can filler with used for sale

System for filling 10 liter PET canisters. The canisters are filled onto two platform scales. Automatic fine weighing and shutdown. Compressed air operated

used baler Manufacturer: UNOTECH Type: UPAXX 70 Year of Make: 2022 specifications: Press force: 700 kN Specific pressing force: up to 450 N/cm² Channel cross-section (h x w): 350 x 500 mm Filling opening (l x w): 1,250 x 420 mm Main pump drive power: 30 kW Performance under operating conditions: - At 85 kg/m³ bulk density in 1-stroke operation approx. 1.7 t/h - At 85 kg/m³ bulk density in 2-stroke operation approx. 2.5 t/h Package density for tin cans: up to 1,200 kg/m³ Machine weight depending on equipment: 9.5 t Operating voltage: 3 x 400 VAC / 50 Hz / N / PE Machine has slight fire damage and will be completely repaired if the order is placed.

Product description (Item no. KAR251) 1 covered cantilever racking system with canopy and rear wall as well as available drainage Total length: approx. 83 linear meters. Make: OHRA System: Cantilever arm 60 one-sided design Year of Make: 2015 galvanized version 50 Pieces Stand Stand height: 6,000 (5,740 + 273) mm 50 Pieces Feet Foot length: 2,800 mm Profile: 273 x 136 mm Column load per side: 1,500 kg/ max. approx. 100 pieces arms 2 = pieces per stand Type: K60K Arm length: 2,500 mm Profile: 140 x 75 mm Arm load: 500 kg/ max. Load centre of gravity: 1,250 mm Wheelbase: approx. 1,500 mm with cross bandages and arm bridges between the cantilevers 3 pieces per box Profile: 82 x 47 mm Length: 1,400 mm Rising roof arms Length: 3,500 mm Profile: 120 x 65 mm Webs Length: approx. 1,350 mm Profile: approx. 82 x 47 mm Condition: used Full ...

123

SIKO IF09C/1 - 0002 Interface converter for CAN bus, Jagenberg Diana Pro. Used, tested. Gateway modules for connecting SIKO sensors and displays to standardized fieldbus systems. There are three bus connections available. SIKO offers a specific transmitter for each connection. Up to 31 subscribers can be connected to the Profibus or CAN bus via the RS485 interface.

Remote controller, machine control, regulator ESAB MTA1 CAN ( MTA1CAN ) 0459491880 New ! Dimensions: 280 x 55 x 55 mm

Heavy duty swivel castors PAGUS with parking brake wheel diameter: Ø 300 mm wheel width: 90 mm plate dimension: 215 x 215 mm plate thickness 18 mm distance (hole center-hole center) 175 mm New ! Without brake S359 Dimensions: 400 x 400 x 340 mm Weight: 42 kg

Manufacturer: Kragarmregal, Type: Profillagerregal, Regalart: Einseitig, Regallänge mm: 5000, Anzahl Ständer: 6, Lagerebenen: 4, 1stupright frame pieces Qty.: 6, 1stheight mm depth mm: 2500, 1.Transverse beam length mm: 1 X 900,

Manufacturer: Kragarmregal, Type: Profillagerregal, Regalart: Einseitig, Regallänge mm: 5000, Anzahl Ständer: 6, Lagerebenen: 4, 1stupright frame pieces Qty.: 6, 1stheight mm depth mm: 2500, 1.Transverse beam length mm: 18 X 900,

Manufacturer: Kragarmregal, Type: Profillagerregal, Regalart: Doppelseitig, Regallänge mm: 5000, Anzahl Ständer: 6, Lagerebenen: 4, 1stupright frame pieces Qty.: 6, 1stheight mm depth mm: 2500, 1.Transverse beam length mm: 2 X 900,

