can extruder used for sale

Francis Shaw Extruder Screw diam. 100mm (4?) LD ratio 10:1 Roller Feed Brush DC Motor 100HP motor 1500rpm 460 volts Variable speed drive Complete with Control Panel

Bainite (India) model BMPX150 PIN type cold feed extruders, Year of manufacture 2013 Screw diameter: 150mm L/D ratio 16:1 Output: 1200 - 1500kg/hr Power roller feed (opening 175mm), provision for cooling, Screw speed: variable max 50rpm, Max operating pressure: 340bar (5000psi) 10 rows of 8 pins (80 total) With 210kW Siemens AC v/s motor through 28:1 reduction gearbox (service factor 1.75) Hinged extrusion head with C'clamp suitable for strip All mounted on a fabricated steel base Complete with electrical controls and VFD (Siemens make). Safety features as per European standards.

Semi - Automatic Butter Extruder and Shaping Machine fited on full stainless steel frame, Control panel. Two Stainless steel screw augers, stainless steel hopper. Manufacture : Dairy Machinery UK Model : DMUK EXSH1 Usage : Butter Extruding and Shaping Machine Shapes : Various Shapes and Sizes Condition : New Warranty : 12 months Spare Parts : Dairy Machinery UK

Iddon Extruder Screw diam. 38mm (1.5”) Motor: Reyrolle AC 11/2.2HP 220-250 380-440 volts 1500/300rpm 29/16.5amps Continuous rating

Extruder for food products. producer: model: MU A14342 machine performance: 1200 kg/h year: 2017

PREALPINA EXTRUDER 130 mm., For PE PP ABS PS PC PS, nominal throughput rate 500-600 kg/h depending on material and feeding rate, 200 kw. d.c. drive and starter (new 2019), Electric cabinet (in need of some refurbishing), CE compliance, users manual, electrical drawings, crammed feeding unit, Barrel with screw diam.130 mm.35 L/D, N.1 vacuum degassing pump, Constructed 1996,, offered : as is where is, good working conditions, installed power - used power in work: about 60-65% : 200, conditions: AS IS OR RECONDITIONED TO YOUR BUDGET EXTENT, options available: AS IS or RECONDITIONED, capacity: 500-600 kg/h nominal capacity

Brand Hans Weber Maschinenfabrik GmbH Type DS 8.7 Serial number DS 85 777 Type Screw Double screw Year of manufacturing 1989 Working hours 24.048 H Screw diameter 87 mm Be Ujvuzqzed Dvycelp Connection Load 90 kW

General SKU204U026 MakeWerner &: Pfleiderer TypeZSK 58 F96E Mach.No.231616 Year of construction1995 Sizes Screw diameter57.8 mm Main Features Motor74 KW Inlet diameter100 mm L/D27 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter57.80 L/D27 Co-rotatingcheck Ventedcheck Water coolingcheck AC-motorcheck Screw speed191 rpm MaterialNitriding steel 1.8519 With jacketcheck General LocationBarneveld With switchgear(as is) Floorspace2.5x1.4 m Total height1,5 m Extra Specificationsthe currently installed head” on the extruder is a cleaning head. this is not a die.- there are 2 screw shafts present.- no screw segments present.- this extruder comes with brush screws.- the extruder comes with 4 extra housing segments.this extruder was part of a complete system.any associated machines are:Collin Calander Pharma 200x400 , sku: 204U929So ...

General SKU359W975 LocationBarneveld CEcheck MakeLeistritz Sizes Screw diameter27 mm Main Features Motor15 KW L/D40 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter27 L/D40 Co-rotatingcheck Number of heating zones:10 Electric heatingcheck Water cooling9x DC-motor15 kW, 400 volt, 1750 rpm AC-motorcheck With variable speed drivecheck Screw speed30-500 rpm Feeding with metering screwK-tron Exchangeable segmentscheck Number of temperature controllers:1 Used oncarrier material Capacitymax 200 kg/h MaterialStainless steel, Stainless steel 2.4819 (Hastelloy C-276) General TypeZSE 27HP-PH-40D Mach.No.3899 Year of construction2010 With switchgearcheck Floorspace3,65 x 1,15 m Total height1,80 m Weight1200 kg Extra Specifications- This extruder has been used for testing carrier material. No API was produced/ used in this extru ...

General SKU354T968 MakeWerner &: PFleiderer TypeContinua 37/27 D Mach.No.220331 Year of construction1985 Sizes Screw diameter37 mm Main Features Motor7.6 KW L/D27 Specified Features - Double screw extruder Double screw extrudercheck Number of hours284222 Screw diameter37 mm L/D27 Co-rotatingcheck Number of heating zones:5: 1 cooling: 4 heating Steam heatingcheck DC-motor7,6 kW 440 Volt With variable speed drivecheck Screw speed0-400 rpm Exchangeable segmentscheck Number of temperature controllers:5 MaterialMild steel With jacketcheck General LocationBarneveld With switchgear(as is) Floorspace3,2x1,3 m Total height2,3 m Weight1700 kg Extra Specificationswith extra screwsPowdered foodsAgrochemicalsPlastic & polymersCosmeticsAnimal feedOther feedDouble screw extrudersWerner & PfleidererIndustries > Food & Feed > Powdered foodsIndustries > Chemical > Agrochem ...

