can used for sale

REF-61 SOMME 323 CAN SEAMER WITH 6 SEAMING HEADS Manufacturer: SOMME Model: 323 Can capacity: 1/2kg Can diameter: 73 mm In-line can infeed through screw conveyor Automatic lid feed Electric panel Voltage: 220/380V, three-phase

1 of used, combined canning and bottling line for beer or soft drinks, new 2016. Consists of the following equipment: - Semi-automatic, high-level, sweep-off, bulk can depalletizer, make COMAC. - Gravity can twist-rinser, make Eurosistemi, type GRV. This is a twin lane unit for 330- and 400/500-ml cans. - Can filler/seamer, make Comac, type Pegasus 8/1M. Output: 3,500 cph x 330ml (202/211 lid/body). - Vacuum Barrier Corporation liquid nitrogen dosing system for cans. - Level detector/rejector, make FT Systems. Checks for under- and overfills. - Assorted can and bottle conveyors. - VFDs for conveyor motors (control panel itself not available). - Self-adhesive labeller, make BRB, type MEGA ADE 622, 2 label stations (front/back wrap-around), rated at up to 4,000 cph / bph. - Semi-automatic carbonator/nitrogenator. Skid-mounted unit complete with stainless steel control panel, m ...

Packaging machine Beck Fitpacker Junior FJ 1040 U - Used equipment built in 1995 - small repairs necessary The Fitpacker Junior has a high packing performance and can process products of different lengths in disorder. A programmable logic controller is located at the top of the control cabinet and is easy to handle via a logical user interface. The packer also has a feeding system, which is especially suitable for line operation. Machine changeover times are kept short by a digital operating concept and an adjustable shape shoulder. The control cabinet can be opened and swivelled so that optimal access is guaranteed in the event of maintenance and downtimes are reduced. The film roll holder is mounted at an ergonomically reasonable working height. Working speed: Actual production speed and effective net output depend on format, Type and composition of products and can ...

Due to project abandonment, I offer here my Twin Heat wood chip heater, it is built in 2010 I bought the heater myself 3 years ago, disassembled, cleaned and replaced and reassembled defective parts It is mounted on a sturdy steel plate and can be moved with a forklift Originally, I wanted to use it as a hall heating system and install it in a shipping container There are a lot of new parts installed, such as valves, expansion vessels, bearings, rotary wheel blades, thermal drainage protection and a lot of small stuff You can either burn solid fuel or wood chips, but it has a huge combustion chamber The rotary valve is completely re-lined with sheet metal and welded and re-mounted The wood chip burner has been cleaned and resealed, extinguishing system has been provided with new hoses I had the system briefly test runs with water to test it, everything worked You can remove the  ...

GALLUS EM 510 S – 5 colour UV-FLEXO Machine information: The Gallus 510 S can be used to produce self-adhesive and monofoil labels as well as a wide range of other products. A state-of-the-art servo-driven web-feed system ensures optimum cost-effectiveness and superb quality results. Combined with the unique platform concept and the consistent modular design, these machines are a secure investment in your success – both now and in the future. Specifications:  Brand / type: GALLUS / 510S /Servo driven – like new  Age : 2008 – like new  Counter : Only 9.424 hour/runs  Webwidth : 510mm  5 x Flexo Units  5 x U-Dryer  BST Power Scope 300 (Web monitoring system)  Unwinder max.: 1250mm  Rewinder max.: 1250mm  Lamination/Cold foil  Turnable  Remailing 24"  Ben Bunch 500  Cross Cutting Cylinder  punching units (lengt ...

Water tanks & extinguishing water tanks USED & RECONDITIONED Muensterlandtanks.de Extinguishing water tank Extinguishing water tank Storage tank Cistern AHL ASL Diesel tank Heating oil tank Water tank Service water extinguishing tank Buffer buffer tank Extinguishing water tank Water tank A used steel tank in the size of 40,000 litres is offered. Volume: 40.000 Ltr. Material: Steel tank tank, material S235JRG2 Tank shape: cylindrical, horizontal, double-walled Diameter 2.50 m, length approx. 8.50 m Exits: Dom on the top Departures top Tank according to DIN 6608 or 6616 Condition: Tank cleaned from the inside and provided with a new bitumen coating from the outside. Suitable for above-ground and underground storage of water, process water, rainwater, feed etc. Location Ascheberg. Transport can be arranged cost-effectively. The loading of the container on trucks or  ...

