can filler with used for sale

Used pastry line CANOL, type: Canolino 5.2 -in bakery condition- - Calibration unit -Filler - Cutting station - Folding device -Guillotine - various tools Viewing and test run are possible by arrangement.

Used extruder CANOL, type: RON 1/380 -in good condition- - 380 mm roller width - Condition: Very good, ready for immediate use Viewing and test run are possible by arrangement.

Cut-off band saw Canali Type: HBSG Saw roller diameter 1000 mm Cutting height approx. 500 mm Motor approx. 11 kW hydraulic feed table incl. some saw blades well-functioning condition

Used dosing unit CANOL, type: P10-E -in bakery condition- 2 pieces available - Built in 1998 and 2000 - Condition: Bakery condition, ready for immediate use - Number of nozzles: 1 piece -El. Connection: 400 V, 50 Hz, 037 kW Viewing and test run are possible by arrangement.

Two-station machine for canister 4 x 5 ltr. Extruder S 100. Double and triple heads with 250 mm center to center. Clamping force 196 kN. With view strip extruder, cutting edge, removal robot, conveyor belt. Maquire mixer, refrigeration unit. Very few operating hours

Description: HIGH-PRESSURE FOAMING MACHINE CANNON A-COMPACT 200 FC Possible discharge rate up to 2,600 g/s at a mixing ratio of 1 : 1 (polyol: isocyanate) Tank group Component tank, volume 250 litres Agitator on the polyol tank One mixing head type Cannon FPL 24 HP Hydraulic unit, volume 75 litres with heat exchanger Hose line polyol, isocyanate, hydraulics up to interface A  ,Motors with frequency inverter Dosing unit with two Cannon axial piston pumps, 55 cm3/rev Magnetic coupling on the isocyanate pump Touch screen control panel SIEMENS TP 177 6' SIEMENS S7 control system CHILLER ,FRIGOSYSTEM RACA/C 30 Capacity 2000 l/h Dimensions 800x600x1200 mm Approx. Onsite Dimension. (l x w x h): 3,000 x 2,000 x 2,000 mm, weight approx.: 3,000 kg

Description: HIGH-PRESSURE FOAMING MACHINE CANNON A-COMPACT 200 FC Possible discharge rate up to 2,600 g/s at a mixing ratio of 1 : 1 (polyol: isocyanate) Tank group Component tank, volume 250 litres Agitator on the polyol tank One mixing head type Cannon FPL 24 HP Hydraulic unit, volume 75 litres with heat exchanger Hose line polyol, isocyanate, hydraulics up to interface A  ,Motors with frequency inverter Dosing unit with two Cannon axial piston pumps, 55 cm3/rev Magnetic coupling on the isocyanate pump Touch screen control panel SIEMENS TP 177 6' SIEMENS S7 control system CHILLER ,FRIGOSYSTEM RACA/C 30 Capacity 2000 l/h Dimensions 800x600x1200 mm Approx. Onsite Dimension. (l x w x h): 3,000 x 2,000 x 2,000 mm, weight approx.: 3,000 kg

General SKU213W138 LocationBarneveld MakeQuadro Comil Type196 No.196-1316 Year of construction2006 Main Features MaterialStainless steel Motor7.5 KW Specified Features - Sieve granulator Granulating sievecheck Conical granulating sievecheck Rotor sizes110 mm, 280 mm Sieve sizes310x190 mm Sieve perforation1 mm With hoppercheck Inlet250 mm Outlet350 mm Motor400 volt, 7,5 kW With variable speed drive95-1000 rpm / 0-1800 rpm MaterialStainless steel Information Mounted on stainl. st. framecheck Mounted on wheelscheck With switchcheck Weight490 kg CEcheck Floor space1,50 x 0,9 m Total height1,65 m ATEX compatiblecheckNew arrivalsSieve granulatorsQuadro CanadaNew arrivalsSieves > Sieve granulatorsBrand > Quadro Canada What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination wo ...

