We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,704 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Inv. Num. : 6788 Type: GN1406TM Producer: GN Canada Created: 2016 Parameters: Equipment: Refrigeration unit EURO CHILLER GC A 015 Extensions for plastic coffee mats (80 mm) Moulding area: 320 mm x 150 mm Drawing depth (negative): 120 mm Drawing depth (positive): 25 mm Sheet width: 380 mm Material thickness range: 0.25mm-1.2mm Material roll diameter: 1000 mm Drying cycles per minute: maximum 45 Machine dimensions: 2400 mm x 1750 mm x 2050 mm Machine weight: 1000 kg After overhauling the main shaft and the motor, the machine is
used
Used extruder CANOL, type: RON 1/380 -in good condition- - 380 mm roller width - Condition: Very good, ready for immediate use Viewing and test run are possible by arrangement.
used
Cut-off band saw Canali Type: HBSG Saw roller diameter 1000 mm Cutting height approx. 500 mm Motor approx. 11 kW hydraulic feed table incl. some saw blades well-functioning condition
used
Used dosing unit CANOL, type: P10-E -in bakery condition- 2 pieces available - Built in 1998 and 2000 - Condition: Bakery condition, ready for immediate use - Number of nozzles: 1 piece -El. Connection: 400 V, 50 Hz, 037 kW Viewing and test run are possible by arrangement.
used
Description: HIGH-PRESSURE FOAMING MACHINE CANNON A-COMPACT 200 FC Possible discharge rate up to 2,600 g/s at a mixing ratio of 1 : 1 (polyol: isocyanate) Tank group Component tank, volume 250 litres Agitator on the polyol tank One mixing head type Cannon FPL 24 HP Hydraulic unit, volume 75 litres with heat exchanger Hose line polyol, isocyanate, hydraulics up to interface A  ,Motors with frequency inverter Dosing unit with two Cannon axial piston pumps, 55 cm3/rev Magnetic coupling on the isocyanate pump Touch screen control panel SIEMENS TP 177 6' SIEMENS S7 control system CHILLER ,FRIGOSYSTEM RACA/C 30 Capacity 2000 l/h Dimensions 800x600x1200 mm Approx. Onsite Dimension. (l x w x h): 3,000 x 2,000 x 2,000 mm, weight approx.: 3,000 kg
used
Description: HIGH-PRESSURE FOAMING MACHINE CANNON A-COMPACT 200 FC Possible discharge rate up to 2,600 g/s at a mixing ratio of 1 : 1 (polyol: isocyanate) Tank group Component tank, volume 250 litres Agitator on the polyol tank One mixing head type Cannon FPL 24 HP Hydraulic unit, volume 75 litres with heat exchanger Hose line polyol, isocyanate, hydraulics up to interface A  ,Motors with frequency inverter Dosing unit with two Cannon axial piston pumps, 55 cm3/rev Magnetic coupling on the isocyanate pump Touch screen control panel SIEMENS TP 177 6' SIEMENS S7 control system CHILLER ,FRIGOSYSTEM RACA/C 30 Capacity 2000 l/h Dimensions 800x600x1200 mm Approx. Onsite Dimension. (l x w x h): 3,000 x 2,000 x 2,000 mm, weight approx.: 3,000 kg
used
General SKU213W138 LocationBarneveld MakeQuadro Comil Type196 No.196-1316 Year of construction2006 Main Features MaterialStainless steel Motor7.5 KW Specified Features - Sieve granulator Granulating sievecheck Conical granulating sievecheck Rotor sizes110 mm, 280 mm Sieve sizes310x190 mm Sieve perforation1 mm With hoppercheck Inlet250 mm Outlet350 mm Motor400 volt, 7,5 kW With variable speed drive95-1000 rpm / 0-1800 rpm MaterialStainless steel Information Mounted on stainl. st. framecheck Mounted on wheelscheck With switchcheck Weight490 kg CEcheck Floor space1,50 x 0,9 m Total height1,65 m ATEX compatiblecheckNew arrivalsSieve granulatorsQuadro CanadaNew arrivalsSieves > Sieve granulatorsBrand > Quadro Canada What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination wo ...
