can used for sale

Key data: 500

Automatic under-table crosscut saw The complete unit consists of the automatic under-cutting saw (UKS 600 HA), a feed line with a new automatic positioning insert (TigerStop TS 6.0 L / 2019) and a run-off runway. 1. Automatic under-cutting saw UKS 600 HA - Working height: 800 mm - Diameter connection socket for suction chip catcher (machine): 120 mm - Diameter connection socket for suction contact hood: 120 mm - Suction speed: 20 m/sec - Suction capacity: 2000 m3/h - Diameter saw blade: 500 mm - Diameter saw blade bore: 80 mm - Saw blade overstand at 500 mm saw blade: 160 mm - Cutting speed at 500 mm saw blade: 78 m/sec - Short stroke for small wood cross-sections up to 240 x 120 mm (up to 36 strokes/min) - Long stroke for larger cutting widths up to 600 x 120 mm (up to 18 strokes/min) - Automatic protective hood and holding device - Cut triggering via two-hand control ...

Extinguishing water tank Extinguishing water tank 100,000 litres steel tank, earth tank can be used as extinguishing water retaining tanks, Sports field irrigation, rain retention tanks, cisterns, etc. Factory new Dimensions: D = 2.90 m - L = approx. 16.00 m On request, the container can be fully equipped with a fire-fighting water suction connection: Extinguishing water suction connection / suction line made of stainless steel V2A - according to DIN 14230 - consisting of: For use as a fire-fighting water tank, we can use the tank fully equipped with a fire brigade suction connection, consisting of: - 1 pc. suction line DN125 made of stainless steel - V2A, with Storz A-fixed coupling and Storz A-blind coupling, - 1 pc. vent pipe DN100 with stainless steel hood - V2A, - 1 pc. anti-vortex plate mounted on suction line, - 1 pc. sign "Extinguishing water colle ...

Waste separation plant - unpacking plant Food Waste Disposal plant / separation and separation plant for food & industrial waste. The innovative wet-separation plant for the treatment and separation of mixed, packaged and unpackaged waste. This plant is a solution for the settlement of the TA municipal waste of the Waste Disposal Ordinance, which prohibits the disposal/landfilling of untreated, organic, biodegradable municipal waste since 1 June 2005. By processing and separating organic and/or municipal waste, we reduce the pollution and provide a larger volume of high-quality biomass for recycling. If waste has previously been landed untreated, such waste is processed and recycled. The organic components are returned as compost or biomass for the production of renewable energies, which leads to a significant reduction in landfilling and thus the associated methane emission.  ...

For sale we offer a measuring and weighing system for packages from Bedal. It is a perfect system for all package acceptance or shipping. It can be used for example.B: In shipping at industry, wholesale or e-commerce, fulfillment service providers (e..B. forwarding agents, logistics), or at parcel reception points (e.B. courier services). Package dimensions: Min. BxWxH 10x10x4 cm Max. BxWxH 43x41x48 cm undressed max: LxWxH 75x41x48 cm Tolerance: LxWxH 1.0 x0.5 x 0.5cm Weight: 0.25kg: 0.05Kg (50g) / 25-32kg : 0.075kg (75g) Parcel Kiosk is an economical solution for weighing and dimensioning packages. It is certified by the international organization OIML. Automating packet measurement improves efficiency and saves resources. Thanks to the Parcel Kiosk system, you can be sure that accurate weight and dimensions are read and that your company is protected from errors an ...

Used cutting machine Hundegger K2 -5 machining width 625mm Manufacturer: Hundegger, DE Type: K2 - 5, 625mm Built: 2006 Condition: used, in operation, very good Consisting of: 1. Fully automatic wood conveying with feed roller conveyor and feed and feeding cross conveyor Consisting of a roller conveyor with cross-over from the cross conveyor with 5 strands equipped with hinge tape chains, which ensure injury-free transport Length: 9.2 m, Width: 2.2 m 2. Lower table swivel crosscut saw with 4-axis control With a carbide saw blade of 900 mm (11.0 KW) max. saw cutting depth: 300mm at 90° infinitely adjustable machining stroke with positioning drive pivotable 0- 360°, inclination 0-65°, drive servo-hydraulic, With this aggregate, all saw cuts, such as angles and shitging sections, longitudinal sections for burring and lruning, hewing or stash sections) are executed ...