General SKU368W1091 MakeWerner &: Pfleiderer TypeZSK 30 W 9/2 Mach.No.219522 Year of construction1985 Sizes Screw diameter30 mm Main Features Motor10.4 KW Inlet diameter60 mm L/D33 Specified Features - Double screw extruder Double screw extrudercheck Number of hours8013 Screw diameter30 L/D33,3 Co-rotatingcheck Number of heating zones:8 Electric heatingcheck AC-motor10,4 kW, 440 volt With variable speed drive200-2200 rpm Screw speed4,4:1 Feeding with hoppercheck MaterialMild steel With jacketcheck General LocationBarneveld With switchgearcheck Floorspace2,80x0,85 m Total height1,30 m Weight1100 kg Extra Specificationshomogenizing extruderwith spareparts.Powdered foodsAgrochemicalsPlastic & polymersCosmeticsAnimal feedOther feedDouble screw extrudersWerner & PfleidererIndustries > Food & Feed > Powdered foodsIndustries > Chemical > AgrochemicalsIndustries  ...

General SKU397W1236 MakeWeber TypeCE-03 Mach.No.CE 3061 Year of construction1985 Sizes Screw diameter35 mm Main Features Motor18 KW Inlet diameter50 mm L/D20 Specified Features - Double screw extruder Double screw extrudercheck Number of hours50927 Screw diameter35 L/D20 Counter rotatingcheck With vacuum pump0,75 kW, 8 m3/h, 2850 rpm Number of heating zones:1 Electric heatingcheck AC-motor18 kW, 220/380 volt Number of temperature controllers:7 Used onPVC Capacity30 kg/h With jacketcheck General LocationBarneveld With switchgearcheck Sizes switchgear0,75x0,37x1,10 m Floorspace1,70x0,90 m Total height1,50 m Weight700 kgPowdered foodsAgrochemicalsPlastic & polymersCosmeticsAnimal feedOther feedDouble screw extrudersWeberIndustries > Food & Feed > Powdered foodsIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plastic & polymersIndustries > Chemica ...

General SKU340U844 MakeBerstorff / Brabender Typedoppelschneckenextruder DSE 25 Year of construction1994 LocationBarneveld Sizes Screw diameter25 mm Main Features Motor6.5 KW Inlet diameter40 mm L/D32 Specified Features - Double screw extruder Double screw extrudercheck Number of hoursunknown Screw diameter25mm L/D32 Co-rotatingcheck Ventedcheck Number of heating zones:7 Electric heating±15kW Water coolingweinreich- industriekühlung, 12kW, 1994 DC-motor6,5kW Screw speed240rpm Feeding with hoppercheck Exchangeable segmentscheck Number of temperature controllers:8 Capacity40kg/h Materialstainless steel 1.4122, Stainless cast steel 1.4027 General With switchgear(as is) Floorspace2,6x0,9m Total height1,5m Weight890kg CEcheck Extra SpecificationsMaximum torque of extruder screw per piece: 90 Nm. Maximum temperature: 400°C. Maximum melt pressure: 300 bar. ...

General SKU231U203 LocationBarneveld CEcheck MakeLeistritz Main Features Motor52 KW Inlet diameter49.7 mm L/D40 Specified Features - Double screw extruder Double screw extrudercheck Number of hours31783 Screw diameter49,7 mm L/D40 Co-rotatingcheck Number of heating zones:9 Electric heating33 kW Water coolingtype: ZIK - (Zylinder Intensiv Kühlung, eng. Barrel intensive cooling) DC-motor46 kW, 460 Volt AC-motorside dosing screw of the extruder: 1,5 kW 230-400 Volt Screw speedmax. 400 rpm MaterialNitriding Steel 1.8550 General TypeSZE-50 GL Mach.No.94.91.2168/7 Year of construction1994 Sizes switchgear(as is) Floorspace4,26x0,80 m Total height1,9 m Weight2000 Extra Specificationspower cabinet dimention: 2,26x0,62x2,2 mGleichlauf ::GL:Powdered foodsAgrochemicalsPlastic & polymersCosmeticsAnimal feedOther feedNew arrivalsDouble screw extrudersLeistritzIndustrie ...

