can filling line used for sale

Inv. Num. : 6788 Type: GN1406TM Producer: GN Canada Created: 2016 Parameters: Equipment: Refrigeration unit EURO CHILLER GC A 015 Extensions for plastic coffee mats (80 mm) Moulding area: 320 mm x 150 mm Drawing depth (negative): 120 mm Drawing depth (positive): 25 mm Sheet width: 380 mm Material thickness range: 0.25mm-1.2mm Material roll diameter: 1000 mm Drying cycles per minute: maximum 45 Machine dimensions: 2400 mm x 1750 mm x 2050 mm Machine weight: 1000 kg After overhauling the main shaft and the motor, the machine is

Used pastry line CANOL, type: Canolino 5.2 -in bakery condition- - Calibration unit -Filler - Cutting station - Folding device -Guillotine - various tools Viewing and test run are possible by arrangement.

Used extruder CANOL, type: RON 1/380 -in good condition- - 380 mm roller width - Condition: Very good, ready for immediate use Viewing and test run are possible by arrangement.

Cut-off band saw Canali Type: HBSG Saw roller diameter 1000 mm Cutting height approx. 500 mm Motor approx. 11 kW hydraulic feed table incl. some saw blades well-functioning condition

Two-station machine for canister 4 x 5 ltr. Extruder S 100. Double and triple heads with 250 mm center to center. Clamping force 196 kN. With view strip extruder, cutting edge, removal robot, conveyor belt. Maquire mixer, refrigeration unit. Very few operating hours

Description: HIGH-PRESSURE FOAMING MACHINE CANNON A-COMPACT 200 FC Possible discharge rate up to 2,600 g/s at a mixing ratio of 1 : 1 (polyol: isocyanate) Tank group Component tank, volume 250 litres Agitator on the polyol tank One mixing head type Cannon FPL 24 HP Hydraulic unit, volume 75 litres with heat exchanger Hose line polyol, isocyanate, hydraulics up to interface A  ,Motors with frequency inverter Dosing unit with two Cannon axial piston pumps, 55 cm3/rev Magnetic coupling on the isocyanate pump Touch screen control panel SIEMENS TP 177 6' SIEMENS S7 control system CHILLER ,FRIGOSYSTEM RACA/C 30 Capacity 2000 l/h Dimensions 800x600x1200 mm Approx. Onsite Dimension. (l x w x h): 3,000 x 2,000 x 2,000 mm, weight approx.: 3,000 kg

Description: HIGH-PRESSURE FOAMING MACHINE CANNON A-COMPACT 200 FC Possible discharge rate up to 2,600 g/s at a mixing ratio of 1 : 1 (polyol: isocyanate) Tank group Component tank, volume 250 litres Agitator on the polyol tank One mixing head type Cannon FPL 24 HP Hydraulic unit, volume 75 litres with heat exchanger Hose line polyol, isocyanate, hydraulics up to interface A  ,Motors with frequency inverter Dosing unit with two Cannon axial piston pumps, 55 cm3/rev Magnetic coupling on the isocyanate pump Touch screen control panel SIEMENS TP 177 6' SIEMENS S7 control system CHILLER ,FRIGOSYSTEM RACA/C 30 Capacity 2000 l/h Dimensions 800x600x1200 mm Approx. Onsite Dimension. (l x w x h): 3,000 x 2,000 x 2,000 mm, weight approx.: 3,000 kg

General SKU213W138 LocationBarneveld MakeQuadro Comil Type196 No.196-1316 Year of construction2006 Main Features MaterialStainless steel Motor7.5 KW Specified Features - Sieve granulator Granulating sievecheck Conical granulating sievecheck Rotor sizes110 mm, 280 mm Sieve sizes310x190 mm Sieve perforation1 mm With hoppercheck Inlet250 mm Outlet350 mm Motor400 volt, 7,5 kW With variable speed drive95-1000 rpm / 0-1800 rpm MaterialStainless steel Information Mounted on stainl. st. framecheck Mounted on wheelscheck With switchcheck Weight490 kg CEcheck Floor space1,50 x 0,9 m Total height1,65 m ATEX compatiblecheckNew arrivalsSieve granulatorsQuadro CanadaNew arrivalsSieves > Sieve granulatorsBrand > Quadro Canada What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination wo ...