used
1x self-adhesive labeling machine Cirio & C. / Canelli, Italy, as rotary machine with 3 stations, up to 3,500 bph., used, built in 1994, type: Rotativa A.L.9, running direction: left-right, front and back label + neck loops + award points are possible, format parts for: 0.2 + 0.275 + 0.33 + 0.5 + 0.75 + 1.0 ltr. Bottles are included, in working condition at a special price: €2,900 plus VAT from stock Dolgesheim
used
Description: From DIN A3 to DIN A5 Approx. Onsite Dimension. (l x w x h): 750 x 600 x 1,200 mm, weight approx.: 70 kg
used
General SKU213W135 LocationBarneveld MakeQuadro Comil Type197 U No.197-1131 Year of construction2002 Main Features MaterialStainless steel Motor1.5 KW Specified Features - Sieve granulator Granulating sievecheck Conical granulating sievecheck Rotor sizesDia. 110x60 mm Sieve sizesDia. 110x80 mm Sieve perforation0,5 mm With hoppercheck InletDia. 70 mm OutletDia. 150 mm Motor1,5 kW (400 V, 1405 rpm, EX) With variable speed driveFreq. drive Speed3500 rpm MaterialStainless steel 1.4306 (304L) Information Mounted on stainl. st. framecheck Mounted on wheelscheck With switchcheck Weight136 kg CEcheck Floor space1,35 x 0,90 m Total height1,40 m ATEX compatiblecheck Extra SpecificationsWith Servo lift, mobile lifter, load cap. 100 kg New arrivalsSieve granulatorsQuadro CanadaNew arrivalsSieves > Sieve granulatorsBrand > Quadro Canada What you can expect from Foeth: ...
used
Description: 5,705 KWp New solar modules 2x Canadian Solar CS3L-360MS, 1x Longi LR4-60HPB-360M, 1x Jolywood JW-HD120N-380, 3x Denim M2B375BT620H, 2x Longi LR4-60HPH-375M, 3x Risen RSM40-8-390MB, 3x URECO FBK400MFD solar modules packed ever 15 solar modules on a pallet. Pallet NO. 3 Nominal power per solar module: 360 Wp - 400 Wp Condition of solar modules: New Logistical data solar modules: 1,770 mm x 1,048 mm x 35 mm, 1,754mm x 1,037mm x 34mm, 1,756mm x 1,038mm x 35mm, 1,754mm x 1,037mm x 35mm, 1,254mm x 1,038mm x 35mm, 1,750mm x 1,095mm x 30mm, 1,722mm x 1,133mm x 30mm Logisticdata: Dimensions pallet: approx. 1,850 mm x 1,200 mm x 675 mm Weight pallet modules: approx. 332 kg Total weight: 332 kg Total packages: 1 Illustration similar. Approx. Onsite Dimension. (l x w x h): 1,850 x 1,200 x 675 mm, weight approx.: 332 kg
used
Description: 6,235 KWp New solar modules JA-Solar JAM60S02-300/PR, Canadian CS3L-375MS, Trina TSM400DE09.08, Trina TSM-390DE09.05, Canadian CS6R-400MS, Phono-Solar PS400M6H-18NH solar modules packed with 16 solar modules each on a pallet. Pallet NO. 5 Nominal power per solar module: 365 Wp - 400 Wp Condition of solar modules: New Logistical data solar modules: 1,668 mm x 1,050 mm x 35 mm, 1,764mm x 1,047mm x35mm , 1,753mm x 1,095mm x 30mm , 1,754mm x 1,096mm x 30mm , 1,754mm x 1,096mm 30mm , 1,721mm x 1,133mm x 30mm , 1,720mm x 1,132mm x 30mm Logisticdata: Dimensions pallet: approx. 1,850 mm x 1,200 mm x 740 mm Weight pallet modules: approx. 359 kg Total weight: 359 kg Total packages: 1 Illustration similar. Approx. Onsite Dimension. (l x w x h): 1,850 x 1,200 x 740 mm, weight approx.: 359 kg
used
Description: The foaming machine described below is designed for foaming sandwich elements. PRODUCT Panels for cold rooms DIMENSIONS Length x width max. 2,400 x 1,350 mm min. 600 x 180 mm Thickness: 40 ... 120 mm CAPACITY Press type: 2 + 2 Press table dimensions: 6,500 x 1,600 mm Number of press tables: 4 pieces , Occupancy of press table: 1 piece Extension of pressing tables: 60 sec Curing time / dwell time in the press: 15 - 45 min Occupancy rate: 0.9 Shifts: 2 pieces , Working time per shift: 8 h Panels per shift: 48/72 pieces Depending on foam thickness and raw material GROUND DATA (this set-up) Mixing ratio: 100 : 140 (polyol : isocyanate) Dosage - max: 1100 g/s per mixing head Specific gravity: Polyol 1.0 Isocyanate 1,2 Density: 45 - 60 kg/mÑ Start time: 20 sec (Other raw material data can of course be used for other applications) SYSTEM COMPONENTS Componen ...
