We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,303 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Used Lid Caper CMI, Type: TA 1 PP Brushless - the machine was used for twist-off glasses - can be used almost for any type of vessel - new conveyor belt with motor - incl. some new format parts - Compressed air is required - Power: up to 35 vessels /minute - El. Connection: 400 V, 50 Hz, 3.5 kW - Net weight: 1,200 kg Viewing and test run are possible by arrangement.
used
REF-0 SOMME 323 CAN SEAMER WITH 5 HEADS AND VACUUM FILLING SYSTEM 20 VALVES Automatic tin can seaming machine with 5 seaming heads. Fitted with a 20-valve vacuum filling unit. Manufacturer: SOMME Model: 323 Can size: Ø 73mm (easy-open lids) Overall dimensions: length 3,400mm, width 2,800mm, height 2,200mm
used
Technological data: Capacity: • 0.15l, 0.25l 65,000 cans/hour • 0.33l 50,000 cans/hour • 0.5l 37,000 cans/hour Year of construction 2014 Filling and packaging technology 1. Container pusher PRESSANT UNIVERSAL 1A 2. Empty can inspector CANTRONIC 709 D 3. Can filling machine VOLUMETIC VODM-C2.160-72-94 4. Control equipment CHECKMAT731 FM 5. Foam cleaning 6. Disposable packaging machine VARIOPAC PRO TFS-9 7. Pallet loader MODULPAL 1ADR 8. Pasteurizer LINAFLEX LC23.6-523-31 9. Container transport SYNCO S 10. Control equipment CHECKMAT 731 FM-X 11. Container transport MULTICO S 12. Pallet transport PALCO S – Loader division 13. Pallet transport PALCO S – area pusher Technology 14. Beverage processing technology CONTIFLOW 30 / 6. 15. CIP system VARIOCLEAN AUT-5,000L, 30 m3/hour Information technology and communication technology 16. Network/Hardware Technology 17. LDS (product ...
used
Set of 2 motorized tables designed for the packaging or handling of food products (preserves). Built in 3-4.5mm AISAI-304 stainless steel. The characteristics of the tables are as follows: each table consists of two stainless steel work areas measuring 500mm wide x 7000mm long, a lower ribbon and an upper Intralox blue 450mm wide x 7000mm long and two intermediate ribbons one on each side of the table with appointment Intralox blue measures 220mm wide x 7000mm long. Each belt can be adjusted speed independently. The control panel made of stainless steel AISAI-304 1.5mm, IP65. External measurements of each table 7000mm long x 1560mm wide x 1120mm high, table height 720mm is to develop the work sitting on stools. It includes stools built in stainless steel and approved for work in food. Capacity of workstations is: 7 people on each side of table x 4 sides = 28 people.
used
Waldner Dosomat 12.6 filler and sealer for foil trays. Currently set up for using 82mm diameter foils for meat paste like pate or pet foods. Machine is in lovely condition and available for inspection.
used
REF-0 BOSCH SIZE-GRADING MACHINE FOR SWEETS/CANDY Model: 165 A Serial no.: 28857 Year: 1980 Dimensions: length 1,600mm, width 900mm, height 1,800mm.
used
REF-2258 ANGELUS 60L AUTOMATIC CAN SEAMER WITH 6 SEAMING HEADS AND 24-VALVE VACUUM FILLING MACHINE Automatic can seamer with 6 seaming heads. Manufacturer: Angelus. Model: 60L. Can size: ø73mm. Complete with a 24-valve vacuum filling system (the vacuum pump is included). Overall dimensions: width 2,400mm, length 4,000mm, height 2,600mm.
used
REF-2259 SOMME DIANA-363-VAC AUTOMATIC CAN SEAMER WITH 6 HEADS AND SOMME 21-VALVE VACUUM FILLING SYSTEM Automatic tin can seaming machine with 6 seaming heads. Fitted with a 21-valve vacuum filling unit. Manufacturer: SOMME. Model: Diana-363-VAC Output: 12-15,000 Cans/ hour Can size: Ø 73mm. Overall dimensions: length 4,200mm, width 2,000mm, height 2,200mm
used
REF-2260 SOMME FORTUNA-363 AUTOMATIC CAN SEAMER WITH 6 HEADS, CLINCHER AND 18-VALVE SOMME VACUUM FILLING SYSTEM Automatic can seaming machine with 6 seaming heads and clincher. Manufacturer: SOMME. Model: Fortuna-363 Fitted with a SOMME 18-valve vacuum filling unit. Can size: Ø 73mm. Output: 18,000 Cans/ hour Overall dimensions: length 5,500mm, width 1,800mm, height 2,300mm
used
Can filler KHS / Ferrum type filler: Innofill EMD type seamer: F 708 G suitable products: beer, CSD, etc. with 76 mechanical filling valves and 8head seamer can type: 211 / 202 standard can capacity: 42.000 cph by 330 ml can 36.000 cph by 500 ml can year of manufacturing filler: 1995 year of manufacturing seamer: 1994 electric: Siemens S 5
used
REF-2085 HARD CANDY COOKER WITH VACUUM SYSTEM Manufacturer: Otto Haensel Hannover Model: Sucromat 4T. Serial no.: 17040057. Date of manufacture: 09/1977. 380V, 50Hz, three-phase, 7.0kVA, 24VAC. Dimensions: 1,400mm width, 1,850mm length, 2,200mm height.