Unused, complete automatic filling system with heating tank and conveyor belt. manufacture Danish Candle Machinery. Intended for wax-based candle production, but can be used for many other types of filling work. Everything made to order in 2021 in Denmark. Supplied with instructions and EU declaration of conformity. Filling system for filling five units at a time • 1 x 6 kW / 3 x 400 v • Pump, pump bracket, hose • The nozzles are replaceable and come in sizes ø2, ø4 and ø6 mm Heating tank 2000 liters • Heating element: 1 x 9 kW / 3 x 400 v / 30 - 110 ° C • Dimensions: 220 x 120 x 134 cm • Inner and outer tank in stainless steel • Insulation cover in galvanized steel • Lid in aluminum Conveyor • Motor-driven and sensor-controlled • Dimensions: 5 x 0.5 m Find more here - /

Manufacturer: unbekant, Regalart: Kragarmregal, Regallänge mm: 4000, Nutztiefe mm: 600, Ständerabstand mm: 1000, Anzahl Ständer: 11, Lagerebenen: 4, 1stupright frame pieces Qty.: 4, 1.Transverse beam Qty.: 24, FREE TEXT: ca 128 Arme,

Manufacturer: Kragarmregal, Year: 1998, Regalart: Doppelseitig, Height mm: 4200, Anzahl Ständer: 36, Lagerebenen: 3 pro Seite, 1stupright frame pieces Qty.: 36, 1.Transverse beam Qty.: 216, 1.Transverse beam length mm: 1800, Stacking places: 4 pro Seite, FREE TEXT: Preis für 3 Ständer inkl. 18 Querriegel 2000 Euro, Year :1998

A canister filling system for the food industry is available. Dosing system: piston dosing unit, container: 80l, dosing cylinder: V4A, control: Knorr, filling range: 1000l-10150l. Documentation available. On-site inspection is possible.

Building width 9 m Length 18 m Height 6.2 m Wind zone 1 Snow Load Zone 2 Monopitch roof inclination 10 degrees.

paint can vacuum cabinet; cleaned and tested; suitable for paint cans up to 2.5 kg; new windscreen; Incl. Colour stirrer Easymix. Color can vacuum cabinet; cleaned and checked; used for cans till 2.5 kg; new front panel; incl. Ink mixer Easymix.

Herma's high-performance labeling machine for lid and side labels. Capacity: 100 labels per minute Round cans were labeled with the Herma (400ml). However, it can also be used for any other cans and bottles. The machine sticks the label all around and also on the lid. The machine therefore has several labeling heads, so that the label is simultaneously labeled all around the can/bottle and is also labeled on the lid of the can/bottle. The machine is in perfect working order. The reason for the sale is the change in the packaging of the product.

Fully automatic can holder/bottle display from Tölke incl. feeder. Perfectly functional, used in a production until recently. The can display is sold solely because of a change in packaging of the product. 60 pcs/min Adjustable to different formats, currently set to 400 ml round cans. Can also be used for bottles and other cans of any kind The machine can be visited.

Cantilever rack for light loads, single-sided, frame height 2m, shelf length approx. 3m, 50cm deep arms, 200kg per arm, hot-dip galvanized - new product - : Price ex location incl. loading: only 895.-€ (net), plus packaging and freight. Price per additional stand: 225.-€ (net) Price for transport on request! Manufacturer: Bruckamp Year of manufacture: New Type: Super Lightweight Set components: 4 stands with 5 arms / 3 panels with connections Stand distance: approx. 1m Total length of construction area: approx. 3m Shelf height: 2m Foot and arm depth: 500mm Robust construction – made from an IPE 100 with firmly welded arms at a distance of approx. 330mm. Load capacity per stand: 1,000kg Payload per arm: 200kg Incl. ground anchor Incl. stress shield Description: 4 stands with 1 m axial dimension as a set incl. screws. Key benefits: Easy to assemble  ...

Can filler and seamer Markl / Bonicom Filler: Markl Bavaria 16L with 16 filling valves Seamer: Bonicom F 120 with 2 seaming heads Capacity: approx. 5.000 cph Can size: 330 ml and 500 ml standard cans Can type: 211 / 202 good condition

A total of 40 copper dragee pans from the manufacturers Pefa and Lichtenberg are available. Material: copper, diameter: 950mm, motor power: 0.8kW. An on-site inspection is possible.

