can making machin used for sale

BALLISTRINE- linear profiler,/shaper-double sided 10 hp cutter head per side- follows your templates - shapes both sides- 9' table- hydraulic feed- material hold downs- $7,800

UNDER NEGOTIATION HUSKY GL300 System 48mm +3025 +Edible Oil 32mm + 2921 molds OPPORTUNITY HUSKY GL300 YEAR 1998 MOLDS + 48mm water neck finish 32 cavity complete mold (hot runner) with 2 sets of core (81gr~85gr~91gr.) + 30/25 water neck finish 48 cavity complete mold (hot runner) with 1 core set (16~18.2 gr) + 32mm edible oil (snap on)(wide edible oil) neck finish cold half mold with core set (24~27gr.) + 29/21 edible oil 25 gr neck finish preform change over kit. Auxiliaries: Piovan mold dehumidifier, resin dryer with hopper, and T conveyor 400v 50hz Condition: Fair condition, connected (can be inspected) More pictures upon request USA Line: +1 305 831 8888 whatsapp +5491157143569 j.plaul@optimisense

BALLISTRINE- C 70 N- auto feed thru (2) sided shaper(2) 10HP; 3PH spindle motors • (2) 30mm diameter spindles with 5in. under the nut • Spring loaded floating spindles • In-feed and out-feed rubber covered upper feed rollers • Working width 14.4in. (360mm) max • Working height 4.8in. (120mm) max • Min working length 9.6in. (240mm) • Spindle 8,000 RPM • feed 3 to28..Price-$8,900

Sirona Small X-ray / Intraoral Machine Heliodent Plus with Tube D 3507 0.4 • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg, Germany. It is packed on pallets, professionally lashed and wrapped in stretch film and can be picked up immediately • You buy the system in "IST" condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system or plant components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

Mikrofinishingmaschine, microfinishing machine, used gebrauchtTyp: MA 3/1000Hersteller: Thielenhaus machine factory WuppertalSteuerung: manually, konv. maximum part size / max. worksize: d = 155 mmMax. 310 part length / max work.length: mmGenauigkeit / precision: 0.001 mmLeistung / load: 12.4 kW, 380/400 ~ specification: stock finish. grinding wheels Floor finishing tools including Machine application: high-precision surface grinding of piston pin

Metabo welding machine

IMA BLISTERING MACHINE, MODEL C102 Year of construction: 2018 Machine for tray production with automatic product feeding, characterized by a balcony style structure which also allows a customization of the feeding area depending on the product to pack. the linear work flow of the material allows an easy forming material introduction each change-over despite its simplicity, it’s an ideal tray forming machine with attractive speed flexible for the packaging of syringes, ampoules, vials, small cosmetic products, solid forms etc. extremely simple to use for semi-skilled operators too PRODUCTION Cycle speed 15-40 cycles/minute Tray dimensions 30-138 mm (W) x 52-250 mm (L) x 3-25 mm (D) Vial blisters production 3 Blisters/Forming Step (Ampoules): 5 x 1ml 5 x 2ml 3 x ½ml 1 x ½ml

CNC vertical jig boring machine WMW MIKROMAT Type BKoZ 900x1400/5NC Travel X 1120 mm Travel Y 710 mm Spindle travel Z 315 mm Travel W 630 mm Numerical Command CNC NUM 1060 Spindle Ø 125 mm Cone SA40 Rotation from 36 to 2240 RPM Table size 1400 x 900 mm Distance between colums 1080 mm Maxi distance spindle nose/table from 0 to 900 mm max Maxi eligible load on table 1000 kg max Separate electrical panel Machine renewed in 2000 with CN NUM1060 Voltage 380 V Dimensions (L x W x H) 4000 x 2460 x 3030 mm Weight approx. 9 T MACHINE IN OUR STOCK IN FRANCE.

KLÖCKNER MEDISEAL BLISTER PACKING MACHINE, MODEL CP200 Year of construction: 2018 Very compact machine of balcony construction with minimum space requirements and an output of up to 300 blisters per minute; format change over time of less than 30 minutes. Specially developed for efficient packaging of smaller lot sizes and clinical trials. Balcony construction Roller sealing Full set of manuals Machine previously used in the Pharma industry and is in like new condition, it has been deep cleaned with cleanliness certificates available on request. Water chiller KB56 and extraction unit available on request at additional cost. Output of up to 300 blisters per minute (dependent on product, material, and blister size) Power supply: 230/400V, 3 phase, 50 Hertz, neutral conductor FORMAT RANGE (1 LANE) Draw-off length forming: 170mm Draw-off length punch: 110mm Web ...