used
CAN axis motor -Type: PSE 4225 DP-M -Dimensions: 175/115/H65 mm -Weight: 2 kg
used
Filling/Seaming machine for carbonated drinks. Filler has 32 filling heads and seaming machine has 6 heads. Seaming machine FERRUM includes lids feeder "ROTOFEEDER" Speed of the machine is 15000 CPH/500 ml. Lids 202 Machine will be reconditioned in 2023
used
Technical data packing press / can press / metal sheet press: Manufacturer unoTech GmbH Type UPAXX 70 Year of manufacture 2019 Operating hours approx. 3,000 hours Pressing force 700 kN at 315 bar Filling opening chute 420 x 1,250 mm (d x w) Channel cross-section (package dimension) 350 x 500 mm (h x w), length depending on material Drive power 30 kW Connected load 40 kW Power consumption, total 70 A Throughput capacity for empty beverage cans with: one pressing stroke approx. 1.7 t/hour two pressing strokes approx. 2.5 t/hour Achieved compaction approx. 1200 kg/m³ Hydraulic oil tank capacity 850 l Press dimensions built up 8,000 x 1,600 x 2,500 mm (l x w x h) Transport weight press approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355 Material properties: According to the manufacturer, this machine is suitable for pressing tin ...
used
For sale is a used cantilever rack Ohra. Condition very good. Columns H8140mm two-sided - 5 pieces load capacity stand 11360kg per side Level: feet + 10 Cantilever = 1200mm IPE 140 (load capacity 1420 kg) Price 10.500 € net Delivery possible throughout Europe. Available 24 stands and 400 cantilever arms If you are interested, please contact +48601553406 or biuroregalux.pl
new
Automatic feeding system for cans, glasses, bottles. Separation of single containers and automatic orientation to the conveyor of filling station. - Specifications: Speed: up to 80 containers/min | diameter of table: 1.000mm | 380V, 0,18kW | machine weight: 50kg | dimensions: L1400xW1200xH1200mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
used
PET/Can Baler, Special Baler BTS-MF60hd The BTS-MF60hd Dosen_PET special baler is ideal for compacting difficult and hard materials such as plastics, cans, PET and much more. The press impresses with its ease of use and large filling volume. The finished bales can be easily removed from the baler with the automatic bale ejector. - Compact bales weighing up to 70 kg - Crimps a variety of different materials such as PET bottles, beverage and food cans, paint cans, cardboard and plastic - Cross-tying ensures a secure hold of the material in the bale - Fully automatic bale ejection - Maximum safety standards - CE certified - Quality product Made in Europe Press force: 13 t Motor: 2.2 kW 16 Amp Power supply: 220-230 V (1 phase) Machine dimensions (H x W x D): 2144 x 1267 x 1328 mm Transport height: 2144 mm Machine weight: 706 kg Cycle time: 24 seconds Noise: 68 dB Bal ...
used
Wrap-around labeller for: Bottles Cans Jars Flacons Manufacturer: Newman, Model NV2 Inline used, good condition, from ongoing production. Suitable for cylindrical and slightly conical products. Easy format changeover. up to 80 products / min Dimensions: approx. 4500 x 1100 x 1600 mm Stainless steel DataSensor Weight approx. 500 kg Location: Near Stuttgart
new
CARRAGARM RACK NEW Data: H : approx. 416 cm D : approx. 137 cm L : approx. 402 cm Cantilever : approx. 120 cm Axial distance : 131 cm NEW GOODS immediately from stock. 500 kg load per arm 2250 kg load per stand Stand in hot-dip galvanized. Cantilever in hot-dip galvanized. Arms are screwed. Arms adjustable in 100 mm grid. Levels: feet + 3 storage levels (4 storage levels) Shelf consists of: 04 x stand, incl. stand approx. 416 cm made of IPE160. 12 x cantilever arms approx. 120 cm made of IPE 80 incl. all necessary fasteners and screws. Why BLT cantilever racks ? Certified German manufacturer DIN EN 1090 - Made in Germany All specified load capacities of the rack stands and cantilever arms are statically verifiable, at 100% load. All racking systems are supplied in hot-dip galvanized design. They can therefore be installed inside and outside and do not rust like pain ...