Offer 25521 Double-sided long goods – cantilever rack without contents Technical data: - 2-sided cantilever rack consisting of 10 uprights with plug-in system - Height-adjustable bearing arms - 130 bearing arms - Stand height approx. 6000 mm - Wide stands + support arms approx. 1600 mm - max. arm load approx. 400 kg - Max. drawbar load per support approx. 5000 kg - Center distance of the shelf parts connected to diagonals approx. 1.0 m - Grid spacing for the reg arm - Height adjustment 125 mm - Arm dimensions: L 700 x W 90 x H 70 mm - Stand dimensions W 220 x H 150 mm - Weight per post approx. 400 kg - Weight per arm approx. 10 kg

This state-of-the-art can filling line from Krones was manufactured in 2022 and is designed for the filling of carbonated and non-carbonated beverages. It processes various can formats – including standard, slim and sleek cans – with an impressive output of up to 60,000 cans per hour at 250 ml. The line was serviced exclusively by Krones and has been equipped with original spare and wear parts. With only 4,000 operating hours, it is in excellent, almost mint condition and is immediately available. The scope of supply includes a depalletizer, an empty can inspection, a Modulfill VODM-C filling machine, a Ferrum seamer, a pasteurizer, a modern packaging line including shrink packers (for 6-packs or trays with 12 or 24 cans), as well as various transport, drying and inspection modules. The line is supplemented by a complete CIP system, buffer tanks, a Contiflow processing unit, as ...

Racking hall consisting of cantilever racks and pallet racks, OHRA, floor area approx. 867m2 – used - : Price from location: 99.500.-€ (net), for self-dismantling! Price for disassembly on request. For an extra charge, the material for closing a gable side is also available! Manufacturer: OHRA Year of construction: 2019, the sheets 2021 Dimensions of the hall: Width approx. 17.35m Length: approx. 50m Height: Shelf approx. 6,385mm Height ridge approx. 7.10m After dismantling, one long side of the hall is open (where it now stands at the existing hall) Cantilever rack: 2 rows of 25 double-sided frames = a total of 50 pieces of cantilever rack frames double-sided Arm length: 1.20m Arm Load: 1,400kg Load center of gravity: 600mm Stand load per side: 4,200kg Wheelbase: 2m Arms are plugged in Arms with load deflector, device for roll-off protection Incl. palle ...

A 3-compartment filter housing is sold On request and for an extra charge with new filter elements

8-fold cartridge filter housing with new filter elements on request for an extra charge

Pneumatic can opener, make Edlund, type 625 M, powerful compressed air operated lid punch, (crown punch),, industrial can opener for large cans,, self-sufficient can opener for industrial use,, Output: approx. 2,000 cans per day, Characteristics:, completely made of stainless steel, for thorough cleaning can be hosed down from top to bottom, IP 65,, Suitable for opening cans of almost any size thanks to the height adjustability, Two - hand - operation, Compressed air requirement: 56.6 l / min at 6 bar,, format range:, minimum box height: 40 mm,, max. box height: 300 mm,, max. can diameter: 230 mm,, Info:, - Existing punching crown for can diameter 153 mm, - Additional punching crown optional, - With magnetic lid remover

New device!, completely made of stainless steel, for a daily output of up to 200 cans, suitable up to can diameter: max. 157 mm and max. can height: 266 mm, capacity: approx. 6-10 cans/min, opens cans with a single manual movement, no sharp edges ( burr ) on the can.

New device!, O Opens cans with a single manual motion, O Powerful manual lid punch (Crown Punch), O Recommended for a daily output of up to 200 canisters/day., O No sharp edges on the can due to the use of half-stump knives., O For extra large containers (custom-made tools required. Available separately), completely made of stainless steel, suitable up to can diameter: max. 230 mm and max. can height: 328 mm, Power: approx. 6-10 cans/min,