1x self-adhesive labeling machine Cirio & C. / Canelli, Italy, as rotary machine with 3 stations, up to 3,500 bph., used, built in 1994, type: Rotativa A.L.9, running direction: left-right, front and back label + neck loops + award points are possible, format parts for: 0.2 + 0.275 + 0.33 + 0.5 + 0.75 + 1.0 ltr. Bottles are included, in working condition at a special price: €2,900 plus VAT from stock Dolgesheim

Description: From DIN A3 to DIN A5 Approx. Onsite Dimension. (l x w x h): 750 x 600 x 1,200 mm, weight approx.: 70 kg

Description: 5,705 KWp New solar modules 2x Canadian Solar CS3L-360MS, 1x Longi LR4-60HPB-360M, 1x Jolywood JW-HD120N-380, 3x Denim M2B375BT620H, 2x Longi LR4-60HPH-375M, 3x Risen RSM40-8-390MB, 3x URECO FBK400MFD solar modules packed ever 15 solar modules on a pallet. Pallet NO. 3 Nominal power per solar module: 360 Wp - 400 Wp Condition of solar modules: New Logistical data solar modules: 1,770 mm x 1,048 mm x 35 mm, 1,754mm x 1,037mm x 34mm, 1,756mm x 1,038mm x 35mm, 1,754mm x 1,037mm x 35mm, 1,254mm x 1,038mm x 35mm, 1,750mm x 1,095mm x 30mm, 1,722mm x 1,133mm x 30mm Logisticdata: Dimensions pallet: approx. 1,850 mm x 1,200 mm x 675 mm Weight pallet modules: approx. 332 kg Total weight: 332 kg Total packages: 1 Illustration similar. Approx. Onsite Dimension. (l x w x h): 1,850 x 1,200 x 675 mm, weight approx.: 332 kg

Description: 6,235 KWp New solar modules JA-Solar JAM60S02-300/PR, Canadian CS3L-375MS, Trina TSM400DE09.08, Trina TSM-390DE09.05, Canadian CS6R-400MS, Phono-Solar PS400M6H-18NH solar modules packed with 16 solar modules each on a pallet. Pallet NO. 5 Nominal power per solar module: 365 Wp - 400 Wp Condition of solar modules: New Logistical data solar modules: 1,668 mm x 1,050 mm x 35 mm, 1,764mm x 1,047mm x35mm , 1,753mm x 1,095mm x 30mm , 1,754mm x 1,096mm x 30mm , 1,754mm x 1,096mm 30mm , 1,721mm x 1,133mm x 30mm , 1,720mm x 1,132mm x 30mm Logisticdata: Dimensions pallet: approx. 1,850 mm x 1,200 mm x 740 mm Weight pallet modules: approx. 359 kg Total weight: 359 kg Total packages: 1 Illustration similar. Approx. Onsite Dimension. (l x w x h): 1,850 x 1,200 x 740 mm, weight approx.: 359 kg

Description: The foaming machine described below is designed for foaming sandwich elements. PRODUCT Panels for cold rooms DIMENSIONS Length x width max. 2,400 x 1,350 mm min. 600 x 180 mm Thickness: 40 ... 120 mm CAPACITY Press type: 2 + 2 Press table dimensions: 6,500 x 1,600 mm Number of press tables: 4 pieces , Occupancy of press table: 1 piece Extension of pressing tables: 60 sec Curing time / dwell time in the press: 15 - 45 min Occupancy rate: 0.9 Shifts: 2 pieces , Working time per shift: 8 h Panels per shift: 48/72 pieces Depending on foam thickness and raw material GROUND DATA (this set-up) Mixing ratio: 100 : 140 (polyol : isocyanate) Dosage - max: 1100 g/s per mixing head Specific gravity: Polyol 1.0 Isocyanate 1,2 Density: 45 - 60 kg/mÑ Start time: 20 sec (Other raw material data can of course be used for other applications) SYSTEM COMPONENTS Componen ...

