can used for sale

Shredder, industrial shredder, 2 wave star breakers, glass shredder, rotor scissors, star mill, garbage shredder, two-shaft shredder, two-shaft shredder, shredder with filler for wheel loader used The shredder can also be used as a single position. Manufacturer: SANT'ANDREA NOVARA Type: G30/1570 Built in 2003 Speed of the fast wave: 17.7 rpm Speed of the slow wave 9.3 rpm Turning monent. 11875 Nm Engine VEM 22 kW 400/690 V Dimensions Shredder: approx. 2500 x 1000 x height approx. 400 mm with motor 1500 mm Dimensions of cutting unit approx. 1600 x 810 mm Throw-in height approx. 4.6 m Throw-in funnel approx. 3 x 2 m the drop-in funnel is closed by a percular upward opening slider approx. 2.5 x 1.5 m. Total dimensions of the steel construction: approx. 3 x 2 x 8 m In the shredder, used glass was broken for a foam glass bulking system. Originally, the recycling of fluo ...

P181 - used approx. 40 m³ / 40,000 litres PE-HD-tank, plastic tank, flat bottom tank, double-walled with an outer hull. specifications: capacity: approx. 40 m³ / 40,000 litres material: PE-HD tank, plastic tank manufacturer: Formoplast Kunststofftechnik GmbH measurements: Ø approx. 3,49 m outside / Ø approx. 3,00 inside x height tank approx. 5,70 m / total height approx. 6,50 m mark of conformity: PA-VI 321.103 specific weight: 1,13 kg/L media: former chemical tank for formalin DIBT and media list available, suitable for AHL and ASL PE-HD tank, professionally cleaned and in good condition. Double-walled, i.e. with an outer hull, non-translucid, various connections such as ventilation, inlet, suction pipe, etc., lid on top of the roof. According to the media list suitable for many different chemicals e.g. iron chloride, hydrochloric acid, acetic acid, caustic soda, sul ...

Spectro CIROS CCD Water Analyzer - Height: 105cm - Width: 150cm - Depth: 75cm Good condition fully functional can be visited and tried out on site. Shipping abroad. Visit: Basically, I would like to point out to you that in order to avoid misunderstandings, the article can be viewed before purchase and tested under electricity. Please ask questions before purchasing to avoid any ambiguity. If you have any general questions or make an appointment for a visit, I can be reached at any time at the telephone number below. Errors in the description and intermediate sale reserved. The VAT is shown separately on my invoices. Shipping with forwarding.

P213 - used approx. 30 m3 / 30,000 L polyester tank, GRP tank, Speidel tank, standing, flat bottom. Technical details: Content: approx. 30 m3 / 30,000 litres Material: Polyester tank / GRP tank Manufacturer: Speidel Tank- und Behälterbau GmbH Dimensions: approx. 3.00 m x approx. 4.60 m high Other: Used polyester tank in very good condition, manufacturer Speidel. Vertical flat bottom tank, dome at the top of the roof, several connections, incl. filling line. The container can be used as a storage tank for many different media such as water, liquid food, whey, potato vapour bowls, molasses, manure, seepage juice, rapeseed oil or as a rain collection tank, etc. Price on request. Transportation can be arranged cheaply. We can also rework the tank as desired, please ask us. It is not possible to update all our listings daily. As our stock is constantly changin ...

Contact belt grinding machine - Width: 100cm - Depth: 50cm - Height: 200cm - 1 kW - 1400 rpm Good condition fully functional can be visited and tried out on site. Shipping abroad. Bjb9nyul9y Visit: Basically, I would like to point out to you that in order to avoid misunderstandings, the article can be viewed before purchase and tested under electricity. Please ask questions before purchasing to avoid any ambiguity. If you have any general questions or make an appointment for a visit, I can be reached at any time at the telephone number below. Errors in the description and intermediate sale reserved. The VAT is shown separately on my invoices. Shipping with forwarding.

Qty. 1 Second-hand cut-to-length line Mfc.: Stratega Built: 2006 Direction right to left Strip width: 400 - 2020 mm Thickness: 0.4 – 2.5 mm De-coiler ID 508, 610 mm Weight: 25 Ton Length of sheets: 300 – 2000 mm Speed: 60 m/min. Leveller Tilting shear Magnetic belts stacker Consist of: Load cradle De-coiler Award spire Introduction table Leveller Feeder Towing pinch roll Tilting shear Evaquation shear wasting material Conveyor Magnetic stacker Eletrical panels & Control Hydraulic station Note: The lien has the guillotine that can cut metal sheet with trapez format cause the guillotine Can rotate or can be used as a normal cut-to-length line.