GeneralVertical Machining Centres; Control: Control F0iMF CharacteristicsTable surface1400 x 560 mmMovement X / Y / Z1100/560/510 mmSpindle taperBT 40 Tool Magazine with60 PositionsDrive power (25% DC)15 kWDrive power (100% DC)11 kWSpeed max.12000 rpmMaximum load (table centre)1000 KgRapid feed X / Y / Z36/36/30 m/minDimensions (L x W x H)3,19 x 2,76 x 2,94 (3,82 x 3,58 x 3,01) mWeight approx.5500 KgStandard spindle 12,000 min-1, 15/ 11 kWStandard Spindle 12,000 min-1, 15/ 11 kW Spindle speed: 12,000 min-1 Output: 15/13/11 kW (20/17.33/15 HP) (25%ED/30min/cont) Torque: 119/70/57 Nm (87.76/51.62/42.04 ft·lbf) (25%ED/30min/cont)Spindle Taper 7/24 Taper #40/ Grip MAS Spindle Taper 7/24 Taper #40/ Grip MAS This specification uses the spindle No. 40 7/24 taper / Grip MAS tool holder. The grip type and retention knob type of ATC are specified separately.Retention Knob: Special (Center-Throug ...

pressure: 28 t stroke: 180 mm table-size: 300 x 550 mm total power requirement: 4 kW weight of the machine ca.: 0,650 t diameter of piston: 180 mm working feed: 2 mm/sec return speed: 20 mm/sec pressure capacity max.: 200 bar toolpiece height min.: 200 mm dimensions of the machine ca.: 1150 x 750 x 1103 mm This horizontal straightening press is designed for a wide variety of bending, profiling and straightening operations. ? ?The application of this Profi Press horizontal bending / straightening press varies depending on the accessories that can be installed on the worktable, on the tool mount and in the punch- and pin holes. This Profi Press model, the HB-28, is equipped with an angular graduation on the worktable for easy bend measurements and this horizontal press can be delivered with several tools (for example block punches) that can be mounted on the tool mount and tools that can b ...

IRB6600 Serie's upper arm extenders and different wrist modules will allow customization to each process. As the robot can bend fully backwards, the working range is greatly extended and the robot fits well into dense production lines. The IRB 6600 is ideal for process applications, regardless of industry. Typical areas can be Spot Welding, Material Handling and machine tending. Year: 2006 (Same Year, Orange Colour Available) Cabinet: NOT Included (Works with IRC5 - we can try to find one for you) Teach Pendant: NOT included but we can try to find one for you Signalling & Power Cables: NOT Included but we can try to find them for you Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman. (Source: ABB's Website)

We offer you here a used box shelf for sale. The shelf is ideal for lighter boxes, but cardboard boxes can also be easily picked up. The box shelf can be individually adjusted to your own needs. Both the angle of inclination of the roll strips and the distance between planes can be quickly and easily adjusted with an Allen. The levels are provided with guide rails on both sides and a stop on one side, so that the boxes/cardboard boxes are secured against accidental falling. Technical data and further information: Manufacturer: Beewatec Designation: Cardboardrack 1 lanes 19032-01 Year of construction: approx. 2015 Notes: As can be seen in the pictures, the shelf is delivered in a pre-assembled state. Included in delivery are: 01x Box shelf, used Total length: approx. 2,500 mm Total depth: approx. 610 mm Total height: approx. 1,915 mm Internal depth: approx.  ...

Hassia Redatron G2 PE flat foil bag filling for soil, peat, mulch, etc., used, good condition, in operation until 10/2021 + Belt feeder (drain-saturated, time-controlled), with chains and dosing plate for soil and peat (and topsoil) + PE flat film bagging Hassia Redatron G2 (incl. shaped shoulder) + Trigger tape Bag formats: + Common sizes for earth and peat possible + Roll sizes for 8L to 80L possible (we can establish contacts with film producers) + punched carrying handle possible + Side fold possible + Moulded shoulder available (we check) or can be retrofitted individually at any time Documentation available. Space requirement approx. 4.0 x 4.0 m, height approx. 6.5 m. The current location of the plant (dismantled) is Visbek, Germany. A riser conveyor should be added as a feeder for the belt feeder. In addition, one could consider adding a short piece of v ...

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 100 mm - B-axis ±110° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 5 bar; 20l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor - USB interface, Ethernet interface; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length750 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmC-Axis Speed-5000 rp ...

1 of used single-infusion brewery, make DME, capacity 32 HL / 20 BBL. RECENTLY Decommissioned – EXCELLENT condition! Brewhouse Single infusion temperature Mash Vessel with Grist Hydrator, Gas fired kettle and separate whirlpool vessel suitable for whole hops and pellets Grain Handling Floor mounted Grist case with flexible grain elevator leading to Grist hydrator Hot Liquor tank 10,000 litre vertical cylindrical vessel with stainless steel shell, shallow cone top and base. 2 x 18kW electric heating element, temperature pocket. 1.5 inch Tri Clamp outlet, Round Top Manway, all in T304. Free standing on stainless steel legs and feet . Insulated on the shell, clad in fully welded stainless steel 2.160,00 mm Diameter x 4.290,00 mm high Cold liquor tank Size and specification as per the above HLT but with a suitably sized external chilling panels Liquor Blending System Te ...

