can filling used for sale

Building width 9 m Length 18 m Height 6.2 m Wind zone 1 Snow Load Zone 2 Monopitch roof inclination 10 degrees.

paint can vacuum cabinet; cleaned and tested; suitable for paint cans up to 2.5 kg; new windscreen; Incl. Colour stirrer Easymix. Color can vacuum cabinet; cleaned and checked; used for cans till 2.5 kg; new front panel; incl. Ink mixer Easymix.

Cantilever rack for light loads, single-sided, frame height 2m, shelf length approx. 3m, 50cm deep arms, 200kg per arm, hot-dip galvanized - new product - : Price ex location incl. loading: only 895.-€ (net), plus packaging and freight. Price per additional stand: 225.-€ (net) Price for transport on request! Manufacturer: Bruckamp Year of manufacture: New Type: Super Lightweight Set components: 4 stands with 5 arms / 3 panels with connections Stand distance: approx. 1m Total length of construction area: approx. 3m Shelf height: 2m Foot and arm depth: 500mm Robust construction – made from an IPE 100 with firmly welded arms at a distance of approx. 330mm. Load capacity per stand: 1,000kg Payload per arm: 200kg Incl. ground anchor Incl. stress shield Description: 4 stands with 1 m axial dimension as a set incl. screws. Key benefits: Easy to assemble  ...

A total of 40 copper dragee pans from the manufacturers Pefa and Lichtenberg are available. Material: copper, diameter: 950mm, motor power: 0.8kW. An on-site inspection is possible.

Offer 25521 Double-sided long goods – cantilever rack without contents Technical data: - 2-sided cantilever rack consisting of 10 uprights with plug-in system - Height-adjustable bearing arms - 130 bearing arms - Stand height approx. 6000 mm - Wide stands + support arms approx. 1600 mm - max. arm load approx. 400 kg - Max. drawbar load per support approx. 5000 kg - Center distance of the shelf parts connected to diagonals approx. 1.0 m - Grid spacing for the reg arm - Height adjustment 125 mm - Arm dimensions: L 700 x W 90 x H 70 mm - Stand dimensions W 220 x H 150 mm - Weight per post approx. 400 kg - Weight per arm approx. 10 kg

Racking hall consisting of cantilever racks and pallet racks, OHRA, floor area approx. 867m2 – used - : Price from location: 99.500.-€ (net), for self-dismantling! Price for disassembly on request. For an extra charge, the material for closing a gable side is also available! Manufacturer: OHRA Year of construction: 2019, the sheets 2021 Dimensions of the hall: Width approx. 17.35m Length: approx. 50m Height: Shelf approx. 6,385mm Height ridge approx. 7.10m After dismantling, one long side of the hall is open (where it now stands at the existing hall) Cantilever rack: 2 rows of 25 double-sided frames = a total of 50 pieces of cantilever rack frames double-sided Arm length: 1.20m Arm Load: 1,400kg Load center of gravity: 600mm Stand load per side: 4,200kg Wheelbase: 2m Arms are plugged in Arms with load deflector, device for roll-off protection Incl. palle ...

A 3-compartment filter housing is sold On request and for an extra charge with new filter elements

8-fold cartridge filter housing with new filter elements on request for an extra charge

Pneumatic can opener, make Edlund, type 625 M, powerful compressed air operated lid punch, (crown punch),, industrial can opener for large cans,, self-sufficient can opener for industrial use,, Output: approx. 2,000 cans per day, Characteristics:, completely made of stainless steel, for thorough cleaning can be hosed down from top to bottom, IP 65,, Suitable for opening cans of almost any size thanks to the height adjustability, Two - hand - operation, Compressed air requirement: 56.6 l / min at 6 bar,, format range:, minimum box height: 40 mm,, max. box height: 300 mm,, max. can diameter: 230 mm,, Info:, - Existing punching crown for can diameter 153 mm, - Additional punching crown optional, - With magnetic lid remover

New device!, completely made of stainless steel, for a daily output of up to 200 cans, suitable up to can diameter: max. 157 mm and max. can height: 266 mm, capacity: approx. 6-10 cans/min, opens cans with a single manual movement, no sharp edges ( burr ) on the can.