Extruder for the production of packaging chips built in 1994

General SKU281W438 LocationBarneveld MakeLeistritz Sizes Screw diameter30 mm Main Features Motor16 KW Inlet diameter65 mm L/D30 Specified Features - Double screw extruder Double screw extrudercheck Number of hours3457 Screw diameter34 L/D30 Counter rotatingcheck Ventedcheck With vacuum pumpcheck Number of heating zones:6 Electric heatingcheck DC-motor3 kW (380 V) Screw speed110 rpm Feeding with hoppercheck Exchangeable segmentscheck MaterialStainless steel General TypeLSM-30 34 GG Mach.No.330182401 Year of construction1990 With switchgearcheck Sizes switchgear700 x 500 x 450 mm Floorspace2,75 x 0,91 m Total height2 m Weight1000 kg Extra SpecificationsScrew Dia. 34 mm, center distance 30 mm, screw thread depth 4 mm, 6 heating zones, 7 cool zones,gear speed 2200 rpm / I=20 rpm,Resotec control, extrusion packPowdered foodsAgrochemicalsPlastic & polymersCos ...

Key data: 65 mm

Qty. 1 Second-hand 3-Layer Co-Extruder Line Brand & Model: MACCHI 3-layer co-extruder Built: 2012 Materials to be processed: LLDPE/LDPE/LLD/HDPE Extruders: 65 mm + 80 mm + 65 mm Infrared heaters 3 pcs plate filters Head: 3 Layer blown film Die head TE5303-IBC-350/500 Dies diameter 350 and 400 mm IBC Die Gap: 1.8 mm Output: Up to 800 kg/hour depending on material formulation Air ring: Dual flow air ring carbon fibre Take off: Take off 2400 mm wide Oscillating nips Motorised side gusseting Rewind: Double winder, fully automatic back-to-back rewinder Winder, fully automatic roll change Reels diameter up to 800 mm Winding width 2350 mm Accessories: Tower Web guide E&L Components blander Shini Gravimetric weight control system Piovan/Doteco Dosing units Doteco Automatic Thickness control Kundig/K-Design Profile gauge control system Calibrating basket Corona-treat ...

The Kinsley Extruder & Dough Machine Pretzel Stringer KPM W0-9288-1 Model 985.612F is a commercial-grade baking and dough equipment designed for restaurant and food service establishments. This electric-powered floor model features a unique design for creating pretzel strings with ease and efficiency. With the trusted Kinsley brand, this dough machine is ideal for professional bakeries looking to streamline their production process and produce high-quality baked goods.

General SKU359W976 LocationBarneveld CEcheck MakeLeistritz Sizes Screw diameter27 mm Main Features Motor15 KW L/D40 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter27 L/D40 Co-rotatingcheck Number of heating zones:10 Electric heatingcheck DC-motor15 kW, 400 volt, 1750 rpm AC-motorcheck With variable speed drivecheck Screw speed30-500 rpm MaterialStainless steel 2.4819 (Hastelloy C-276) General TypeZSE 27HP-PH-40D Mach.No.3778 Year of construction2008 With switchgearcheck Floorspace3,65 x 1,15 m Total height1,80 m Weight1200 kg Extra Specificationsthis unit comes with:-2x k-tron feeders.- control cabinet.- 3x temperature control units.- extruder barrel lift- spare partsPowdered foodsAgrochemicalsPlastic & polymersCosmeticsAnimal feedOther feedNew arrivalsDouble screw extrudersLeistritzIndustries > Food & Feed > Powdered fo ...

General SKU359W974 LocationBarneveld CEcheck MakeLeistritz Sizes Screw diameter18 mm Main Features Motor4.7 KW L/D40 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter18 L/D40 Co-rotatingcheck Number of heating zones:8 Electric heating1,0kW (8x) Water coolingcheck AC-motor4,7 kW, 400/230 volt With variable speed drivefrequency converter Screw speed30-600 rpm Feeding with metering screwcheck Exchangeable segmentscheck Number of temperature controllers:7 MaterialStainless steel 1.4571 (316Ti) General TypeZSE 18PH-40D GMP-Design Mach.No.03396 Year of construction2005 With switchgearcheck Floorspace2,29 x 0,70 m Total height1,27 m Extra Specifications- This extruder has been used for testing carrier material. No API was produced/ used in this extruderThe scope consists of: Leistritz ZSE 18 PH-40D in GMP design with Lauer touc ...

General SKU357X1337 LocationBarneveld MakeBuss Main Features Motor21.5 KW Inlet diameter50 mm L/D15 Specified Features - Mixing extruder Single screw mixing extrudercheck Screw dia.46mm L/D15 With heating zones3 DC-motor0,710-21,5 kW, 380 volt, 50-1520 rpm Screw speed300 rpm InletDia. 50 mm Feeding with hoppercheck Max. temperature250 MaterialStainless steel With jacketcheck General TypeMDK 46B Mach.No.87/652482 Year of construction1987 Mounted on framecheck Floorspace2,70x0,55 m Total height1,90 m Weight1000 kg Extra SpecificationsWith 2-roll cylinder, roll diameter 150mm, roll length 400mm, 0:55 kW, 220/380 volt, 1400 rpm, roll speed 3,6-18 rpmGeneric medicinesPlastic & polymersCatalysts & fillersMixing extrudersCosmeticsSolid pharmaceuticsDyes & pigmentsMinerals & inorganicBussIndustries > Pharmaceutical > Generic medicinesIndustries > Chemical > Plastic & ...