Water tanks & extinguishing water tanks USED & RECONDITIONED Muensterlandtanks.de Container and tank trading Call us: 0162 1341979 A used steel tank in the size of 100,000 litres is offered. Volume: 100.000 Ltr. Material: Steel tank tank, material S235JRG2 Tank shape: cylindrical, horizontal, double-walled Diameter 2.90 m, length approx. 15.50 m Exits: Dom on the top Departures top Tank according to DIN 6608 Tanks can be driven over and withstand the earth pressure - plastic tanks are compressed over time! Condition: Tank cleaned from the inside and provided with a new bitumen coating from the outside. Suitable for above-ground and underground storage of water, process water, rainwater, feed etc. Location Ascheberg. Transport can be arranged cost-effectively. The loading of the container on trucks or trailers is free of charge! For use as an extinguishing  ...

Water tanks & extinguishing water tanks USED & RECONDITIONED Muensterlandtanks.de Container and tank trading Call us: 0162 1341979 A used steel tank in the size of 30,000 litres is offered. Volume: 30.000 Ltr. Material: Steel tank tank, material S235JRG2 Tank shape: cylindrical, horizontal, double-walled Diameter 2.0, L approx. 10.50 m Exits: Dom on the top Departures top Tank according to DIN 6608 Tanks can be driven over and withstand the earth pressure - plastic tanks are compressed over time! Condition: Tank cleaned from the inside and provided with a new bitumen coating from the outside. Suitable for above-ground and underground storage of water, process water, rainwater, feed etc. Location Ascheberg. Transport can be arranged cost-effectively. The loading of the container on trucks or trailers is free of charge! For use as an extinguishing water tank ...

Water tanks & extinguishing water tanks USED & RECONDITIONED Muensterlandtanks.de Container and tank trading Call us: 0162 1341979 A used steel tank in the size of 60,000 Ltr. is offered. Volume: 60.000 Ltr. Material: Steel tank tank, material S235JRG2 Tank shape: cylindrical, horizontal, double-walled Diameter 2.50 m, length approx. 12.50 m Exits: Dom on the top Departures top Tank according to DIN 6608 or 6616 Tanks can be driven over and withstand the earth pressure - plastic tanks are compressed over time! Condition: Tank cleaned from the inside and provided with a new bitumen coating from the outside. Suitable for above-ground and underground storage of water, process water, rainwater, feed etc. Location Ascheberg. Transport can be arranged cost-effectively. The loading of the container on trucks or trailers is free of charge! For use as an extinguish ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Refurbished Pharmapaktor APC L200/50. The Hosokawa Alpine APC L200/50 Pharmapaktor is the perfect compactor to test the product behaviour with this technology, while it even allows to keep a continuous production at small scale if needed. The Pharmapaktor can be fitted with a flake crusher to granulate the resulting compacted material increasing the possibilities of end produc ...

Webo BR 35 V / 1250 Radial Drill Workspace Delete. v Spindle to stand smallest 280 mm / largest 1250 mm Delete. v Spindle or drill. b. Table top smallest 0 mm / largest 900 mm Delete. v Spindle to base plate smallest 200 mm / largest 1400 mm Diameter of the drill smallest 860mm / largest 2800 mm Swivel range 2,200mm / clamping diameter approx. 240mm Aufspannfl. upper 650 x 500 mm / side 770 x 500 mm Drilling spindle 40/85 ⌀ mm Speed 30 - 1800 rpm Year of construction 1971 Further technical data can be found on the machine map Item condition: used, impeccably and top maintained. Action components: Only the Webo BR 35 V / 1250 without the shown reversible clamp, this can be done individually or as a combination offer in our other Auction can be purchased. Item location: 42859 Remscheid Dismantling and transport by the buyer. The dismantling, loadin ...

Sell an Adol Aldinger combi machine consisting of sliding table saw, side milling machine and slotted hole drilling machine.Footprint with unfolded table and stop extensions, width 2m; Depth 2.7m, height table top 1m The saw comes with a side, longitudinal stop and an angle ruler. The cross stop is about 1.5m, with the screwed-on extension. The max saw blade through, esser is about 400mm The shaft for the saw blade has a diameter of 30mm. The sliding carriage can be swept off and has a movement of 1.5m. The whole carriage can be moved in the slotted holes about 40cm. The height of the saw blade can be adjusted by means of a hand crank. The table can be tilted continuously by 45° by means of a crank. The side milling machine is equipped with 2 Spindl shafts. Diameter 30mm Length about 180mm and 140mm. The height of the slotted hole drilling agreggat can be adjusted. The table ...