Key data: 900 , 252 , 48

Our team are currently working on this 2008, BOY 90M injection moulding machine. It comes fitted with the Procan MD controller, 48mm plasticising unit with bi-metallic barrel and single core pull and two 16A sockets. It has only 35,000 recorded run hours. BOY 90 machines are some of the smallest (footprint) machines around for their clamp size. The design of the clamp unit on these machines means easy access for tool mounting and clear space below the clamp unit for conveyors etc. Very popular machines on the used market and support are readily available from various sources across Europe as there are a lot of these machines in operation. Come down and have a look yourself. Refurbished machines from STV Machinery undergo a comprehensive refurbishment procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault  ...

The PB.04N is a professional 4-spindle paper drilling machine with extensive standard equipment. The PB.04N paper drill offers variable speed, variable lifting speed, drill belt, drill cooling, drill lubrication, robust sliding table, spacers for quick and precise adjustment of the drill heads. This makes it possible to drill large print runs, plastic, art print or laminated paper. In tip mode, drill bits of different lengths can be brought to the same length without tools. The side and rear stop can be adjusted without tools. Using the snap-in hole pattern program bar, any individual hole patterns can be scaffolded with a flick of the wrist. Specifications up to 50mm stack height Speed control and stroke cycle control 3 - 14mm Paper Drill Bit up to 42mm hole distance to the blade edge 7 - 293mm hole spacing over sliding table Robust sliding table with hole pattern program strip  ...

The RF303 Electrosurgical Analyzer tests electrosurgical units (ESU) for generator output and high frequency (HF) leakage. It is compatible with both isolated and earth/ground-referenced types of electrosurgical units. You can test both the high-level monopolar and the low-level bipolar ESU outputs using this versatile Analyzer. RF303 Electrosurgical Analyzer Tests Electrosurgical Devices (ESR) Generator power and radio frequency (RF) leakage. It is compatible with both insulated and earth/ground types of electrosurgical equipment. You can test both the high-level monopolar and the bipolar Low-level ESU outputs using this versatile analyzer. Device can be shipped worldwide. The tester can be shipped worldwide.

Pallet wrapper ROTAX S3200 Electro-magnetic foil brake. In the standard version, the machine is used to protect palletized loading units of max. 1200 mm length, 1200 mm width with stretch film. The standard winding column is available for winding heights up to 2100 mm, on request, the winding height can be increased up to 3000 mm. The rotation speed is adjustable from 4 to 15 rpm The drive of the film carriage is also frequency-controlled and allows the up and down speed of the film carriage to be adjusted separately. The PLC control and additional control board offer ten winding programs, which can be estimated by password. Foil carriage protected by safety gear TECHNICAL CHARACTERISTICS ROTAX S3300 Driven pre-stretching system UP TO 300% In the standard version, the machine is used to protect palletized loading units of max. 1200 mm length, 1200 mm width with stretch f ...

Schäfer roller conveyor complete system Super bargain for self-dismantling in Neuss Logistics center with all conveyor belts, roller conveyors and spare parts. Over 3 floors Year of construction: 2008 The Schäfer roller conveyor system is a state-of-the-art conveyor system that has been specially developed for the efficient and precise movement of goods and products over several floors. With its robust design and intelligent control, the system offers a reliable and flexible solution for in-house transport in production facilities, logistics centers and warehouses. The roller conveyor system consists of a series of roller conveyors arranged horizontally and vertically to ensure seamless movement of goods between different levels. Through the use of individually adjustable rollers and different types of conveyor belts, the system can be adapted to the specific requirements o ...

Sliding table saw, table saw, circular saw, carpenter's circular saw, format saw WH machines Type: Z45 - 400E Professional New wide aluminium format slide 320 cm with carbide round bar guide system Width approx. 415 mm Boom table with extendable aluminium cut-to-length stop, incl. 2x folding stop Cut to length up to approx. 300cm Electric height adjustment of the saw blade Stable round bar guide of the sawing unit. Electric swivel of the saw blade up to 45 with digital display of the swivel angle precise swivel segment guidance of the sawing unit. Rip fence up to 125cm with fine adjustment Stable 50 mm round rod guide Parallelogram protection device with upper suction can be folded away for upright workpiece cuts. 2 different speeds adjustable (4000/ 600rpm) Saw blade diameter up to 400 mm Cutting height at 90°: 125 mm Scoring blade with 1 ...

Sliding table saw, table saw, circular saw, carpenter's circular saw, format saw WH machines Type: C45-300E Economy New wide aluminium format slide 320 cm with carbide round bar guide system Width approx. 380 mm Grid carriage locking system with operation at the end of the carriage. Boom table with extendable aluminium cut-to-length stop, incl. 2x folding stop Cut to length up to approx. 300cm Electric height adjustment of the saw blade Stable swivel guide of the sawing unit. Electric swivel of the saw blade up to 45 with digital display of the swivel angle precise swivel segment guidance of the sawing unit. Rip fence up to 125cm with fine adjustment stable 35 mm round rod guide Parallelogram protection device with upper suction can be folded away for upright workpiece cuts. 2 different speeds adjustable (4000/ 600rpm) Saw blade diameter up to 3 ...