New device!, O Opens cans with a single manual motion, O Powerful manual lid punch (Crown Punch), O Recommended for a daily output of up to 200 canisters/day., O No sharp edges on the can due to the use of half-stump knives., O For extra large containers (custom-made tools required. Available separately), completely made of stainless steel, suitable up to can diameter: max. 230 mm and max. can height: 328 mm, Power: approx. 6-10 cans/min,

Gastro Table - Can Opener / Industrial Opener / 60 cmâ Product Descriptionâœ" Item Condition: New and Packedâœ" Manufacturer: SCHNEIDER GmbHâœ" Material: Stainless Steelâœ" Length: 600 mmâ Details see pictures

Cantilever racking, heavy-duty racking -without insert trays: none available -Double-sided -consisting of: -Shelf: with 3 uprights each, height 5.4 m -Support arms, double-sided: 500 mm long -Brack load capacity: 795 kg -Load capacity per side: max. 7000 kg -screwed -Number: 4 shelves available -Price: per piece -Empty weight: 1250 kg/piece

Cantilever rack, heavy duty rack -Manufacturer: Gemac, cantilever rack base field double-sided -Cantilevers: 5 per side -Compartment height: 33 cm -perm. Load: 200 kg per cantilever arm / 1000 kg total. see nameplate -Quantity: 12x shelves available -Price per piece -Dimension: 1315/1210/H2000 mm -Weight: 98 kg/piece

Cantilever rack, heavy-duty rack -Cantilever rack: base field double-sided, 2 uprights -Cantilever arms: 4 per side, length 500 mm -Compartment height: variably adjustable -Quantity: 2x shelves available -Price per piece -Dimensions: 1180/1195/H2960 mm -Weight: 139kg / 140kg

Cantilever rack, heavy-duty rack -Manufacturer: LBE, cantilever rack base field double-sided -Cantilever arms: 5 levels per side, length 500 mm -Compartment height: variably adjustable -Load capacity: 1-sided 630 kg, see photos type plate -Quantity: 1x shelf available -Dimensions: 1300/1180/H1985 mm -Weight: 80 kg

Cantilever racking, heavy-duty racking, single-sided cantilever racking, pallet racking -Manufacturer: Bito, cantilever rack one-sided base bay type KR29 L height 1980 mm -Stands: 4 pieces 1980/605/55 mm grid 60 mm adjustable -Cantilever arm length: usable depth 500 mm / 29 pieces -Load capacity per cantilever arm, max. 175 kg, see photo type plate -Cross braces: 6 pieces 1060/140/60 mm -Transport dimensions: 2100/760/H150 mm -Total weight: 180 kg

CAN SEAMER SOMME, MODEL: 444, ¼ CLUB FORMAT Technical description: With protective fairing Throughput rate: ± 80/90 Jars/min Power supply: 380-440V/50-60 Hz

A Makat depositing and cooling line for hard candies is available. Working width: 530mm, mold cavity arrangement: 2 rows, cavities per row: 19, total cavities per mold: 38, max. stroke rate: 25/min, production capacity 4.5g: approx. 400kg/h, product weight: 2.5g/4.5g, total line dimensions X/Y/Z: approx. 10500mm/1500mm/2300mm. Documentation available. An on-site inspection is possible.

An FMI separating machine for can production is available. Production capacity: approx. 500cans/min, diameter range: 52mm-99mm, height range: 40mm-85mm. An on-site inspection is possible.

A Borden beading machine for metal can production is available. Can diameter range: 211mm/603mm, can height range: 300mm-700mm. Documentation available. An on-site inspection is possible.

A beader, flanging and beading machine for cans by Metal Box Company is available. Can type: 3-piece cans, can shape: round, tool diameter: 150mm, max. can height: 180mm, performance range: 70-280cans/min. An on-site inspection is possible.

A mechanical Karges-Hammer eccentric press for series production in can manufacturing is available. Ram stroke: 75mm, flywheel speed: 80rpm, motor power: 3HP, speed: 294rpm. An on-site inspection is possible.

A mechanical Karges-Hammer eccentric press for series production in can manufacturing is available. Ram stroke: 75mm, flywheel speed: 80rpm, motor power: 3HP, speed: 294rpm. An on-site inspection is possible.

Teikoku Canned Motor Pump BA61 Manufacturer: Teikoku Electric Mfg. Co., Ltd. (Japan) Sales: AxFlow AB, Stockholm, Sweden Model / Type: BA61-116J4BL-050611V-F Serial Number: FC-1236A-2 Date of manufacture: July 2010 Performance data: Lifting height: 50 m Flow rate: 18 m³/h Frequency: 50 Hz Voltage: 400 V Power: 11 kW Current: 23 A Number of poles: 2 Degree of protection: IP65 (IEC 60529) Operating mode: S1 (continuous operation) Ambient temperature range: −15 °C to +40 °C Location: Kusel

A sheet metal blank feeding press Alfons Haar for metal can production in the packaging industry is available. Press force: 40t, stroke: 170mm, max. speed: 180rpm, drive power: 18.5kW, cutting circle diameter: 400mm, max. drawing depth: 55mm, max. sheet dimensions X/Y: 1150mm/1000mm, material thickness range: 0.1mm-0.5mm, throughput: approx. 520cans/min, machine dimensions X/Y/Z: approx. 8950mm/4500mm/3900mm. An on-site inspection is possible.