used extruder in good condition. Complete with motor, gearbox and heating bands

General SKU379X944 MakeCollin LocationBarneveld Type20x20 D Main Features Motor4.5 KW Inlet diameter30 mm L/D20 Specified Features - Single screw extruder Single screw extrudercheck Working hours:1324 Screw diameter20 L/D20 Number of heating zones:4 Electric heatingcheck AC-motor4,5 kW, 3x 380/220 V Inlet30 x 20 mm Feeding with hoppercheck Number of temperature controllers:4 MaterialStainless steel With jacketcheck General No.32000892 Year of construction1992 With switchgearcheck Floorspace1,60x0,60 m Total height0,80 m Extra SpecificationsWith Collin granulator, 0-1400 rpm, 220/380 volt&:nbsp:Powdered foodsGeneric medicinesStarchSingle screw extrudersAgrochemicalsDetergent & surf.CosmeticsLubricants & oleoAnimal feedOther feedConfectionerySolid pharmaceuticsDyes & pigmentsBiopharmaceuticalCollinIndustries > Food & Feed > Powdered foodsIndustries > Pharmaceut ...

General SKU359W977 MakeLeistritz TypeZSE 27 HP-PH-40D Mach.No.3659 Year of construction2007 Sizes Screw diameter27 mm Main Features Motor15 KW L/D40 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter27 L/D40 Co-rotatingcheck Number of heating zones:10 Electric heatingcheck DC-motor15 kW, 400 volt, 1750 rpm AC-motorcheck With variable speed drivecheck Screw speed30-500 rpm MaterialStainless steel 2.4819 (Hastelloy C-276) General LocationBarneveld With switchgearcheck Floorspace3,65 x 1,15 m Total height1,80 m Weight1200 kg CEcheck Extra Specificationsthis unit comes with:- control cabinet.- 3x temperature control units.- extruder barrel liftPowdered foodsAgrochemicalsPlastic & polymersCosmeticsAnimal feedOther feedNew arrivalsDouble screw extrudersLeistritzIndustries > Food & Feed > Powdered foodsIndustries > Chemical > Agro ...

General SKU435U1404 LocationBarneveld MakeKrupp werner &: pfleiderer Sizes Screw diameter25 mm Main Features Motor21 KW Inlet diameter80 mm L/D40 Specified Features - Double screw extruder Double screw extrudercheck Number of hours32473 Screw diameter25 mm L/D20 Co-rotatingcheck Number of heating zones:7 Water coolingcheck Screw speed200-1200 rpm Feeding with hoppercheck Feeding with metering screwbrabander. 0,37kW, 119rpm, screw dia 35mm Capacity100 kg/h MaterialNitriding steel 1.8519 General TypeZSK 25 P8 2E WLE Mach.No.20474223 Year of construction2000 With switchgear(as is) Floorspace2,1 x 0,8 m Total height1,6 m Weight1100 kgPowdered foodsAgrochemicalsPlastic & polymersCosmeticsAnimal feedOther feedDouble screw extrudersWerner & PfleidererIndustries > Food & Feed > Powdered foodsIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plastic & pol ...

General SKU354T1381 MakeHosokawa Bepex GmbH LocationBarneveld TypeBX 200 T Main Features Motor3 KW Inlet diameter120 mm Specified Features - Mixing extruder Granulatorcheck Rotor granulatorcheck Rotor sizesDia: 200x50 mm Ring diecheck Die sizesDia: 200x55 mm Number of dies available:2 Die perforationDia: 2mm (4x), Dia 1,5mm(2x), 1,2x6mm Motor3kW, 220-240/280-420Volt, 1430 rpm With pre-mixercheck With motor1,5 kW, 220-240/380-420 Volt, 1400rpm InletDia: 120 mm (2x) With jacketcheck Mixing extruders MaterialStainless steel 1.4306 (304L), Stainless steel 1.4401 (316) General No.18227-01 Year of construction2009 Mounted on framecheck Mounted on wheelscheck With switchcheck With switchgear(as is) Floorspace1,3x1,05 m Total height1,75 m Weight680 kgGeneric medicinesPlastic & polymersCatalysts & fillersMixing extrudersCosmeticsSolid pharmaceuticsDyes & pigmentsM ...

General SKU269X293 MakeCollin LocationBarneveld CEcheck TypeTeach-line E20T and BL50T Main Features Motor9 KW Inlet diameter30 mm L/D25 Specified Features - Single screw extruder Single screw extrudercheck Screw diameter20 L/D25 Number of heating zones:2 Electric heatingcheck Air coolingcheck DC-motor1,1 kW, 400 volt, 1400 rpm Feeding with hoppercheck Max. temperature300°C MaterialStainless steel With jacketcheck General No.9120 3914 Year of construction2014 With switchgearcheck Floorspace0,85x0,65 m Total height0,70 m Weight100 kg Extra SpecificationsWith Teach-line film blowing line, type BL50T, dia. Take off rolls, 50 mm, roll width 200 mm, max bubble dia. 110 mm, speed 13 m/min,&:nbsp:winder dia. 52 mm, max pulling force 95N, max coil dia. 300 mm&:nbsp:Powdered foodsGeneric medicinesStarchSingle screw extrudersAgrochemicalsDetergent & surf.CosmeticsLubr ...