new
Vario can 15-3 capacity: 6,000 cans/h - 0, 33 ltr. Cans with 15 filling valves and 3 head can seamer between filler and seamer is a Co2 injection the filler is for beer and softdrinks suitable for both 330 ml and 500 ml can size can type standard 211/202 pneumatic: Festo CE regulation filling valves: electronic control pre-metering valve CIP tulps included PLC: Siemens new machine So available: Vario can 20-6 capacity: 9,000 cans/h - 0.33 ltr. Cans with 20 filling valves and 6head seamer Vario can 32-6 capacity: until 15,000 cans/h - 0.33 ltr. Cans With 32 filling valves and 6head seamer Video!
used
Can filler KHS / Ferrum type filler: Innofill EMD type seamer: F 708 G suitable products: beer, CSD, etc. with 76 mechanical filling valves and 8head seamer can type: 211 / 202 standard can capacity: 42.000 cph by 330 ml can 36.000 cph by 500 ml can year of manufacturing filler: 1995 year of manufacturing seamer: 1994 electric: Siemens S 5
used
Ferrum can seamer, year of manufacture: 2005, type: F812-1, fitted to beverage can can lids 202. Ferrum Can Seamer, Year: 2005, Type: F812-1, adjusted to beverage cans, can lid 202, hight adjustable, canning line
used
CAN SEAMER, SOMME MODEL: 434 Technical description: ? oval format Dimensions: 2500 ? 2200 ? 1900 mm
used
CAN SEAMER SOMME, MODEL: 444, ¼ CLUB FORMAT Technical description: With protective fairing Throughput rate: ± 80/90 Jars/min Power supply: 380-440V/50-60 Hz
used
JAR SEAMER, SOMME MODEL: DIANA 383, ROUND FORMAT Technical description: Format: ? 83,7 mm No. of heads: 8 Power supply: 380-440V/50-60 Hz Dimensions: 3600 x 1600 x 2000 mm
Can filler and seamer KHS / SEN / Ferrum with 32 filling valves and 6head seamer Capacity: approx. 15.000 cph Filler and seamer will be complete reconditioned in our workshop including new electric control panel with PLC Siemens S 7 including Danfoss frequency inverter including beer pressure regulating valve including CIP dummies including CO2 injection before seaming and fixed for can type: 211 / 202 After reconditioning the filler and seamer will be in a condition like new.
used
Can filler and seamer Ortmann + Herbst Hansacan 30 / 5 Type filler: Hansacan with 30 filing valves, year of manufacturing: 1992, Type seamer: Ferrum F 505 G with 5 closing stations, Year of manufacturing: 2010 Yapacity: 21.000 cph by 330 ml standard cans - product beer Yapacity: 24.000 cph by 330 ml standard cans - product CSD Can type: 211 / 202 Electric system: Siemens S 7 with touch panel The filler and seamer are in an absolute top conditon and still in production in a European brewery until January/Februay 2024
used
Volumetric filler with 21 filling valves and 4head Sima seamer capacity: 10.000 cph
used
REF-2258 ANGELUS 60L AUTOMATIC CAN SEAMER WITH 6 SEAMING HEADS AND 24-VALVE VACUUM FILLING MACHINE Automatic can seamer with 6 seaming heads. Manufacturer: Angelus. Model: 60L. Can size: ø73mm. Complete with a 24-valve vacuum filling system (the vacuum pump is included). Overall dimensions: width 2,400mm, length 4,000mm, height 2,600mm.