Stock# U2347-1 Used mixer by Buhler (CH) type SPM-50-HT with butterfly/tri-foil agitator for work on vacuum. Mixer has contact parts designed in non-corrosive steel. Mixing shaft has length about 1750 mm and is equipped with butterfly agitator, with three paddles and external diameter 1040 mm. Top cover is equipped with two pneumatic accutators and fits mixing pans with diameter 1100 mm. Cover can be rised up to 500 mm. Agitator is belt driven by el motor 45 kW, 1470 rpm, 380/660 V, 50 hz. Mixer is hydraulically risen about up to 90 cm. Machine is equipped with local control panel by Siemens with touchpad and electric cabinet. Machine is also equipped with hydraulicaly operated post for mixing can. Working pressure in mixing tank can reach 0.3 bar. Machine had been working on paints. Mixing pan is not included.

- Total height: 1000 mm - Turnboard to top edge sack: 900 mm - Base plate / foot: 1000 x 1000 mm Details The rotary device can hold 4 plastic bags (used to accommodate small parts of a injection moulding machine). After reaching a number of pieces (pulse that the bag is full), the device rotates 90°. Equipped with an engine and gearbox, as well as a sensor that triggers every 90°, the control can be adjusted depending on the system, total height up to sack top edge 980 mm, rotation speed 4.5 rpm, via another gear the speed can be adjusted

Punching machine EDEL - Maximum power: 25to. - Extension 26 cm - Height: 170cm - Width: 65cm - Depth: 50cm Good condition fully functional can be visited and tried out on site. Shipping abroad. Visit: Basically, I would like to point out to you that in order to avoid misunderstandings, the article can be viewed before purchase and tested under electricity. Please ask questions before purchasing to avoid any ambiguity. If you have any general questions or make an appointment for a visit, I can be reached at any time, using the telephone number below or above. Errors in the description and intermediate sale reserved. The VAT is shown separately on my invoices. Shipping with forwarding.

Wieland Suction Cup IS-30 T - Weight: 100 kg - rpm: 2895 - 3 kW - Space requirement: 600 x 1200 x 1200 mm Wieland Suction Cup IS-35 T - Weight: 90kg - RPM: 2895 Good condition fully functional can be visited and tried out on site. Shipping abroad. sightseeing: Basically, I would like to point out to you that in order to avoid misunderstandings, the article can be viewed before purchase and tested under electricity. Please ask questions before purchasing to avoid any ambiguity. If you have any general questions or make an appointment for a visit, I can be reached at any time, using the telephone number below or above. Errors in the description and intermediate sale reserved. The VAT is shown separately on my invoices. Shipping with forwarding.

Walter sliding grinding system - Hydraulic adjustment - Weight: 450kg - Capacity: 70 usable litres - Type: Rotating tumbling cylinder - Other info: Variable speed machine - External dimensions (WxDxH): 800 x 1500 x 1600mm Good condition fully functional can be visited and tried out on site. Shipping abroad. Visit: Basically, I would like to point out to you that in order to avoid misunderstandings, the article can be viewed before purchase and tested under electricity. Please ask questions before purchasing to avoid any ambiguity. If you have any general questions or make an appointment for a visit, I can be reached at any time at the telephone number below. Errors in the description and intermediate sale reserved. The VAT is shown separately on my invoices. Shipping with forwarding.

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant With the Bexmill A BM soft to medium-hard substances are crushed gently. The Bexmill is also called basket type mill or conical mill. The mill can be charged both, continuously and discontinuously. From the feed unit the material to be crushed reaches the grinding area. Due to its conical form the Bexmill A BM can be operated in contrast to the classic Flake Crusher at higher revolutions. Through this larger throughputs and higher fineness can be achieved ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant The Alpine Ultraplex UPZ is a universal impact mill that can be fitted with a variety of easily interchangeable grinding tolls to achieve different results, such as pin disc, beater disc or pendulum beater. Certain grinding tools can operate together with different grinding tracks, sieves or a combination of both to achieve the desired fineness. This allows the same machine to process many different products such as fibrous roots or spices to plastics, gr ...

