134,061 used machines on RESALE, but how to find them? Machine Search
used
May SS80 U Machine can be visited by arrangement under power
MEP Multimatic SA8, year of construction 1995 Straightening and cutting system for reinforcing steel, fully automatic, complete functional system, immediately available Plant still in operation and can be demonstrated.
Bread packaging machine Hartmann Automat GBK 220 -Sliced bread packaging machine Hartmann -Model Automat GBK 220 -Weight 1600 kg -Year of construction 1999
Rogers 300 HYD Knife Roll Grinder Model: 300 HYD Size 102 Year of arrival at the plant: 1961 Space used by the machine: 7 x 2 x 1,8m Worktable dimensions: 2600 x 250,50 mm. Longitudinal table travel (stroke): 3000 mm. Magnetic system of the table: EML 15 - 115 Volts - 13 Amp - 1500 Watts. Longitudinal slide feed: 0 - 28 m/min. Cross travel without abrasive wheel: 200 mm. Cross travel with new abrasive wheel: 92 mm. Vertical Capacity: 200 mm. Abrasive wheel: Ring abrasive wheel, 26" outer dia., made up of 10 segments type 53 (S/G FLAT RS-801-B) of 6.1/2 "x 2 "x6". Each segment must indicate the maximum RPM for the ring. Abrasive wheel head speed: 560 Rpm. Cooling tank capacity: 259 liters
Bottle washing machine, Fabr. Krones, type: Lavatec KESK 245/17-120, control range 4,000 - 11,000 fl/h, for bottles with max Ø 105mm, built in 2002, Eind machine, with 180 rows of 17 bottles/row each, with pre-soft water and lye, main liquor with immersion switch and after-liquor spraying, 3 water sprays hot, cold and fresh water in stock from May!
M. No.: 167 Format (cm): 58 Equipment / Additional information: 1xreserve knife Very good condition // tested, checked and revised
REF-0 MANZINI (COMACO) CAN SEAMER FOR 3KG CANS Automatic can seamer manufactured by Manzini (Comaco) Model: A-350 Can size: 3kg Fitted with 3 seaming heads Power: 12HP Dimensions: 1,800mm width, 2,500mm length, 2,600mm height. Optional: 15-valve vacuum filling system for 3kg cans (vacuum pump included). Filling system dimensions: width 2,100mm, length 1,200mm, height 2,400mm.
Continuous drilling rig Biesse Techno Logic Masch. No 873/90 Position 1: Loader BIESSE-TECHNO LOGIC Item 2: Transfer BIESSE-TECHNO LOGIC Item 3: Transfer BIESSE-TECHNO LOGIC Item 5: Continuous drilling machine BIESSE-TECHNO LOGIC Item 6: BIESSE-TECHNO LOGIC horizontal continuous drilling rig Item 7: Transfer BIESSE-TECHNO LOGIC Item 8: Transfer BIESSE-TECHNO LOGIC Position 9: Brushing machine BIESSE-TECHNO LOGIC Item 10: Unloader BIESSE-TECHNO LOGIC Weight approx. 4 to L x W x H: 6.0 x 2.4 x 2.5 m Year of construction 1990 Dismantling by buyer The plant is in good condition, ready for operation Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12
SCM st 1g Format circular saw milling machine Format sliding table in 1.2m Cutting height: 67mm 90° 40mm 45° Auslegertich kpl. Cutting width 700mm Saw blade: swivel 45°, max.250mm 1.8KW 2 motors 400V 50HZ Milling machine: rigid 90° Milling machine rpm: Speeds: 5000/7500 rpm. Milling stop max tool diameter max. 160mm Suction pipe 60 - 120mm Weight 190kg Eccentric tensioner G&STÜ-5501048
Machine Details Warehouse number 1105-03571 Machine Type Machining Center - Vertical HARTFORD brand Type VMC 1020 Year of construction 1999 Control type CNC Control FANUC OMD Storage location FRANCE Country of origin Taiwan Delivery time immediately Freight base EX WORK Technical details x-travel 1020 mm y-travel 510 mm z-travel 510 mm Table clamping surface 1200 x 600 mm Speed range - milling 8000 rpm Control FANUC OMD Drive power - Milling spindle 11 kW Tool holder BT 40 Number of tool magazine slots 24 stations Feed range 1 - 10000 mm/min Rapid traverses: 20 m/min Total power requirement 25 kW Machine weight approx. 5500 kg Space requirement approx. 2300x2200x2600 mm Accessories Full protection - fairing Complete machine documentation Information very nice MACHINE CONTROL FANUC O MD SPINDLE BT 40 8000 RPM