used
We sell here a can sealing machine from the manufacturer Lanico, type V 10 A in a good used and functional condition. The machine runs on 400 volts, 0.55 kW, for 70 and 99 cans, workshop tested, immediately ready for use, dimensions W/D/H 50/50/157 cm, others on request.
used
American can sealer 4 heads for 4 diameters. From Coca Cola small cans until 20 cm diameter High up to 45 cm high This machine was used with the following size r=10 cm, h= 18,2 cm for 500 gr of roast coffee. Shipping possible IMPORTANT: Watch out for scams happening on Resale: don't reply emails that are not coming from the seller especially those offering a discount from the advertised price without previous discussion, don't do open requests on resale because everybody will see your data and this is where the scam is starting, try to speak with the seller by phone before purchasing, always verify that bank details are matching with the invoicing company and VAT number, reports any email looking like this: "we can offer you a 20% discount due to stock streamlining.") Copy paste this URL link to see the machines listing: abcs://abc.resale.info/angebotelink-user.php?myid=56090 ...
used
Tevopharm Pack 6 Flowpack for candies Used machine visible in Italy, sold as it is
used
JAR SEAMER, SOMME MODEL: DIANA 383, ROUND FORMAT Technical description: Format: ? 83,7 mm No. of heads: 8 Power supply: 380-440V/50-60 Hz Dimensions: 3600 x 1600 x 2000 mm
used
Vacuum converter (vacuum bridge) for moving cans to remove lying cans from the production flow Capacity: 30000-40000 cans/h
used
Hop Cannon Braukon HopGun 325 liters – 2014 Good condition hop cannon for dry hopping, also referred to as cold-hopping, made by German BrauKon in year 2014. Hob volume 325 liters and it has been used for hopping beer in 150hl fermenters. Dry hopping is a procedure where essential oils are released from the hops pellets to cold, unmature beer by circulating beer from fermenters through a hop cannon. It provides better efficiency and quality, reduced dissolved oxygen (DO) levels in the finished product, and a safer working environment for the brewers. Once pellets are loaded in, air gets purged out with CO2/N2. Beer is pumped into the cannon under pressure, the hops pellets are caught in a whirlpool of sorts inside the cannon vessel and dissolve to create a pungent slurry. This mixture of beer and hops is then pumped from the hop cannon back to the fermentation vessel, and the b ...
used
A total of 73.75 linear metres will be charged. m double-sided cantilever racks 62 stands each 4.5 m high, , each stand 8 cantilever arms 1.2 m, max. Load 1,000 kg per cantilever arm; incl. accessories: spacers, diagonal stiffeners, fastening material Shelves were always in a warehouse;
Can filler and seamer KHS / SEN / Ferrum with 32 filling valves and 6head seamer Capacity: approx. 15.000 cph Filler and seamer will be complete reconditioned in our workshop including new electric control panel with PLC Siemens S 7 including Danfoss frequency inverter including beer pressure regulating valve including CIP dummies including CO2 injection before seaming and fixed for can type: 211 / 202 After reconditioning the filler and seamer will be in a condition like new.
used
Kettner Pressant 300 Masch-Nr. 92/56001 With accessories, intermediate layer lifter, pallet magazine and pallet transport. More images available. Kettner Pressant 300 Machine no. 92/56001 With equipment, layer pad remover, pallet magazine and pallet transport. More pictures available.
used
Cantilever racks SPECIFICATIONS Mast height: 4000 mm (blue) Truss length: 1200 mm or 1200+1200 mm (orange) Item 1 05 Supports 10 trusses Grid/round POSTS 2 07 Supports 14 trusses Grid/round Item 3 11 Double-sided supports (re-li) 44 trusses Grid/round Base 2600 x 30 x 30 mm Item 4 17 double-sided supports (re-li) 68 trusses Crossbars Base 2600 x 30 x 30 mm
used
Machine for sealing cans with lids, conveying speed: 0-30m/min, can dimensions: 80x300mm, connected load: 1kW.
used
Busbar trunking with cable, outlet box TELEMECANIQUE Canalis KS KSE02CD5 U: 660 V AC I: 25 A Cable length: 10 m Cable type: LAPP CABLE NEOFLEX 5G1,5 used, tested ! Dimensions ( packaging ): 400 x 400 x 120 mm
used
Busbar trunking with cable, outlet box TELEMECANIQUE Canalis KS KSA05CD5 U: 660 V AC I: 50 A Cable length: 35 m Cable type: USE HAR H07 RN-F 5G6 used, tested ! Dimensions ( packaging ): 750 x 550 x 200 mm
used
Busbar trunking with cable, outlet box TELEMECANIQUE Canalis KS KSE06SD5 U: 660 V AC I: 63 A Cable length: 13 m Cable type: GENERAL CAVI H07RN-F 5G16 used, tested ! Dimensions ( packaging ): 550 x 370 x 250 mm
used
Schenk filter housing 8-fold type 8/3 incl. candles Year of construction: 1983
used
Max. candle diameter: 50mm.