Fully automatic stretch film packaging machine with scale & labeler Packing Plant / Wrapper + Labeler Fabbri Group ELIXA 35 / Libra-B.285.ESP Among elixa automatic stretch wrapping machines, the Elixa 35 is the most powerful model in terms of speed (35 ppm). Like all machines in the range, the Elixa 35 is a compact stretch packaging machine developed by the Fabbri Group specifically for particularly small workspaces and retail stores. Elixa 35 can package any food that is compatible with stretch film and technology. Neutral or printed films with continuous printing are used, which offer more possibilities for communication and branding on the package. It delivers the best results in combination with Fabbri Group stretch films, but also offers excellent performance with food films from all major manufacturers on the market and achieves unparalleled packaging aesthetics.  ...

Off-road scissor lift - working platform with crawler chassis. FRONTEQ Type: FS0507T Load capacity: 200 kg Platform dimensions: 125 x 0.7 m Platform extendable + 0.6 m Transport Dimensions: 1.32 m x 1.0.8 m Height: 2.07 m Railing folded down height: 1.48 m Weight approx.: 900 Kg Working height: 6.6 m Platform height: 4.6 m Climbing ability up to: 25° Overload cut-off: Powered by battery 24 V / 115 Ah integrated charger 24 V/ 20 A 230 V power supply to the platform Bright non-marking chains German instruction manual included 2 years manufacturer's warranty Due to the compact design and the crawler chassis, the platform can be easily loaded and transported, can be easily transported with a car trailer or in a Sprinter or so with appropriate ramps. This offer is a hire-purchase leasing offer through .DLL Leasing with a ter ...

charge load: / : / weight: 720 kg diameter: 1360 mm height: 1200 mm 0: 520 l – For different processes with different dimension stone types in the same machine – Usually for large-sized and sensitive parts – Various volumes in the range of 20lt – 1250lt – Without seperating system – Deburring and polishing for all kinds of metal and non-metal materials – Suitable for automation system – Optional accessories ZCV Series machines are used for deburring, polishing, roughness removal, oil and rust removal, descaling, colour changing, delustering, aging etc processes for metal or non-metal materials. The machines in this series are generally suitable for big size and sensitive parts, and the processed parts are collected manually by the staff at the end of the process. The bowl design is one of the important factors to achieve the desired surface quality in th ...

charge load: / : / weight: 340 kg diameter: 960 mm height: 980 mm 0: 219 l – For different processes with different dimension stone types in the same machine – Usually for large-sized and sensitive parts – Various volumes in the range of 20lt – 1250lt – Without seperating system – Deburring and polishing for all kinds of metal and non-metal materials – Suitable for automation system – Optional accessories ZCV Series machines are used for deburring, polishing, roughness removal, oil and rust removal, descaling, colour changing, delustering, aging etc processes for metal or non-metal materials. The machines in this series are generally suitable for big size and sensitive parts, and the processed parts are collected manually by the staff at the end of the process. The bowl design is one of the important factors to achieve the desired surface quality in the  ...

charge load: / : / weight: 1350 kg diameter: 1760 mm height: 1240 mm 0: 1210 l – For different processes with different dimension stone types in the same machine – Usually for large-sized and sensitive parts – Various volumes in the range of 20lt – 1250lt – Without seperating system – Deburring and polishing for all kinds of metal and non-metal materials – Suitable for automation system – Optional accessories ZCV Series machines are used for deburring, polishing, roughness removal, oil and rust removal, descaling, colour changing, delustering, aging etc processes for metal or non-metal materials. The machines in this series are generally suitable for big size and sensitive parts, and the processed parts are collected manually by the staff at the end of the process. The bowl design is one of the important factors to achieve the desired surface quality in  ...

This is a granulate dishwasher from the manufacturer Wexiödisk, type WD-100GR from the year of construction 2016. Wexiödisk granulate pot dishwashers clean all stainless steel kitchen utensils with water added to plastic grains. Even burnt-in grease can be removed quickly and easily. The dishes do not need to be soaked or scrubbed; only loose food residues are scraped off to avoid unnecessary contamination of the rinsing water. Thanks to the unique, double-door push-through system, the WD100GR differs from all other pot washers on the market; The dirt and clean sides are completely separated from each other. The scope of delivery includes the inlet table, the cassette trolley and two cassettes. The inlet table is equipped with a water faucet and a hose holder, so that a hand shower can be installed quickly and easily for pre-rinsing. The dishwasher has undergone a major predictive insp ...

workpiece weight: 100 - 3.000 kg workpiece length: 5.000 mm diameter: 1.260 - 1.600 mm Control: CAP920 total power requirement: 11 kW weight of the machine ca.: 20 t dimensions of the machine ca.: 20 Container m Mobile balancing system SCHENCK for use anywhere in the world The balancing system is permanently installed in a 20 open-top container. The container is equipped with everything you need for balancing • Lighting • Metal base plate 12,000 kg as a base plate for accuracy • Compressor for working air supply distributed in the container • Compressed air connections. • A circumferential power strip • A tool cabinet equipped with tools • A hydraulic lifting device for aligning the container from the outside • In addition to a tarpaulin for the roof, the container also comes with movable roof segments made of sheet metal. • The container has a central plug through whic ...