Can filling line capacity: 12.000 cph by 330 ml slim line cans - can type: 202 / 200 product: carbonated water and optional for flavoured still water year of manufacturing: 2017 consisting of: 1. Empty can depalletizer CFT 2. Empty can inspection HEUFT 3 Empty can cable conveyor CFT 4. Empty can Rinser CFT 2-channel rinser 5. Can filler CFT with 24 filling valves and 4 head seamer 6. Full can inspection HEUFT 7. Fault can reject HEUFT 8. Full can conveyors CFT 9. Tray Shrink Packer SMI to shrink the following formats: 4 x 3 = 12 can/pack 6 x 4 = 24 can/pack 10. Carbonator CFT 11. Inkjet coder Videojet The line is in a very good technical condition.

Output: 35000 // Valves-Filling Heads: 50

Can Filling Line Wild Goose 3000 cph for Various Beverages – 2021 Excellent condition can filling line for beer, cider, cocktails, kombucha, wine and other beverages. The line consist of Zomerdink depalletizer with incorporated can rinser, Wild Goose Evolution 5 series filler-seamer block, Inline Filling Systems roll fed labeller for self adhesive labels and date coding, buffer table, semi-automatic Framax carton box erector-sealer and flexible roller conveyor for full carton boxes. Wild Goose patented seaming and filling technology has five filling time adjusted volumetric filling tubes and one head seamer with two seaming rolls. System has air pre-evacuation with CO2 before filling and after mechanical foam removal, full can tops are flushed with CO2 before placing a lids. After seaming, there is an outside can rinsing system with water. Filling process is fully automatic, contro ...

Complete canning line for beer - capacity 30'000 cph - 0,33 and 0,50 lt.

1 of used canning line for 150-/200/250 ml slim cans. Most equipment new 2001, various other equipment later added. Main items are: depalletizer, empty can conveyors, twist-rinser, CSW lid feeder, Krones carbonator, Krones Volumetic 72-valve filler with Ferrum 8-head seamer, VBS nitrogen dosing system, Heuft level detector, SMB double-deck pasteurizer, aiirknives, KHS/Kisters shrinkpacker, KHS/Kisters trayshrinkpacker, palletizer and stretchwrapper. Originally supplied to fill beer, fruit juice (witih pulp) and soft-drinks including energy drinks. Available for immediate dismantling.

Can Filling Line for Beer and CSD, Automatic MITCAB 2000 cph – 2023 Complete can filling line with depalletizer equipped with 300ml can rinser, fully automatic filling block with an overpressure filler with 12 filling heads, one head can seamer and CO2 air pre-evacuation system built in filling nozzles, wraparound roll feed labelling machine for self-adhesive film labels with separate date coder, collecting table for manual packing of cans and intermediate can conveyors. The line is set up for 300ml standard and sleek cans and 500ml standard cans and designed for beer and carbonated soft drinks. Equipment was manufactured in 2023 and only tested, no commercial operation made. Technical Characteristics Producer MIDCAB Sweden Can sizes 330ml slim, 330ml standard, 500ml standard Capacity upto 1500 - 2000 cph Manufacturing year 2023 Operating hours Only tested, no commerci ...

