can used for sale

Key data: 1360 mm, 1 , 150 mm

Wide belt sander belt sander veneer sander OTT Type: ALPHA 136 one belt combi unit - Calibration loops via roller - Fine grinding with rigid sanding pad - Veneer grinding with insert-controlled air shoe Sanding width up to approx. 135 cm Passage height approx. 3 - 150 mm Cleaning brush at the outlet Motor power 11 KW Total power approx. 13.3 KW Belt speed 18m/sec Feed rate max. approx. .8m/min Dimensions approx. 2.06 x 2.0 x 2.1 m Weight approx. 2600 Kg The machine originates from the age-related abandonment of a small construction and cabinetmaking workshop and is available now. Dismantling and loading can be organized by us. Settlement by appointment. Buyers can also pick up and test the machine themselves on site. Condition see pictures, or please refer to the item description. Parts can also be picked up by yourself. All measuremen ...

Key data: 2 mm, 50 mm

Edge banding machine Edge banding machine OTT Type: 20S Edge banding with hot melt glue glue basin Plastic edges up to 2 mm Solid wood edging up to 20 mm Flush milling units at the top and bottom Profile milling units at the top and bottom Edge grinding unit rollable The machine originates from the age-related abandonment of a small construction and cabinetmaking workshop and is available now. Dismantling and loading can be organized by us. Settlement by appointment. Buyers can also pick up and test the machine themselves on site. Condition see pictures, or please refer to the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the expense of the buyer. Shipping c ...

Used isobaric filler Machine Bertolaso 11000 bph year of the remark of isobaric filler 2021 suitable for bottling sparkling and semi sparkling wines entrance on the left completely overhauled isobaric filler in all its parts with original Bertolaso spare parts documentable bottle sizes 85 88 90 112 6 sets of channels with isobaric filler to make the levels the electrical panel of the Used Isobaric Filling Machine according to CE standards use and maintenance manual spare parts manual available for this isobaric filler the production speed of isobaric filler is 9000 BPH with the sparkling wine the production speed is 7000 BPH with spumante This isobaric filler is immediately available and delivered in case of purchase We can assist the buyer in each step of the commissioning and testing operation of the Used Isobaric Filling Machine How to build one isobaric triblock The isobaric filler c ...

Labeling machine for sale with optical centering system Labeling Machine with Optical Centering System Available for Purchase For sale is used adhesive labeling machine boasting an advanced optical centering system This apparatus is fitted with 8 motorized plates each complemented with a dedicated photocell for precise optical alignment It incorporates three adhesive assemblies spanning 40 MT and an intricate 4 axis adjustment mechanism mounted on a trolley In addition there s a supplementary adhesive unit with 6 divisions tailored for L shaped sealing also on a trolley Notably the L seal tools can be adjusted to cater to U seal applications on bottle caps Technical Details for PE Labelers The PE labeling machine is equipped with a touchscreen interface complemented by an integrated PLC and modern electronics all of which can be tailored to specific needs Features include an electric lif ...

Used Kosme Labeling Machine Extra Fix 2000 Manufacturer Krones Model Extra Fix 12 T S2E2 Adm 00 Year 2000 Speed 8500 BPH Formats processed 5 Safeguards Yes Operating state Disassembled Number of plates 12 Plate handling Electronics Rotation direction Counterclockwise Number of stations 3 Labeling method Self adhesive Label position 2 Centering system Photoelectronics Head adjustment Manual Spare parts Not available Description The Kosme Extra Fix 2000 used labeling machine is a top quality machine that ensures the highest precision in applying labels to bottles and containers of various sizes Due to its versatility this machine can be used in different sectors such as food pharmaceutical cosmetic and chemical Among the main features of this Kosme used labeling machine we find the presence of two independent labeling heads allowing up to four labels to be applied simultaneously In additio ...

Used Complete Bottling Line for wine immediately available for sale This used bottling line is made up of used equipment that can work mainly with still wine The used Used Complete Bottling line has an isobaric monoblock that allows you to work both slightly sparkling and sparkling wines Currently it is used for wines without gas but also for some production with sparkling wine The cap in this case is a classic aluminium screw The used Complete Bottling Line wine filling is completely automatic from the depalletizer to the palletizer The packing of the used line is made with three separate machines that form box and close the American carton The operators currently used on the used Complete Bottling Line are 3 plus a quarter for the forklift during loading and unloading Some used equipment is also delivered to the used bottling line for wine These are for the standard 0 75 CL Bordeaux To ...