High-quality airpad machine from a reputable manufacturer. Suitable for the production of individually defined air-filled protective and filling elements made of PA and PE film. Usually, four air cushions are created per work cycle. Different formats can be produced. For this purpose, 10 programs are available for storing several parameters. By calling up the corresponding program in the display, air cushions from 4 cm to 16 cm in length and individually defined filling levels can be produced. The resulting air cushion membranes are wound into rolls by means of a motorized device. When the roll is full, the machine automatically shuts down. Then the finished roll can be removed manually and then used as packaging material. The machine can be pushed over rollers and fixed by brakes. The machine can be demonstrated under electricity.

High-quality airpad machine from a reputable manufacturer. Suitable for the production of individually defined air-filled protective and filling elements made of PA and PE film. Usually, four air cushions are created per work cycle. Different formats can be produced. For this purpose, 10 programs are available for storing several parameters. By calling up the corresponding program in the display, air cushions from 4 cm to 16 cm in length and individually defined filling levels can be produced. The resulting air cushion membranes are wound into rolls by means of a motorized device. When the roll is full, the machine automatically shuts down. Then the finished roll can be removed manually and then used as packaging material. The machine can be pushed over rollers and fixed by brakes. The machine can be demonstrated under electricity.

Würschum semi-automatic 4-fold filling line Pneumatic filling machine with four filling stations For liquid and viscous products The filling machine has a pneumatic drive for the linear movement of the dosing piston in the stainless steel cylinder. Limit switches define very precisely the volume that the dosing piston sucks in. The dosing volume is set manually with a milliliter scale and a handwheel. This model requires only a compressed air connection, electricity is not required. The suction and dosing speed can be adjusted to the product viscosity by means of throttle valves. With an optional pneumatic manual screwdriver, the containers can be closed immediately after filling. The machine table can be rolled and can be moved to another room for cleaning after the end of production. Applications: Production and Laboratory Chemical industry Cosmetics i ...

Water tanks & extinguishing water tanks USED & RECONDITIONED Muensterlandtanks.de Container and tank trading Call us: 0162 1341979 A used steel tank in the size of 20,000 Ltr. is offered. Volume: 20.000 Ltr. Material: Steel tank tank, material S235JRG2 Tank shape: cylindrical, horizontal, double-walled Diameter 2.0 L approx. 6.80 m Exits: Dom on the top Departures top Tank according to DIN 6608 Tanks can be driven over and withstand the earth pressure - plastic tanks are compressed over time! Condition: Tank cleaned from the inside and provided with a new bitumen coating from the outside. Suitable for above-ground and underground storage of water, process water, rainwater, feed etc. Location Ascheberg. Transport can be arranged cost-effectively. The loading of the container on trucks or trailers is free of charge! For use as an extinguishing water tank, th ...

racks: 17; support tube spacing: 60mm; rack length: 650mm; langth: 200 - 2000mm; rolls: Polyamid 4 Stück; depth: 870 - 1180mm; height: 198mm; safe load: 400kg; The user-friendly Varioflex drying rack is a space-saving and gentle solution for storing painted workpieces. The four swivel castors mean that it can also be used for transporting workpieces. Its solid tube frame design can be adjusted between 200 mm and 2,000 mm. With 17 inside and outside plastic-coated support tubes on each side, the rack can support up to 400 kg of evenly distributed weight. The plug-in inside and outside support tubes can be taken out and re-inserted as needed. When not in use, the drying rack can be collapsed and takes up minimal space.

0: , St. Width: 1000 mm Length: 1720 mm Commission car RU-KWI-S --------------------------------------- The RU-KWI-S is for internal and truck transport. In When unloaded, it can be nested. For forklift and Suitable for crane transport. --------------------------------------- Equipment and accessories: -With a removable crossbeam so that the consignment trolleys are unloaded State can be pushed into each other. -With 4 crane hooks, 4 forklift brackets and 4 lashing strap holders. -Mobile on 4 polyamide swivel castors Ø 150 mm, 2 of which have brakes. -Steering rollers can be removed, so the commission trolley can stand securely on the truck. -Other equipment and accessories as for RU-KWI. --------------------------------------- Technical details RU-KWI-1600S: - Length 1,720mm - Width 1,000mm - Height 1,950mm - System height 1,500 mm - Usable width 700 mm - Weight 85kg The painting is do ...

Tenon beater, slotted and tenon milling machine FESTO Type: ZA101 5 Aggregates 2 x sawing unit 3x milling unit Guide carriage Mitre stop adjustable The machine originates from the age-related abandonment of a small construction and cabinetmaking workshop and is available now. Dismantling and loading can be organized by us. Settlement by appointment. Buyers can also pick up and test the machine themselves on site. Condition see pictures, or please refer to the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the expense of the buyer. Shipping costs are a guideline. Depending on the agreement of dismantling and loading, or removal, these may differ. Please inquire in advance ...