used
Max. candle diameter: 30mm.
used
Max. candle diameter: 30mm.
used
Max. candle diameter: 50mm.
used
Remote Controller, Machine Control, Regulator ESAB MTA1 CAN ( MTA1CAN ) 0459491880 New ! Dimensions: 280 x 55 x 55 mm
used
Sweat spray, 9 cans WÜRTH saBesto SWEAT SPRAY ÖKO Item no.: 0893 102 1 Content per can: 400 ml ( 0.4 l ) Other quantities on request ! New ! Dimensions ( can ): Ø 66 x 200 mm Dimensions ( packaging ): 280 x 210 x 220 mm
used
heavy-duty swivel castors PAGUS with parking brake wheel diameter: Ø 300 mm wheel width: 90 mm plate dimensions: 215 x 215 mm New Without brake S359 Dimensions: 400 x 400 x 340 mm Weight: 42 kg
used
Cantilever rack, one-sided, frame height 2.60m height, 80cm deep arms, 750kg per arm, hot-dip galvanized - new - : Price from location incl. loading! Price: 1.515.-€ (net) Price transport / packaging costs within Germany (without islands): 400.-€ (net)! Of course, you can also build longer or shorter shelving units out of them by omitting or buying additional frames (or also by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: German brand manufacturer, new product Description: - Shelf stand on one side 2,600 mm high, hot-dip galvanized - Base and arm depth 800 mm - With 3 height-adjustable shelf arms each - Load capacity at centre of gravity 400 mm - 750 kg per arm / 2..250kg per stand with 4 stands per arm level 4 x 750 kg = 3,000 kg P ...
used
DC Norris 160 Can opening machine Serial: 1827 2017, stainless, up to 300 cans as hour, can be adapted to open a wide range of cans from 60mm to 230mm, currently set for 150mm diameter can, with manual
used
Can filler and seamer Ortmann + Herbst Hansacan 30 / 5 Type filler: Hansacan with 30 filing valves, year of manufacturing: 1992, Type seamer: Ferrum F 505 G with 5 closing stations, Year of manufacturing: 2010 Yapacity: 21.000 cph by 330 ml standard cans - product beer Yapacity: 24.000 cph by 330 ml standard cans - product CSD Can type: 211 / 202 Electric system: Siemens S 7 with touch panel The filler and seamer are in an absolute top conditon and still in production in a European brewery until January/Februay 2024
used
used canning press / packaging press Manufacturer: WAGNER Type: WDSP 7000 Year of construction: 1993 specifications: Pressing force: 70 t Specific pressing pressure: 318 kg/cm² Drive power: 15 kW / 400 V Duct format: 550 x 400 mm Filling opening L x W: 1,150 x 550 mm Compaction chamber: 700 x 550 x 400 mm Total stroke: 2,100 mm Machine length: approx. 5,500 mm Machine width: approx. 1,920 mm Capacity: approx. 1.5 t/h (depending on material) Package size, WxHxL: 550 x 400 x 280 - 550 mm Package weight: approx. 20 - 40 kg (depending on the setting of the package length) Machine weight: approx. 3,500 kg
used
Ferrum can seamer, year of manufacture: 2005, type: F812-1, fitted to beverage can can lids 202. Ferrum Can Seamer, Year: 2005, Type: F812-1, adjusted to beverage cans, can lid 202, hight adjustable, canning line
used
Qty. 1 Second-hand filtration line Mfc.: Schenk, Anton Paar, Alafa Laval, Gross, Niwa, Pro-Wam Built: 1992 – 2014 Capacity: 250 hl/h
used
Pamasol 33200 Pneumatic Feeder With 1-lane output to the conveyor belt Accumulation conveyors ensure an even supply of product to a processing machine. - Hinge chain 150 mm wide - 8-lane, with 1-lane output - Drive with infinitely variable geared motor - Without central belt drive - Suitable for continuous operation in hazardous areas - Electric drive unit - Feeding table suitable for Centomat Specifications Capacity: Up to 3000 cans per day The output depends on the size of the can, the filling volume, the type of valve and the number of workers Cans: Ø 100-200 mm x H 50-200 mm, aluminium, tinplate and glass Electrical connection: 3 x 400 V + N + PE, 50 Hz Dimensions: H x W x L 88 x 140 x 290 cm Original price 57.000 ,-€ More items - new and used - can be found in our shop! International shipping costs on request!