STERITECH Industrial Autoclave / Food Sterilizer (Diameter 1,300 mm) for canned goods, jars and packaged food products., With heat exchanger, with cooling water - System., For sale is a used horizontal high-performance autoclave from the French manufacturer STERITECH S.A., specifically designed for thermal sterilization and pasteurization of foods in cans, jars, and other pressure-resistant packaging., The system is ideally suited for:, - Canning industry, - Fine food and convenience production, - Pet food, - Soups, sauces and ready meals, - Vegetable and meat canned goods, - Glass, bowls and can packaging, The autoclave has a usable volume of approx. 5.520 liters and is equipped with a PLC/touch control. The machine operates in steam mode or steam/water spray mode and ensures uniform heat distribution for safe and reproducible sterilization processes., The present TÜV inspection certif ...

Söderhamn chipper canter line, Consisting of, - Log infeed with step feeder, - Log transport with infeed, - Soderhamn chipper canter 240-15, - Outfeed conveyor, - Merry-go-round conveyor system, - Electric cabinets and control units, - Chip and waste conveyor system

Four-station filling system for large cans and bottles., Additional title: Siphon filler, Capacity: 200 Fl/h, Filling places: 4 pieces, Power: 100 W, Voltage: 230 V, Frequency: 50 Hz, Length: approx. 1,3 m, Width: approx. 0,75 m, Height: approx. 2 m, Formats: 5 l Party cans; 2 l siphon bottle, Features: The containers are pressurized before filling, CIP pipes

Used complete CSD canning line 2018 - 24.000 bphTechnical Specifications & Performance DataThis complete CSD canning line is a second hand, used bottling line configured for aluminum cans and engineered for reliable beverage production. Manufactured by ZhongChen, the line is designed to deliver consistent quality for carbonated soft drinks at industrial packaging scales. It features a comprehensive equipment set from mixing through downstream wrapping, enabling smooth, continuous operations.Production Speed: 24,000 bphContainer Type: Aluminum cansAvailable Volume Range: 0.33LProduct: CSD (carbonated soft drinks)Build Year: 2018 (major equipment)Main Equipment: Mixer, Filling Machine, Can Seamer, Can Rinser, Can Warmer, Shrink Wrapper, Depalletizer, Conveyor System, COP SystemManufacturer: ZhongChenAdvanced Automation & Control SystemsThe line is arranged for synchronized operation across ...

New Can Sealer 60 heads 30.000 cph Machine type: Can sealer. Year: 2018. Rotary heads: 60. Output: 30,000 cph on 330 ml cans. Electrical: 400V, 50Hz, Power: 16 kW. Available with : 70 HEADS Production per hour: 45.000 90 HEADS Production per hour cans: 60.000 1 – ADVANTAGE OF THE SYSTEM This rotary system applies a polyethylene stretch film directly on the can at line speed, supporting high-throughput can bottling machinery applications while protecting product contact areas. Protects hygiene of the can on the top rim and lateral body. Dry application without glue or heat. Permits drinking directly from the can after application. Improves product presentation and qualitative image. Maintains standard can stacking and palletizing. Watertight to allow immersion. Suitable for warm distributors up to 60°C. Compatible with traditional multipack systems. Enables decoration/customization for ...

Technical Specifications & Performance Data The PakTech CCA 120 is a compact, high-reliability can holder applicator designed to apply plastic carriers to beverage cans with consistent accuracy. As part of a used bottling line or canning line, this second hand unit brings proven PakTech engineering to industrial packaging environments seeking dependable multipack presentation. Manufacturer: PakTech Model: CCA 120 Year: 2016 Machine type: Can Holder Applicator Nominal speed: up to 120 cans per minute (format and line conditions dependent) Container types: Aluminum beverage cans Formats: Compatible with common PakTech carrier styles and multipack configurations (subject to tooling and kit; verify in manuals) Dimensions: Width 2440 mm, Length 1230 mm, Height 1500 mm Electrical: 220V Safety features: Integrated guarding and protections Documentation: Manuals available Advanced Automation & C ...

Automatic labeling machine for top and bottom labeling of cans and jars. The system is designed for precise and efficient labeling in industrial production environments. Output: up to 120 labels/min.