Manufacturer: Lid Type: DE10C Year of construction: 1997 Following the technical data: Table dimensions L x b 390 x 280 mm traverse path: X - axis: 250 mm, Y - axis: 180 mm, Z - axis: 250 mm Table - Quill distance min./max.: 240 / 490 mm Table load: Max: 250 kg

Continuous vacuum filler for straight filling, portioning, and twisting Optional: twisting and holding device All in one 80 liter hopper with counter arm and reinforced scraper, tipping, and hopper lock Hopper inlet 100 mm diameter Integrated vacuum pump Program memory for 99 filling programs Portion weight: from 5 to 60.000 g Electric power: 4 KW Machine dimensions in cm: Width: 70 Length: 90 Height: 165 Delivery time: 20 working days after advanced payment

HERMA LABELLING MACHINE, MODEL H400 Year of construction: 2016 Ideal solution for the simplest applications, without sacrificing reliability, precision and quality. The applicators are operated via the keys of the key pad and the display, which allows entry and adjustment of applicator parameters. Included: OCS HC checkweigher from 2016 (max 700 gr). PRODUCTION Maximum speed: 25 m/min Paper passage: 160 mm Diameter label reel Standard: 300 mm (12) Maximum: 400 mm (16, optional) Core diameter Standard: 76 mm (3) Adapter: for 152 mm (6) ELECTRICAL CONSUMPTION Max. power consumption: approx. 200 W Leakage current, according to EN 60335-1 110V/AC:

Qty. 1 Second-hand polishing machine Mfc.: Madar Aluminium Built: 2010 Type: PM 2000 Overhauled: No, but the machine was very rarely used. Operation length: 7000 mm Operation width: 800 mm Profile thickness (workpiece thickness): 10 mm up to 200 mm Polishing drive: 2 x 25 kW including converter (Lenze) Power total: 65 kW Siemens PLC system & touchscreen: PLC -SIEMENS S7200 Touchscreen - SIEMENS TOUCH PANEL TP177MICRO ( 1P 6AV6 640-0CA11-0AX0)

IMA OVERWRAPPING MACHINE, MODEL BFB DIVISION 3711 Year of construction: 2016 Production reaches 110 cycles/min handling somewhat larger sized products. Changeover procedures are fast and easy, to avoid unwanted downtime. High quality individual or multiple over wrapping for regular product Complete with a device to lift the film-driving rollers during product elevation These machines enable the use of extremely thin films and avoid the film sliding around the product, thus obtaining the perfect over wrapping finish The equipment uses standard Siemens electrical components and a Siemens PLC. The steel frame is oil-tight and lubrication is by means of oil bath. TECHNICAL SPECIFICATIONS Electrical frequency: Hz 50 Operating voltage: Volt 380 Air pressure: bar 6 DIMENSIONS Net weight: Kg 1500 Length approx.: mm 6400 Width approx.: mm 1735 Height approx.: mm ...

JORNS MAXI LINE 200SW folding machine was built in 2007 in Switzerland. The machine, designed for precision bending of various types of sheet metal with a maximum length of 6400 mm, is a HIGH variant, which offers a faster work speed of up to 25% compared to the standard model. During its use, the JORNS MAXI LINE 200 hydraulic folding machine has undergone regular maintenance. All moving parts and the bending bar were replaced with original manufacturer’s parts. Technical data of the JORNS MAXI LINE 200SW CNC folding machine - control system CNC 600 - maximum sheet metal length: 6400 mm - maximum sheet metal thickness: 2 mm - rear measuring table type 91 with AC servo motor - rear measuring table range: 1000 mm - roller shear SM 3 - foot switch - maximum hydraulic pressure: 250 bar - motor power: 7.5 kW - power supply: 380-420 V; 50 Hz

right / left Number of spindles 4 Slide stroke 800 mm Drilling area in steel St-60 Full drilling dia. 15 mm Boring dia. 20 mm Drilling method Single-lip drill