The SUPERBOX is a box butterfly that feeds, opens, folds, shapes the boxes and seals their lower part with adhesive tape. Its great versatility also lies in the possibility of using commercially available adhesive tape rolls. The machine consists of a cardboard magazine, an area where the cartons are opened and an output roller conveyor, on which the bottoms of the folding cartons are provided with adhesive tape. The format change is conveniently controlled via 5 handwheels, which is followed by an adjustment of the passport stamps of the cardboard magazine and the position of the suction cups. specifications Product dimensions: Length: 570 mm Width: 410 mm Height: 500 mm Min. product dimensions: Length: 250 mm Width: 170 mm Height: 90 mm Cardboard magazine for standard machine: 50/60 Operating voltage: 400V 3Ph+T 50Hz (others on request) Power consumption: 1 kW  ...

A 208 liter barrel with gear oil is offered. Manufacturer Totoal Type: Dynatrans MPV (old name Transmission WB) Applications: For lubrication of mechanical gearboxes, converters, hydrostatic transmissions, hydraulic systems, power steering, Oil bath clutches and oil bath brakes. Can be used in gearboxes when a gear oil according to API GL-4 is required in SAE class 10W-30 or 80W. Can be used in hydraulic systems when an HVLPD oil (DIN 51524-3) is required in ISO VG 68. characteristics International Specifications: API GL-4 Shares: Massey Ferguson CMS M 1145, M 1143 Volvo CE WB 101 John Deere: JDM J20C ZF TE-ML 03E/ 03L/ 05F/ 06P/ 17E/ 21F TotalEnergies recommends the use of: McCormick HTX Valtra G2-08 Ford M2C 134D and FNHA 2C 201.0 Case MS 1206/ 1207/ 1209 CNH MAT 3505/ 3509/ 3525/ 3526/ 3540 New Holland NH 410B / NH 410C Massey Ferguson CSM M 1135/ M1141  ...

Multi-blade saw Paul K 34 O Complete cutting system with Paul 18 E cross-cut saw and K 34 O/800 GL multi-blade saw Year of construction: 12/1998 -Chain conveyor with lifting platform -Roller conveyor -Cross-cut saw Paul Type 18 E, 12.5 kW -Conveyor belt -Defect roller -Ejection station for cuts -Waste conveyor belt -Roller conveyor -Centering -Multi-blade saw Paul Type K 34 O/800GL, 90 kW, Working width 800 mm, saw blade diameter. 210 mm, 5200 rpm, Synchronisation machine, shaft diameter 60 mm Drip tray Roller conveyor Hydraulic pump 5.5 kW, Miscellaneous 5 kW The system is fully functional, including control cabinets, saw shafts, intermediate rings, saws and documentation. Hardwood with the following data is processed on the plant: Wood thickness: 26 mm – 50 mm Input lengths on the cross-cut saw: 1000 mm to 5000 mm or more Multi-blade saw: 350 mm to 10 ...

40m3 storage tank for AHL/ASL - steel tank used storage container 40,000 litres capacity for storage of liquid fertilizer / AHL / ASL with brand-new plastic inner shell The container corresponds to DIN 6616, has 2 saddle feet, an ascent ladder and is professionally emptied and cleaned inside. D = 2.50 m - L = approx. 8.70 m. The container receives a brand new plastic inner shell - resistant to the storage of liquid fertilizers - incl. leak warning device mounted in the protective box - see sample photo. The inner plastic sleeve has a "General Building Supervision Approval" and is therefore used for the storage of liquid fertilizer AHL nox reducing agent AUS 32 (AdBlue). The container is completely ground on the outside, re-primed and repainted in desired colour according to RAL. The price is ex works - freely charged. Delivery time = by arrangement.  ...

Liquid fertilizer / AHL / ASL - Tank tank storage tank storage tank a used storage tank 100,000 litres for storage of liquid fertilizer / AHL / ASL with a brand-new plastic inner shell. The container corresponds to DIN 6616, has 2 saddle feet, is professionally emptied and cleaned inside, incl. ladder. The container receives a brand new plastic inner shell - resistant to the storage of liquid fertilizers - incl. leak warning device mounted in the protective box - see sample photo. ASL (ammonium sulfate solution) is a sought-after liquid fertilizer used in drying plants during the drying of liquid fermentation residues and during exhaust air purification. Due to the corrosive properties of the bearing medium, ASL containers require an inner plastic shell. The inner plastic sleeve has a "General Building Supervision Approval" and is therefore AHL for the storage of ...