Machine Details Stock-No. 1105-03574 Type of machine Machining Center - Vertical Make CHIRON Type FZ12 WM Year of manufacture 1995 Type of control CNC Storage location HAGUENAU Country of origin Germany Delivery time immediately Freight basis EXW -free on truck Technical details x-travel 550 mm y-travel 300 mm z-travel 425 mm tool taper SK 40 control Siemens 810 total power requirement 12 KVA weight of the machine approx. 4.0 t transport dimensions LxWxH 2,05x3,05x3,0 m Additional information chiron fz 12 wm with changeable plate with 2 x 4. axis PEISELER WIth CONTROL SIEMENS 810 TOOLS SK 40
Travel distances: 350 x 250 x 315 mm [ X x Y x Z ] Table size X: 576 mm Table size Y: 400 mm workpiece weight: 500 kg C-axis Pinole recording: EROWA
Machine Details Warehouse number 1105-03578 Machine Type Machining Center - Vertical StAMA ROBODRILL brand Type MC 010 Year of construction 1990 Control type CNC Storage location HAGUENAU Country of origin JAPAN Delivery time IMMEDIATELY Freight base from stock Technical details x-travel 500 mm y-travel 380 mm z-travel 300 mm Spindle holder ISO 30 sk sa Clamping surface 650 x 380 mm Tool magazine with 10 seats Tool change time 5 sec workpiece weight 200 kg Speeds - autom. switchable 60 - 8000 rpm Feed speed 1 - 4095 mm/min Feed force 400 kp (X, Y) Feed force 1000 kp (Z) Rapid traverse speed 36 m/min (X, Y) Rapid traverse speed 30 m/min (Z) Information Equipped with/ Equipped with: - FANUC 0 M Control - 10-fold tool changer SK 30 - Coolant system / cooling attachment - 4 T-slots / 4 T-slots TOOLS SK 30
Travel: 825 x 680 x 405 mm [ X x Y x Z ] Table size X: 1200 mm Table size Y: 850 mm workpiece weight: 3000 kg Electrode changer: 50 - fold Generator POCON 60 Pinole recording: EROWA Heavy Duty Adapter O-Module Halogen lamp
Kemper Soft-Star dough dividing and warp knitting machine Head machine Kemper Soft-Star 6-row dough part and automatic knitting machine with plastic funnel. The maximum hourly output of the machine is 2400 pieces per row and for our machine a total of 14,400 pieces per hour. The clock frequency is 40 strokes per minute. The operating side is in the direction of travel on the left side. The active range of the active drum is between 50 and 60 grams. - 6 rows - with plastic hopper - with Siemens Touch Panel control - Year of construction 09/2004 Electrical data Operating voltage: 400/230 Volt 50Hz Control voltage: 24 Volt DC Rated current: approx. 4kW
Label book printing machine, 4 colors, 3 colors, 2 colors or 1 color, punching unit, 2 embossing plates, various mounting plates, laminators, UV dryers, dispensers, slitter rewinders, scanner camera, in good condition, immediately available
WALDRICH SEIGEN WST IV H80 X 12000 ROLL GRINDER YEAR: 1981 / INSTALLED 1982 MAXIMUM GRINDING DIAMETER: 78” ( 1981.2 mm) WITH 32” (812.8 mm) DIAMETER WHEEL MAX DIAMETER CAPABILITY: 2500mm DISTANCE BETWEEN CENTERS: 472.40” (12000mm) MAXIMUM WORKPIECE WEIGHT: 176000 lbs. (80t) WHEEL OD MAXIMUM: 32.00” WHEEL WIDTH MAXIMUM: 4.00” WHEEL ID: 12.00” WHEEL SPINDLE POWER: 27 - 59/59 HP WHEEL DRESSER: BED MOUNTED ROLL WHEELHEAD TRAVEL: 25.60” TABLE TRAVEL: (WHEEL HEAD TRAVEL) 488.40”( 12405 mm) TABLE SPEED: (WHEELHEAD SPEED) 157.5 in/min (4000 mm/min) WHEEL SPINDLE SPEED: 450 - 1800 RPM Infinitely Variable WORKHEAD POWER: 1.9 - 59/59 HP WORKHEAD SPEED: .5 - 300 RPM WAYS: CAST IRON FULL HYDROSTATIC SLUDGE CONVEYOR: NONE COOLANT: YES FILTRATION SYSTEM: COMBINATION 2 CARTRIDGE AND FABRIC FILTER WAY COVERS: METAL TELESCOPIC POWER 3PHASE / 50-60 Hz / 200 - 50 ...