Stock number 1105-02617 Machine type flat grinding machine Make Elf Type OPTIMALLY 4250 NC-K Built in 1993 Control type NC Storage warehouse Country of origin Germany Delivery time immediately Exhibition Hall, ver free freight basis Technical details Grinding length 450 mm Grinding width 250 mm Workpiece height 375 mm Table length 800 mm Table width 250 mm maximum work-piece weight 400 kg Autom. Cross feed adjustable 3-50 mm / stroke Vertical delivery, 1 Division 0.001 - 0.06 mm Grinding wheel diameter 300 mm Grinding wheel width 50 mm Grinding wheel diameter 36 mm Voltage 380 V Grinding spindle motor 3.7 / 4.7 kW Total power demand 9 kW Machine weight approx. 2.6 t Space requirement of approx. 2800 X 2500 2300 mm Additional information automatic delivery -Electro magnetic clamping plate with straight fine pole pitch, dimens ...

Mikron Milling Machine WF2/35 - Width: 120 cm - Depth: 140 cm - Height: 180 cm Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Table size: 254 x 1100 mm Table movement x: machine. u. v. hand 682 mm Table movement y: hand 380 mm Table movement z: hand 457 mm Milling head swiveling to: +/-90 or +/-45 ° Spindle retainer: ISO 40 Spindle speeds: 70-2300 rpm Quill feeds: 0.038 â 0.152 mm / min Spindle drive: 380 V, 2.2 kW Space: 1600 x 1600 x 2150 mm Weight: 1420 kg

Screws and small part scoop Brand: Hammer Type: SKP-M-300 Other details: Please see photos All information without guarantee

ATMSolutions ATMS 1325 CNC milling machine built in 2017 in Poland is designed for the production of both small and large parts made of e.g. aluminium, plastic or wood. The machine on offer is like new, it has never worked after a trial run. The machining process is performed on a large vacuum table using a powerful, water-cooled spindle. The steel frame, by increasing the overall rigidity, makes it possible to achieve unprecedented precision and accuracy in machining, removing any vibration and deformation. In addition, the X and Y axes are equipped with trapezoidal guides with gear drives with bevel teeth, thanks to which excellent dynamics and feed repeatability are achieved. This is complemented by an intuitive CNC control with professional CAM software that supports G-CODE and .nc commands. The ATMS 1325 CNC milling machine weighs 1000 kg. Technical specifications of the ATMSo ...

Machine

Poly-Clip SCH 6210 Width x Depth x Height: 200 x 360 x 900 mm Weight: 10 kg Suitable clip sizes: SCH 6210: S 625/628/632/638 The SCH 6210 single-clip machine is manually operated. Operation is hassle-free and does not require much effort. A hand lever closes the rake flap and sets the clip. The excess intestinal or bag braid can be removed with the integrated cutting blade. The single-clip machine is ideal for sealing cut goods, for dividing portions and for bag sealing. All plastic, fibre, collagen and natural casings from small calibers up to 120 mm are processed. Advantages: - Manually operated - independent of energy sources - Easy to transport - low weight - Repeatable clip pressure adjustment depending on casing type - Integrated cutting blade - Machine made entirely of stainless material - Easy to clean Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 ...

Torque / angle / preload Analyzer Testing and measuring instrument Brand: Treasure Type: 5143-2012 G Other details: Please see photos All information without guarantee

Torque/angle/preload Analyzer Testing and measuring instrument Brand: BLM Type: 5040 Number of pieces: 2 More info: Please see photos All information without guarantee

Machine grinds in linear pass, Extremely robust design. Specifications: Workspace: Largest sanding width 150 mm Highest working height for new grinding tool (workpiece passage) 50 mm Diameter of the grinding wheels 600 mm Speed upper grinding wheel 765 rpm Lower grinding wheel 765 rpm Circumferential speed: upper grinding wheel 24 m/s Lower grinding wheel 24 m/s Dimensions of the abrasive tools: Ø 600 x 75 x Ø 50 mm Workpiece feed speed infinitely adjustable from 35 to 350 mm/s Grinding wheel infeed: Total travel per grinding wheel 150 mm Grinding wheel feed servo motor controlled Dressing Unit: Servo Motor Controlled Grinding motors: 30KW Ges. Power requirement approx. 62KW Dimensions of the machine: Length approx. 2750 mm Width approx. 2050 mm Height: approx. 3000 mm Footprint: Length: approx. 4350 mm Width: approx. 5020 mm Weight: 6500 kg The m ...