P228 - 4x used approx. 50 m³ / 50,000 L polyester tank, GRP tank, aboveground, vertically standing, flat bottom, in good condition. technical details: capacity: approx. 50 m³ / 50,000 litres material: polyester tank / GRP tank manufacturer: Reich-Tank dimensions: Ø approx. 3.00 m × h approx. 7.20 m Used, in good condition, manufactured by Reich company, vertically standing storage tank on flat bottom, lid on the roof, several connections, inlets and outlets. This container can be used as a storage tank for many different media such as water, liquid food, whey, potato steam skins, molasses, manure, seepage juice, rapeseed oil or as a rainwater collection tank, etc. Price upon request. Transport can be arranged at low cost. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has al ...

Energy chain series E4.80, 10,5m, E4.80.45.200 Igus, new -50% We have set the lowest price for the new part on the market. If you have a VAT number, we will gladly issue you an invoice without VAT. Current new price € 2074 New in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely new and in its original packaging. - 94 chain links incl. 2 end pieces - Chain length 10,5m - Additional 6 end pieces - Additionally some chain links as spare parts - Energy chain can be opened on both sides - Width 500mm, height 108mm, - Inner width 450mm, inner height 80mm, - Bending radius 200mm Function guarantee! For second hand parts, we can not accept any conventional guarantee and warranty. Since we know that the device works, we give you a functional guarantee when you buy it. If the device d ...

Tool grinding machine Walter UWS30 CY - original condition - Width: 120cm - Height: 140cm - Depth: 100cm - with electric stroke adjustment - Sub-machine, 8 grinding shots - Grinding wheel pulling device - Electrical documentation + equipment Good condition fully functional can be visited and tried out on site. Shipping abroad. Visit: Basically, I would like to point out to you that in order to avoid misunderstandings, the article can be viewed before purchase and tested under electricity. Please ask questions before purchasing to avoid any ambiguity. If you have any general questions or make an appointment for a visit, I can be reached at any time, using the telephone number below or above. Errors in the description and intermediate sale reserved. The VAT is shown separately on my invoices. Shipping with forwarding.

Baler, press for cardboard, film paper V5 | 5t Bale size: 700 mm H (variable) × 750 mm W × 500 mm D Bale weight: 50–100 kg Pressing time: 28 seconds Pressing force: up to 5 tons Dimensions: 2015 mm H × 870 mm W × 655 mm D Filling opening: 750 mm W × 385 mm H Integrated bale ejection mechanism Weight: 340 kg Power supply: Single-phase motor with 220 V 50 Hz 1.5 kW Noise: 70 decibels E-Power DIN EN 16500 IP54 protection class PLC with automatic cycle CE Certification V5 SMALL BALER Versatile, efficient and simple operation: The V5 baler is ideal for small and medium-sized companies. Even with a small amount of material, it creates order, cleanliness and space. The setting of the pressing cycle on the V5 can be done either automatically or manually. With the help of the "Easy Tie" system, the finished bale can be tied quickly and conveniently when the door is ope ...

Mini roller cutter Our range now also includes machines for processing residual rolls, for example from paper production, the packaging industry, printing houses, textiles, aluminium rolls, film rolls, etc. These heavy rollers cannot be processed efficiently and safely with the normal cutting systems, but with these special "guillotine" roller cutters this is no longer a problem. The mini roller cutter can be seen here as a standard version. We offer the Mini roller cutter in version G20 / 25 and G30. All data can be customized according to the customer's wishes. (Sensors | Protective grille | Light barriers | colour, etc.) Roll width: max. 700 mm Roller height: max. 800 mm Drive: 5.5 Kw Cutting force: 25 T cylinders Weight: 1200 kg Working cycle: 65 seconds Including automatic return: Important roll cutting width and roll cutting height can be adjusted as desired. Dep ...

The brand new container corresponds to DIN 6616, has 2 saddle feet, an ascent ladder and is primed on the outside - on untreated sheets. D = 2.50 m - L = approx. 10.70 m. The container receives a brand new plastic inner shell incl. leak warning device mounted in the protective box - see sample photo. The inner plastic sleeve has a "General Building Supervision Approval" and is therefore used for the storage of liquid fertilizer AHL nox reducing agent AUS 32 (AdBlue). The price is ex works - freely charged. We recommend: Above containers sandblasting from the outside, prime and completely repaint - iron grey / RAL hue. (On request, other RAL colours are also possible!) ASL (ammonium sulfate solution) is a sought-after liquid fertilizer used in drying plants during the drying of liquid fermentation residues and during exhaust air purification. ASL container  ...