Complete can filling and closing line for liquids (nutrition) in 250 gram aluminium cans. Product: nutrition liquids. Formats: diameter 65 mm, height: 90 mm, filling weight 250 gram. 24x per box. Capacity: up to 500 / 420 cans per minute (30.000 / 25.000 per hour) for different parts of the line (with automatic palletiser) but the last year reduced to 325 cans per minute (19.500 per hour) because of manual palletising of the carton boxes on a pallet. Dismantling date: March / April 2026., Line exisiting out of:, 1. Preformed can de-palletiser machine, separate layer by layer from the pallet including lid sorting unit., Manufacturer: van Uitert B.V., Year: 1996, Machine number: D05-11399-01, Serial number: 1996.07.005, Installed power: 10 kW - 400 V - 50 Hz, Consumption of air: 3 Nm3/h, Weight: 2.500 kg, Capacity: up to 500 cans/min = 30.000 cans/h, Control panel with Danfoss VLT frequenc ...

Gastro Table - Can Opener / Industrial Opener / 60 cmâ Product Descriptionâœ" Item Condition: New and Packedâœ" Manufacturer: SCHNEIDER GmbHâœ" Material: Stainless Steelâœ" Length: 600 mmâ Details see pictures

Cantilever racking, heavy-duty racking -without insert trays: none available -Double-sided -consisting of: -Shelf: with 3 uprights each, height 5.4 m -Support arms, double-sided: 500 mm long -Brack load capacity: 795 kg -Load capacity per side: max. 7000 kg -screwed -Number: 4 shelves available -Price: per piece -Empty weight: 1250 kg/piece

Cantilever rack, heavy duty rack -Manufacturer: Gemac, cantilever rack base field double-sided -Cantilevers: 5 per side -Compartment height: 33 cm -perm. Load: 200 kg per cantilever arm / 1000 kg total. see nameplate -Quantity: 12x shelves available -Price per piece -Dimension: 1315/1210/H2000 mm -Weight: 98 kg/piece

Cantilever rack, heavy-duty rack -Cantilever rack: base field double-sided, 2 uprights -Cantilever arms: 4 per side, length 500 mm -Compartment height: variably adjustable -Quantity: 2x shelves available -Price per piece -Dimensions: 1180/1195/H2960 mm -Weight: 139kg / 140kg

Cantilever rack, heavy-duty rack -Manufacturer: LBE, cantilever rack base field double-sided -Cantilever arms: 5 levels per side, length 500 mm -Compartment height: variably adjustable -Load capacity: 1-sided 630 kg, see photos type plate -Quantity: 1x shelf available -Dimensions: 1300/1180/H1985 mm -Weight: 80 kg

Cantilever racking, heavy-duty racking, single-sided cantilever racking, pallet racking -Manufacturer: Bito, cantilever rack one-sided base bay type KR29 L height 1980 mm -Stands: 4 pieces 1980/605/55 mm grid 60 mm adjustable -Cantilever arm length: usable depth 500 mm / 29 pieces -Load capacity per cantilever arm, max. 175 kg, see photo type plate -Cross braces: 6 pieces 1060/140/60 mm -Transport dimensions: 2100/760/H150 mm -Total weight: 180 kg

CAN SEAMER SOMME, MODEL: 444, ¼ CLUB FORMAT Technical description: With protective fairing Throughput rate: ± 80/90 Jars/min Power supply: 380-440V/50-60 Hz

A Makat depositing and cooling line for hard candies is available. Working width: 530mm, mold cavity arrangement: 2 rows, cavities per row: 19, total cavities per mold: 38, max. stroke rate: 25/min, production capacity 4.5g: approx. 400kg/h, product weight: 2.5g/4.5g, total line dimensions X/Y/Z: approx. 10500mm/1500mm/2300mm. Documentation available. An on-site inspection is possible.

An FMI separating machine for can production is available. Production capacity: approx. 500cans/min, diameter range: 52mm-99mm, height range: 40mm-85mm. An on-site inspection is possible.

A Borden beading machine for metal can production is available. Can diameter range: 211mm/603mm, can height range: 300mm-700mm. Documentation available. An on-site inspection is possible.

A beader, flanging and beading machine for cans by Metal Box Company is available. Can type: 3-piece cans, can shape: round, tool diameter: 150mm, max. can height: 180mm, performance range: 70-280cans/min. An on-site inspection is possible.