Hardness tester Manufacturer: Stiefelmayer with drawer Cabinet For more info please see photos

Roundness measuring instrument, BALLIGKEITS - & OVALITAETSMESSGERÃ?T Manufacturer: Philip Hafner with DigitameÃ?anzeige HEIDENHAIN Condition: used All information without guarantee

3000 x 1500m 10 kW Fiber laser cutting machine

It shapes the dough, which is sheeted with the help of two polyamide rollers, at any length and thickness by the means of 2 or 4 cushions The roller can be adjusted between 0-30 mm without restriction There is a spring scraping mechanism made of stainless steel on the roller The dough can be shaped at 420 mm length thanks to the polyester woven and resistance increased long-life conveyor belt and adjustable roller group The folding chain and its component are made of stainless steel It has 2500 pieces of dough shaping capacity per hour and the feature of processing 100-1200 gr dough Capacity: 2500 pcs/h Dough molding weight: 100 - 1200 gr Number of the pressing board: 1 Number of rollers: 2 Width of conveyor belt: 400 mm Width: 650 mm Length 1: 2350 mm Length 2: 1850 mm Length of pressing board(s): 1100 mm Height: 1200 mm Height of dough entry: 1180 mm H ...

Manufacturer/manufacturer: Arburg Typ/type: 420C 1300-250 Year/year: 1999 Control/controller: Selogica Clamping force/clamping force: 1000 kN Holmabstand/Dist.Betw.Tiebars: 420 x 420 mm Disk size/platen size: 605 x 605 mm WZ height/mould hight: min 250 mm Opening/opening stroke: 500 mm Plate distance of max/Max open daylight: 750 mm Auger/screw size: 35 mm Stroke volume/shot volume: 144 CC / 132 gram PS spec. Spritzdr / injection pressure: 1820 bar General / General Engine power: 18.5 kW Heating/heating power: 6,5 kW Dimensions/dimensions: 4.3 m x 1.7 m x 1.8 m Weight/weight: 3180 kg Screen text/language: German/English Additional equipment/additional equipment Core puller / core pulling: x 1 Robot

It shapes the dough, which is sheeted with the help of two polyamide rollers, at any length and thickness by the means of 2 or 4 cushions The roller can be adjusted between 0-30 mm without restriction There is a spring scraping mechanism made of stainless steel on the roller The dough can be shaped at 420 mm length thanks to the polyester woven and resistance increased long-life conveyor belt and adjustable roller group The folding chain and its component are made of stainless steel It has 2500 pieces of dough shaping capacity per hour and the feature of processing 100-1200 gr dough Capacity: 2500 pcs/h Dough molding weight: 100 - 1200 gr Number of the pressing board: 2 Number of rollers: 4 Width of conveyor belt: 400 mm Width: 650 mm Length 1: 2350 mm Length 2: 1850 mm Length of pressing board(s): 630 + 450 mm Height: 1200 mm Height of dough entry: 1180 m ...

Manufacturer/manufacturer: Angel Typ/type: 330/75 HL - V Year/year: 1999 Control/controller: CC 100 Clamping force/clamping force: 750 kN Holmabstand/Dist.Betw.Tiebars: -. Disk size/platen size: 660 mm x 560 mm WZ height/mould hight: min 200 mm Opening/opening stroke: 450 mm Plate distance of max/Max open daylight: 650 mm Auger/screw size: 40 mm Stroke volume/shot volume: 201 cc spec. Spritzdr / injection pressure: 1600/2180 bar General / General Engine power: 15 kW Heating/heating power: 9.2 kW Dimensions/dimensions: 3.8 m x 1.3 m x 2 m Weight/weight: 4900 kg Screen text/language: German/English Additional equipment/additional equipment Core puller / core pulling: x 1 Robots / robotic interface

Manufacturer/manufacturer: Battenfeld Typ/type: BA 2000-1000 BK Year/year: 1999 Control/controller: CC 100 Clamping force/clamping force: 1100 kN Holmabstand/Dist.Betw.Tiebars: Disk size/platen size: 730 mm x 600 mm WZ height/mould hight: min 250 mm Opening/opening stroke: 500 mm Plate distance of max/Max open daylight: 750 mm Auger/screw size: 50 mm Stroke volume/shot volume: 251 cc spec. Spritzdr / injection pressure: 1300/2050 bar General / General Engine power: 18.5 kW Heating/heating power: 9.2 kW Dimensions/dimensions: 4.8 m x 1.4 m x 2 m Weight/weight: 6000 kg Screen text/language: German/English Additional equipment/additional equipment Core puller / core pulling: x 2 Robots / robotic interface