Feinbau Scherer PM 1 F-2 - 3 speed levels on the right - 3 speed levels on the left - Weight: 180kg - Height: 120cm - Depth: 50cm - Width: 100cm Good condition fully functional can be visited and tried out on site. Shipping abroad. Visit: Basically, I would like to point out to you that in order to avoid misunderstandings, the article can be viewed before purchase and tested under electricity. Please ask questions before purchasing to avoid any ambiguity. If you have any general questions or make an appointment for a visit, I can be reached at any time, using the telephone number below or above. Errors in the description and intermediate sale reserved. The VAT is shown separately on my invoices. Shipping with forwarding.

Polishing machine steel - Continuous speed - Height: 130cm - Depth: 110cm - Width: 100cm - Weight: 500kg Good condition fully functional can be visited and tried out on site. Shipping abroad. Visit: Basically, I would like to point out to you that in order to avoid misunderstandings, the article can be viewed before purchase and tested under electricity. Please ask questions before purchasing to avoid any ambiguity. If you have any general questions or make an appointment for a visit, I can be reached at any time, using the telephone number below or above. Errors in the description and intermediate sale reserved. The VAT is shown separately on my invoices. Shipping with forwarding.

The X-MET8000 handheld XRF devices offer high performance for the reliable testing of materials and chemical compositions: fast, precise analysis for fast sorting (metals, polymers, wood, solutions, soil, ores, minerals, etc.). The X-MET is practical, robust and easy to use, for results you can rely on. The X-MET is perfect for the analysis of light elements (Mg, Al, Si, P, S, Cl). It offers the lowest detection thresholds with laboratory-quality results in seconds, day after day. Test a wide range of materials with the versatile fundamental parameter (FP) method and empirical calibrations (traceable to certified reference materials) where the highest precision and accuracy are required. Friendly The intuitive, icon-based user interface requires minimal operator instruction. Excellent ergonomics Lightweight (only 1.5 kg), compact, ergonmomic. You can use the X-MET for a lo ...

Fill 3D-Ultrasonic Cutter Here we offer you a Fill 3D ultrasonic cutting system. Fill 3D-ULTRASONIC SCHNEIDER 3D ULTRASONIC CUTTER The 3D ultrasonic cutter from Fill enables three-dimensional contour cutting of fiber-reinforced plastics using ultrasonically excited cutting systems. Your advantages: Ergonomic feeding and unloading Easy creation of bleed programs (NC control) Space-saving system concept (as an alternative to the robot) High repeatability High process stability Easy and fast tool change Possible integration into an overall process chain The principle: The linear axis portal enables precise guidance of the ultrasonic knife with a small footprint and simple kinematics. Thanks to the Siemens 840 D CNC control, the trimming device can be programmed like a machine tool. Tool corrections or path changes can simply be carried out directly on the machine. As standa ...

Karl Hertel Bending Bench / Round Bending Machine Kombi - Width: 150cm - Depth: 90cm - Height: 120cm - Weight: 350kg Good condition fully functional can be visited and tried out on site. Shipping abroad. Visit: Basically, I would like to point out to you that in order to avoid misunderstandings, the article can be viewed before purchase and tested under electricity. Please ask questions before purchasing to avoid any ambiguity. If you have any general questions or make an appointment for a visit, I can be reached at any time, using the telephone number below or above. Errors in the description and intermediate sale reserved. The VAT is shown separately on my invoices. Shipping with forwarding.

Used cutting machine Hundegger K2 Manufacturer: Hundegger, DE Type: K2 Built: 2000 Condition: used, in operation, very good Consisting of: 1. Fully automatic wood conveying with feed roller conveyor and feed and feeding cross conveyor Consisting of a roller conveyor with cross-over from the cross conveyor with 5 strands equipped with hinge tape chains, which ensure injury-free transport Length: 9.2 m, Width: 2.2 m 2. Lower table swivel crosscut saw with 4-axis control With a carbide saw blade of 740 mm (11.0 KW) max. saw cutting depth: 300mm at 90° infinitely adjustable machining stroke with positioning drive pivotable 0- 360°, inclination 0-65°, drive servo-hydraulic, With this aggregate, all saw cuts, such as angles and shitging sections, longitudinal sections for burring and lruning, hewing or stash sections) are executed. Thanks to the 4-axis control, witch  ...