10852025 Beverage Can Filling Line – 1500 Cans Per Hour with CASK mACS Filler (2022) High-quality beverage can filling line with integrated Cask Brewing Systems Inc. mACS can filler, manufactured in 2022 and designed for efficient small- and medium-scale beverage production. This canning line is suitable for beer, kombucha, cider, tea, carbonated soft drinks, and still beverages. The system combines reliable filling technology, flexible can handling, and low-oxygen filling performance to deliver excellent product quality and shelf stability. The line includes a semi-automatic can depalletizer, rinser, conveyor system, and CASK mACS V2.0 three-head can filling station. The depalletizer operates with forklift-assisted pallet loading, allowing cans to flow smoothly by gravity through the rinsing section and into the filler infeed system. The CASK mACS Micro Canning System utilize ...

Teikoku Canned Motor Pump BA61 Manufacturer: Teikoku Electric Mfg. Co., Ltd. (Japan) Sales: AxFlow AB, Stockholm, Sweden Model / Type: BA61-116J4BL-050611V-F Serial Number: FC-1236A-2 Date of manufacture: July 2010 Performance data: Lifting height: 50 m Flow rate: 18 m³/h Frequency: 50 Hz Voltage: 400 V Power: 11 kW Current: 23 A Number of poles: 2 Degree of protection: IP65 (IEC 60529) Operating mode: S1 (continuous operation) Ambient temperature range: −15 °C to +40 °C Location: Kusel

A mechanical Karges-Hammer eccentric press for series production in can manufacturing is available. Ram stroke: 75mm, flywheel speed: 80rpm, motor power: 3HP, speed: 294rpm. An on-site inspection is possible.

A sheet metal blank feeding press Alfons Haar for metal can production in the packaging industry is available. Press force: 40t, stroke: 170mm, max. speed: 180rpm, drive power: 18.5kW, cutting circle diameter: 400mm, max. drawing depth: 55mm, max. sheet dimensions X/Y: 1150mm/1000mm, material thickness range: 0.1mm-0.5mm, throughput: approx. 520cans/min, machine dimensions X/Y/Z: approx. 8950mm/4500mm/3900mm. An on-site inspection is possible.

A mechanical Karges-Hammer eccentric press for series production in can manufacturing is available. Ram stroke: 75mm, flywheel speed: 80rpm, motor power: 3HP, speed: 294rpm. An on-site inspection is possible.

A large-format can filling and closing machine JBT FoodTech from the food industry is available. Can weight: 750g/1000g, can content: sweetened condensed milk, max. throughput capacity: 600cans/min, filling heads: 22, closing heads: 5, design: monoblock, control system: Siemens. Documentation available. An on-site inspection is possible.

A fully automatic Ferrum can filling and sealing machine is available. Can weight: 397g, can content: sweetened condensed milk, sealing heads: 6, throughput capacity: approx. 250cans/min, machine dimensions X/Y/Z: approx. 2300mm/1550mm/2300mm, weight: approx. 3500kg. The filling bowl has been repaired several times. Documentation available. An on-site inspection is possible. Expected to be available around September 2026.

60,000 CPH 330ml, 500ml 200/211

STERITECH Industrial Autoclave / Food Sterilizer (Diameter 1,300 mm) for canned goods, jars and packaged food products., With heat exchanger, with cooling water - System., For sale is a used horizontal high-performance autoclave from the French manufacturer STERITECH S.A., specifically designed for thermal sterilization and pasteurization of foods in cans, jars, and other pressure-resistant packaging., The system is ideally suited for:, - Canning industry, - Fine food and convenience production, - Pet food, - Soups, sauces and ready meals, - Vegetable and meat canned goods, - Glass, bowls and can packaging, The autoclave has a usable volume of approx. 5.520 liters and is equipped with a PLC/touch control. The machine operates in steam mode or steam/water spray mode and ensures uniform heat distribution for safe and reproducible sterilization processes., The present TÜV inspection certif ...