Arm length: 1600 mm Drilling capacity in steel: Ø 50 mm Tapping in steel: M50 x 1.5 mm Spindle holder: MK 5 Spindle speeds: 28 - 2500 rpm. Spindle feed: 0.05 - 2 mm/rev Spindle stroke: 310 mm Spindle -> slab: 1500 mm max. Tension throwers; 1000 x 750 mm Clamping flat floor plate: 1820 x 986 mm Complete with: - Kuhlanlage - Operating instructions Spindle motor: 4 kW Country of origin: Czech Republic Machine Weight: 4300 kg Machine LxWxH: 3250 x 1120 x 3400 mm
Brand machine NEW - The Ricoma EM-1010-10S is a single (1) head, 10-needle/color embroidery machine. It can be used for flat embroidery, including bags and pouches, as well as for embroidery on caps and underwear. It features a 10-inch LCD control panel with an easy-to-use and intuitive touchscreen. FEATURES 1 embroidery head with 10 needles maximum embroidery area 380x210 mm automatic thread cutting maximum sewing speed 1000 stitches per minute LCD display that shows in real time the execution of the model and its processing directly on the machine frame for embroidery caps with an angle of 220 degrees USB port automatic color change automatic detection of thread breakage or its termination pre-outlining of the model to be embroidered the machine is capable of storing in memory a total of 20 million stitches (each model can be composed of 100 thousand stitches) emergency stop button mul ...
Back punching machine Schmedt Präcut HHS 65; good condition; cleaned and tested; Block height max.350mm; Block thickness max.90mm; 3 replacement knives. Book block spine machine Schmedt Präcut HHS 65; good condition; cleaned and checked; max.block hight 350mm; max.block thikness 90mm; three knifes.
MORI SEIKI NT6600 CNC INTEGRATED MILL TURN CENTER WITH LIVE MILLING MAXIMUM SWING OVER BED: 42" MAXIMUM WORK PIECE DIAMETER: 42" MAXIMUM WORK PIECE LENGTH: 239" MAXIMUM BAR DIAMETER: 6.4" SPINDLE BORE: 7" X AXIS TRAVEL: 41" Y AXIS TRAVEL: 26" Z AXIS TRAVEL: 242" B AXIS: +/- 120 DEG. MAIN SPINDLE SPEED: 1500 RPM MAIN SPINDLE MOTOR: 40 HP MILLING SPINDLE SPEED: 8000 RPM MILLING SPINDLE MOTOR: 40 HP ELECTRICS: 220V/3P/60Hz/216A OAD (APPROXIMATE): 490" X 182" X 169" HIGH WEIGHT (APPROXIMATE): 120,560 LBS. EQUIPPED WITH: C AXIS YAXIS B AXIS LIVE TOOLING/MILLING 20" CHUCK FS-31iA5 CNC CONTROL 140 POSITION AUTOMATIC TOOL CHANGER PROGRAMMABLE TAILSTOCK COOLANT THROUGH SPINDLE (HIGH PRESSURE) CHIP CONVEYOR Additional Control Options: Automatic Power Shut-Off MAPPS 4 System Part Program Storage: 8mb Stored Programs: 1000 Remote Communication Function ATA Flash M ...
Label book printing machine Labelmen PW180DLU, YOC 1996, 4 colors, punching unit, embossing device, various mounting plates, laminators, UV dryers, dispensers, Slitten rewinders, in good condition, immediately Available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.