Used PET Complete Bottling Line for Water Description of the Used PET Complete Bottling Line for Water revised in 2018 This Water bottling line can work with both PET and glass containers In this configuration we only have the complete PET line but we have the filling triblock that can work with both plastics and glass therefore in the future if you want to make glass work too just introduce some machinery and you can also make this type of production in this Water bottling line The Water bottling line can process both still non carbonated and carbonated water Therefore if shortly the owner decides to also produce carbonated water just introduce a saturator and it will be possible to start producing water with gas as well in this Water bottling line How this line is composed Used PET Complete Bottling Line for Water 1 SIPA blower 8 linear cavities complete with nr 2 molds lt 1 5 and 0 50 ...

Key data: 1000 kN, 127 g/PS, 35 mm

Regularly maintained machine that is always kept in top condition. The screw rotation is done with an electric servo motor, which is an energy-efficient solution. The rest of the machine is identical to the standard version of the 420 S. The presence of the core puller in this type is extra. Another special feature is that the injection molding unit can be moved from the center. Software and technologies can be read from a CF floppy disk. The display can be done in both Hungarian and German. Manuals can also be in German or Hungarian. Currently, the machine has a 35 auger for technical materials in good condition. A video of the operation of the machine has also been created, which can also be tried out in person at our site. Please see our other ads.

New Semi Automatic Isobaric Can Filler 2022 SEMIAUTOMATIC CAN SEALING MACHINE MOD CEM CAN Machine composed by 2 or 4 isobaric filling valves 1 sealing head Machine frame in AISI 304 stainless steel Beer tank in AISI 304 stainless steel Beer connectors and pneumatic line in AISI 304 stainless steel Emergency stop Two hand switch control for operator protection during the work phases Suitable for filling 330ml and 500ml aluminum cans with the same diameter Machine features The equipment is made of high quality stainless steel 304 it is durable safe and reliable to use compact in design easy to operate The filling process is automatically controlled by PLC This machine is mainly composed of frame electrical control system tray filling valve beer storage tank cap turning machine etc Process of work Cylinder compression gas replacement the CO2 valve and pressure relief valve are opened at the ...

Tracked multi-saw SCM M3 No. 4 - Italian production - year of production 2000 - DTR TECHNICAL SPECIFICATIONS: track width 300 mm cutting height 120 mm engine power 25 kW max. blade diameter 350 mm max. workpiece width 1000 mm min. workpiece length 400 mm adjustable feed on the inverter pneumatically adjustable ruler on the right revolver ruler setting of 6 types three rows of anti-recoil pawls possibility of putting on a board - a shoe spindle diameter 50 mm sleeve diameter 70 mm the sleeve is equipped with spacers automatic central lubrication four upper pressure shafts spigot diameter 180 mm and 120 mm dimensions of the machine (length / width / height) 210/175/160 cm weight 1800 kg Multirip saws are machines used in the wood industry mainly for cutting piles, but not only. Machines of this type can cut boards into smaller elements and cut lamellas. The  ...

Cosmec SM 400 multi-saw - after the technical review - very good condition - Italian production - year of production 1993 cutting width 400 mm cutting height 160 mm engine power 37 kW smoothly adjustable feed speed spindle diameter 55 mm sleeve diameter 70 mm four rows of anti-recoil pawls the three upper pressure rollers table width 710 mm minimum element length 700 mm shaft height adjustment guide ruler laser central lubrication spigot diameter 200 mm dimensions of the machine (length / width / height) 220/190/180 cm weight 1800 kg Multirip saws are machines used in the wood industry mainly for cutting piles, but not only. Machines of this type can cut boards into smaller elements and cut lamellas. The principle of their operation is very simple, the machine has a spindle located in a central point on the horizontal axis, on which tools in the form of discs  ...

Raimann KD31 340/200 double shaft multi-saw blade - German production - year of production 1988 cutting width 340 mm cutting height 200 mm material width max. 800 mm engine power 2 x 55 kW feed speed smoothly regulated on the inverter disc diameter max. 350 mm lower shaft 400 mm upper shaft spindle diameter 65 mm sleeve diameter 80 mm four rows of pawls four upper pressure rollers electric height adjustment the ability to work independently with each spindle ruler central lubrication caterpillar with nails table top height from the base 930 mm spigot diameter 200 mm transport dimensions (length / width / height) 320/200/240 cm weight ~ 5000 kg Multirip saws are machines used in the wood industry mainly for cutting piles, but not only. Machines of this type can cut boards into smaller elements and cut lamellas. The principle of their operation is very simple, t ...