1x self-adhesive labeling machine Cirio & C. / Canelli, Italy, as rotary machine with 3 stations, up to 3,500 bph., used, built in 1994, type: Rotativa A.L.9, running direction: left-right, front and back label + neck loops + award points are possible, format parts for: 0.2 + 0.275 + 0.33 + 0.5 + 0.75 + 1.0 ltr. Bottles are included, in working condition at a special price: €2,900 plus VAT from stock Dolgesheim

Description: From DIN A3 to DIN A5 Approx. Onsite Dimension. (l x w x h): 750 x 600 x 1,200 mm, weight approx.: 70 kg

Description: 5,705 KWp New solar modules 2x Canadian Solar CS3L-360MS, 1x Longi LR4-60HPB-360M, 1x Jolywood JW-HD120N-380, 3x Denim M2B375BT620H, 2x Longi LR4-60HPH-375M, 3x Risen RSM40-8-390MB, 3x URECO FBK400MFD solar modules packed ever 15 solar modules on a pallet. Pallet NO. 3 Nominal power per solar module: 360 Wp - 400 Wp Condition of solar modules: New Logistical data solar modules: 1,770 mm x 1,048 mm x 35 mm, 1,754mm x 1,037mm x 34mm, 1,756mm x 1,038mm x 35mm, 1,754mm x 1,037mm x 35mm, 1,254mm x 1,038mm x 35mm, 1,750mm x 1,095mm x 30mm, 1,722mm x 1,133mm x 30mm Logisticdata: Dimensions pallet: approx. 1,850 mm x 1,200 mm x 675 mm Weight pallet modules: approx. 332 kg Total weight: 332 kg Total packages: 1 Illustration similar. Approx. Onsite Dimension. (l x w x h): 1,850 x 1,200 x 675 mm, weight approx.: 332 kg

Description: 6,235 KWp New solar modules JA-Solar JAM60S02-300/PR, Canadian CS3L-375MS, Trina TSM400DE09.08, Trina TSM-390DE09.05, Canadian CS6R-400MS, Phono-Solar PS400M6H-18NH solar modules packed with 16 solar modules each on a pallet. Pallet NO. 5 Nominal power per solar module: 365 Wp - 400 Wp Condition of solar modules: New Logistical data solar modules: 1,668 mm x 1,050 mm x 35 mm, 1,764mm x 1,047mm x35mm , 1,753mm x 1,095mm x 30mm , 1,754mm x 1,096mm x 30mm , 1,754mm x 1,096mm 30mm , 1,721mm x 1,133mm x 30mm , 1,720mm x 1,132mm x 30mm Logisticdata: Dimensions pallet: approx. 1,850 mm x 1,200 mm x 740 mm Weight pallet modules: approx. 359 kg Total weight: 359 kg Total packages: 1 Illustration similar. Approx. Onsite Dimension. (l x w x h): 1,850 x 1,200 x 740 mm, weight approx.: 359 kg

Description: The foaming machine described below is designed for foaming sandwich elements. PRODUCT Panels for cold rooms DIMENSIONS Length x width max. 2,400 x 1,350 mm min. 600 x 180 mm Thickness: 40 ... 120 mm CAPACITY Press type: 2 + 2 Press table dimensions: 6,500 x 1,600 mm Number of press tables: 4 pieces , Occupancy of press table: 1 piece Extension of pressing tables: 60 sec Curing time / dwell time in the press: 15 - 45 min Occupancy rate: 0.9 Shifts: 2 pieces , Working time per shift: 8 h Panels per shift: 48/72 pieces Depending on foam thickness and raw material GROUND DATA (this set-up) Mixing ratio: 100 : 140 (polyol : isocyanate) Dosage - max: 1100 g/s per mixing head Specific gravity: Polyol 1.0 Isocyanate 1,2 Density: 45 - 60 kg/mÑ Start time: 20 sec (Other raw material data can of course be used for other applications) SYSTEM COMPONENTS Componen ...

Description: With a total of 6 shelves Projection: 300 mm, 400 mm, 500 mm, 600 mm, 700 mm and 700 mm Approx. Onsite Dimension. (l x w x h): 3,300 x 800 x 2,100 mm, weight approx.: 250 kg

Beer filler with KK

Egarpack Filler And Feeder Filler For Bottle 1 L Model: LLR 20 Production: 5,000 b / hour Number of nozzles: 20

Pastry filler / Berlin filler with 1 plunger NEW! Pastry filler / Berlin filler with 1 plunger for filling doughnuts or pastries5 liter bowl with lid made of stainless steel For details see picture

Pastry filler / Berlin filler with 2 flasks NEW! Pastry filler / Berlin filler with 2 plungers for filling doughnuts or pastries7 liter bowl with lid made of stainless steel For details see picture

Pastry filler / Berlin filler with 1 plunger NEW! Pastry filler / Berlin filler with 1 plunger for filling doughnuts or pastries5 liter bowl with lid made of stainless steel For details see picture

Sirman mobile piston filler, model: SRF-35V filler stand.35-L hydr.240V, serial number: 16L00534, year of construction: 2016/02, 240 V, 50 Hz, 2.3 A, 520 W, inside dimensions: ø 320 mm x 400 mm, total dimensions: 500 mm x 500 mm x 1200 mm.