Key data: 600 mm

Band Saw Wood Saw Wood Band Saw CENTAURO Type: Compact 600 NL Roll diameter approx. 600 mm incl. several different saw blades Panhans roller guide at the bottom and top. The machine originates from the age-related abandonment of a small construction and cabinetmaking workshop and is available now. Dismantling and loading can be organized by us. Settlement by appointment. Buyers can also pick up and test the machine themselves on site. Condition see pictures, or please refer to the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the expense of the buyer. Shipping costs are a guideline. Depending on the agreement of dismantling and loading, or removal, these may differ. Please in ...

This hydraulic baler is specially designed for the production of bales, which have the optimal dimensions, adapted to normal maritime containers. The vertical press with 1 box has a capacity of 2 to 4 bales/hour from 300 to 450 kg depending on material. Attach packaging material As soon as the previous bale is removed from the baler, the operator places a new bale. Packaging material on the lower press plate. The operator brings the press into the Starting position, ready to fill. Filling and pressing cycle The filling of the box is done manually via 2 filling doors. When the press box is full the doors are closed and the press starts the cycle. The Press Plate comes down and compacts the material under the barbs. Next, the press plate rises back up allowing the operator to refill the press can. The number of cycles per bale depends on the quantity and density of the bale.  ...

Veneer Press Gluing Press Plate Press Heat Press OTT Type: JU 65 YOC 1977 Press dimensions : 120 x 225 cm incl. heating plates The machine originates from the age-related abandonment of a small construction and cabinetmaking workshop and is available now. Dismantling and loading can be organized by us. Settlement by appointment. Buyers can also pick up and test the machine themselves on site. Condition see pictures, or please refer to the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the expense of the buyer. Shipping costs are a guideline. Depending on the agreement of dismantling and loading, or removal, these may differ. Please inquire in advance for more detailed cond ...

Lock Box Milling Machine Chain Clamp Chain Milling Machine Door Lock Milling Machine HAFFNER Type: SL100 3 Aggregates Chain stemmer. Stülpfräe Handle / door lock cutter rollable The machine originates from the age-related abandonment of a small construction and cabinetmaking workshop and is available now. Dismantling and loading can be organized by us. Settlement by appointment. Buyers can also pick up and test the machine themselves on site. Condition see pictures, or please refer to the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the expense of the buyer. Shipping costs are a guideline. Depending on the agreement of dismantling and loading, or removal, these m ...

CharacteristicsSwing- Ø, max.450 mmWeight approx.10000 KgDrive power milling spindle9,5/5,5 kWDrive power main spindle15/11 kWDrive power second spindle15/11 kWNumber of Toolmagazine positions38 Speed max.12000 rpmSlewability of B-Axis+/-120 degreeMovements X / Z / Y455/800/+-105 mmMilling spindle upper side1 Input precision of C-axis on Counterspindle0,001 degreeSpindle speed 2nd Spindle max.6000 rpmInput precision of C-axis on Mainspindle0,001 degreeBar diametre52 mmSpeed max.6000 rpmMax. Turning Length800 mmMax machining diameter430 mmDimensions (L x W x H)4,17 x 2,5 x 2,5 (4,55 x 2,5 x 2,5) mGeneralTurning-milling centre SZM: Tool spindle, Spindle 1, Spindle 2 and Turret 2 (Milling); Control: CELOS - ERGOline Spindle 1 hobbing functionSpindle 1 hobbing function Gear machining or spline machining is possible by synchronizing the rotary tool spindle rotation on turret 1 with the spind ...

Fully automatic stretch film packaging machine Packing Plant / Wrapper Fabbri Group ELIXA 21 / B.283.XS Elixa 21 reaches a maximum speed of 21 packs per minute, making it one of the ideal solutions for use in stores. Like all the machines in the Elixa range, the Elixa 21 is an automatic, compact and reliable stretch wrapping machine designed by the Fabbri Group specifically for particularly small workspaces and for the back rooms of retail stores. Elixa 21 can pack all foods compatible with stretch film and technology, reaching a maximum speed of 21 packs per minute. Neutral or printed films with continuous printing are used, which offer more possibilities for communication and branding on the packaging. It delivers maximum results in combination with Fabbri Group stretch films, but also offers excellent performance with food films from all major manufacturers on the marke ...

Control generation: EKC2 (knitelligence® generation) Multi-touch panel: Yes Working Width: 50" / 127 cm Knitting and transfer systems: 3 (front/back) Spacing between systems: 5" fine mesh (E10-20; E6.2-10.2) 5.2" coarse mesh (2.5.2-5.2; E5-8) Machine dimensions: Length 3080 mm / Depth 1203 mm Supply voltage: Flexible power supply (AC 230V/400V +/-10%) Yarn guide: Direct (from above) Yarn carrier: 16/24/32 all in one Yarn Control Units: 16/24/32 Clamping and cutting device: 8/12/16-speed left/right Take-off system: Multiflex + auxiliary + comb or Ribbon with comb Innovation Packages: - Improved central lubrication Oil Collection Tank Switch for forward and backward rotation of the belt pick-up system Mirrors in the fabric storage area for Strip Removal Machines Lighting in the fabric storage area Can-Open Feeder Wheel Interface Split stitch without exchan ...