X-AXIS STROKE: 840 MM Y-AXIS STROKE: 860 MM Z-AXIS STROKE: 840 MM TABLE SIZE: 630 X 630 MM TABLE CAPACITY: 1,200 KG SPINDLE POWER: 30/25 KW ROTATION SPEED: 12,000 RPM ATTACHMENT: BT 50 NASOMANDRINO/PALLET DISTANCE: 50-810 MM SPINDLE-PLANK DISTANCE: 150-990 MM TOOL WAREHOUSE: 120 STATIONS MAX. WORKPIECE HEIGHT: 1000 MM CONTROL: MSG-502 YEAR OF BUILD: 2002

X-AXIS STROKE MM 2,400 Y-AXIS STROKE MM 960 AXLE STROKE Z MM 800 TABLE SIZE MM 2600X900 ATTACK: BT50 SPEED ROTATION REVOLUTIONS/MIN 12,000 TOOLS N ° 30 FANUC 31I MODEL A CONTROL YEAR: 2012

X-AXIS STROKE: MM 1,600 Y-AXIS STROKE: MM 810 Z-AXIS STROKE: MM 630 TABLE SIZE MM 1,750 x 770 ATTACK: ISO40 SPEED ROTATION REVOLUTIONS/MIN 15,000 REFRIGERATION THROUGH THE SPINDLE TOOL N ° 50 CONTROL: SELCA YEAR: 2008

DURMA VN 2006 hydraulic corner notching machine was built in 2016. The machine, equipped with state-of-the-art solutions and reliable components, is designed for machining workpieces made of plain and alloy steel with a maximum thickness of 6 mm. The machining process is performed on a robust, machined table with T-slots for fast and accurate tool positioning. Thanks to the automatic adjustment of the blade, high quality of material notching is achieved with the correct gradation and straightness of the cutting edge. The cutting angle is adjustable from 30° to 140° using knobs located on both sides of the machine. The three upper and four lower hydraulic cylinders in turn ensure that accurate and repeatable notching is achieved. The VN 2006 corner notching machine weighs 950 kg. Technical specifications of the DURMA VN 2006 corner notching machine - maximum workpiece thickness (60 ...

Muller Martini Perfect Binding Line, Equipped With: Gathering Machine: Muller Martini Type 1571, 12 Stations, Plus Hand Station, Trasnfer Element / Reject Gate Müller Martini 3641, Transfer Element To Binder Müller Martini 3643. 94.02359, MONOSTAR with 18 Clamps, Milling and Notching Station, Hot-Melt Spine and Side Gluing with Pre-Heating Tank, Stream Cover Feeder, Pressing Station, Conveyor Belts to Trimmer. Three Knife Trimmer: Muller Martini Merit 3671 (1998), Muller Martini 3631 (1998) Stacker Delivery, Mechanical Speed: 5,000 Cycles/Hour, Format: Min. 100x140mm, Max. 420x305mm, Book Thickness: Min. 3mm, Max. 60mm, Cover Width (Open): Min. 203mm, Max. 642mm.

YEAR 2012 STROKES X, Y, Z: 800X610X600 MM SPINDLE DISTANCE TABLE 150-720 MM FAST 36 M/MIN SPINDLE BT40 RPM 10,000 (12,000) RPM 30-SEATER TOOL WAREHOUSE CNC FANUC 18I-MD CHIP EVACUATOR ADDUCTION AT HIGH PRESSURE SPINDLE CENTER N ° 2 REVOLVING TABLES WITH ROTATING COUPLING FOR HYDRAULIC CONNECTIONS WITH LOCKING EQUIPMENT.

OKUMA MACHINING CENTER MODEL: MX-60HB TABLE: 630X630 mm X-AXIS STROKE: 1000 mm Y-AXIS STROKE: 810 mm Z-AXIS STROKE: 800 mm TOOL WAREHOUSE: 150 SEATS CONTROL: OSP-E100M

Key data: 1025 mm, 1540 , 1090

Machine type: EVP 550 Manufacturer: ERBA Power kW: 4.0 Total volume: 585 lt. Description: The EVP 550 vibratory finishing machine from ERBA has a flat work container base without separation. Emptying or separation is carried out via bottom emptying (manual/pneumatic). It has a fully automatic PLC process control (optional) and, on request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely variable by means of a frequency converter (optional). The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. If you are interested, we look forward to hearing from you. We will be happy to advise you without obligat ...