Raimann KD31 double shaft multi-saw - German production - year of production 1988 cutting width 340 mm cutting height 200 mm material width max. 800 mm engine power 2 x 55 kW feed speed smoothly regulated on the inverter disc diameter max. 350 mm lower shaft 400 mm upper shaft spindle diameter 65 mm sleeve diameter 80 mm four rows of pawls four upper pressure rollers electric height adjustment the ability to work independently with each spindle ruler central lubrication caterpillar with nails table top height from the base 930 mm spigot diameter 200 mm transport dimensions (length / width / height) 320/200/240 cm weight ~ 5000 kg Multirip saws are machines used in the wood industry mainly for cutting piles, but not only. Machines of this type can cut boards into smaller elements and cut lamellas. The principle of their operation is very simple, the machine has ...

track width 440 mm cutting height 55 mm - 200 mm disc diameter 320 mm 2 x 75 kW main engines 3 kW feed motor feed speed adjustable on the inverter up to 60 m / min the top five pinch rollers lower auxiliary roller five rows of pawls electric cutting height adjustment electric shaft height adjustment automatic central lubrication rollers diameter 60 mm, wedge 18 mm sleeve diameter 80 mm wedge 13 mm sleeve length 440 mm spigot diameter 200 mm transport dimensions (length / width / height) 280/245/230 cm weight 5120 kg Multirip saws are machines used in the wood industry mainly for cutting piles, but not only. Machines of this type can cut boards into smaller elements and cut lamellas. The principle of their operation is very simple, the machine has a spindle located in a central point on the horizontal axis, on which tools in the form of discs are installed. Depend ...

Multisaw Edger FOD DPPA-II-50-E with lasers – production in Poland – DTR – fixed sleeve - cutting height 120 mm - cutting width 500 mm - engine power 30 kW - material width max 730 mm - four types of feed speed - power of the feed motor 4 kW - spindle diameter 55 mm - sleeve diameter 90 mm - electric disc spacing adjustment - fixed edging sleeve 60 mm - one movable shield - two rows of anti-recoil pawls - three lower pulling rollers - two upper pulling rollers - two lasers - shaft support Transport dimensions: 250x165x220 cm weight ~ 2000 kg Multisaws are machines used in the wood industry mainly for cutting prisms, but not only. Machines of this type can cut boards into smaller elements and cut lamellas. The principle of their operation is very simple, the machine has a spindle located in the central point, in the horizontal axis, on which tools in t ...

Double shaft multisaw TOS SVITAVY PWR 402 440/200 – year of manufacture 2005 – technical documentation – Czech production track width 440 mm cutting height 55 mm - 200 mm disc diameter 350 mm main engines 2 x 55 kW feed motor 3 kW feed speed adjustable on a gear motor five upper pressure rollers lower auxiliary roller five rows of pawls electric cutting height adjustment electric shaft height adjustment automatic central lubrication shaft diameter 60 mm wedge 18 mm sleeve diameter 80 mm wedge 13 mm sleeve length 43 cm spigot diameter 200 mm transport dimensions (length / width / height) 280 / 245 / 230 cm weight 4770 kg Multisaws are machines used in the wood industry mainly for cutting prisms, but not only. Machines of this type can cut boards into smaller elements and cut lamellas. The principle of their operation is very simple, the machine has a spindle ...

With this rotator, the workpiece can be fixed and rotated in the correct position without a crane. By using the traditional positioning can be replaced. Occupational safety and treatment are optimized and cycle times are reduced. In the best case, the time requirement can be reduced by up to 20%! Includes wired remote control and foot pedal. The device has a master-slave function, which allows several driven units to be synchronized with each other. This can be important if later the capacity should be increased. When not in use, you can simply put the device in the corner and save space. The device is easy to transport to external workstations.

With EdmoLift leveling posts, items can effortlessly be raised to a working height of 1,100 mm. The level lift offers leg and foot clearance on three sides, ensuring smooth operation thanks to its excellent accessibility. In addition, with our dolly accessory, the leveling lift becomes mobile and thus offers two extremely practical advantages: Firstly, it can be easily moved during cleaning and cleaning. Second, it can serve multiple jobs, making your investment even more worthwhile. Pallets or containers are placed with the hand pallet truck or forklift directly on the leveling lift. The TSL models have a minimum height of 70 mm, with the TSE models, this is only 10 mm. Type TSLN leveling feet are equipped with a stepless inclination function and can be tilted by 40 ° to the left or to the right. This is a considerable reduction in workload, as it opens up an ergonomic window that help ...