Can filling line capacity: approx. 24,000 cph Filling Product: Soft drinks Can size: 330 ml and 500 ml standard cans Can Type: 211/202 consisting of: 1. Can depalletizer King with automatic can infeed system with Siemens S7 PLC including can table, pallet magazine, sheet removal system the depalletizer is fixed for the following pallet dimensions: 1.180 x 1.250 mm 2. Can rinser Transtech Hysek to rins new cans with filtered water infeed height: approx. 2,500 mm Outfeed Height: approx. 1,200 mm 3. Can filler and seamer KHS / Ferrum - Filler Innofill EMD 76 with 76 filling valves blocked with - Can seamer Ferrum type: F708G with 8 seaming stations the filler and seamer will be complete reconditioned in our workshop including new electric control panel with PLC Siemens S7 including Danfoss frequency inverter including beer pressure regulating valve including CIP  ...

Qty. 1 Second-hand can filling line Mfc.: KHS, FERRUM, NIKO, MEYPACK, ROBOPAC, MIP Zuk, OCME, Mettler-Toledo Garvens, BIELMASZ, LOGOPAK, PROMAG Built: 1990 – 2016 Capacity: 24,000 – 28,000 cans/h (500 – 550 ml) Operational Performance Indicator (OPI): 83.4% Consisting of: Depalletizer, Can rope conveyor, Can rinser, Filler, Seamer, Pasteurizer, Carton packer, Film wrapper & shrink tunnel, Palletizer, Pallet wrapper, Separating pad feeder, Full packer pick-up station, Pallet buffers, OCME packer, Tray weigher, Pallet pick-up and loading, Lid feeder, Fill level controller (x2), Pallet labeller, Lid lift PLC of the main components: Depalletizer Siemens S5 Can conveyors Siemens S5 Filler Siemens S5 OCME packer Siemens S7 Carton packer Siemens S7 Palletizer Siemens S5 Pallet wrapper Siemens S7

Qty. 1 Second-hand can filling line Mfc.: Transpak, Trantech Hysek, Arsopi, Krones, Pegas, Spolex, SMI, Kisters, KHS, Videojet, Ketner, Haloila, Interex, Schonau, Siemens (SSW) Built: 1991 – 2017 Capacity: 30 000 cans/h

Year issue: 2017 - new Capacity: 20,000 cph, complete stainless steel Product: energy drinks and juice Can: 250 ml. Type of can: 202/200 slim can Heating method: Steam - Plate heat exchanger in outside of pasteurizer Material: Stainless steel AISI 304 1. TECHNICAL CHARACTERISTICS OF THE PASTEURIZER Temperature of product (inlet temperature) in pasteurizer: 2? - +6? Temperature of product (outlet temperature) from pasteurizer: +27? - +30? Pasteurizing temperature: +72? - +75? Holding on pasteurizing temperature: 12.5 min Heat consumption (steam by 3-4 bar) during stable operation: 480-550 Kg/h Temperature of steam: +140? Water consumption during stable operation: 0.5 - 0.9 m3/h. Consumption of compressed air 6 bar: 500-700 nl/h Total power consumption: 30 kw Supply voltage: 3F/N/PE/A, 50Hz, Control voltage: 400 volts Degree of protection: IP-54  ...

New machine with 3 x 800 ltr. Tanks Heating system: with steam through heat exchanger The whole system is disigned to enalbe sterilzation and cleaning of filler without disassembly of parts or components Technical data: - Output pressure: 4 bar - Temperature of feed water: 15-20oC - Steam Pressure: 3 bar - Steam flow: 300 kg/h - Temperature of steam: 120-130C - Pressure of air: 6 bar - Installed electrical power: 4 kW

mounted on a stainless steel base frame due to the completely pneumatic control (without electrics) suitable for filling disinfectant, Piston stroke: 5 ltr. - that means two filling operations for one 10 litre canister capacity: approx. 150 - 10 ltr. canister / h

Can sealer Manufacturer: Ferrum Type: F 160 Built: 1992 Refurbished: Capacity: 3900-9600 doses/h infinitely adjustable Lid: 73 diameter Canned height: 50 - 190 mm