IRB6600 Serie's upper arm extenders and different wrist modules will allow customization to each process. As the robot can bend fully backwards, the working range is greatly extended and the robot fits well into dense production lines. The IRB 6600 is ideal for process applications, regardless of industry. Typical areas can be Spot Welding, Material Handling and machine tending. Year: 2008 Reach in mm-2550 mm Payload-225 kg Cabinet: NOT Included (Works with IRC5 - we can try to find one for you) Teach Pendant: NOT included but we can try to find one for you Signalling & Power Cables: Included Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman.

The grinding block machine from Oskar Pensel & Sohn Jserlohn is a powerful tool for professional use in workshops and industrial companies. With a robust construction and high-quality components, it offers a reliable and precise grinding solution. This grinder machine is equipped with two grinding wheels that offer speeds of 1700 and 2200 revolutions per minute (rpm). Thanks to the two independent motors, each with 2.2 hp power, you can adjust the speed to your requirements and efficiently process a wide range of materials. The machine type 764M15B is characterized by its high stability and durability. It provides a solid base for precise grinding and allows you to have precise control over the grinding process. The grinding block machine is ideal for deburring, sharpening, polishing and forming various workpieces. For further details about the grinder block machine, please do n ...

Rung and slotted hole drilling machine T 140 with angle adjustment Special drilling machine for staircase construction, window construction. Oblique dowels and picket holes can be easily realized thanks to the rotatable drilling unit. Motor pole switchable, two speeds Motor power 1.4 / 1.8 kW, 1380 / 2810rpm Starting the engine with a practical handle switch Röhm two-jaw chuck up to 20mm capacity Linear laser for exact positioning of the workpiece Drilling unit can be rotated 63 degrees to the left and right The desired drilling height can be adjusted with a hand crank and digital counter Transverse adjustment approx. 320mm, infinitely variable Maximum height adjustment approx. 60mm above table height Drilling stroke approx. 140mm 2 pneumatic workpiece clamps Chassis Pressure rubbers renewed Few paint spots repaired Dimensions approx. 1180 x 1000 x 1250mm (LxWxH), ...

P311 - used approx. 110 m³ / 110,000 L GF-UP tank, standing on stand frame or horizontal, with chemical protective layer. Technical details: Capacity: approx. 110 m³ / 110,000 litres Material: glass fibre reinforced plastic, GF-UP Manafacture: Reich-Tank Year of construction: 2005 DIBT bauaufsichtl. Approval: Z-40-11-117 Specific gravity: min. 1.06 kg/L Dimensions: Ø approx. 3.00 m × H total approx. 19.05 m Other: Used tank made of glass fibre reinforced plastic / GF-UP, with inner chemical protective layer, professionally cleaned and in good condition. Standing, above-ground storage container on stand frame, incl. ladder and roof platform, dome on the side of the tank and on top of the roof, several inlets and outlets. Former silo for the storage of biogas and 9% sulphuric acid, including container statics and expert opinion to prove suitability according to §19 g/h WH ...

The slicer for cutting cakes. Adjustment of the piece size by means of sliding knives (grid system). The knife bars can be changed quickly. The machine can be used at different production sites, and the swivel castors make the machine mobile. The machine is easy to clean. The machine is visually and technically in good condition and can be viewed and tested in the warehouse in Bielefeld. We will be happy to send you further pictures and information on request. Krumbein Cake Slicer KSSM-0.1D suitable for trays 60x40 cm and 60x20cm Individual adjustment of the piece size Longitudinal and cross-section rotating knives with protective glass the cleaning of all soiled machine parts, can be done in the dishwasher changing the cutting plane is done manually the immersion of the knives in the cake as well as the cutting feed are carried out manually Machine weight 165 kg Specificati ...

Rieber MaxMo Cold Buffet Edition The Rieber MaxMo Kalt Bain Marie is a professional cooling system that has been specially developed for use in gastronomy and catering. This innovative device allows you to present a variety of cold dishes such as salads, desserts, cold cuts, seafood and much more at the optimal temperature and keep them fresh. The Kalt Bain Marie has precise temperature control that allows you to set the desired cooling temperature for each dish individually. Due to the constant cold, the food is stored safely and hygienically, which preserves the quality, taste and appearance of the dishes. The Rieber MaxMo Kalt Bain Marie is characterized by its high-quality workmanship and first-class materials that ensure efficient cooling. The appliance is energy-efficient and environmentally friendly, so you can optimize both the quality of your food and your operating co ...