Labeller suitable for all types of cylindrical products, can be used for glass, sheet metal, paper and plastic surfaces, partial and wrap-around labels, large adjustment range without format parts Year of construction 2011 Technical data: - max. can diameter 300 mm - max. can height 300 mm - min. can diameter 35 mm - min. can height 35 mm - min. label length 90 mm - max. label length 600 mm - max. label height 270 mm - Heating power 600 W - Motor power 180 W / 220 V - Output depending on product size 900 packs / hour

Clampable cutter head type (max.): 460 mm Cutter head weight (max.): 150 kg Mounting disc diameter for cutter heads (Ø): 360 mm Mounting cone for cutter heads Nominal diameter: Ø 58,227 mm travel -z axis: 200 mm diagram-drawing enlargement: ±10 - ± 500 µm weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC- ...

OPTICAL SORTING UNIT, To sort different colors of PET HDPE PP PVC PC ABS PMMA and more, Customizable from 1 to 6 channels, High precision and smart technology which uses A.I.to grant excellent performances., The best cost-effective deal you can find to improve your final product or create a new business., Very quick assistance if needed, Compact and versatile machine, available from 0,940 .up to 2,7 mt. wide (L x H: 1,8 x 1,8 mt.), For a variety of different uses, this machine can separate parts as small as a salt grain and as large as a walnut so increasing the value of your reground plastic scraps ., The control panel with its touch screen allows full customisation on different materials and colors., The 16 million colors high resolution digital cameras gives extremely high performances and can recognize down to 0,09 mm.large defects., The NIR cameras allow to detect stone, glass, soil ...

Working width: 4500 mm Working height: 3000 mm Number of cylinders: 6 St. Dimensions (L/W/H): 5600x1350x3550 mm Weight: 3000 kg S&S frame press Bavaria 2000 L --------------------------------- With automatic pressing cycle + manual control for corner connections tenon+slots and dowel connection/caulked tenon, Can be changed via selector switch on the control cabinet. With basic equipment for optional use of counter profiles if the sash is on loose part can be folded over. CE version Basic machine in the strongest welded frame construction, with thick-walled special hollow profiles. Guideways of the pressure beams for the press corners in a low-abrasion machined version. Fast, smooth, manual width adjustment thanks to ball bearing carriage, fixation in 50 mm Hole grid, optional motorized width adjustment with with hydraulic clamping (for an additional charge). Height adjustment and pressi ...

Description: Application: The MTM FKA system has been specially developed for small and medium-sized industries for partial cleaning. Design: The cleaning steps washing, rinsing, drying take place in one cleaning chamber. For serial parts, complicated single workpieces on product carriers as well as bulk material in commercial baskets, a multi-stage spraying and dipping process as well as a combined cleaning process with subsequent drying in an air circulation process can be realized in the cleaning system. Here, the cleaning effect, as well as the drying, is supported by rotating or swiveling the fabric basket within the degreasing system. Possible process technologies: - Cleaning - Degreasing - Phosphating - Steam cleaning - Flood injection washing - Spray rinsing - DI water rinsing - Hot air drying and vacuum drying. Process: The wash ware is fed to the cleaning system at the front ...

Bread slicer, make WABAMA, Model ECONOMY Plus 450, year 2009, Cutting capacity: up to 200 cuts/min, cutting thickness: 4 - 26 mm,, for bread lengths up to max. 450 mm, cross-section: 200 x 150 mm (WxH), Sensor – technology for measuring the panes,, Product holder (multi-tooth gripper), dimensions: 1,130 x 740 x 1,200 mm, use: The machine is versatile and is usually used for the automatic cutting of all soft and hard breads such as: tea and toast breads, multigrain breads, hard-crust double baked breads as well as Christmas stollen and English fruit cake. A fresh bread - cut is usually already possible when warm. Due to the low-noise and vibration-free operation, the machine is ideal for installation in shop fittings., construction/ function: The WABÄMA bread slicer has an extremely stable and resilient construction completely in V2A Nirosta stainless steel. The machine is equipped wit ...