used
REF-2260 SOMME FORTUNA-363 AUTOMATIC CAN SEAMER WITH 6 HEADS, CLINCHER AND 18-VALVE SOMME VACUUM FILLING SYSTEM Automatic can seaming machine with 6 seaming heads and clincher. Manufacturer: SOMME. Model: Fortuna-363 Fitted with a SOMME 18-valve vacuum filling unit. Can size: Ø 73mm. Output: 18,000 Cans/ hour Overall dimensions: length 5,500mm, width 1,800mm, height 2,300mm
new
3000 cans / h
Can filling line capacity: approx. 24,000 cph Filling Product: Soft drinks Can size: 330 ml and 500 ml standard cans Can Type: 211/202 consisting of: 1. Can depalletizer King with automatic can infeed system with Siemens S7 PLC including can table, pallet magazine, sheet removal system the depalletizer is fixed for the following pallet dimensions: 1.180 x 1.250 mm 2. Can rinser Transtech Hysek to rins new cans with filtered water infeed height: approx. 2,500 mm Outfeed Height: approx. 1,200 mm 3. Can filler and seamer KHS / Ferrum - Filler Innofill EMD 76 with 76 filling valves blocked with - Can seamer Ferrum type: F708G with 8 seaming stations the filler and seamer will be complete reconditioned in our workshop including new electric control panel with PLC Siemens S7 including Danfoss frequency inverter including beer pressure regulating valve including CIP ...
used
Can Filling Line for Beer and CSD, Automatic MITCAB 2000 cph – 2023 Complete can filling line with depalletizer equipped with 300ml can rinser, fully automatic filling block with an overpressure filler with 12 filling heads, one head can seamer and CO2 air pre-evacuation system built in filling nozzles, wraparound roll feed labelling machine for self-adhesive film labels with separate date coder, collecting table for manual packing of cans and intermediate can conveyors. The line is set up for 300ml standard and sleek cans and 500ml standard cans and designed for beer and carbonated soft drinks. Equipment was manufactured in 2023 and only tested, no commercial operation made. Technical Characteristics Producer MIDCAB Sweden Can sizes 330ml slim, 330ml standard, 500ml standard Capacity upto 1500 - 2000 cph Manufacturing year 2023 Operating hours Only tested, no commerci ...
used
Overview This complete can filling line for CSD & Beer was manufactured 2012 by French company Sidel. The line is still set up but no longer in use. Techn. Details Capacity: 27,000 cans per hour Beverages: Carbonated soft drinks, Beer Can type/Lid: 330 ml with 202 super end double seam Components Sidel Sweep off A/Z empty can depalletizer Magnoni vacuum transfer Magnoni gravity rinser Sidel Starcan MS 50V filler Ferrum F 706G seamer Sidel Starblend D3 EX 0433 EX460 mixer Sidel ML 2.4.ST1 CIP tank (4000L) Sidel CWD35/144 pasteurizer Magnoni can dryer (after seamer) Magnoni can dryer (after coder) Sidel TSP3 SDI BW tray & shrink packer Manual palletising Rotoplat semi-automatic pallet wrapper Conveyors
used
Overview This can filling line was in operation at a large German food company until last. The canning line is still assembled and ready for use. It is no longer in use as investments are being made in a new line. Technical data Capacity according to formats 150 ml Slim can - 18.000 cph 250 ml Slim can - 18.000 bph 330 ml Standard/ Sleek can - 15.000 cph 355 ml Sleek - 14.500 cph 500 ml Standard can - 11.000 cph 568 ml Standard can - 10.300 cph 900 ml King can - 6.500 cph Less than 3.000 operating hours Carousel pitch circle diameter: 1,080 mm 24 filling valves Machine pitch: 141 mm Single machines Can Depalletizer | Krones | Pressant Universal 1A | 2020 Infeed at the bottom Discharge on top Includes safety fences, can conveyors, vacuum suction unit do identify damaged cans Empty Can Inspection | Krones | Cantronic 709 | 2021 Can Rinser | Meyer | Infeed Twiste ...