3000 cans / h

5 l can filler and 2 l bottle filler

REF-2261 AUTOMATIC CAN SEAMER SOMME NORA-313-VAC WITH VACUUM FILLING MACHINE 6 VALVES Automatic tin can seaming machine with 6-valve filling system Manufacturer: SOMME Model: NORA-313-VAC Can size: 3kg Output: 3,000 cans/ hour Vacuum pump dimensions: width 1,000mm, length 1,300mm, height 1,800mm Overall dimensions: width (including infeed belt) 3,600mm, length 1,900mm, height 2,000mm

REF-0 SOMME 323 CAN SEAMER WITH 5 HEADS AND VACUUM FILLING SYSTEM 20 VALVES Automatic tin can seaming machine with 5 seaming heads. Fitted with a 20-valve vacuum filling unit. Manufacturer: SOMME Model: 323 Can size: Ø 73mm (easy-open lids) Overall dimensions: length 3,400mm, width 2,800mm, height 2,200mm

Technological data: Capacity: • 0.15l, 0.25l 65,000 cans/hour • 0.33l 50,000 cans/hour • 0.5l 37,000 cans/hour Year of construction 2014 Filling and packaging technology 1. Container pusher PRESSANT UNIVERSAL 1A 2. Empty can inspector CANTRONIC 709 D 3. Can filling machine VOLUMETIC VODM-C2.160-72-94 4. Control equipment CHECKMAT731 FM 5. Foam cleaning 6. Disposable packaging machine VARIOPAC PRO TFS-9 7. Pallet loader MODULPAL 1ADR 8. Pasteurizer LINAFLEX LC23.6-523-31 9. Container transport SYNCO S 10. Control equipment CHECKMAT 731 FM-X 11. Container transport MULTICO S 12. Pallet transport PALCO S – Loader division 13. Pallet transport PALCO S – area pusher Technology 14. Beverage processing technology CONTIFLOW 30 / 6. 15. CIP system VARIOCLEAN AUT-5,000L, 30 m3/hour Information technology and communication technology 16. Network/Hardware Technology 17. LDS (product ...

REF-2258 ANGELUS 60L AUTOMATIC CAN SEAMER WITH 6 SEAMING HEADS AND 24-VALVE VACUUM FILLING MACHINE Automatic can seamer with 6 seaming heads. Manufacturer: Angelus. Model: 60L. Can size: ø73mm. Complete with a 24-valve vacuum filling system (the vacuum pump is included). Overall dimensions: width 2,400mm, length 4,000mm, height 2,600mm.

REF-2259 SOMME DIANA-363-VAC AUTOMATIC CAN SEAMER WITH 6 HEADS AND SOMME 21-VALVE VACUUM FILLING SYSTEM Automatic tin can seaming machine with 6 seaming heads. Fitted with a 21-valve vacuum filling unit. Manufacturer: SOMME. Model: Diana-363-VAC Output: 12-15,000 Cans/ hour Can size: Ø 73mm. Overall dimensions: length 4,200mm, width 2,000mm, height 2,200mm

REF-2260 SOMME FORTUNA-363 AUTOMATIC CAN SEAMER WITH 6 HEADS, CLINCHER AND 18-VALVE SOMME VACUUM FILLING SYSTEM Automatic can seaming machine with 6 seaming heads and clincher. Manufacturer: SOMME. Model: Fortuna-363 Fitted with a SOMME 18-valve vacuum filling unit. Can size: Ø 73mm. Output: 18,000 Cans/ hour Overall dimensions: length 5,500mm, width 1,800mm, height 2,300mm

Filling/Seaming machine for carbonated drinks. Filler has 32 filling heads and seaming machine has 6 heads. Seaming machine FERRUM includes lids feeder "ROTOFEEDER" Speed of the machine is 15000 CPH/500 ml. Lids 202 Machine will be reconditioned in 2023

Vacuum converter (vacuum bridge) for moving cans to remove lying cans from the production flow Capacity: 30000-40000 cans/h

4 heads can seamer - d 83mm change part -driven lfter -atmospheric - with automatic lubrication system for sale As-is or maintained up to 15.000 cans/hours

Complete Soudronic line for tin cans 50,2 mm. Include line for lids KRUPP. Speed - 500 cpm.