Cutting height at 90Â: 170 mm; Cutting length: 430 mm; Mitre area horizontal: 45Â-90Â-25Â; Mitre range vertical: 60Â - 90Â - 30Â; Swivel adjustment with crank: yes; Roller conveyor / support table: no; Saw blade diameter: 420 mm; Speed: 2800rpm; Motor power: 3 kW; Engine brake: yes; Suction port: 100mm; Machine Length: Machine Width: Weight: 110kg; These two types of machines are used for cut to length, as well as for horizontal and vertical mitre cuts. Double mitres are also possible. The drive with saw blade runs in a guide arm bearing with 4 ball bushings, which can be swivelled on both sides up to 45Â for mitre cuts. For pointed mitres, the saw blade can be swivelled to the right under 45Â to approx. 25Â. In addition, the saw head can be tilted on one side to the left from 90Â to 45Â. Adjustable fixed stops for 90Â and 45Â. intermediate mitres according t ...

Vacuum lifters, vacuum lifters from Schmalz for heavy plates, sheets, etc. Load capacity 300kg horizontally and vertically Vacuum cleaner can be swivelled 90 degrees by motor 10 suction cups 370 x 85mm, suction cups partially removable Minimum dimensions of the suction cups: 1250 x 760mm Maximum size of the suction cups: 1900 x 1200mm Acoustic warning signal when the vacuum is too low 400V, 0,37kW Vacuum pump approx.8m³/h Pressure gauge to indicate negative pressure Can be attached to on-site chain hoist Swivelling and snap-in control lever, which means that parts can also be stacked very high With crane bottle holder CE mark No test book available Paint bursts reworked The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

The iCombi Pro is the latest combi steamer from RATIONAL. The iCombi Pro 20-1/1 Electric model with 20 shelves GN 1/1 New is easy to use, even for unskilled personnel, as you can achieve outstanding food quality without the need for supervision. The super-fast intermediate and self-cleaning keep your device squeaky clean. It is a young used combi steamer from 01/2023. The RRP is € 25,520 net Availability: available directly from stock in week 09/2024 The indicated price is gross incl. 19% VAT. Service: We would be happy to provide you with a certified Rational customer service from master craftsmen, within a radius of approx. 100 kilometres from our location (postal code: 35418) Are you looking for a specific type of Rational device? Ask us, we have access to an extensive range of used and new goods. We will be happy to advise you on all types of devices, whether S ...

Overview The filling line was manufactured in 2021 by the German company ALWID. The filling line is new and can fill  chemical products into plastic containers. With the exception of the bottle feeder and Posimat, glass bottles can also be processed. Due to ATEX certification, explosive products can be processed with the line. The equipment comes with a 2-year warranty (in single-shift operation) and all components of the equipment can be purchased separately.  Technical details Capacity: 9000 containers/h (varies according to bottle volume and product).  Container  Max. Diameter: 100mm  Max. Height: 300mm  Control Siemens S7 Single machines  Bottle Hopper | ALWID | POSIMAT-ACCESS-N15  Bottle feeder with hopper 2000 l, in stainless steel, chassis and supports in mild steel painted Positronic control system for optimal adaptation to downstream filler Machine, completely internally ...

Overview The CIP system from Diversey is used for stationary cleaning of filling machines and processing equipment in the beverage industry. This unit was developed between 2015 and 2017 and is now for sale as the customer quit the purchasing contract. Therefore it was not in use. It is properly stored and can be installed and implemented into an existing circuit by Diversey technicians. Furthermore there is the possibility to adapt the P&ID to the customers needs. The CIP unit itself has no operator panel, as it will be implemented as slave system into the controle of a filling machine or other machine to be cleaned. It can be connected to an  Allen Bradley control system. It is installed in a stainless steel base frame and has a 500l tank. There are four pumps for the dosing of cleaning and disinfection media. Furthermore there is a heat exchanger heated by steam. In addition th ...

