can extruder used for sale

General SKU242S148 LocationBarneveld MakeQuadro Engineering Inc (CA) TypeComil 194-S No.194-0950 Year of construction1998 Main Features MaterialStainless steel Motor4 KW Specified Features - Sieve granulator Conical granulating sievecheck Rotor sizesdia. 195x105mm Sieve sizesdia. 200x110mm Sieve perforation0,45 Inletdia. 250mm Outletdia. 250mm Motor4,0 kW 230/400 Volt Speed0-2800 rpm MaterialStainless steel 1.4301 (304) Information Mounted on stainl. st. framecheck Mounted on wheelscheck With switchgearcheck Total height1,9 M Weight320 Kg CEcheck Floor space1,6x0,9 MSieve granulatorsQuadro CanadaSieves > Sieve granulatorsBrand > Quadro Canada What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Nethe ...

General SKU205N024 LocationBarneveld MakeQuadro engineering TypeThe comil 196FS-USDA No.196-0413 Main Features MaterialStainless steel Motor50 KW Width280 mm Specified Features - Sieve granulator Conical granulating sievecheck Rotor sizes280mm Sieve sizesDia. 300x180mm Sieve perforation1mm, 0,5mm InletDia. 200mm OutletDia. 350mm Motor50kW 380/420 Volt With extra sievescheck MaterialStainless steel Information With switchcheck Floor space1,3x0,7m Total height1,6m Weight410kgSieve granulatorsQuadro CanadaSieves > Sieve granulatorsBrand > Quadro Canada What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Inv. Num. : 6788 Type: GN1406TM Producer: GN Canada Created: 2016 Parameters: Equipment: Refrigeration unit EURO CHILLER GC A 015 Extensions for plastic coffee mats (80 mm) Moulding area: 320 mm x 150 mm Drawing depth (negative): 120 mm Drawing depth (positive): 25 mm Sheet width: 380 mm Material thickness range: 0.25mm-1.2mm Material roll diameter: 1000 mm Drying cycles per minute: maximum 45 Machine dimensions: 2400 mm x 1750 mm x 2050 mm Machine weight: 1000 kg After overhauling the main shaft and the motor, the machine is

Cut-off band saw Canali Type: HBSG Saw roller diameter 1000 mm Cutting height approx. 500 mm Motor approx. 11 kW hydraulic feed table incl. some saw blades well-functioning condition

Used dosing unit CANOL, type: P10-E -in bakery condition- 2 pieces available - Built in 1998 and 2000 - Condition: Bakery condition, ready for immediate use - Number of nozzles: 1 piece -El. Connection: 400 V, 50 Hz, 037 kW Viewing and test run are possible by arrangement.

Description: HIGH-PRESSURE FOAMING MACHINE CANNON A-COMPACT 200 FC Possible discharge rate up to 2,600 g/s at a mixing ratio of 1 : 1 (polyol: isocyanate) Tank group Component tank, volume 250 litres Agitator on the polyol tank One mixing head type Cannon FPL 24 HP Hydraulic unit, volume 75 litres with heat exchanger Hose line polyol, isocyanate, hydraulics up to interface A  ,Motors with frequency inverter Dosing unit with two Cannon axial piston pumps, 55 cm3/rev Magnetic coupling on the isocyanate pump Touch screen control panel SIEMENS TP 177 6' SIEMENS S7 control system CHILLER ,FRIGOSYSTEM RACA/C 30 Capacity 2000 l/h Dimensions 800x600x1200 mm Approx. Onsite Dimension. (l x w x h): 3,000 x 2,000 x 2,000 mm, weight approx.: 3,000 kg