Overview This can filling line was in operation at a large German food company until last. The canning line is still assembled and ready for use. It is no longer in use as investments are being made in a new line.  Technical data  Capacity according to formats   150 ml Slim can - 18.000 cph  250 ml Slim can - 18.000 bph 330 ml Standard/ Sleek can - 15.000 cph  355 ml Sleek - 14.500 cph  500 ml Standard can - 11.000 cph  568 ml Standard can - 10.300 cph 900 ml King can  - 6.500 cph  Less than 3.000 operating hours  Carousel pitch circle diameter: 1,080 mm 24 filling valves Machine pitch: 141 mm  Single machines  Can Depalletizer | Krones | Pressant Universal 1A | 2020 Infeed at the bottom Discharge on top Includes safety fences, can conveyors, vacuum suction unit do identify damaged cans Empty Can Inspection | Krones | Cantronic 709 | 2021 Can Rinser | Meyer | Infeed Twiste ...

Overview This complete can filling line for CSD & Beer was manufactured 2012 by French company Sidel. The line is still set up but no longer in use. Techn. Details Capacity: 27,000 cans per hour Beverages: Carbonated soft drinks, Beer Can type/Lid: 330 ml with 202 super end double seam Components Sidel Sweep off A/Z empty can depalletizer Magnoni vacuum transfer Magnoni gravity rinser Sidel Starcan MS 50V filler Ferrum F 706G seamer Sidel Starblend D3 EX 0433 EX460 mixer Sidel ML 2.4.ST1 CIP tank (4000L) Sidel CWD35/144 pasteurizer Magnoni can dryer (after seamer) Magnoni can dryer (after coder) Sidel TSP3 SDI BW tray & shrink packer Manual palletising Rotoplat semi-automatic pallet wrapper Conveyors

Overview The can filling line was manufactured in 2021 and in use in a brewery in Spain. As the owner is now shifting his production to a contract bottler due to increased volume, this line is for sale. With the can filler and seamer, there comes a table to put the empty cans on, conveyors, an ENOS S5000 labeller with three stations for self adhesive labels and a discharge table. It is possible to use different can formats.  Plant in detail Filler + Seamer | TWIN Monkeys | CIMARRON | 2021  Capacity: up to 3.000 cans/ h  Formats: designed for 0,33l u. 0,44l  Length: 2.000mm Width: 875mm Height: 1.860mm Labeller | ENOS | S5000 | 2022 Capacity: 5.000 cans/ h Number of label stations: 3 Self-adhesive labels  Length: 2.850mm Width: 1.500mm Height: 2.000mm Weight: 450Kg Electr. connected load: 2 kW Scope of delivery Infeed table Conveyor  Outfeed table

Caramel candy production line, mono flavor. products: - Fruit candies (mono flavor) - Mint candies - Milk (fat-based) candies (same as Werther's Original) The line consists of: 1. Caramel cooker, TC&C Process designers 24" Schlangenkocher Producer: Snelders, Man. year 1997 SN: 96496, Capacity 1t/h 2. W&D forming line (Winkler & Dunnebier) Type 163.04 Man. Year 1997 SN 3671 Productivity 486 kg / h (homogeneous products weighing 5.2g) Control: Siemens Device dimensions: Length: 11.85 m Width: 1.9 m Height: 2.83 m Height of products output: 850-950 mm Energy consumption approx. 40 kW Form: Dimensions: 920x280x40 mm Number of forms in motion: 118 pcs. Number of products per mold: 240 Production speed: 6.5 forms / min Shape of the product: exactly like Werther's Original It is possible to present lines during work. Training is possible both at the locatio ...

For sale complete aerosol cans line.