110 meters of Schäfer shelves Freely configurable heavy-duty racking system from Schäfer Can be used in a variety of ways Shelf depth: 80 cm Shelf width: 128 cm Shelf height: 3.28 m This shelving system can be easily dismantled and assembled. The length of the alleys can be freely designed. It There are currently 6 floors per field. We would be happy to plan the new Use. Schäfer shelving systems impress with their their long durability and modularity. Scope of delivery: • over 110 meters, • 3.28 m high • 6 floors per field • 128 x 80 cm General conditions: The system can be dismantled by the buyer. become. Scheduling: The plant will be in operation until summer 2024, Viewings in the current Operations are possible. In late summer 2024, the Plant dismantled Location: Ahaus / Germany

Bench milling machine Wood milling machine Carpentry milling machine SCM Type: T120C 5 speeds adjustable 2900/4400/6600/7800/10 000 rpm Table dimensions approx. 110 x 90 cm Milling fence with fine adjustment Milling fence can be rotated on the machine table. max. tool diameter 325 mm incl. milling shaft 30 mm suitable feeders can be found in my other articles. Condition see pictures, or please refer to the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the expense of the buyer. Shipping costs are a guideline, depending on the distance and unloading option, they may vary.

Fully refurbished Hosokawa Alpine CW 250 used machine by Alpine Originals. The pin mill Hosokawa Alpine Contraplex CW fitted with two driven contrarotating discs. It is used to grind soft materials, even with high fat or humidity content. It allows also the processing of certain flexible materials or those that can´t lose their properties during comminution in cryogenic mode using liquid nitrogen (LN2) freezing them. This micronizer is perfect to pulverize different coarse products down to a finer powder and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetics, recycling, etc. This grinder can be used for the pre-cut of different materials. It is able to process coarse products up to approx. 3 Mohs´ hardness by reaching medium to fine particles with end-product fineness values between d97 40 to 500 micrometer (µm) t ...

Fully refurbished Hosokawa Alpine UPZ 160 Pharma used system by Alpine Originals. The Hosokawa Alpine Ultraplex UPZ is a universal fine impact mill. It is used to grind soft dry materials. This micronizer is perfect to pulverize different coarse products down to a finer powder and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetics, recycling, etc. This grinder can be used for the pre-cut of different materials. It is able to process coarse products up to approx. 3 Mohs´ hardness by reaching medium to fine particles with end-product fineness values between d97 150 to 850 microns (µm) top size (product dependent) at the lowest possible energy consumption. The turbo mill can reach this wide final product range thanks to a variety of easily interchangeable grinding tools such as pin disc, plate beater, beater disc or p ...

Fully refurbished Hosokawa Alpine UPZ 315 used machine by Alpine Originals. The Hosokawa Alpine Ultraplex UPZ is a universal fine impact mill. It is used to grind soft dry materials. This micronizer is perfect to pulverize different coarse products down to a finer powder and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetics, recycling, etc. This grinder can be used for the pre-cut of different materials. It is able to process coarse products up to approx. 3 Mohs´ hardness by reaching medium to fine particles with end-product fineness values between d97 150 to 850 microns (µm) top size (product dependent) at the lowest possible energy consumption. The turbo mill can reach this wide final product range thanks to a variety of easily interchangeable grinding tools such as pin disc, plate beater, beater disc or pendulu ...

This is an electric rectangular cooking kettle from the premium manufacturer Electrolux/Therma, type PBEN40EKEM (400 litres) from 2017. The appliance is suitable for cooking, steaming, poaching, stewing or simmering/simmering food. The boiler is equipped with a closed, non-refillable "electric steam heating system" (without replenishment from the water network). Heating is provided by an electric steam heater. Here the electrical energy is converted into steam, working pressure 1.5bar. The radiators are equipped with boil-dry protection. The heating capacity is divided into 4 heating levels with automatic transition from the boiling to the continuing cooking process by an energy-saving microprocessor control. Equipped with the therma touch control for permanent, easy-to-read display of target and actual values such as temperature, working time and power levels. This is a pedestal install ...

This is an electric round cooking kettle from the premium manufacturer Electrolux/Therma, type PBON15EKEM (150 litres) from 2017. The appliance is suitable for cooking, steaming, poaching, stewing or simmering/simmering food. The boiler is equipped with a closed, non-refillable "electric steam heating system" (without replenishment from the water network). Heating is provided by an electric steam heater. Here the electrical energy is converted into steam, working pressure 1.5bar. The radiators are equipped with boil-dry protection. The heating capacity is divided into 4 heating levels with automatic transition from the boiling to the continuing cooking process by an energy-saving microprocessor control. Equipped with the therma touch control for permanent, easy-to-read display of target and actual values such as temperature, working time and power levels. This is a pedestal installation ...