Control generation: EKC2 (knitelligence® generation) Multi-touch panel: Yes Working Width: 50" / 127 cm Knitting and transfer systems: 3 (front/back) Spacing between systems: 5" fine mesh (E10-20; E6.2-10.2) 5.2" coarse mesh (2.5.2-5.2; E5-8) Machine dimensions: Length 3080 mm / Depth 1203 mm Supply voltage: Flexible power supply (AC 230V/400V +/-10%) Yarn guide: Direct (from above) Yarn carrier: 16/24/32 all in one Yarn Control Units: 16/24/32 Clamping and cutting device: 8/12/16-speed left/right Take-off system: Multiflex + auxiliary + comb or Ribbon with comb Innovation Packages: - Improved central lubrication Oil Collection Tank Switch for forward and backward rotation of the belt pick-up system Mirrors in the fabric storage area for Strip Removal Machines Lighting in the fabric storage area Can-Open Feeder Wheel Interface Split stitch without exchan ...

Control generation: EKC2 (knitelligence® generation) Multi-touch panel: Yes Working Width: 50" / 127 cm Knitting and transfer systems: 3 (front/back) Spacing between systems: 5" fine mesh (E10-20; E6.2-10.2) 5.2" coarse mesh (2.5.2-5.2; E5-8) Machine dimensions: Length 3080 mm / Depth 1203 mm Supply voltage: Flexible power supply (AC 230V/400V +/-10%) Yarn guide: Direct (from above) Yarn carrier: 16/24/32 all in one Yarn Control Units: 16/24/32 Clamping and cutting device: 8/12/16-speed left/right Take-off system: Multiflex + auxiliary + comb or Ribbon with comb Innovation Packages: - Improved central lubrication Oil Collection Tank Switch for forward and backward rotation of the belt pick-up system Mirrors in the fabric storage area for Strip Removal Machines Lighting in the fabric storage area Can-Open Feeder Wheel Interface Split stitch without exchan ...

Control generation: EKC2 (knitelligence® generation) Multi-touch panel: Yes Working Width: 50" / 127 cm Knitting and transfer systems: 3 (front/back) Spacing between systems: 5" fine mesh (E10-20; E6.2-10.2) 5.2" coarse mesh (2.5.2-5.2; E5-8) Machine dimensions: Length 3080 mm / Depth 1203 mm Supply voltage: Flexible power supply (AC 230V/400V +/-10%) Yarn guide: Direct (from above) Yarn carrier: 16/24/32 all in one Yarn Control Units: 16/24/32 Clamping and cutting device: 8/12/16-speed left/right Take-off system: Multiflex + auxiliary + comb or Ribbon with comb Innovation Packages: - Improved central lubrication Oil Collection Tank Switch for forward and backward rotation of the belt pick-up system Mirrors in the fabric storage area for Strip Removal Machines Lighting in the fabric storage area Can-Open Feeder Wheel Interface Split stitch without exchan ...

Cool Compact Magnos 650 Refrigerator with Glass Door  Versatile convection refrigerator  excellent for commercial kitchens, restaurants, butchers, bakeries Cool Compact Refrigerator Magnos 650 with Glass Door suitable for use with GN 2/1 containers (grid size 530 x 650) with convection cooling and electronic control inside/outside CNS 18/10 ( also back wall, bottom and cover plate ) Warning by visual and acoustic signal Compressor Protection Function suitable for the tropics - suitable for ambient temperatures up to 43ºC Automatic evaporation of condensation by hot gas Cooling body made of one piece high-pressure foamed self-closing and lockable door, door hinge on the right Evaporator-free interior Drawers with telescopic full-extension extensions made of stainless steel 1.4509 Very stable drawer guide: loadable up to 60 kg Electronic control with 4 top performanc ...

The iCombi Pro is the latest combi steamer from RATIONAL. The iCombi Pro 10-1/1 Electric model with 10 shelves GN 1/1 is easy to use, even for unskilled personnel, as you can achieve outstanding food quality without the need for supervision. The device has been tested in our in-house specialist workshop and is fully functional. The undercarriage shown is not part of the offer, but can be purchased for an additional charge. The RRP. amounts to 15.090 € net The price quoted is net plus 19% VAT. Service: We would be happy to put you in touch with a certified Rational customer service throughout Germany. Our equipment service for you: •6 months warranty on all electrical parts • High-quality branded appliances at fair prices • Professional and competent advice - before and after the purchase •Free shipping within Germany (excl. islands/mountain stations) • Pr ...