Choose a suitable roaster and stay flexible! We can offer various roasters as follows: - Short-term rental of min. 1 year - long-term rental incl. maintenance contract - discounted takeover option after expiry of the contract. - Roaster color can be determined individually. - Roasters are delivered, installed and your staff trained. - Entsteiner, Afterburner and Coffee Loader can also be ordered on request. - and much more! Contact us and find your perfect equipment! We have many ways to meet your exact needs. Get the all-in package and you don't need to spend time in the maintenance etc. of used roasters. Focus on your business and roasting process!

Flow filter, membrane filter housing, MSS 5010 GNW 50BH4, Pall, Stainless steel, used Top Attention! We have set the lowest price on the market for a comparable used part. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. Used part! The part was purchased from a spare parts warehouse of a company, is in very good condition and fully functional. - The filter is completely clean and bright. - Stainless steel (316L), - Incl. 5 cartridge filters - Cartridge filter length approx. 52cm - Incl. pressure manometer, - max. operating pressure 10 bar - max. temperature 95°C - 38 x 30 x 127cm high, 30kg, - Product connections in nominal width 50 / dairy pipe thread - high quality pharmaceutical version - for H2O: 10-15,000 l/h, for wine depending on application 1,000 to 2,000 l/h, for spiri ...

With the three-head roller saw, plastic-coated films can be sawn from wide roll to customer roll. With the system, film rolls can be sawn on 3" and 6" cardboard or plastic sleeves. The first cutting head is firmly positioned and defined as a master. The other two cutting heads are positioned to the master on the desired cutting width. A maximum of 2 benefits are possible. Sawing operations can be sawn dry, or wet by a wetting device of the saw blade. • Mesh type: Saw Material: Foil • Cutting system: circular saw s600 mm ( 3 saw cuts ) Saw cutting width: 6mm • Space usage: 7m x 4m Dimensions machine: 4.20m x 2m (height closed 2.15m, open 3,50m Sleeve width max.: 2700mm Cut width max.: 2620mm Cutting width min.: 500mm • Rolls max. : 550mm • Rolls min. : 200mm Sleeve diameter: 76mm/152mm

Control cabinet for MAHO 600 - MAHO had manual transmission damage and was therefore exploited. - Are also other parts in stock. Please inquire! Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.

Supra pot grinding machine - Width: 400 mm - Depth: 400 mm - Height: 800 mm - Table diameter: 150 mm Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.

Linear machine to rins empty cans with filtered water incl. 2 can turning stations and 1 rinser station capacity: up to 3,000 cans/h optional: easy to adjust for another can format: You just need two other can turning stations

Saacke Universal Tool Grinding Machine - with partial apperat - with cylindrical loop device - with collet chuck - with many grinding wheels Center height: 125mm, Center width: 600mm, Speed: 3300/ 5400/min, Grinding length: 500mm, Table dimensions: 835x145mm, Grinding wheel dimensions: 175x20mm - with coolant devices Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with f ...

bore capacity in steel (diameter): 30 mm x-travel: 850 mm y-travel: 435 mm Control: HEIDENHAIN TNC 150 total power requirement: 16 kW weight of the machine ca.: 3500 kg dimensions of the machine ca.: m F E H L M A N N (Switzerland) CNC-Controlled High Precision Drilling and Milling Machine with HEIDENHAIN CNC-Control Model TNC 150 Model PICOMAX 100 CNC – 2 + A Year 1985 Serial No. 16 085 109 _______________________________________________________________ Table travel: Longitudinal ( X-Axis) 850 mm Cross (Y-Axis) 435 mm Milling/Boring head travel vertical ( Z-Axis) 210 mm Table size /Clamping area 500 x 1.570 resp. 390 x 1.280 mm Mounting height below spindle, approx. 140 / 690 mm Height adjustment of Milling head max. 540 mm Distance between spindle and column 450 mm Spindle tape ...

rotary table diameter: 1000 mm grinding height: 500 mm grinding head - power requirement: 15/5,5 kW total power requirement: 30 kW weight of the machine ca.: 18 t dimensions of the machine ca.: m S I E L E M A N N (Germany) Hydraulic Rotary Table Internal and Face Grinding Machine with two grinding heads and with horizontal workpiece clamping Model RFsB 100 Year 1969 / fully reconditioned by the manufacturer in 1990 _______________________________________________________ Max workpiece Ø 1,000 mm Max. height of workpiece, approx. 400 mm Mounting height under grinding spindles approx. 500 mm Grindable Bore Ø, approx. 50 – 900 mm Max. Workpiece weight approx.. 900 kg Distance between Table bore and column 1.150 mm Table Ø / Face plate Ø, approx.  ...