Auction-ID: A7-45992-75
Gauge: 16; Withoute pallet; Auction-ID: A7-45992-101
Folding machine MBO T49/4, machine number 83067246, 4 pockets + delivery, flat stack feeder, counter, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.
- Pallet feeder T 1020 FP 112 - 1. Station T1020-1-1020/6 buckles - 2. Station T800-M-2-88/6 buckles - Z2 mobile cross fold station - DESTA FSA 1000 delivery (1996)
aschinella details Warehouse number 1105-03375 Machine type Milling machine - Universal CmE brand Type FC 1100 Year of construction 1991 Control type NC Storage location FRANCE Country of origin spain Delivery time immediately Freight base from stock Technical details x-travel 1100 mm y-travel 700 mm z-travel 500 mm Receiving cone of the main spindle 40 SK Motor power 10.6 kW Table clamping surface 1400 x 450 mm Speed 40 - 1800 rpm Dimensions L-W-H 2.4 x 2.15 x 2.1 mm Machine weight approx., 3800 kg Information Equipment: - Heidenhain - Control model TNC 124 - Universal milling head "Huron" design - 2 counter holders for horizontal milling - autom. Tool clamping - Lighting - Central lubrication
Spiral Kneader Model: SM 60 Kneading machine with robust technology! Digital easy Touch Control with dough temperature display Dough machine with 2 timers Boiler lighting for min/max. 2 - 40 kg dough Flour dust hood Stainless steel boiler with 60 liters Machine mobile with 2 locks with EMERGENCY circuit DGUV V3 tested Connection 400V, 2.4 kW, 16A-CEE plug Dimensions: 600 x 980 x 1090 mm, WxDxH NEW Machine With 24 months warranty Come in our bakery machines sale!
Gauge: 16; withoute pallet; Auction-ID: A7-45992-106
Spiral Kneader Model: SM 85 Kneading machine with robust technology! Digital easy control with dough temperature display Dough machine with 2 timers Boiler lighting for min/max. 4 - 60 kg dough Flour dust hood Stainless steel boiler with 85 liters with EMERGENCY circuit Machine mobile with 2 locks DGUV V3 tested Connection 400V, 3.5 kW, 16A-CEE plug Dimensions: 620 x 1030 x 1180 mm, WxDxH NEW Machine With 24 months warranty More bakery machines can be found in our large warehouse!
Not tested; Auction-ID: A7-45992-120
Bread cutter Model: Varia Pro 1000 easy operation 200 discs/min Cutting width/bread length 490mm Circular knife machine manual operation Disc thickness adjustable from 4 - 30 mm Dimensions: 990 x 746 x 1080 mm, WxDxH Bread dimensions max: 490 x 340 x 160 mm L x D x H DGUV V3 called Connection 230V,1 kW New machine with 24 months warranty Option: - Stainless steel version - Automatic claw - Bag holder - Special colours - front bread tray Visit our large bakery machinery exhibition!
Brand machine NEW - Ricoma MT-1502 is a two (2) embroidery head embroidery machine with 15 needles/colors. It can be used for flat embroidery, including bags and pouches, as well as for embroidering caps and underwear. FEATURES maximum embroidery area 560x360 mm automatic thread cutting maximum sewing speed 1000 stitches per minute LCD display that shows in real time the execution of the model and its processing directly on the machine frame for embroidery caps with an angle of 270 degrees USB port automatic color change automatic detection of thread breakage or its termination pre-outlining of the model to be embroidered the machine is capable of storing in memory a total of 20 million stitches (each model can be composed of 100 thousand stitches) step 0.1~12.7 mm emergency stop button multilingual menu servo motor at 230V/50Hz automatic return to the origin point after each embroidery ...
Gauge: 16; Withoute pallet; Auction-ID: A7-45992-105
Machine table for laser marking, stable design, aluminium electric height adjustment 36 cm by Rose+Krieger Additional mechanically adjustable height adjustment 4 frame feet - all adjustable Frame dimensions without table: H 121cm, W 88 cm, D 117 cm Table surface: W 80 cm x D 48 cm
Saw blade chamfering machine Manufacturer: Loroch Type: AK Year of construction: 1991 For chamfering HSS and segment circular saws
maximum number of results exceeded
please refine your search
1.000 € 