carrying capacity: 1000 kg number of suction cups: 8 suction cup dia.: 280 mm Vacuum lifter VH 8-1000 for the horizontal transport of smooth, dry and airtight panels. Robust supporting structure made of steel, painted in RAL 2000 with low Own weight. consisting of: - 1x galvanized longitudinal beam with a length of 2,400 mm - 4x galvanized crossbeams with a length of 1,000 mm - 8x Springy, articulated and adjustable suction cup holders - 8x suction cups Ø 280 mm, in case of wear the seal can be separated whose metal supports can be changed inexpensively and without tools - 8x ball valves to switch off individual suction cups, thus also smaller formats can be lifted without having to move suction cups or traverses. - 1x spiral connection cable small helix: with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling. is routed to the lifting device ne ...

carrying capacity: 250 kg number of suction cups: 6 suction cup dia.: 215 mm Vacuum lifter VH 6-250 for the horizontal transport of smooth, dry and airtight panels. Robust supporting structure made of steel, painted in RAL 2000 with low Own weight. consisting of: - 1x galvanized longitudinal beam with a length of 2,400 mm - 3x galvanized crossbeams with a length of 1,000 mm - 6x Springy, articulating and adjustable suction cup holders - 6x suction cups Ø 215 mm, the seal can be separated in case of wear whose metal supports can be changed inexpensively and without tools - 6x ball valves to switch off individual suction cups, thus also smaller formats can be lifted without having to move suction cups or traverses. - 1x spiral connection cable small helix: with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling. is routed to the lifting device nex ...

Portable CO2 Meter Haffmans i-DGM Intelligent - 2016 This Haffmans Portable CO2 Meter can be used for fast and accurate measuring of dissolved CO2 content in Beer and CSD. Measuring can be made directly in production or in laboratory purposes. Metering of CO2 beverages based on the internationally standardized method of Henry’s Law. Up to 10 different product types can be programmed into this device. Dissolved CO2 content can be transferred to PC with existing cable connection. Delivery includes Intelligent CO2 i-DGM device, protection bumper, service set with power supply, set of hoses and PC connecting cable. Technical characteristics Manufacturer Pentair Haffmans Manufacturing year 2016 Product model Portable i-DGM CO2 meter model OMG Varivent CO2 measuring range 2.0-10.0 g/litre CO2 accuracy +/- 0.05 g/litre Pressure range 0-10 bar(g) Weight 2.8 kg Certificati ...

Salvagnini S4+P4-2420 Plate Bending and Punching Machine Specifications: Maximum length x width of incoming sheet: 2420 mm Minimum length x width of incoming sheet: 436 x 130 mm Maximum diagonal of incoming sheet: 2220 mm Maximum bending height: 203 mm Maximum material thickness: 2.0 mm Minimum material thickness: 0.5 mm Charging: automatic/manual Load capacity 5000 kg The Salvagnini S4 + P4 system are flexible lines for the production of panels from sheet metal packages. The punching, shearing and bending process is integrated to eliminate material handling. The S4+P4 system can also be operated as separate work cells. The intrinsic flexibility of the individual S4 and P4 systems extends to the hole line. Efficient production: The production process from raw material to finished panel takes place on a single processing line. This offers concrete savings in terms of pro ...

Trotec Laser GS1000 Co2 Galvo 100 watts water-cooled • Top condition • 6 months warranty • Leasing and financing possible Original price approx. 150,000 euros net • Mechanical design: Closed housing with double safety system, laser safety class 2; CE compliant; software-controlled Z-axis, • Overall dimensions (W x D x H): 1000 x 1400 x 2200 mm • Weight: approx. 550 kg Profitable print products by digital laser punching More value for printed products: Achieve higher Margins with Laser Finishing Whether business cards, brochures, packaging or Labels – through the use of laser cutting or engraving make these products higher quality and can use them sell more expensive. With the engraving of logos, the individual Laser cutting of names as well as the most filigree ornaments differentiate yourself from the competition. New products With a lase ...

The Model 360C Automatic Large Wire Bonder is a high-speed wire bonder for 5 to 20 mil (125 to 500 micron) wires on a variety of semiconductor and hybrid devices. The bonding head, controlled by a micro stepper motor, performs all the movements of the bonder. The range of motion is 5 inches on the X axis and +3 inches on the Y axis, 2 inches along the Z axis, and up to 200° in rotation (theta axis). The Model 360C can automatically bond up to 1,500 two-wire bonding wires in any direction onto virtually any wire-bondable electronic package. Almost all functions are programmable: pattern recognition, loop heights, stepback lengths, bond heights, gram strength, and bond time and power. A Motorola 68030 microprocessor controls all machine functions. They communicate with the control computer via a keyboard, a control panel and a data monitor. Menu-driven software guides you through the crea ...