We offer you a new shelf for sale here. Particularities: - Height of the shelves can be individually adjusted - Floors can be hung at an angle (see picture material) - Castors for flexible warehousing - All castors equipped with parking brakes, thus enabling storage on inclined surfaces - Floor frame can be folded up, making room for a Euro pallet - Material surface: high-quality chrome-plated - Suitable for different industries - Easy and uncomplicated installation Technical data and further information: 01x shelf, new composed of: Total height: approx. 1,587 mm Total depth: approx. 855 mm Total width: approx. 1,310 mm Included in delivery are: 01x Floor frame, new Width: approx. 1,310 mm Depth: approx. 855 mm 01x rear wall, new incl. stabilization hooks 04x locking rollers, new incl. Allen key for installation 02x shelves, new Depth: approx. 3 ...

workpiece diameter: 250 mm centre distance: 0 mm honing length max.: mm max. module: 5 Gear Ø, min./max. 10 / 250 mm Module range 1 - 5 Length of teeth / max. table stroke 500 mm Height of centres of tailstocks 220 mm Max. weight of workpiece 50 / 100 kg Honing head swivelling +/- 35 ° Speeds of honing tool 20 - 500 rpm Size of honing tool, Ø x width 300 x 40 mm Workpiece speeds 500 - 3,000 rpm Total adjustment of cross slide 270 mm Rapid traverse of cross slide 50 mm Infeed travel of cross slide, mechanical 1 - 8 mm/Ø Roughing / finishing infeed 1 - 29 / 0.2 - 2.8 mm/sec Table speeds, hydraulic 0 - 6 m/min Total electrical load 5.5 kW - 380 V - 50 Hz Weight 3,200 kg Accessories / Special Features Working parameters can be preset using counters and control units. Automatic working process with workpiece counter. All roughing and finishing infeeds can be adjusted by a decade switch ...

Lock forming machine LFM Lock former machine LFM is the one that is most required beyond our customers. It is used for forming ventilation locks such as Pittsburgh lock, standing seam lock, single hem, double hem, locking pin, elbow radius element. Those locks are widely used when construction process of different industrial and civil buildings. The advantage of our lock former machine compared to others machine is possibility to form pipe lock so you can use it while round pipes production. So our customers can save money on purchasing additional equipment and renting additional production areas. There are 7 pairs of forming rolls on the LFM machine to form different ventilation locks. Forming rolls are tempered so they have long life period. The process of ventilation element production is started from Pittsburgh lock forming process and single hem forming process  ...

Double standing seam roofing machine F3 is used for making double standing seam lock for the roofing panels that are used for installation of the double standing seam roofing. The double standing seam roofing is widely used because it’s impossible for the water to get under the closed double standing roofing panels in the places of their contact with each other, thanks to lock’s special shape. The special shape means that double standing seam panels cover each other in the places of their contact, and after their installation on the roof it will be closed using special double standing seam closing tools (manual tool for closing double standing seam lock and electric machine for closing double standing seam lock). The advantage of this Standing seam machine is possibility to change the width of the standing seam roofing panels in very simple way. There’s a special screw at th ...

max. wheel diameter: 1600 mm gear width: 250 mm max. module: 20 min. module: 1,5 base circle dia. - max.: 1450 mm base circle dia. - min.: 150 mm specimen weight from/to: 4000 kg feeler adjustment movement - parallel: 1400 mm max.helical angle: 0 - 90 ° wheel diameter with counterstay: 1000 mm feeler adjustment movement - parallel: 800 mm centre height: 1150 mm electrics - voltage/frequency: 400 / 50 V/Hz dimensions of the machine ca.: 2,8 x 2,4 x 2,3 m total power requirement: 2 kW weight of the machine ca.: 3 t Universal Involute and Helix Testing Machine - modernized 1995 Machine is suitable for measuring all individual tooth data on straight and helical spur gears, and shaping and shaving cutters. Following tooth data can be tested: Tooth flanks, Involute base circle dia. and pressure angle, Profile c ...