Stock# UG6311 Second hand line for production caramel candies, mono flavour. Line can produce fruit taste candies, mint candies or milk (fat based). Reporting output up to 468 kg/h. Line consist of: - Caramel mass preparation section - includes caramel cooker TC&C Process designers 24" Schlagenkocher, manufactured by Snelders, new 1997. Working output up to 1000 kg/h. - Winkler & Dunnebier forming line type 163.04, new 1997. Reported output up to 486 kg/h. Forming section has dimensions: 920 mm x 280 mm x 40 mm. Forming dies in motion - 118 pcs. Number of candies per one mold: 240 pcs. Machine works with speed up to 6.5 molds per minute. Working dimensions: L 11.85 m x W 1.9 m x H 2.83 m. Final product discharged at height 850-950 mm. Power consumption 40 kW

Overview For sale is a canning line for filling beer and other carbonated beverages, such as CSD or Sparkling Wine. The line is still assembled and can be inspected. As production volumes have increased, the line is too small with its current output and is being replacing it with a larger line. Standard 330ml and 440ml cans were produced on the line. Technical data  Output: 2.160 cans/ h at 440ml  Designed for standard 0.33l & 0.44l cans; retrofit to other formats possible  Machines Can pusher and rinser | Zomerdijk Engineering | 2021 Air rinser with ionized air | 2022 Can filler and seamer | Wild Goose | Evolution | 2019 5 Filling valves Checkweigher | Zomerdijk Engineering | 2022 Labeling machine | Framax  With color printing coder Buffer table | 2019 Semi-automatic packaging machine | Zomerdijk Engineering | 2021 Formats: 24s; 2x12s

Canning line capacity: approx. 40.000 cans / h Filling product: soft drinks Filling temperature: approx. 13° C Can type: 330 ml sleek cans, can ends 202 consisting of: Depalletizer Kettner Year of manufacturing: 1983 Filler type Kontinental Year of manufacturing: 1988 Seamer Ferrrum Mixer Famix Year of manufacturing: 2007 Empty can inspector Year of manufacturing: 2006 Packer Kisters Year of manufacturing: 1982 Full can inspector Year of manufacturing: 2003 Palletizer Year of manufacturing: 1983 The line is still in production in South East Europe

Many thanks for your interest in our machinery, please find below our offer: manufacturer: Nuova Euromec, Italien Type: 2 PL S 66PRD Filling Pump for hard boiled candy YOM: 1994 output: up to 400 Lt./h Funnel Volume ca. 80ltr electrical: 400V 3 PH dimensions: 1200x1400x1500mm Wight: 135kg different: incl. 4x filling pipes for Liquid filling We offer this machine in 'as is' condition, without warranty ex Warehouse Hess. Lichtenau (EXW) unpacked

Sell 187 ml and 250 ml slim canning line A washer for empty cans A filler-seamer with Siemens touch screen control A liquid nitrogen doser with Siemens touch screen control A washer for full cans A dryer An industrial inkjet printer A sleever A thermal shrinkage tunnel with steam power plant A set of conveyors

General SKU251U333 LocationBarneveld MakePfaundler / DrM Fundabac TypeKolonne No.72506 Year of construction2005 Pressure Working pressure6 Bar Vacuum possiblecheck Main Features MaterialGlass Surface9.5 m2 Specified Features - Candle filter Candle filtercheck Notified bodyTÜV Filter surface9,5 m² Number of candles14 Solids outletDN400 Capacity1150Ltr. Vessel sizesDia:700x2900mm MaterialGlass - Enamel (WWG-9115) Information Mounted on framecheck Total height4,6 m Weight1050 kg CEcheck Floorspace1,0 x 1,0 m Extra SpecificationsFluid group 1, maximum allowable total weight in use 3500 kg, maximum allowable working pressure 01/+6 bar, maximum allowable operating temperature -25ºC/+200ºC, test pressure 10.5 bar. Valve material: 1.4462 (Duplex) and Teflon liner Filter material: polypropylene.Candle filtersPfaudler-werkeFilters > Candle filtersBrand > Pfaudler-w ...

for the production of pillow candies Power 10 - 250 kg/h, depending on type and size of the candies