730 Nm Spindle 2 max. bar diameter:90 c-axis:0,001 ° Travel turret 2 x:225 mm Travel Turret 2 z:1595 mm RPM of rotary tools turret 2:4000 1/min no. of tools in turret 2:12 VDI 40 high-pressure pump:20 bar total power requiremen ...

GeneralHorizontal Machining Centre in travelling column construction; Control: 3D Control Siemens 840D solutionline operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/70000 mm/minRapid traverse longitudinal/transverse/vertical60/60/70 m/minWorking area 1Longitudinal630 mmCross800 mmVertical850 mmPackage recirculation ballscrew spindlePackage recirculating ballscrew spindle X-,Z-axis:max. feed speed: 60.000 mm/min Y-axis: max. feed speed: 70.000 mm/min (basic machine without linear drive X-, Y-, Z-axis) Main driveDrive power (100% DC) 20 kWDrive power (40% DC) 20 kWSpeed range -12000 rpmSpindle taper HSK-A 63 CabineFull protection cabin Direct measuring systemDirect path measuring system NC rotary table with pallet changerTable surface 500 x 500 mmCentre bore 50 mmMaximum load (table centre) 600 KgSlot width 14 mmNumber of Slots 5 Distance between T-Slots 100 mmRo ...

pressure:600 t distance between columns:3640 mm stroke:350 mm no. of strokes:11 - 44 /min Distance table/ram, max. stroke up, adjustment up:1550 mm table surface area:3600 x 2500 mm sliding table:3600 x 2500 mm ram surface:3600 x 2500 mm Side window:2200 mm ram adjustment:400 mm material width coil line:500 - 1950 mm Material thickness at 1200 mm material width:0,6 - 2,5 mm Material thickness at 1850 mm material width:0,6 - 2,0 mm Material thickness at 1950 mm material width:0,6 - 1,75 mm Coil weight:35,0 t coil internal diameter:610 mm coil external diameter:900 - 1900 mm no. of straightening rolls:13 straightening roll diameter:50 mm Stack height:400 mm stacking dimensions - station 1+2 (L x W):150-2000 x 250-2000 mm stations:2 power requirement:112,0 + 35,0 kW Weight:390,0 t Dimensions (WxDxH):7,3 x 5,1 x 15,0 m Height above floor:9,1 m Height below floor:5,9 m clutch-/ brake combinat ...

Major maintenance had 05/09/2025 brake discs and pads around wheel bearings replaced at the rear fluid leak fixed Clutch defective / not drivable Start Auction-ID: A3-46097-19201

Cat.-Nr. 11-1045 Capacity: 500 up to 1000 Litres COMPLETE For producing juice and filling in from fruits and vegetables For Washing/Grinding, Pressing, Storing, Pasteurizing, Filling Complete Production Line with following machines: Cat-Nr 10-2346 - Eurolux Big-Box Dumper for emptying fruits and vegetables from wood or OVC boxes LxWxH: 1680 x 1480 x 1220 mm Cat-Nr 10-2347 – Eurolux Wash and Grinding Mill Unit Capacity: 2000 kg/h - Motor Power: 3,0 kW Cat-Nr 10-2337 – Eurolux Automatic Continuous Belt Press EL-500 for producing fruit juice and fruit wine, cider from apples, pears Capacity: 500 up to 1000 kg/h Cat-Nr 06-1101 – Eurolux Floating Lid Tanks 2 x 1000 Litres Floating Lid Tanks 2 x 500 Litres Floating Lid Tanks 2 x 300 Litres Floating Lid Tanks Cat-Nr 10-2350 – Eurolux Pasteurizing Machine EL-1500 with Plate Heat Exchanger Capacity: 10 ...

SACMI rotary compression line for plastic caps 38 mm. with control video system.

Used packaging line for capsules into jars made by Pharma Packaging Systems/Robak company PPS capsule counter - 2 pcs Manufacture year: 2015 Production country: England Max capacity: up to 14 op / min capsules of 000 in the amount of 300 pcs up to 80 op / min smaller quantities Counting range: 10 - 300 items Possible packaging: cylindrical jars 150mm in diameter and up to 210mm in height Labeling: self-adhesive wrapping labels Codification: InkJet on the bottom of the packaging Required media: en. electric, compressed air

PET filling line Krones capacity: 16.000 bph by 1.500 ml product: still and carbonated water bottle sizes: 500 ml / 1.000 ml / 1.500 ml label: 3 labels and wrap around label OPP packaging: 3 x 2 year of manufacturing: 2012 consisting of: Blowing machine Krones Contiform 8 including preform feeding Filling and capping bloc Krones Modulfill CIP system Varioclean AUT-5000L Inspection machine Krones Checkmat 731FM-X Bottle dryer Linardry S1M Labelling machine Krones Topmatic to label 3 labels and wrap around label OPP Packer Variopac to pack 3 x 2 = 6 pack Handle applicator Palletizer Modulpal for pallets 800 x 1.200 mm and 1.000 x 1.200 mm Stretch wrapping machine Robopack Sleeve labelling machine Krones Bottle conveyors, cap conveyor, pallet conveyors