Combi steamer Manufacturer: UNOX / Type: BAKERTOP Specifications: Model oven: XEBC-06EU-E1R Including base frame & extractor hood 400V / 50/60Hz / 9.9 kW / 16 A CEE plug 230V Schuko plug for the extractor hood Year of construction: 2019 RRP with base: approx. EUR 10,000 General: BAKERTOP MIND. Maps Bakery Oven / Combi Steamer by Unox Body made of stainless steel Low energy consumption due to high-quality insulation Door with double security pane Air gap prevents strong heating of the outer pane inner glass pane can be opened for cleaning Door with carbon fiber door lock and long-bend door hinges Door hinge left / door handle right (door hinge can be changed to the right – see accessories) with condensate tray under the door (direct drain connection) Safety thermostat height-adjustable screw feet Baking chamber: completel ...

x-travel: 950 mm y-travel: 400 mm z-travel: 500 mm tool taper: ISO 50 throat: 510 mm quill stroke: 105 mm spindle turning speed range: 18 - 1800 U/min feeds: 16 - 627 mm/min rapid traverse: 1670 mm/min table-size: 1400 x 400 mm table load capacity: 500 kg T-slots: 3x14x100 mm distance spindle /table: 150 - 650 mm engine output: 9,0 kW weight: 3660 kg dimensions of the machine ca.: 2290 x 1770 x 2120 mm current new price approx. 60.000 euros Special price on request The heavy universal bed milling machine offers wide guides and high Drive power for superior cutting performance and is with your Extensive equipment ideal for plant and mechanical engineering suitable. The heavy vertical milling head can be swiveled right and left, The quill can be moved manually and the spindle speed can be adjusted continuously regulate. The feed in the Y and X axes can be done via a robust Manual transmi ...

For sale is a plate winder with roller conveyor. Everything works perfectly. The roller conveyor can be manually moved forward/backward on the control element with the option switch of the hold-down device. The entire column can be folded down for transport. All operating instructions or circuit diagrams are included. The winder can be perfectly installed in a system with a roller conveyor. OR you can dismantle the roller conveyor. A video of the winder in action can be sent on request. Pick-up/shipping available. Loading assistance available. All prices are subject to 19% VAT.

VM PLC CONTROLLED POWDER COATING RECIPROCATOR The powder coating reciprocator is designed for automated painting applications. It ensures perfect coating of the work pieces passing in front of it by moving the spray guns up and down in a single axis. It moves in one axis along the vertical guide column, providing maximum performance under daily working conditions withstanding continuous load. The brake drive motor and gearbox have been selected to ensure the reciprocator’s long life and performance under heavy working environment conditions. The mechanical system design with chain or belt provides silent and vibration-free vertical movement. Perfect coating is achieved with easy adjustment of stroke and speed. RECIPROCATOR CONTROL UNIT • Remote control panel 7" 65K color hand touch LCD screen, • Two reciprocators can be controlled independently from the same display, � ...

Universal Automatic tablet testing system - Measuring equipment for laboratories - Tool for tablets Allows to test : Hardness Diameter Thickness Weight Accuracy Scale Sartorius WZ64S Range: 10 to 50 g Unit: mg / 0.5 mg / 0.1 mg adjustable Thickness Drive: stepper motor. Measuring principle: Linear potentiometer. Unit of Measure: mm or inch. Tolerance; +/- to.1 mm Hardness Drive: stepper motor. Measurement: Load measuring cell (lmz) Measuring principle: Torque gauge Unit: N, Kp or Sc Diameter Drive: stepper motor. Measuring principle: stepper motor. Unit of Measure: mm or inch. Range: 3 - 18 mm / 3 - 30 mm (manual) Tolerance: +/- 0,1 mm Voltage: 100 / 240 V, 50Hz / 60 Hz The UTS is a universal and fully automated test system developed for use in industry. This tool is the approved model of a series of test systems that have been tested for man ...

Key data: 1360 mm, 1 , 150 mm

Wide belt sander belt sander veneer sander OTT Type: ALPHA 136 one belt combi unit - Calibration loops via roller - Fine grinding with rigid sanding pad - Veneer grinding with insert-controlled air shoe Sanding width up to approx. 135 cm Passage height approx. 3 - 150 mm Cleaning brush at the outlet Motor power 11 KW Total power approx. 13.3 KW Belt speed 18m/sec Feed rate max. approx. .8m/min Dimensions approx. 2.06 x 2.0 x 2.1 m Weight approx. 2600 Kg The machine originates from the age-related abandonment of a small construction and cabinetmaking workshop and is available now. Dismantling and loading can be organized by us. Settlement by appointment. Buyers can also pick up and test the machine themselves on site. Condition see pictures, or please refer to the item description. Parts can also be picked up by yourself. All measuremen ...