max. wheel diameter: 215 mm gear width: 40,65 mm max. module: total power requirement: 20 kW weight of the machine ca.: 10 t Max. external Ø of workpiece 215 mm Tooth profile, height x width 16 x 40.65 mm No. of teeth 5 - 200 Max. tooth ratio 1 : 10 Grinding wheel Ø 51 - 190 mm Grinding wheel speeds 1,000 - 6,000 rpm X Axis (horizontal) 152 mm Y Axis (vertical) 178 mm Z Axis (slide base plate) 304 mm Distance from middle of machine to middle of workspindle 115 mm Axial speed 125 mm/sec Workpiece speeds 0 - 30 rpm Workspindle bore, conical 3 29/32 inch Total electrical load 20 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features FANUC CNC Control, Model 150 MB, for 7 axes, with monitor and direct input. Automatic calculation of all workpiece and grinding parameters. Extensive coolant equipment with filter system, band filter, etc. Driv ...

: 50 mm roll diameter: 150 mm revolutions per minute: 10 U/min adjustments: 120 mm total power requirement: 1,5 kW weight of the machine ca.: 430 kg dimensions of the machine ca.: 1,2 x 0,8 x 1,75 mm The PB 50-3 H is a hydraulic profile bending machine: we produce thisprofilebender in Europe and deliver it directly from our stock. This hydraulic profile bending machine has a shaft diameter of 50 mm and 3 driven rolls. It is easy to switch between working with two or three driven rolls via the gearshift on the side of the machine. Operation of the profile bender is done by a foot pedal and with the pedals you choose the turning direction of the rolls. Our PB 50-3 H has a handpump to adjust the position of the upper / centre roll with hydraulics. The position of this upper roll can be read out on a scale and on the digital display (0,1 mm). Furthermore, our Profi Bend machines can work in  ...

sheet width: 1050 mm plate thickness: 2,0 mm distance between columns: 1050 mm down holder: 1 Stück fence: Tisch 80 - 480 mm fence: Breiten 0 - 600 mm table-size: 1300 x 600 mm work height max.: 760 mm total power requirement: manuell kW weight of the machine ca.: 413 kg. range L-W-H: 2,0 x 1,04 x 1,6 m - Including adjustable stop on the work table for miter cuts - The knife can be lifted easily thanks to the counterweight on the back - Large work table for safe placement of the sheet metal plates - Sheets can be pushed through, i.e. longer sheets can be cut - Handwheel on the front to adjust the back gauge - Comes with a robust cast iron base as standard - Long service life thanks to knives made of quality steel - Standard with hold-down device including quick-release clamp - Robust machine construction for high stability Furnishing: - manual lever shears - stable execution - hold-down ...

ully automatic wood copy milling machine make REICHENBACHER type KS225Make -No: 1182, year of construction 10/1994 with Siemens OP 393 III controlSimultaneously mills and grinds two small parts with complicated shapes, such as tobacco pipes, golf club heads, sports pistol grips, wooden shift levers, etc.Technical specifications:machine constructionStable frame construction in a closed, against dust andNoise-encapsulated housing. Upper area of the front with gas pressure springHinged door, with security window.machine equipmentTo craft 2 copies of a model at once, you have:2 milling spindles each with a milling head dia. 240 mm (equipped with HS steels), via flat belts jointly driven by motor 2.2 kW; number of milling spindles 7200 rpm; Direction of rotation right.2 grinding units each with a 120 mm wide endless grinding belt, together with a 0.75 kW motor driven; belt speed 13 m/s; wi ...

Type: Treif Divider Type 2550 Slices are precisely stacked on top of each other even when the stacks are 100mm high The slicer can also be equipped with the automatic shaving function upon request The machine can also accommodate the off-set delivery of products such as cheese Compact and space-saving design ensures optimum utilization of space-saving High degree of flexibility: Product can be changed without mechanically changing the system Special solution: expanded chamber up to 220 mm to accommodate Italian Mortadella for example Dimension of the machine Length: 210 cm Width: 80 cm Height: 210 cm Electrical power: 4.8kW Delivery time: 30 working days after payment

diameter: 250 mm workpiece length: max. 150 mm connected load frequency: 230 V total power requirement: 0,2 kW weight of the machine ca.: 5 Kg dimensions: 0,25 x 0,25 x 0,4 m This drum is ideal for polishing, deburring and cleaning parts. Depending on the coarseness of the medium used, you can polish it fine. The bowl is made of a heavy polymer. The diameter of the bowl is about 25 cm. In this bowl can be filled about 8 kg of media. Suitable for parts up to approx. 15 cm in length. The drum is delivered without media. For example, you can use corundum, glass bead or ground walnut shell. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.