Description: HIGH-PRESSURE FOAMING MACHINE CANNON A-COMPACT 200 FC Possible discharge rate up to 2,600 g/s at a mixing ratio of 1 : 1 (polyol: isocyanate) Tank group Component tank, volume 250 litres Agitator on the polyol tank One mixing head type Cannon FPL 24 HP Hydraulic unit, volume 75 litres with heat exchanger Hose line polyol, isocyanate, hydraulics up to interface A  ,Motors with frequency inverter Dosing unit with two Cannon axial piston pumps, 55 cm3/rev Magnetic coupling on the isocyanate pump Touch screen control panel SIEMENS TP 177 6' SIEMENS S7 control system CHILLER ,FRIGOSYSTEM RACA/C 30 Capacity 2000 l/h Dimensions 800x600x1200 mm Approx. Onsite Dimension. (l x w x h): 3,000 x 2,000 x 2,000 mm, weight approx.: 3,000 kg

General SKU213W138 LocationBarneveld MakeQuadro Comil Type196 No.196-1316 Year of construction2006 Main Features MaterialStainless steel Motor7.5 KW Specified Features - Sieve granulator Granulating sievecheck Conical granulating sievecheck Rotor sizes110 mm, 280 mm Sieve sizes310x190 mm Sieve perforation1 mm With hoppercheck Inlet250 mm Outlet350 mm Motor400 volt, 7,5 kW With variable speed drive95-1000 rpm / 0-1800 rpm MaterialStainless steel Information Mounted on stainl. st. framecheck Mounted on wheelscheck With switchcheck Weight490 kg CEcheck Floor space1,50 x 0,9 m Total height1,65 m ATEX compatiblecheckNew arrivalsSieve granulatorsQuadro CanadaNew arrivalsSieves > Sieve granulatorsBrand > Quadro Canada What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination wo ...

1x self-adhesive labeling machine Cirio & C. / Canelli, Italy, as rotary machine with 3 stations, up to 3,500 bph., used, built in 1994, type: Rotativa A.L.9, running direction: left-right, front and back label + neck loops + award points are possible, format parts for: 0.2 + 0.275 + 0.33 + 0.5 + 0.75 + 1.0 ltr. Bottles are included, in working condition at a special price: €2,900 plus VAT from stock Dolgesheim

Description: From DIN A3 to DIN A5 Approx. Onsite Dimension. (l x w x h): 750 x 600 x 1,200 mm, weight approx.: 70 kg

General SKU213W135 LocationBarneveld MakeQuadro Comil Type197 U No.197-1131 Year of construction2002 Main Features MaterialStainless steel Motor1.5 KW Specified Features - Sieve granulator Granulating sievecheck Conical granulating sievecheck Rotor sizesDia. 110x60 mm Sieve sizesDia. 110x80 mm Sieve perforation0,5 mm With hoppercheck InletDia. 70 mm OutletDia. 150 mm Motor1,5 kW (400 V, 1405 rpm, EX) With variable speed driveFreq. drive Speed3500 rpm MaterialStainless steel 1.4306 (304L) Information Mounted on stainl. st. framecheck Mounted on wheelscheck With switchcheck Weight136 kg CEcheck Floor space1,35 x 0,90 m Total height1,40 m ATEX compatiblecheck Extra SpecificationsWith Servo lift, mobile lifter, load cap. 100 kg New arrivalsSieve granulatorsQuadro CanadaNew arrivalsSieves > Sieve granulatorsBrand > Quadro Canada What you can expect from Foeth: ...

Description: 5,705 KWp New solar modules 2x Canadian Solar CS3L-360MS, 1x Longi LR4-60HPB-360M, 1x Jolywood JW-HD120N-380, 3x Denim M2B375BT620H, 2x Longi LR4-60HPH-375M, 3x Risen RSM40-8-390MB, 3x URECO FBK400MFD solar modules packed ever 15 solar modules on a pallet. Pallet NO. 3 Nominal power per solar module: 360 Wp - 400 Wp Condition of solar modules: New Logistical data solar modules: 1,770 mm x 1,048 mm x 35 mm, 1,754mm x 1,037mm x 34mm, 1,756mm x 1,038mm x 35mm, 1,754mm x 1,037mm x 35mm, 1,254mm x 1,038mm x 35mm, 1,750mm x 1,095mm x 30mm, 1,722mm x 1,133mm x 30mm Logisticdata: Dimensions pallet: approx. 1,850 mm x 1,200 mm x 675 mm Weight pallet modules: approx. 332 kg Total weight: 332 kg Total packages: 1 Illustration similar. Approx. Onsite Dimension. (l x w x h): 1,850 x 1,200 x 675 mm, weight approx.: 332 kg