used
REF-2261 AUTOMATIC CAN SEAMER SOMME NORA-313-VAC WITH VACUUM FILLING MACHINE 6 VALVES Automatic tin can seaming machine with 6-valve filling system Manufacturer: SOMME Model: NORA-313-VAC Can size: 3kg Output: 3,000 cans/ hour Vacuum pump dimensions: width 1,000mm, length 1,300mm, height 1,800mm Overall dimensions: width (including infeed belt) 3,600mm, length 1,900mm, height 2,000mm
used
REF-0 SOMME 323 CAN SEAMER WITH 5 HEADS AND VACUUM FILLING SYSTEM 20 VALVES Automatic tin can seaming machine with 5 seaming heads. Fitted with a 20-valve vacuum filling unit. Manufacturer: SOMME Model: 323 Can size: Ø 73mm (easy-open lids) Overall dimensions: length 3,400mm, width 2,800mm, height 2,200mm
used
REF-2259 SOMME DIANA-363-VAC AUTOMATIC CAN SEAMER WITH 6 HEADS AND SOMME 21-VALVE VACUUM FILLING SYSTEM Automatic tin can seaming machine with 6 seaming heads. Fitted with a 21-valve vacuum filling unit. Manufacturer: SOMME. Model: Diana-363-VAC Output: 12-15,000 Cans/ hour Can size: Ø 73mm. Overall dimensions: length 4,200mm, width 2,000mm, height 2,200mm
used
4 heads can seamer - d 83mm change part -driven lfter -atmospheric - with automatic lubrication system for sale As-is or maintained up to 15.000 cans/hours
used
for the production of pillow candies Power 10 - 250 kg/h, depending on type and size of the candies
used
Candle filter VelaCart B750 Seitz-filter-Werke Type: VELAcart B750 - 16 H 07 DN 080 Year of construction: 1991 Fabriknr.: 1992 Filter usage: Candle Room capacity: 105 litres Operating pressure (bar): 10 liquid / gas 10 Permissible operating temperature (° C): liquid 85 / gas 85
used
1 Piece of cantilever / heavy load shelving system PK (double-sided) top state (from hot rolled steel profiles) ABM.ca.: L. 2,600 mm (2 fields with 1,250 mm axis) T. 2 x 750 mm useful depth (+ 200 mm support) H 2.250 mm > per stand 4 piece arms one above the other > Adjustable grid 100:100 mm, screw > 5 Storage level incl. foot stabilizer > Load / arm / storage level = 450 / 1,350 kg > Rack load = provided 1,800 kg each always evenly distributed load > Rack section, IPE 200 / arms IPE 80 (incl. deflector, Rolling backup optional plugin) > Color: RAL 5010 (gentian blue), connector + diagonal cross galvanized As offer single-sided shelf 1.795,-price + VAT factory Gärtringen / plus freight
used
The canister-filler "D-K2-5000" is a pneumatic driven semi-automatic unit. The product to be filled will be aspirated through a tube and filled with a volume piston into the positioned canister. The positioning of the canister under the filling head happens manually. The filling range is max. 5,000 ml. With different programm settings bigger canister can be filled also (e.g. 30 Liter canister). - Capacity: 300 cans/h (depends on product, filling volume, packaging, etc.) - semi-automatic version, movable on wheels volume dosing of liquid and slightly pasty products - Volumetric filling quantity - Pneumatic electric system - The filling process is started by a foot switch - All wetted parts made of stainless steel and food-approved plastics (product-specific changes possible on request) - Dimensions: approx. 1,200 x 1,200 x 1,600 mm Optional: - Multiple sizes shoul ...