OBTAINING LIQUIDITY - LEASING / HIRE-PURCHASE POSSIBLE ASK FOR AN INDIVIDUAL NON-BINDING OFFER! LEASING POSSIBLE FROM 674,-€ This is a NEW blast chiller / blast freezer from the manufacturer Irinox, type MF 100.1. This is a device for blast cooling/blast freezing hot food or unprocessed foods. A sturdy stainless steel entry ramp for the trolley. The system is an exhibit of a trade fair, still unused. The external refrigeration unit UC100 is still in its original packaging and is new. The cell may show minimal signs of use due to transport. The RRP for the MF 100.1 including the refrigeration unit is: € 51,592 net. + VAT. IMMEDIATELY AVAILABLE FROM STOCK ! OUR USED EQUIPMENT SERVICE FOR YOU: - 12 months warranty by Irinox - High-quality branded devices at fair prices - Professional and competent advice - before and after the purchase - Shipment or self-collection ...

Code: 0218 Brand: BIESSE Model: ROVER 18 - CE Standard CNC working center with 3 controlled axis - CE Standard Technical data: Working range X axis mm 2310 mm - Y axis mm 710 - stroke Z axis mm 90 N ° 6 worktables Boring unit composed of n° 12 vertical spindles - n° 4 horizontal spindles - Motor power Hp 2,3 Router HSD Hp 5 - Max speed 24.000 rpm Bevel gearbox unit Vacuum pump 40 m3/hour Working pressure 6 bar Installed electric power 10 Kw Suction port diameter mm 200 Numerical control CNI NC481: Monitor 9 " Multiscreen: a special softkey is constantly enabled to allow the passage of the AUTOMATIC or MANUAL operating environment, to the PUBLISHING environment for writing and editing of the programs, while the machine works, all the programming operations , insertion and modification of tool data can be performed , total graphics, PLC debugging Programming: t ...

Sell a completely overhauled Pastomaster 120. It has been equipped with a robust new Siemens PLC control system and is therefore completely free and easy to adjust by the user. No more expensive electronic components from Carpigiani that can break. All times and temperatures can be adjusted individually. The most reliable robust industrial technology! Just fresh A/C service with current refrigerant R422D, new wheels, new seals. The lid is also a bit broken, but can also be replaced if desired. Of course, an invoice can also be issued.

Kopp B100 FF Folding Wrapping Machine Folding wrapping machine, also known as cellophanier, for all heat-sealable films, including recyclable or compostable films Fully automatic packaging machine for the medium output range. The longitudinal sealing seam is attached to the bottom of the product. The sides of the box are closed over the entire surface. Easy and extremely fast format changeovers thanks to quick-change format sets Clear control panel for setting all important machine functions Applications In all areas where cuboid products are used, the cellophane maker can be used BX100FF, including as a banding machine. For packaging tablet boxes in the pharmaceutical industry, in the tobacco industry as a case packer for the production of cigarette containers, as protective packaging in the food industry for coffee, tea, chocolates and confectionery or in the toy indu ...

Average output 800-1200 kg/h depending on materials and moisture DIAGONAL LOADING BELT Steel structure, side walls,PVC anti-slip belt,1,4 kw motor, Dimensions: 850×6000 mm. AGGLOMERATOR D1300 Steel barrel diameter 1300 mm. Main motor 250 kw (available with 300 kw motor on request) Replaceable inner steel lining Side door for inspection and blades replacement, Sucking vent for steam extraction Oleodynamic power station 0,75 kw with electrovalve which controls opening of unloading door.water loop cycle for cooling hub bearings belt. Electrical cabinet Dimensions: L mm.3950, W.mm.2.280, H. mm.4652. DISCHARGING HOPPER Diagonal, engine moved auger for material extraction (1,1 kw) Discharging height 830 mm from ground Depressure pipe inspection window safety inner grid Appx dimensions : 1000×1500 mm. Auger diam.180 mm. The line is offered reconditioned. Complete with electrical drawings and  ...

TWIN – CNC PUNCHING LINE EQUIPPED WITH 2 HORIZONTAL HEADS 22 TONS Punching machine “Twin” is equipped with feeders that move and place the tubes according to a punching program set on the programmer. Twin can punch either a row, or two rows of holes on the same tube at the same time, it is equipped with a rotary vice for round tubes, it can punch different rows of holes on the same tube. It has been supplied with two heads; this way, either square or rectangular tubes can be punched on all 4 sides in a single run in the machine, according to the tools installed, it can punch either one or two tubes at the same time. Excellent Condition.