General SKUR1061 MakeKrupp Werner &: Pfleider TypeZSK 50 P8.15E Mach.No.20474395 Year of construction2000 Sizes Screw diameter45 mm Main Features Motor51 KW Inlet diameter50 mm L/D40 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter45 mm L/D40 Co-rotatingcheck Number of heating zones:10 Electric heatingcheck Water coolingcheck DC-motorcheck With variable speed drivecheck Screw speedmax 600 rpm Feeding with hopper(3x) Feeding with metering screwcheck Exchangeable segmentscheck Used oncomposite Capacityapprox. 500 kg/h MaterialStainless steel 1.2379 (X153 CrMoV12) General LocationBarneveld With switchgear(as is) (2x) Sizes switchgear0,9x0,6x2,1 M (1x) 1,6x0,6x2,1 M (1x) Floorspace4,7 x 1,1 m Total height1,5 m Weight4000 kg Extra SpecificationsWith twin screw side entry Werner &:amp: Pfleiderer ZS-B 58with 3 x K-tron do ...

General SKU292M349 MakeBerstorff TypeZE-25 Mach.No.EO 0324/88 Year of construction1989 Main Features Motor6 KW Inlet diameter25 mm L/D20 Specified Features - Double screw extruder Double screw extruder(1x) Screw diameterdia. 25x500mm L/D20 Number of heating zones:3 Electric heatingcheck Water coolingcheck DC-motor6 KW, 200 Volt Screw speed0-450 Rpm Feeding with hoppercheck Feeding with metering screwcheck General LocationBarneveld With switchgear(as is) Sizes switchgear0,8x1,0x2,0 M Floorspace1,8x0,8 M Total height1,1 M Weight450 KG Extra Specificationsincl. tempereer eenheid 3,5 KW, 380 Volt. THERE ARE NO SCREWS WITH THIS MACHINE !Powdered foodsAgrochemicalsPlastic & polymersCosmeticsAnimal feedOther feedDouble screw extrudersBerstorffIndustries > Food & Feed > Powdered foodsIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plastic & polymersIndus ...

General SKU300P748 LocationBarneveld CEcheck Main Features Motor3 KW Inlet diameter50 mm L/D20 Specified Features - Double screw extruder Double screw extrudercheck Number of hours567 Screw diameter50mm L/D20 Co-rotatingcheck Number of heating zones:1 Steam heatingcheck Water coolingcheck AC-motor3,0 KW, 230/400 Volt With variable speed drivecheck Number of temperature controllers:1 Used onicecream MaterialStainless steel General MakeAPV Baker Industrial Extruder Division Ltd (UK) Mach.No.WEF960037 724/1 Year of construction1996 With switchgearcheck Floorspace2,6x1,2 M Total height1,6 M Weight1100 KG Technical specs Extra informationscrews form stainless steelPowdered foodsAgrochemicalsPlastic & polymersCosmeticsAnimal feedOther feedDouble screw extrudersAPV ProductsIndustries > Food & Feed > Powdered foodsIndustries > Chemical > AgrochemicalsIndustries >  ...

General SKU011C013 LocationBarneveld MakeLeistritz Sizes Screw diameter110 mm Main Features Motor110 KW Inlet diameter110 mm L/D20 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter110 mm L/D20 Counter rotatingcheck Number of heating zones:4 Electric heatingcheck DC-motor10-110 KW General TypeZSE-110 Mach.No.86.02.1822 Year of construction1986 With switchgear(as is) Sizes switchgear120 x 70 x 230 cm Floorspace4,7 x 1,4 m Total height2,2 mPowdered foodsAgrochemicalsPlastic & polymersDiscountCosmeticsAnimal feedOther feedDouble screw extrudersLeistritzIndustries > Food & Feed > Powdered foodsIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plastic & polymersDiscountIndustries > Chemical > CosmeticsIndustries > Food & Feed > Animal feedIndustries > Food & Feed > Other feedExtruders > Double screw extrudersBrand > Leistr ...

General SKU304P676 LocationBarneveld MakeAPV Chemical Machinery Ltd TypePGX 30 Main Features Motor4 KW Inlet diameter30 mm L/D10 Specified Features - Double screw extruder Double screw extrudercheck Number of hours19187 Screw diameter30mm L/D10 Co-rotatingcheck Water coolingcheck AC-motor4,0 KW With variable speed drivecheck Screw speed(161rpm) Feeding with hopperdia.340mm x400mm Feeding with metering screwK-Tron T-22 twinscrew, Motor feeder 0,55 KW, Motor agitator 0,18 KW Number of temperature controllers:1 Capacity30 KG/Hr MaterialStainless steel 1.2379 (X153 CrMoV12), Stainless steel General Mach.No.800471 Year of construction1989 With switchgearcheck Floorspace1,8x0,8 M Total height2,2 M Extra Specificationswith extrudermold dia.1mmPowdered foodsAgrochemicalsPlastic & polymersCosmeticsAnimal feedOther feedNew arrivalsDouble screw extrudersAPV ProductsIn ...