Pneumatic can opener, make Edlund, type 625 M, powerful compressed air operated lid punch, (crown punch),, self-sufficient can opener for industrial use,, Output: approx. 2,000 cans per day, Characteristics:, completely made of stainless steel, for thorough cleaning can be hosed down from top to bottom, IP 65,, Suitable for opening cans of almost any size thanks to the height adjustability, Two - hand - operation, Compressed air requirement: 56.6 l / min at 6 bar,, format range:, minimum box height: 40 mm,, max. box height: 300 mm,, max. can diameter: 230 mm,, Info:, - Existing punching crown for can diameter 153 mm, - Additional punching crown optional, - With magnetic lid remover

Pneumatic can opener, make Edlund, type 625 M, powerful compressed air operated lid punch, (crown punch),, self-sufficient can opener for industrial use,, Output: approx. 2,000 cans per day, Characteristics:, completely made of stainless steel, for thorough cleaning can be hosed down from top to bottom, IP 65,, Suitable for opening cans of almost any size thanks to the height adjustability, Two - hand - operation, Compressed air requirement: 56.6 l / min at 6 bar,, format range:, minimum box height: 40 mm,, max. box height: 300 mm,, max. can diameter: 230 mm,, Info:, - Existing punch crown for can diameter 153 mm, - Additional punching crown optional, - With magnetic lid remover

1 piece dosing filler type K 12”, - without control cabinet, for filling thin or viscous products into glasses., Glass size: 28 g glass Ø 44.5 x 51.4 mm height TO 43, Product: fruit spreads, jams, ketchup, mustard etc., Product pieces: up to 10 x 10 x 10 mm, Filling temperature: up to approx. 85°C, Dosage range: 25 to 250 ml, Performance: depends on product and glass size, up to approx. 120 fillings / min., Product tank: 120 liter capacity instead of 45 liters, The dosing filler is specially designed for filling thin and thick liquid as well as pasty products, suitable. It can be a partial dosage or a full filling in cans, jars and, bottles., Depending on the product, the filler can be used for cold or hot filling., The system is constructed in a completely rust-free design. The dosing filler does not have its own, Belt body and can therefore be attached to an existing conveyor belt. ...

Used Filler KHS and Angelus 121L Seamer for cans up to 72000 cph Introduction to the Filler KHS and Angelus 121L Seamer In the dynamic landscape of beverage packaging the demand for efficient and reliable canning solutions is paramount Consequently enter the Rebuilt KHS Can Filler paired with the Angelus 121L Seamer a formidable duo tailored for high speed operations Originally manufactured in 1990 filler and 1993 seamer this system underwent a comprehensive rebuild in 2019 ensuring peak performance and longevity Exceptional Capabilities Designed to cater to the stringent requirements of the industry this powerhouse combination of the Filler KHS and Angelus 121L Seamer boasts exceptional capabilities With 94 filling valves and 12 seaming heads it delivers unparalleled efficiency accommodating cans up to 72000 pieces per hour Notably ideal for 202 204 x 602 0 35L formats it excels in hand ...

CNC – controlled profile and tube bending machine for demanding and precise bending work with hollow sections and tubes. With our machines, aluminium – steel / stainless steel – various plastics such as PVC window profiles (depending on the application) can be bent with repeatable accuracy, regardless of the material. Depending on the equipment, our machines can also be used for three-dimensional bending work. Our REPANDUS models can work both horizontally and vertically. The models of the REPANDUS series work with a fixed upper roller and two movable lower rollers – this means that the straight end piece is relatively short compared to machine concepts with fixed lower rollers. The machine body is made of vibration-absorbing cast steel Shaft diameter of upper and lower rollers Ø 70 mm Shafts made of special steel – hardened and ground Bending force 190 kN Maximu ...

CNC – controlled profile and tube bending machine for demanding and precise bending work with hollow sections and tubes. With our machines, aluminium – steel / stainless steel – various plastics such as PVC window profiles (depending on the application) can be bent with repeatable accuracy, regardless of the material. Depending on the equipment, our machines can also be used for three-dimensional bending work. Our REPANDUS models can work both horizontally and vertically. The models of the REPANDUS series work with a fixed upper roller and two movable lower rollers – this means that the straight end piece is relatively short compared to machine concepts with fixed lower rollers. The machine body is made of vibration-absorbing cast steel Shaft diameter of upper and lower rollers Ø 70 mm Shafts made of special steel – hardened and ground Bending force 190 kN Maximu ...