used
Manufacturer: TITUS SAIT TISCHO Weight: 28 kg Capacity: up to 400 cans / h Connection: 400V/50 Hz Dimensions: Width 400 x height 1400 mm Can size: from 63 to 113 mm Box height up to 280 mm Request a quote iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36
used
Various secure retirements for Canalis KS25 tracks, some with CEE and Sockets, partly for cable connection. Outlets with outlet fuses with machines or screw locks. Compl. Wired and ready for use. Finish request please inform. Questions to Manfred Raupp 0170 / 2204056 Mail to: fa.raupp@t-online
used
Repented range Purpose: Filtration of beer, water, syrup
used
Ready for SortimentZweck: filtration of beer, water, syrup
used
Candle filter of company Seitz-filter-Werke Serial number: 1988 Type: S000-31 H 07 DN 100 Year of construction: 1991
used
Kat-nr. 14-00134 in very good condition Description available Fabr.-No. 1992 Type: VELACART B750 - 16H07 DN 080 Built: 1991 Filter insert: Candle Liquid: Gas: permissible operating overpressure (bar) 10 10 Container permissible operating temperature (C) 85 85 Room capacity: Container (l) 105 Clamping screws type M20X85A2 Manufacturer: 2 Dimensions and weight: H x W: 2000 x 800 mm Weight: approx. 165 kg All prices ex works plus legal Vat Intermediate sale reserved Delivery: from Karlstadt-Karlburg location - freight costs: according to delivery
used
Kragarmregal OHRA 3 m high Over 100 m in stock, see pictures. Height 3 m high Boom 100 cm Load capacity/boom 800 kg 4.5 running metres, 4 pcs. stder with boom Negotiation price: € 1,440,-- /net Offer consists of: 4 St. Stander with foot 3 m high 4 adjustable booms, per stand 100 cm, load capacity 800 kg/boom. Diagonal struts, stiffening and distances are included. Frame spacing 150 cm Load capacity per stand per side 3,200 kg Height of 2.5 m, 4 m or 6 m available Other compilation on request: Constantly over 3000 lfm pallet racks in stock by numerous manufacturers. Transport and assembly possible on request. (changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms and Conditions, all prices excl. VAT from stock) Purchase / Sale We are looking for, ...
used
Fully reconditioned can filling machine for soft drinks and beer. Machine housing sandblasted and repainted. All seals and parts subject to wear new. Pneumatics and Electronics new (Siemens S7) Canned format: according to customer wishes upto o, 5 l
used
We offer 2 piece LINCK chipping type V 18 in very good condition. 2 x 85 kW drive per machine.
used
1 item Original full partial discs for gear (Cne and Cana/e) external diameter: 280 mm Bor: 150 mm Zaehne numbers: 20 / 42 / 48 / 54 / 56 / 64 / 72 / 78 / 100 / 110; good
used
Tunnel pasteurizer „TP- HRW 10' for canned products. Product: canned pickled vegetables; Salads; Capacity: 1000 – 10 000 PACKING/H material: stainless steel.
used
Year issue: 2017 - new Capacity: 20,000 cph, complete stainless steel Product: energy drinks and juice Can: 250 ml. Type of can: 202/200 slim can Heating method: Steam - Plate heat exchanger in outside of pasteurizer Material: Stainless steel AISI 304 1. TECHNICAL CHARACTERISTICS OF THE PASTEURIZER Temperature of product (inlet temperature) in pasteurizer: 2? - +6? Temperature of product (outlet temperature) from pasteurizer: +27? - +30? Pasteurizing temperature: +72? - +75? Holding on pasteurizing temperature: 12.5 min Heat consumption (steam by 3-4 bar) during stable operation: 480-550 Kg/h Temperature of steam: +140? Water consumption during stable operation: 0.5 - 0.9 m3/h. Consumption of compressed air 6 bar: 500-700 nl/h Total power consumption: 30 kw Supply voltage: 3F/N/PE/A, 50Hz, Control voltage: 400 volts Degree of protection: IP-54 ...
used
Collar shelving used, 4.20 m x 1.20 m condition very good, no content 4 shelf stand unilaterally 4200 mm high -usable foot and arm depth 1200 mm -Holes for the arm fixation all 100 mm -with 12 height-adjustable standard rack arms (3 PCs per rack) -Load capacity at load Centre 600 mm -750 kg each arm / 2250 kg per stand -Wheelbase with longitudinal and diagonal associations: 1.30 m / length shelf number approximately 4.00 m -all parts galvanized -including all screws and nuts, without ground anchor.