General SKUR1123 MakeWLS Gabler Maschinenbau KG (D) LocationBarneveld TypeDE 100/100 Main Features Motor18.5 KW Inlet diameter100 mm L/D9 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter100mm L/D9.4 Co-rotatingcheck Number of heating zones:2 AC-motor18,5 kW 380/660 Volt Feeding with hoppercheck MaterialStainless steel General No.12482 Year of construction1992 With switchgear(as is) Floorspace2,5x1,3 M Total height1,7 M Weight2150 Kg Extra SpecificationsIncluding 1 piece Single Temperiertechnik heating units STW 150 / 1-9-20-K1S 9 kW 400 Voltincluding 2 spare screwsPowdered foodsAgrochemicalsPlastic & polymersCosmeticsAnimal feedOther feedDouble screw extrudersWLS GablerIndustries > Food & Feed > Powdered foodsIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plastic & polymersIndustries > Chemical > CosmeticsIndustr ...

General SKU357X1336 LocationBarneveld MakeBuss AG Main Features Motor49 KW Inlet diameter79 mm L/D17 Specified Features - Mixing extruder Single screw mixing extrudercheck Screw dia.69,8 mm L/D17 With heating zones3x Electric heatingcheck With jacketcheck DC-motor49 kW 460 V 2710 rpm Screw speed300 rpm Inletø 79 mm Feeding with hopperBuss ELS 70 Feeding with metering screw63 rpm MaterialStainless steel 1.4000 (410S) With jacketcheck General TypeMDK70-17D Mach.No.942500 Year of construction1988 Floorspace2 x 0,85 m Total height1,8 m Extra SpecificationsWith 3x temperature control units: Heating medium: thermal oil, electrically heated Max. temp.: 300 °CGeneric medicinesPlastic & polymersCatalysts & fillersMixing extrudersCosmeticsSolid pharmaceuticsDyes & pigmentsMinerals & inorganicBussIndustries > Pharmaceutical > Generic medicinesIndustries > Chemical > P ...

General SKU101Y726 MakeHändle TypeEDR 21-A No.PZ-3445 Year of construction2000 LocationBarneveld Main Features Motor22 KW Length1400 mm Inlet diameter210 mm Specified Features - Double screw extruder Screw press(1x) Double screwcheck Screw diameter210mm Screw length1400mm Motor22,0 kW, 400/690 V Speed± 43 Rpm Inletdia. 245mm With jacket(max. 6 bar) With jacketcheck Double screw extruders MaterialStainless steel General Floorspace3,6x0,9 M Total height1,3 M Weight2950 KG Extra Specifications- Sieve plate housing is missing - Max. pressure 20 barPowdered foodsAgrochemicalsPlastic & polymersDiscountCosmeticsAnimal feedOther feedDouble screw extrudersHaendleIndustries > Food & Feed > Powdered foodsIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plastic & polymersDiscountIndustries > Chemical > CosmeticsIndustries > Food & Feed > Animal feedIndustrie ...

General SKU041H136 LocationBarneveld MakeHändle TypeEDR 21-A No.PZ-3444 Main Features Motor22 KW Length1400 mm Inlet diameter210 mm Specified Features - Double screw extruder Screw press(1x) Double screwcheck Screw diameter210mm Screw length1400mm Shaft diameter100mm Pitch250/140mm Motor22,0 KW, 400/690 Volt Speed± 43 Rpm Inletdia. 245mm With jacket(max. 6 bar) With jacketcheck Double screw extruders MaterialStainless steel General Year of construction2000 Floorspace3,6x0,9 M Total height1,3 M Weight2950 KG Extra Specifications- Max. pressure 20 barPowdered foodsAgrochemicalsPlastic & polymersDiscountCosmeticsAnimal feedOther feedDouble screw extrudersHaendleIndustries > Food & Feed > Powdered foodsIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plastic & polymersDiscountIndustries > Chemical > CosmeticsIndustries > Food & Feed > Animal feedIn ...

General SKU042B319 LocationBarneveld MakeBerstorff Main Features Motor90 KW Inlet diameter150 mm L/D10 Specified Features - Double screw extruder Double screw extruder(1x) Screw diameter150mm L/D10 AC-motor90,0 KW, 380 Volt (Ex) Screw speed± 75 Rpm General TypeZE-130R Silicon tube extruder Mach.No.EO 2900/92 Year of construction1993 Floorspace4,0x1,2 M Total height2,3 M Weight6500 KG ATEX designedcheckPowdered foodsAgrochemicalsPlastic & polymersDiscountCosmeticsAnimal feedOther feedDouble screw extrudersBerstorffIndustries > Food & Feed > Powdered foodsIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plastic & polymersDiscountIndustries > Chemical > CosmeticsIndustries > Food & Feed > Animal feedIndustries > Food & Feed > Other feedExtruders > Double screw extrudersBrand > Berstorff What you can expect from Foeth: -- Machine is in working condition --  ...