Fully Automatic Stretch Film Packaging Machine with Scale & Labeler Packing Plant / Wrapper + Labeler Fabbri Group ELIXA 35 / Libra-B.285.ESP Among Elixa automatic stretch wrapping machines, the Elixa 35 is the most powerful model in terms of speed (35 ppm). Like all the machines in the range, the Elixa 35 is a compact stretch packaging machine designed by the Fabbri Group specifically for particularly small workspaces and retail outlets. Elixa 35 can package any food that is compatible with stretch film and technology. Neutral or printed films with continuous printing are used, which offer more possibilities for communication and branding on the package. It delivers the best results when combined with Fabbri Group stretch films, but also offers excellent performance with food films from all major manufacturers on the market, achieving unparalleled packaging aesthetics.  ...

turning diameter:630 mm turning length:2850 mm control:Fanuc 0i-mate MGI swing diameter over slide rest:350 mm bed width:550 mm spindle nose:D11/1:20 spindle bore:104 mm spindle speeds::17-1000 U/min transmission ratio:autom. 4-stufig rapid power traverse in X-and Z direction:4/8 m/min tailstock quill taper MT:5 Morse Quill travel:200 mm diameter of quill:100 mm workpiece accuracy:6-7 ITF x-travel:320 mm z travel:3000 mm chuck size:315 mm dimensions:5200 x 1900 x 1900 mm :6 t power capacity:11 kW CNC controller:FANUC 0i mate TC 3 jaw chuck Ø:315 steady rest:2 Stück frequency control main spindel engine:11 kW turret:8-fach Flat Bed CNC Lathe Flat Bed CNC Lathe, CAK63/80 Series CAK 63/80 series CNC lathes integrate proven structure, stable functionality, and reliable quality to make an economical, practical, universal machine. They are widely used in such industries as automotive, petr ...

throat:580 mm bore stroke:650 mm X-axis :3300 mm y-axis:550 mm z-axis:650 mm Drill head RPM:bis 3800 U/min Drive x + y + z axis:Servomotor Rapid traverse x axis:20 m/min Rapid traverse y axis:10 m/min Rapid traverse z axis:10 m/min Distance table top - bottom Chuck:700 mm Table width:560 mm T-slots:14 Threaded drill up to:M4-M20 Tolerance x axis::0,1 mm Tolerance of y and z axis::0,06 mm total power requirement:4 kW weight of the machine ca.:ca. 4 t description of the Company Bauer: Drilling rig driving stand principle the table stops, the drill head moves. Simple operation, CNC knowledge is not required. Data import DXF and CSV. Robust design with proven engineering components and a clearer structure of the machine guarantee high availability and long service life. All this for a price which paid off faster than expected. In the development of the control system, special attention was g ...

Professional automatic packaging system from a renowned European manufacturer consisting of two components, each with separate controls. The machines can therefore be operated together or individually. Suitable, for example, for packaging foodstuffs, technical articles, printing and paper products, household goods, toys and textiles. Automatic angle welder Smipack FP 560: -Automatic welding frame movement. -Automatic residual foil winding. -Automatic product ejection through the outfeed conveyor. -Start the process manually via hand button or foot switch. Alternatively, automatic process start is possible by entering a time interval on the display. -Conveyor belt infinitely adjustable in height via hand crank. -Welded frame approx. 580 x 420 mm. -Welded frame movement electromotive. -Water-cooled welding unit (closed system). -Maximum film roll diameter 300 mm. -Maximum film ...

Professional automatic packaging system from a renowned European manufacturer consisting of two components, each with separate controls. The machines can therefore be operated together or individually. Suitable, for example, for packaging foodstuffs, technical articles, printing and paper products, household goods, toys and textiles. Automatic angle welder Smipack FP 560 A: -Automatic welding frame movement. -Automatic residual foil winding. -Automatic product ejection through the outfeed conveyor. -Start the process manually via hand button or foot switch. Alternatively, automatic process start is possible by entering a time interval on the display. -Conveyor belt infinitely adjustable in height via hand crank. -Welded frame approx. 580 x 420 mm. -Welded frame movement electromotive. -Water-cooled welding unit (closed system). -Maximum film roll diameter 300 mm. -Maximum fi ...

Professional automatic packaging system from a renowned European manufacturer consisting of two components, each with separate controls. The machines can therefore be operated together or individually. Suitable, for example, for packaging foodstuffs, technical articles, printing and paper products, household goods, toys and textiles. Automatic angle welder Smipack FP 560 A: -Automatic welding frame movement. -Automatic residual foil winding. -Automatic product ejection through the outfeed conveyor. -Start the process manually via hand button or foot switch. Alternatively, automatic process start is possible by entering a time interval on the display. -Conveyor belt infinitely adjustable in height via hand crank. -Welded frame approx. 580 x 420 mm. -Welded frame movement electromotive. -Water-cooled welding unit (closed system). -Maximum film roll diameter 300 mm. -Maximum fi ...