The Milestone UltraWAVE microwave mineralizer is a unique device. Structurally and ideologically completely different from classic mineralizers with closed vessels. UltraWAVE works in SRC (Single Reactor Chamber) technology - a single reactor chamber. The said reactor is made of a thick stainless steel jacket, capable of maintaining extreme conditions inside: temperature up to 300 ° C and pressure up to 200 bar. This allows the full mineralization of the heaviest samples in an even shorter time. Inside the chamber, we can place several types of vessels (Teflon, glass, quartz) in a 22-position holder. The dishes are immersed in water. Thanks to this, we have an absolute guarantee that all samples are in the same conditions. The individual vessels (test tubes) are not closed or screwed, only the lid is put on, which greatly facilitates and speeds up the entire process and significantly  ...

: neu : 2023 : 5543 : prompt, Zwischenverkauf v : Niederlande : 3660 € : 1 : 100 x 2.000 mm : 20 - 76,1 mm : 1 : 3 kW : 190 kg The lever operated AL100U-01 can grind material from Ø 20 mm to Ø 76.1 mm. Its compound slide and carriage with rotatable clamp are continually adjustable allowing the machine to grind all pipe sections at any angle between 30° and 90°. The ALMI AL100U-01 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system simplifies tensioning the grinding belt. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are equipped with a deburring table. Incl. 5 pcs. grinding belts, 1 pce. grinding roll Ø. 42,4 mm The  ...

Serial Number: 90546 Weight: 2,2 tons Power: 6 kW Air pressure: 7 Bar Length x width x height in mm: 4400 x 3300 x 3500 Working height: 83 cm. Max. glass size: 3300 x 2550 mm Condition machine : Good Control type: Osai-S10 Electric. Connection: 3 x 400v Documentation: Can be requested from Lisec Instructions: Can be requested from Lisec Electric diagram: Can be requested from Lisec Parts list: Can be requested from Lisec Available software: Yes Photos/film available: Photo's and video available Remaining: Light screen is missing

Awaiting refurbishment by our team at STV Machinery in Wellingborough, Northamptonshire is this 2002, BOY 90M injection moulding machine. It comes fitted with the Procan MD controller and 36mm plasticising unit. BOY 90 machines are some of the smallest (footprint) machines around for their clamp size. The design of the clamp unit on these machines means easy access for tool mounting and clear space below the clamp unit for conveyors etc. Very popular machines on the used market and support are readily available from various sources across Europe as there are a lot of these machines in operation. Come down and have a look yourself. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free op ...

WMA WMP 08 One-Handed Bumper Air-cooled single-lever butt system for vehicle construction, tank construction, steel cabinet construction, sheet metal processing and wire industry - problem-free welding of all sheet metal - Galvanized sheets can be welded flawlessly by controlled current increase and current reduction - Air-cooled, equipped for external water cooling - Tools are easy to change thanks to standardised rotary connections - Only one plug each for welding power line, control cable and water cooling - Reproducible welding results at any time thanks to built-in, automatic energy control Microprocessor Thyristor Control - Constant current control - Seamless process monitoring - Easy and pleasant to use - All set parameters and process variables can be read at a glance - Changes to welding parameters only for authorized personnel - Management of configuration a ...

Frame dowel and slotted hole drilling machine from Hofmann HT 200 U with angle adjustment and speed control Special drilling machine for staircase construction, window construction and universal use by pneumatic height adjustment. Inclined doweling and stake drilling are easy to implement thanks to the rotatable drilling unit. Frequency-controlled motor with frequency converter, speed adjustment via potentiometer Motor power 1.5 kW Start of the engine with practical handle switch Precision chuck with two inserts 13 + 16mm Additional Röhm two-jaw chuck up to 20mm intake Preparation for drill heads Table size approx. 1100 x 240mm Linear laser for exact positioning of the workpiece Drilling unit can be rotated by 65 degrees to the left and right Pneumatic adjustment of the machining height, dowels on two levels without repositioning The desired drilling heights can be set fo ...

Better Pack 755eM High Speed Tape Dispenser The Better Pack 755eM is an electric water-activated tape dispenser (also known as a paper tape dispenser, gummed or water-activated tape dispenser) designed for a fast-paced packaging environment where heavy items are shipped in random size. This dispenser features an easy-to-use, easy-to-use, color-coded keyboard with 20 preset tape lengths and can handle tape up to 4 inches wide. Specifications The BP755eM model is a high-speed tape dispenser that can accommodate tape widths from 1 to 4 inches. It can hold up to 600 feet of tape with a roll up to 7.5 inches in diameter and dispense up to 32 tapes per second. The dispenser has a water bottle capacity of 2 liters and requires a power supply of 220 volts, 50 Hz and 2 amps. More items - new and used - can be found in our shop! International shipping costs on request!.