Sidel PET filling ling products: drinks with Co², beer capacity: 12.000 bph per 1,5 ltr. It is possible to turn on individual machines of the line in a dry state. bottle formats: 500 ml 700 ml, 1.500 ml all neck bottle formats: PCO 28 - 1810 1. Blow molding machine Sidel SBO 10 year of manufacturing: 1999 2. Cooler for SBO 10 year of manufacturing: 1998 3. Preform hopper Sameto Technifil Year of manufacturing: 1999 4. Preform conveyor Sidel year of manufacturing: 1998 5. Compressor SIAD year of manufacturing: 1999 and cooling for the compressor 6. Air conveyor RAFALE year of manufacturing: 12/1998 7. Mixer 240 C, Moravek 'CFT year of manufacturing: 2000 8. Tribloc Alsim PET r.v. for 60 filling taps year of manufacturing: 2000 9. Labelling machine Krones Contiroll year of manufacturing: 2004 10. Slat conveyors year ...

Filling line for cans fixed for 330 and 500 ml cans capacity: 6,000 cans/hour for 330 ml cans packaging: 3x4 or 4x6 cans on tray shrinked into foil consisting of: 1. TMG Impianti depalletizer 2. Comac carbonator, year of manufacture: 2007 3. MCD filling and seaming combination, type: 16/4 also manufactured by Comac, year of manufacture: 2007 4. Comac tunnel pasteurizer, year of manufacture: 2007 5. Dimac Star One tray erector, tray packer, and foil wrapping machine The filling line is currently fully assembled and in excellent condition. It is being sold with the associated control equipment and conveyor belts. It can be inspected on request.

Can filler and seamer Markl / Bonicom Filler: Markl Bavaria 16L with 16 filling valves Seamer: Bonicom F 120 with 2 seaming heads Capacity: approx. 5.000 cph Can size: 330 ml and 500 ml standard cans Can type: 211 / 202 good condition

A fully automatic high-vacuum rotary filling and capping machine Alwid for spirits is available. Filling stations: 48, filling valve diameter: 14mm, capper type: Alwid Favorit-PP, capping heads: 10, closure types: PP28/PP28x44/PP31.5 deep, min. working height: 1150mm, bottle volume: 0.7l, bottle types: rectangular glass bottles/vodka bottles/long-neck bottles, filling capacity according to documentation: 18000bph, effective filling capacity: approx. 12000bph, weight: approx. 6500kg, operating hours: approx. 14000h. Without sorting unit and chutes. The vacuum pump probably needs descaling. The deviation between the documented and actual filling capacity per hour is due to foam formation during the filling process, which significantly reduces performance. Documentation available. An on-site inspection is possible.

Complete line for carbonated soft drinks and carbonated mineral water capacity: 5.300 bph by 500 ml PET bottles neck size: PCO1881 working hours: approx. 28,000 hrs. consisting of: 1. Kosme KSB 4R PET stretch blow moulding machine year of manufacturing 2018 includes: preform hopper/elevator, preform unscrambler and ATS mould chiller. 2. Air conveyor 3. Caronation Techniques E0526 mixer year of manufacturing 2016 4. Filler Kosme Barifill with 16 filling heads year of manufacturing: 2017 with AVE capper year of manufacturing 1999 5. Heuft Basic inspection unit 6. Kosme labeller year of manufacturing 2018 7. Conveyors (mixed) 8. SMI LSK 30T shrink packer and tunnel packing format: 3x2 year of manufacturing 2005 9. Videojet 1530 date coder 10. Logopak case labeller year of manufacturing 2012 11. Robopac Roto ...

Used KHS bottle filling line with crown capper - overhauled by HORMES - Filling rotary - Bottle cap bunker - Feeding of the crown caps by magnetic tapes - Conveyor belts The plant has been completely overhauled by HORMES and is currently out of operation. Viewing possible. We will be happy to send you further information on request.

Used line for packaging tablets and capsules in PET packaging Line composition: 1. DT PACKAGING SYSTEM UNSCRAMBLER1000S rotary sorter 2. DT PACKAGING SYSTEM CONVEYOR CONTROL conveyor for counters 3. DT PACKAGING SYSTEM CONVEYOR CONTROL conveyor for counters 4. B8P/3DUPLEX counter 5. B8P/3DUPLEX counter 6. Elevator 7. ML657 cap setter 8. Desiccant hopper 9. Cap hopper 10. PACK SERVICE PREALIMENTATORE lid elevator 11. PACK SERVICE TAVOLO ROTANTE PS160 buffer sorting wheel 12. PACK SERVICE TAVOLO ROTANTE PS160 buffer sorting wheel 13. Neri labeler SL200 14. Marchesini MA155 cartoning machine 15. Type C Transporter