General SKU288P487 MakeWerner &: Pfleiderer GmbH (DE) TypeZSK 70 F175E Mach.No.230 196 Year of construction1990 Main Features Motor80 KW Inlet diameter70.5 mm L/D15 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter70,5 mm L/D15,3 Co-rotatingcheck Ventedcheck Number of heating zones:3 Electric heating7+7+5 kW Water coolingcheck DC-motor80 kW (1500 rpm) Screw speed300 rpm Used onpowdercoating MaterialMild steel With jacketcheck General LocationBarneveld With switchgear(as is) Floorspace4,0 x0,9 m Weight5700 kg Extra Specifications- Gearbox ratio 5:1- Including GWK WatercoolerPowdered foodsAgrochemicalsPlastic & polymersCosmeticsAnimal feedOther feedDouble screw extrudersW&PIndustries > Food & Feed > Powdered foodsIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plastic & polymersIndustries > Chemical > CosmeticsIn ...

General SKU103Y799 LocationBarneveld MakeBaker Perkins, Stoke on Trent Sizes Screw diameter30 mm Main Features Motor3 KW Inlet diameter30 mm L/D14 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter30mm, Screw length 420mm L/D14 Co-rotatingcheck Number of heating zones:3 (6x 200 Watt per zone) + die heater Electric heatingcheck Water coolingcheck DC-motor3,0 KW, 180 Volt With variable speed drivecheck Feeding with metering screwdia. 32mm Used ontoner General TypeMPC/V30 Mach.No.65034 Year of construction1985 Floorspace2,0 x 0,9 m Total height2,0 m Weight820 kg Technical specs Extra informationMoC: screw housing The material 1.0762 or 44SMn28 is an unalloyed quenched and tempered steel.Powdered foodsAgrochemicalsPlastic & polymersCosmeticsAnimal feedOther feedDouble screw extrudersBaker PerkinsIndustries > Food & Feed > Powde ...

Size: Screw diameter (Ø): 160 mm Equipments: 1 x feed table, 1 x tube chain conveyor, 1 x mixer 1 x water addition, 1 x extruder, 1 x supply air fan, 1 x cyclone, 1 x rotary valve, 1 x distributor, 1 x belt dryer, 1 x product hopper, 1 x tube chain conveyor, 1 x fine grain hopper, 1 x fine grain discharge, 1 x fine grain bag, 1 x supply air fan, 1 x belt dryer, 1 x rotary valve, 1 x dust bag, 1 x exhaust fan, 1 x airflow rotary dryer, 1 x dedusting, 1 x tumbling screen, 1 x bar removal, 1 x final packaging 1 x belt unit, type: BTK 1510-0 refurbished 2016

General SKU411T126 LocationBarneveld CEcheck MakeClextral Framatome Main Features Motor52 KW Inlet diameter80 mm L/D36 Specified Features - Double screw extruder Double screw extrudercheck Number of hours146.30 Screw diameter32 mm L/D36 Counter rotatingcheck Number of heating zones:8 Steam heatingcheck AC-motor45/52kW, 380-420/440-480/660 Volt, 1480/1780 rpm Feeding with metering screwclextral C0 Number of temperature controllers:8 MaterialStainless steel 1.4306 (304L) General TypeEV 32 Mach.No.B 101 Year of construction2000 With switchgear(as is) Floorspace4,3x1,42 m Total height3.26 Weight3460 kg Extra Specificationsmachine comes with k-tron Feederspecifications:Type LWF D5/ Type K2-ML-T35/DRDia: 400mm feeder inletOutlet: 110mmNew arrivalsDouble screw extrudersClextralNew arrivalsExtruders > Double screw extrudersBrand > Clextral What you can expect from F ...

General SKU219X100 MakeXplore TypeMicro 5 Mach.No.5-03-12 Year of constructionUnknown Sizes Screw diameter10 mm Main Features Motor0.55 KW Inlet diameter5 mm L/D10 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter5-10 mm L/D10 Number of heating zones:6 Electric heatingcheck Air coolingcheck Water coolingcheck DC-motor550 watt, 208-240 volt Screw speed1-400 rpm Capacity5 ml MaterialChromed steel General LocationBarneveld With switchgearcheck Floorspace0,70x0,40 m Total height0,85 m Weight220 kg Extra SpecificationsScrew length 107 mm, volume 5,5 ml., (5 ml.), max barrel temperature 450°C, RKC SR mini touchscreen system, max vertical force 5 kN, pressure 200 barPowdered foodsAgrochemicalsPlastic & polymersCosmeticsAnimal feedOther feedDouble screw extruders-Industries > Food & Feed > Powdered foodsIndustries > Chemical > Ag ...