Overview This complete automatic can filling line has a nominal output of approx. 20,000 cans/hour for 330 ml cans (can type 211/202), packed 24 cans per foil-shrunk tray. The core is an O+H / KHS Hansacan filler with 30 filling valves, mechanically blocked to a Ferrum F 505 G seamer with 5 seaming heads. Empty cans are supplied by a TMG Impianti Vega 120/B depalletizer and rinsed on a Hysek Rinsstar 20000 rinser before filling. A date/coding printer is not included. Technical data Line type: Complete automatic can filling line Nominal output: approx. 20,000 cans/hour (330 ml), product- and temperature-dependent Container: 330 ml can, can type 211/202; 24 cans per foil-shrunk tray Controls: PLC Siemens S7, Siemens SIMATIC HMI Warmer and drying station reconditioned; fill-height control and packaging machine new Equipment Can Depalletizer | TMG Impianti | Vega 120/B | tier-sheet removal,  ...

PRESSTATION KBW1593 WITH SCHOTT SYSTEM FOR SALE OR RENT! Technical data: Pressing force: 33 t/330 kN; Filling opening: 1,760 x 1,885 mm; Pressing chamber opening: 1,475 x 1,880 mm; Year of production: 2009 Electrical technical parameters: Power: 5.5 kW; Electrical connection: 5 x 2.5 mm² - CEE - plug 32 A; Duration of one working stroke: 55 sec. PRESSTATION CAN WE OFFER WITH 1 OR 2 BOXES.

Max. bay load: 1800 kg Max. shelf load: 450 kg Throat depth: 330 mm Auction-ID: A7-49089-376

Radius: 1200 mm Max. bay load: 2000 kg Max. shelf load: 1000 kg Auction-ID: A7-49089-518

Radius: 1000 mm Max. bay load: 3000 kg Max. shelf load: 1000 kg Auction-ID: A7-49089-522

Complete beer clarification plant, comprising the following main components: - Diatomaceous earth cartridge filter (Filtrox, 1979) with a capacity of 27.1 hl and a filter area of 26.62 m². Diatomaceous earth filter based on the Twin Flow system. The diatomaceous earth filter has recently undergone a complete mechanical and electrical overhaul and has been fitted with additional measurement technology. - Cartridge membrane filter (H&K, 2011) with 24 filter cartridges and a filtration capacity of 200 hl/h - 2 trap filters - Buffer tank for unfiltered wine (Gross, 1979) with a volume of 61.5 hl - Buffer tank for filtered wine (Gross, 1979) with a volume of 10 hl - PVPP dosing vessel (1981) - Diatomaceous earth dosing vessel (1979), Additional title: Kieselguhr filter Twin Flow System, Filtration capacity: 200 hl/h, Filter area: 26 m², Max. operating pressure: 9 bar, Filter Cartridges: 135 ...

Second-hand, double-sided, freestanding cantilever racking designed for the storage and organised retrieval of long goods and materials. The structure is suitable for professional use in warehouses and industrial premises. Technical data: Length: ~ 6,000 mm Arm: 650 mm Height: 3,000 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

Diesel, capacity 480 lt, never used Overall dimensions: 1000 x 800 x 700 mm Weight: 40 kg Auction-ID: A7-49495-407

Set including an industrial cantilever rack, a material trolley and a large stock of metal material. The set includes different sections of profiles, tubes, flats, round bars and other materials intended for mechanical, welding, locksmithing or metal construction work. This configuration makes it possible to immediately have a reserve of material that can be used for manufacturing, maintenance or industrial subcontracting. Ideal for: Mechanical workshops locksmith Boilermaking Industrial maintenance Metal construction Construction companies The racking also allows for efficient organization of the length storage. Auction-ID: A1-48554-231

Diesel, capacity 220 lt, never used Overall dimensions: 900 x 700 x 700 mm Weight: 30 kg Auction-ID: A7-49514-183

Diesel, capacity 220 lt Overall dimensions: 900 x 700 x 700 mm Weight: 30 kg Auction-ID: A7-49495-323

Diesel, capacity 220 lt Overall dimensions: 900 x 700 x 700 mm Weight: 30 kg Auction-ID: A7-49514-11

Diesel, capacity 220 lt, never used Overall dimensions: 900 x 700 x 700 mm Weight: 30 kg Auction-ID: A7-49514-78

Diesel, capacity 480 lt, never used Overall dimensions: 1000 x 800 x 700 mm Weight: 40 kg Auction-ID: A7-49514-158

Diesel, capacity 220 lt, never used Overall dimensions: 900 x 700 x 700 mm Weight: 30 kg Auction-ID: A7-49514-261

Diesel, capacity 220 lt Overall dimensions: 900 x 700 x 700 mm Weight: 30 kg Auction-ID: A7-49495-255

Diesel, capacity 480 lt, never used Overall dimensions: 1000 x 800 x 700 mm Weight: 40 kg Auction-ID: A7-49514-49