Can filler KHS / Ferrum type filler: Innofill EMD type seamer: F 708 G suitable products: beer, CSD, etc. with 76 mechanical filling valves and 8head seamer can type: 211 / 202 standard can capacity: 42.000 cph by 330 ml can 36.000 cph by 500 ml can year of manufacturing filler: 1995 year of manufacturing seamer: 1994 electric: Siemens S 5

Can filler and seamer KHS / SEN / Ferrum with 32 filling valves and 6head seamer Capacity: approx. 15.000 cph Filler and seamer will be complete reconditioned in our workshop including new electric control panel with PLC Siemens S 7 including Danfoss frequency inverter including beer pressure regulating valve including CIP dummies including CO2 injection before seaming and fixed for can type: 211 / 202 After reconditioning the filler and seamer will be in a condition like new.

Can filler and seamer Ortmann + Herbst Hansacan 30 / 5 Type filler: Hansacan with 30 filing valves, year of manufacturing: 1992, Type seamer: Ferrum F 505 G with 5 closing stations, Year of manufacturing: 2010 Yapacity: 21.000 cph by 330 ml standard cans - product beer Yapacity: 24.000 cph by 330 ml standard cans - product CSD Can type: 211 / 202 Electric system: Siemens S 7 with touch panel The filler and seamer are in an absolute top conditon and still in production in a European brewery until January/Februay 2024

Fully reconditioned can filling machine for soft drinks and beer. Machine housing sandblasted and repainted. All seals and parts subject to wear new. Pneumatics and Electronics new (Siemens S7) Canned format: according to customer wishes upto o, 5 l

Vario can 15-3 capacity: 6,000 cans/h - 0, 33 ltr. Cans with 15 filling valves and 3 head can seamer between filler and seamer is a Co2 injection the filler is for beer and softdrinks suitable for both 330 ml and 500 ml can size can type standard 211/202 pneumatic: Festo CE regulation filling valves: electronic control pre-metering valve CIP tulps included PLC: Siemens new machine So available: Vario can 20-6 capacity: 9,000 cans/h - 0.33 ltr. Cans with 20 filling valves and 6head seamer Vario can 32-6 capacity: until 15,000 cans/h - 0.33 ltr. Cans With 32 filling valves and 6head seamer Video!

mounted on a stainless steel base frame due to the completely pneumatic control (without electrics) suitable for filling disinfectant, Piston stroke: 5 ltr. - that means two filling operations for one 10 litre canister capacity: approx. 150 - 10 ltr. canister / h

Volumetric filler with 21 filling valves and 4head Sima seamer capacity: 10.000 cph

Cat. No. 12-1080 in very good condition Measurements and Weight: LxWxH: 820 x 34 x 90 cm Weight: 38 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

fat baking plant Delivery time: 2 weeks Cart/Trolley: 1 loader/Kipptrögel: 10 Total length without storage: 1280 mm Total height: 1075 mm Total width: 820 mm Total length with tray: 2350 mm Total weight: 220 kg Volt / heart: 3 x 400 V / 50 Hz Power supply: 8.6 Capacity: 60 PCs Oil capacity: 67 ltr. Capacity of the trolley: 600 PCs. depending on the weight Operating instructions: german Description Digital display for the oil heater digital display for the fermentation Chamber button for lifting the basket button for lowering the basket

Table drilling machine Ixion without base from a training workshop Type BT15STP stepless speed control via PIV gearbox Hoehen adjustment via rack, Speeds from 200rpm to 3,600rpm Flott Alzmetall Maxion Gillardon Special price

Nominal rating 1000 kg/h Motor rating 0,37 (0,5) kW (PS) Connected load 230V 50Hz (single-phase) Electrical protection 16 A Length 2500 mm Width 700 mm Height 2100 mm Discharge height 800 mm Weight 150 kg Material 1.4301 / AISI 304 Connection for cleaning ½\" inside Connection for washing vessel 1½\" outside Height fruit outlet 1750 mm ; new machine - top condition

Oil mist separator complete device Air output 1100 m3/h Flow temperature 5-45 C° Engine 1.45 kW-230/400V 50 Hz

Pull-off trolley with pull-off machines for floor ovens metrics: 250cm Long 60cm Wide 182cm high

Directional plate made of cast ironDimensions: 1500 x 1000 x 210/40 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

tiltable electromagnet clamping plateClamping area: 900 x 200 mmHeight: 65/105 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Directional plate made of cast ironDimensions 4000 x 1200 x 300/40 mmWithout feedusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