Manufacturer: LUKAS / JAWES OF LIVE New device with warranty for cutting cables, car parts, usable in recycling Cutting device LSI 200 Mouth width: 125 mm Weight: 13.8 kg Lukas cable shears Hydraulic cable shear for the mobile use. New machine The type LS/ 200 can be used very good to handle with heavy cable. Because of its excellent shear forces it saves much time. Its low weight makes it possible to work economically. The unique Lukas Star Grip valves makes it easy to use. The cutter blades can be resharpened. This makes a long service life. Operating pressure: 50 MPa Shear forces: up to 270 kN Width of mouth: up to 125 mm Dimensions: l/w/h 680 x 190 x 163 mm Weight: 13.8 kg. Hydraulic power system Operating pressure: 50 MPa Oil tank: 9l Output: low pressure 4.4 l/min high pressure 1.4 l/min Power: 1.5kW with 3000 min-l /230 V Dimensions: l/w/h 372 x 312  ...

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Diesel tank 10,000 litres double-walled used, with a new diesel pump Vision 60 The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder 1 Diesel pump Vision 60 (new) . Flow rate approx. 50 LTR/min . Hose length 4mtr can be extended. Container dimensions Length 5,310 mm Diameter 1,600 mm Weight approx. 1,500 kg Of course, you can also use your tank system. We are happy to offer you diesel pumps with a hig ...

MATEC forklift blades are robust and easy to build and can be attached to almost any commercial lyklift. With a fuse bolt, the tilting device can be blocked for special inserts. The front shutter flap can be mounted on any shovel. The interchangeable scraper is suitable for planing work such as removing ice, repelling soil, gravel or feed, etc. - Bucket width 1950 mm - Bucket depth type 1: 1000 mm, shovel depth type 2: 1330 mm - Bucket height without attachment 450 mm - Weight approx. 220 kg - Payload 2000 kg - Steel sheet 4 mm industrial lypainted - Fork shoes axle distance 800 mm - Fork tine width max. 170 mm - Fork thickness max. 60 mm - 4 lifting eyelets for krange slopes - Tilting device for cable pull with lifter and spring reset, securing bolt Options at extra cost: - Type 2 shovel depth 1330 mm Total price € 1590.00 - Front shutter € 590.00 - hydr. Liftin ...

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Diesel tank 7,000 litres double-walled used, with a new diesel pump Vision 60 The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder 1 Diesel pump Vision 60 (new) . Flow rate approx. 50 LTR/min . Hose length 4mtr can be extended. Container dimensions Length 3,710 mm Diameter 1600 mm Weight approx. 1,500 kg Of course, you can also use your tank system. All our tank systems are used in our company by selected employ ...

Cat.-Nr. 09-2900-2 in a very good condition for Ketchup, Mayonnaise, Dressing, Mustard In the industrial production of salad dressings, and mayonnaise, you will achieve optimum quality and maximum performance. The entire process plant is built compact and on a central base frame, and this allows easy transportation, quick installation and commissioning. Low Commissioning Cost Plant design ensures smooth production of your products The plant is quickly ready for operation Standardised Machines for best performance and value Our vacuum-process systems are designed to produce products such as Mayo, Ketchup, dressing, sauces, etc. The products can be produced in hot and cold method, also according to customer requirements. The product heating, and cooling is via a double jacket with insulation. The optional direct steam injection is used for rapid product heating, for ...

Cat.-Nr. 09-2900-1 in a very good condition for Ketchup, Mayonnaise, Dressing, Mustard In the industrial production of salad dressings, and mayonnaise, you will achieve optimum quality and maximum performance. The entire process plant is built compact and on a central base frame, and this allows easy transportation, quick installation and commissioning. Low Commissioning Cost Plant design ensures smooth production of your products The plant is quickly ready for operation Standardised Machines for best performance and value Our vacuum-process systems are designed to produce products such as Mayo, Ketchup, dressing, sauces, etc. The products can be produced in hot and cold method, also according to customer requirements. The product heating, and cooling is via a double jacket with insulation. The optional direct steam injection is used for rapid product heating, for ...