HORIZONTAL MACHINING CENTER NR. 2 KITAMURA HX500I WITH FATESYSTEM SHUTTLE Features: X-AXIS STROKE: 870 MM Y-AXIS STROKE: 710 MM Z-AXIS STROKE: 660 MM 4TH AXLE (ROTARY TABLE): 0.001-360 ° TABLE: 500 X 500 MM MAX PERMISSIBLE LOAD ON THE BOARD: 800 KG SPINDLE CONE: ISO50 ROTATION SPEED: 12,000 RPM GAMMA CHANGE: 2 GEAR RANGES FAST FEEDS: 50,000 MM/MIN TOOL CHANGE KITAMURA 1:100 SEATS TOOL CHANGE KITAMURA 2:50 SEATS CONTROL: FANUC 16 iM SHUTTLE FASTEM SYSTEM TO 16 STATIONS

Key data: 2300 mm, 2026 , 1615

Machine type: EVP 1500 Manufacturer: ERBA Power kW: 11 Total volume: 1500 lt. Description: The EVP 1500 vibratory finishing machine from ERBA has a flat work container base without separation. Emptying or separation is carried out via bottom emptying (manual/pneumatic). It has a fully automatic PLC process control (optional) and, on request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely variable by means of a frequency converter (optional). The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. If you are interested, we look forward to hearing from you. We will be happy to advise you without oblig ...

Machine type: YE 60 Manufacturer: ERBA Power kW: 0.3 Total volume: 50 lt. Description: The ERBA separation line YE 60 is used to separate workpieces and grinding medium. This can be used as a stand-alone machine or in combination with other machines, such as the ERBA Turbo (centrifugal power system). The separation floor can be changed quickly and easily depending on the requirements. Optionally, a frequency converter can be installed, which enables the infinitely variable adjustment of the motor speed. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. If you are interested, we look forward to hearing from you. We will be happy to advise you without obligation.  ...

OKUMA MACHINING CENTER MODEL: MA-400HA TABLE: 400X400 mm Nr. PALLET: 2 X-AXIS STROKE: 560 mm Y-AXIS STROKE: 610 mm Z-AXIS STROKE: 625 mm ATTACK: HSS63 TOOL WAREHOUSE: 60 SEATS CONTROL: OSP-E100M

PLUNGE EDM MACHINE AEG 443 B C AXIS X-AXIS STROKE: 1000 MM Y-AXIS STROKE: 600 MM Z-AXIS STROKE: 500 MM

Key data: 350 mm, 1470

Machine type: Turbo 60 Manufacturer: ERBA Power kW: 3.0 Total volume: 60 lt. Description: The ERBA Turbo 60 is a centrifugal system for deburring, smoothing and shining small to medium-sized workpieces. The machine has a digital process timer, as well as a digital speed display. The platter speed can be adjusted by means of a frequency converter. The Turbo 60 is available in dry and wet versions. It can be linked to the separation section listed below. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. If you are interested, we look forward to hearing from you. We will be happy to advise you without obligation. The European Commission provides a platform for ...

- Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 50 mm - Threading in steel ST 60 to M 42 - Drilling spindle holder MK 4 - Drilling spindle stroke 200 mm - Drilling spindle speeds infinitely adjustable 60 – 1100 rpm - Right - Counterclockwise rotation - 3 feeds 0.1 / 0.16 / 0.25 mm/rev - Projection 350 mm - Max. distance between drilling spindle – table / base plate 790 / 1210 mm - Table with 2 T-slots 630 x 540 mm - Height adjustable via rack with hand crank - Drive 400 V / 1.8 / 3.5 kW - Space requirement approx. W 600 x H 2050 x D 980 mm - Weight approx. 650 kg - with: - Emergency stop button - - Lighting - keyless chuck 1 - 13 mm - Coolant device - Machine vise - various 20 pcs HSS – Twist drill bits 8 – 20 mm

CDL VERT. DAHLIH MODEL: DL-MCV 610 X-AXIS STROKE: 520 mm Y-AXIS STROKE: 330 mm Z-AXIS STROKE: 460 mm TABLE SIZE: 760 x 330 mm SPINDLE SPEED: 5,000 RPM FAST SPEED: 32 m/min ATTACO: BT 40 TOOL NUMBER: 16 CONTROL: FANUC 10M