2019 GAI 1730S-HV-4292 TOP — Fully Automatic Filling, Capping & Labelling Line Complete, fully automatic bottle filling and labelling line by GAI (Italy), year of manufacture 2019. Designed for viscous liquids such as oils, syrups, sauces, and similar products. Stainless steel construction throughout. CE-certified with full safety guarding. The line consists of two main units: 1. Filling & Capping Monoblock — GAI 1730S-HV-4292 TOP 10-station high-performance vacuum filler specifically engineered for viscous fluids. Patented fill valve design seals both the product tube and gas tube during filling, preventing any air contact with the tank contents. Fill level is centrally regulated and manually adjustable from 30 to 90 mm below the bottle neck. Centering cones on each fill valve ensure precise bottle alignment. Central bottom-feed product supply allows complete and natural tank dr ...

GEA Sour Cream Thermization Line, Capacity: 1,500–2,000 l/h, Year: 2013, Installed & Connected – Excellent Overall Condition, Complete GEA Process Line, We are offering a complete GEA Sour Cream Thermization Line originally designed for the, thermal treatment of sour cream and fermented cream products., The line was installed in 2013 and remains installed and connected on site. It is available for, inspection and can be offered complete with associated process equipment, automation,, and technical documentation., The system was supplied as a complete GEA process line and includes a buffer tank,, thermization skid, hot water circuit, CIP dosing system, pumps, valves, instrumentation, and, fully automated process control., Main Application, Originally designed for:, • Sour Cream, • Fermented Cream (25% fat), Potential Applications, • Kefir, • Cultured Buttermilk, • Drinkin ...

A combined rotary bottle filling and capping machine MAG Schymanski (filling monoblock) with capping heads renewed in 2023 is available. Capper manufacturer: Arol, capper type: Euro VA, filling system: rotary filler, filling valves: 28, capping heads: 4, filling capacity range: 3500bottles/h-6000bottles/h. Documentation available. An on-site inspection is possible.

consisting of:  - Depalletiser, KETTNER, year 2000, 15000 bph, - Rinser with air, Alwid, year 1999, 7500 bph, - Filler with capper, Fimer/Arol, year 2006, 8000 bottles/hour - Labeller, Krones Variomatic, year 2001, 8000 bottles/hour - Carton erector, KETTNER, year 2001, 20 cartons/min. - Packer, KETTNER, year 2001, 7000 bottles/hour Details: - Control Siemens S7 - different format sets available, - for glass bottles from 0,35L to 1,0L with ROPP cap of 30mm and 31,5mm - annual maintenance by Krones technicians - very good condition

Used OLMOS compact eco2 linear capper labeller - glass and PET Technical Specifications & Performance DataOlmos COMPACT 800 2 is an in-line labeling and capping machine designed for bottle handling in industrial packaging and beverage production environments. Its double-position inlet configuration supports continuous integration within a bottling line, combining labeling and capping operations in one machine.Manufacturer: OlmosModel: COMPACT 800 2Manufacturing year: 2012Bottle formats: compatible with 0.5L to 5.0L bottlesContainer materials: PET and GlassFunctions: in-line labeling and cappingMains voltage: 380V ACAdvanced Automation & Control SystemsThe machine is configured for in-line operation, allowing the labeling and capping stages to be incorporated into a coordinated bottle-handling process. The double-position inlet is intended to support controlled bottle entry and reliable t ...

Complete line for twist off caps manufacturing. Air compressor included. Press, scissors, oven, PVC stabilizer, front and side vew cap forming machines

BOTTLES & JARS!

Ladies and gentlemen, we offer: Biomass Container Heating incl. storage container with hydr. Shear floor discharge Plant complete with saemt installations Heating capacity 450 kW reachable by conversions now 480 kW Hot water production Fuel: coarse, moist spaene, wood chips up to 40% HF Best measurement results: Dust content 0.04 g/m3 at exhaust temperature of 170 degrees C For more information and pictures we are available. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any w ...

Stainless steel pumps, Hilge, Fristam, various versions and sizes

Stainless steel pumps, Hilge, Fristam, various versions and sizes, various models, partly new

Optimization cap seed PAUL, type 12 KE Automatic cademaege for saeging pre-programmed fixtures and fault caps after kreid marking Very little going on Top Condition

Cat.-Nr. 10-1460 in a very good condition Tecnical Details: Production Capacity: 40 boxes/minute Year of Construction: 2008 6 Cups/Tray = 240 Cups/Minute = 14.400 Cups/h each Cup 125 g Measurements: Packing Sizes – LxWxH: 698,5x168,0x1,5 mm Lid – LxDxH: 95,5x95,5x9,0 mm Cup – DxH: 92,5x42,0 mm Machine Measurements: LxWxH: 7500x7400x3000 mm Weight: approx. 6800 kg Operating Instructions available Original Price: Euro 655.000,00 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.