Cat.-Nr. 11-3200 new Necessary space for mash and lauter tun: LxWxH: 3 x 2 x 2,80 m Necessary space for tanks: LxWxH: 4,0 x 5,0 m complete 2 brews / day = 10hl Basic Equipment The Brew House is complete with all equipment. All equipment are with high standard an very simple to use. This 5 hl Brew House is built as 2 devices-brew house manual version with manual butterfly valve. It is possible to make 2 brews/day (10 hl) Technology All the pipes can be cleaned and sterilized in the circuit over the pump included. a) In the mash boiler the mash will be cooked, then it will be pumped with one beer pump made of stainless steel from mash boiler to the lauter tun. b) After the lauter wort will be pumped back to the mash boiler. c) After emptying the lauter tun the grit floor will be removed. The lauter tun will be changed to a whirlpool. d) After cooking th ...

Cat.-Nr. 11-3210 new Basic Equipment The Brew House is complete with all equipment. All equipment are with high standard an very simple to use. This 10 hl Brew House is built as 2 devices-brew house manual version with manual butterfly valve. It is possible to make 2 brews/day (40 hl) Technology All the pipes can be cleaned and sterilized in the circuit over the pump included. a) In the mash boiler the mash will be cooked, then it will be pumped with one beer pump made of stainless steel from mash boiler to the lauter tun. b) After the lauter wort will be pumped back to the mash boiler. c) After emptying the lauter tun the grit floor will be removed. The lauter tun will be changed to a whirlpool. d) After cooking the hops a special injection valve is introduced inside the lauter tun so that it can be used as a whirlpool. Mashing Tun / Wort Boiler Volume brutto: ...

Diesel tank gas station tank plant. 30,000 litres capacity according to DIN 6616/D, above ground, double-walled including an officially recognised test certificate. Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Storage tank 30,000 liters double-walled used . The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder HDMeco 80 Diesel pump with tank data acquisition for 100 users Flow capacity max. 77 l/min PC software Windows, also Windows 7, USB interface incl ...

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Diesel tank 25,000 liters double-walled used, with a new diesel pump Vision 80 The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder 1 Diesel pump Vision 80 (new) . Flow rate approx. 70 LTR/min . Hose length 4mtr can be extended. Automatic pumpgun new . Container dimensions Length 8,390 mm Diameter 2,000 mm Weight approx. 4,500 kg Of course, you can also use your tank system. We are happy to offer yo ...

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Diesel tank 7,000 litres double-walled used, with a new diesel pump Vision 80 The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder 1 Diesel pump Vision 80 (new) . Flow rate approx. 70 LTR/min . Hose length 4mtr can be extended. Automatic Zapfpisole is new . Container dimensions Length 3,710 mm Diameter 1,600 mm Weight approx. 1,450 kg Of course, you can also use your tank system. We are happy to offe ...

Tanking system Heating oil tank Diesel tank storage tank Hazardous fuel tank Safety tank Tank- & Environmental Protection Wozniack Specialist company according to Section 19 water budget law Ladies and gentlemen, we offer a 50,000 liter double-walled storage tank for the storage of diesel. fuel oil or other hazardous substances as follows. Rated capacity 50 cbm Piece 1 used but overhauled, i.e. the container is cleaned, new reworked, primed and painted Colour equipment lacquer RAL. However, you can also make your own colour wishes at any time Bring. Material steel in steel, material S235JRG2 Documents Manufacturer's certificate/test certificate in accordance with DIN 6616 D/2 and type plate Piece.  ...

Steel tank 30000 litres / 30 m³ / underground tank / firefighting water tank / double-walled / Rain water recovery tank / water cistern good condition, underground storage tanks, water tank, underground tank, diesel tank, heating oil tank, double-walled steel tank, Content: 30 m³ / 30000 litres Material: steel tank according to DIN 6608 Dimensions / size: approx. Ø 2.00 m x approx. 10.00 m long Weight: 6 tons Other: outside with bituminous insulation, double-walled, incl. test certificates. The container is used, inside empty and properly cleaned. According to the age traces are present. Steel tank / container can manure, as a storage tank for water, AHL, ASL, seeping juice, canola oil, rain collection tank, used fire-fighting water tank, water tank, etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your de ...

Silo used approx. 75 m ³ / 75,000 litres polyester silo / GRP silo standing, with or without frame, good condition Dimensions: approx. Ø 3,0 m x 12 m high without frame Bulk density 1, 2 t / m ³, Speidel tank, The container can be used as storage tank for water, liquid food, whey, potato steam skins, molasses, grain, salt, rain collection tank, and so on. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offers on our site: profi-tanks(dot)de