General SKU204U042 LocationBarneveld MakeWerner &: pfleiderer Sizes Screw diameter70 mm Main Features Motor108 KW L/D23 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter70 mm L/D23 Co-rotatingcheck Water coolingcheck AC-motor108kW, 330Volt, 1500rpm With variable speed drivefrequency controller Screw speed198 rpm Exchangeable segments( not included) MaterialNichrome 2.4869 With jacketcheck General TypeZSK 70F175E Mach.No.231783 Year of construction1996 ( gearbox 2017) With switchgearcheck Sizes switchgear1,25x0,7x2,15 m Floorspace4,6x2 m Total height1,7 m Weight6400 kg Extra Specificationsinlet: 142x130 mm- there are 2 screw shafts present- no screw segments present- no extruder head presentOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalB ...

General SKU292M351 MakeWysstec AG TypePharma-Extruder PHARMEX 35 T & Noduliser SPHAEROMAT 250 T No.11480 Mounted on framecheck Main Features Motor0.55 KW L/D6 Specified Features - Single screw extruder Single screw extrudercheck Screw diameter35 mm L/D6 D AC-motorcheck (1,5 kW Ex) With variable speed drivecheck Screw speed25-150 rpm Feeding with hoppercheck Capacity2-20 kg/h Single screw extruders With variable speed drivecheck (noduliser) MaterialStainless steel 1.4305 (303) Information LocationBarneveld With switchgearcheck Floorspace1,1x0,8 m Total height1,7 m Weight340 kg Extra SpecificationsNoduliser PHAEROMAT 250: - disc diameter: 250 mm - with outlet - with cover - motor: 0,55 kW (Ex) - with variable speed drive - disc speed: 0-1440 rpm Powdered foodsSingle screw extrudersFeed additivesAnimal feedOther feedWysstecIndustries > Food & Feed > Powdered food ...

screw ø:: 30 mm screw length:: 25D screw speedl:: -- U/min drive power:: 4 kW Condition: second-hand Specification: Co-extruder, plastic extruder, type 30-25D as good as new, unused, - Screw diameter: 30 mm - Screw length: 25D - Output approx.: 12–18 kg/h - Raw material: Soft PVC/PE/PP/TPE/TPV (in granule form) - Application: Sealing profiles - DC motor power: 4 kW - Extruder zones: 5 (3 on the barrel, 2 on the die head) - Extruder height: 900–1200 mm - Die head connection: Flange connection - Further details are provided in the annex to the quotation. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Filling line for cans fixed for 330 and 500 ml cans capacity: 6,000 cans/hour for 330 ml cans packaging: 3x4 or 4x6 cans on tray shrinked into foil consisting of: 1. TMG Impianti depalletizer 2. Comac carbonator, year of manufacture: 2007 3. MCD filling and seaming combination, type: 16/4 also manufactured by Comac, year of manufacture: 2007 4. Comac tunnel pasteurizer, year of manufacture: 2007 5. Dimac Star One tray erector, tray packer, and foil wrapping machine The filling line is currently fully assembled and in excellent condition. It is being sold with the associated control equipment and conveyor belts. It can be inspected on request.

Krones can filler blocked with Ferrum can seamer Krones Mecafill with 30 mechanical filling valves Year of manufacturing: 1991 Ferrum can seamer F 308 R (with 6 seaming heads adapted / modified by Imetta / Italy that the can plates are also turning with the machine). Capacity: approx. 14.000 cph by 500 ml standard cans approx. 18.000 cph by 330 ml standard cans can type: standard cans / can type: 211 / 202 with Siemens S 5 with CO2 injection system before seaming The machine was in production until October, 15th 2025 in a brewery in "South Tirol" / Italy. It was professionally dismantled by a German comany and it's now on our stock

Used AVE Mod. RV-4 can line - 600 can per hourTechnical Specifications & Performance DataThis second hand complete canning line is engineered for industrial packaging of oil and other liquid products. Centered on a volumetric automatic linear filler, it provides consistent dosing accuracy for aluminum cans and integrates a dedicated press-on cap application system with pick & place handling. The line includes infeed and accumulation tables with connecting conveyors for streamlined flow between modules. No labeling machine is included, as cans are lithographed.Production speed: 600 containers/hourYear of manufacture: 2001Filling technology: Volumetric, automatic linearFiller model: RV-4Formats: Set up for 2 and 5 liters, but it can also be adjusted for other formatsNo. of filling nozzles: 4Cap application: Automatic press-on capper, single-head (MONOTESTA) with pick & place systemContaine ...

TG CNC Diameter mm 600 Height of center mm 350 with indipentdent 4 JAW Plateau Bison diameter 500 Counterhead Height of center mm 350 with indipentdent 4 JAW Plateau Bison diameter 400 Auction-ID: A1-48745-23

Extruder 70 mm - 24 L/D with pipe head up to 63 mm, calibration tank 6000 mm Caterpillar extractor, saw