T-slot platen made of cast ironTechnical specifications:Length: 1200 mmWidth: 1000 mmSolid thickness: 60 mmRibbed thickness: 150 mmWith- 6 longitudinal T-slots 26/16 mm- baseused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Cast iron plateTechnical specifications:Length: 1200 mmWidth: 800 mmSolid plate thickness: 50 mmRibbed panel thickness: 150 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Cloth Puller Oven Schiesser Pull-off Cup NEW 160/180cm Stove Depth -Aluminium cloth pull-off board furnace slider NEW -with undercoat -for 160 / 180cm depth -Pullers are 194cm long -with stainless steel trolley on 4 swivel castors -External dimensions of the carriage: 206x61cm and 182cm high

Two belt conveyors without drives. Good condition. Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the National Court Register, under KRS number No. 0000874432, NIP 6912552442, share capital: PLN 2,560,000.00 (paid in full).

Industrial robot Yaskawa GP 25 Year of manufacture: 2019 Number of axes 6 Loading capacity 12 kg Max. Working range 2,010 mm Repeat accuracy 0.03 mm Weight 260 kg Power supply 2 kVA S-axis 210 °/s L-axis 210 °/s U-axis 220 °/s R-axis 435 °/s B-axis 435 °/s T-axis 700 °/s Mounting options ceiling, wall, floor Very good condition!

Pullers Cross Extractors Furnace Shooter 160cm - Cross cloth pullers - We have 3 pieces in stock - For settling bread and rolls - Made of stainless steel - On wheels Dimensions stainless steel trolley : W: 176cm D: 72 H:186cm Puller dimensions: : W: 162cm D: 61.5cm For details see pictures

Hydr. Flat-form scissor lift table FLEXLIFT FLUNDER type 1500 / 100 (without hydraulic power unit)Year of construction 1991 Nominal load capacity 1500 kg Lifting capacity (practically tested) 1000 kg (at approx. 350 bar)Platform size 2100 x 1400 mm Stroke max. 930 mm Construction height - bottom 100 mm (with installation frame) Construction height - top 1030 mm Hydr. Operating pressure 350 bar = lifting capacity 1000 kg Hydraulic engine power 1.5 kW Mains connection 400 volts, 50 Hz - mechanical-hydraulic safety limit switches stop the lowering process when the safety strip is actuated - without hydraulic power unit - without electrical control Length of mounting frame 2270 mm Width of installation frame 1580 mm Height of installation frame = height below 100 mm Dead weight Lifting table 500 kg good condition; used

Bottom cover without hook DEMAG hoe holder: Ø 20 mm Mounting: 15 x 15 mm New ! Dimensions: 85 x 85 x 67 mm

Chemical standard pump, centrifugal pump without motor, water pump, chemical pump FINDER POMPES HC50315N Q: 30,0 m3/h H: 30.0 m n: 1450 rpm shaft diameter: Ø 32 mm, shaft length: 80 mm groove width: 10 mm input: Inner diameter: Ø 85 mm Flange diameter: Ø 132 / 203 mm bolt circle diameter: Ø 160 mm hole diameter: Ø 17,5 mm Output: Inner diameter: Ø 50 mm Flange diameter: Ø 98 / 165 mm bolt circle diameter: Ø 125 mm hole diameter: Ø 17.5 mm Material (pump housing): Stainless steel ( 1.4408 ) used, tested ! Dimensions: 645 x 425 x 505 mm

Pump without motor PROCON STANDEX 10268 V0415 New ! Dimensions: 100 x 100 x 100 mm

Positive displacement pump without motor, Rotary pump, Food pump, Chemical pump FRISTAM PUMPEN FKFN 40 Maximum discharge pressure: 12 bar Maximum flow rate: 8.5 m3/h Maximum speed: 600 rpm connection: DN50 connections: milk thread RD78 x 1/6 installation length: 305 mm Base plate: 475 x 400 mm motor bracket: 206 x 124 mm hole spacing: 164 x 90 mm 4x threaded hole: M10 x 1.5, depth: 20 mm coupling for shaft diameter: Ø 25 mm Shaft length: 50 mm Groove width: 8 mm Material: stainless steel (pump, base plate ) used, tested ! Dimensions: 625 x 400 x 300 mm

Welding table, straightening table, straightening flap, work table, clamping table Straightening plate PAGUS 1000 x 800 mm without feet Dimensions: 1000 x 800 x 250 mm