Description: 6,235 KWp New solar modules JA-Solar JAM60S02-300/PR, Canadian CS3L-375MS, Trina TSM400DE09.08, Trina TSM-390DE09.05, Canadian CS6R-400MS, Phono-Solar PS400M6H-18NH solar modules packed with 16 solar modules each on a pallet. Pallet NO. 5 Nominal power per solar module: 365 Wp - 400 Wp Condition of solar modules: New Logistical data solar modules: 1,668 mm x 1,050 mm x 35 mm, 1,764mm x 1,047mm x35mm , 1,753mm x 1,095mm x 30mm , 1,754mm x 1,096mm x 30mm , 1,754mm x 1,096mm 30mm , 1,721mm x 1,133mm x 30mm , 1,720mm x 1,132mm x 30mm Logisticdata: Dimensions pallet: approx. 1,850 mm x 1,200 mm x 740 mm Weight pallet modules: approx. 359 kg Total weight: 359 kg Total packages: 1 Illustration similar. Approx. Onsite Dimension. (l x w x h): 1,850 x 1,200 x 740 mm, weight approx.: 359 kg

Description: The foaming machine described below is designed for foaming sandwich elements. PRODUCT Panels for cold rooms DIMENSIONS Length x width max. 2,400 x 1,350 mm min. 600 x 180 mm Thickness: 40 ... 120 mm CAPACITY Press type: 2 + 2 Press table dimensions: 6,500 x 1,600 mm Number of press tables: 4 pieces , Occupancy of press table: 1 piece Extension of pressing tables: 60 sec Curing time / dwell time in the press: 15 - 45 min Occupancy rate: 0.9 Shifts: 2 pieces , Working time per shift: 8 h Panels per shift: 48/72 pieces Depending on foam thickness and raw material GROUND DATA (this set-up) Mixing ratio: 100 : 140 (polyol : isocyanate) Dosage - max: 1100 g/s per mixing head Specific gravity: Polyol 1.0 Isocyanate 1,2 Density: 45 - 60 kg/mÑ Start time: 20 sec (Other raw material data can of course be used for other applications) SYSTEM COMPONENTS Componen ...

KUHNE EXTRUDER KF70E & CO. EXTRUDER K45-24D Power: 800-1000 kg/h Max. film width 700-800 mm Equipment / Additional information: The machine is constructed as follows: -Colotronic dosing unit CSK30 with 4 components -Kuhne smooth and cooling rolls (calendering) / GA4/900; puller: BA2-1/900 -Foil nozzle // Max. film width 700-800 mm Fully existing infrastructure; control cabinets, pumps, etc. Material PS and PP were processed

General SKU004K022 LocationBarneveld MakeKraftanlagen Heidelberg TypeST-350/6D No.91.02 4295916 Year of construction1991 Main Features Motor180 KW Inlet diameter350 mm L/D6 Specified Features - Single screw extruder Single screw extruderPin extruder (1x) Screw diameter350mm L/D6 With jacketcheck DC-motor180 KW, 440 Volt + 53,7 KW, 400 Volt Inlet350x285mm Screw can be heatedcheck Information Without switchgearcheck Floorspace5,5x1,7 M Total height2,0 M Weight11.000 KG Extra Specifications- With die head for 167 strands - With die face cutter - Extruder can be used for PVC Single screw extrudersHeidelberg KrafExtruders > Single screw extrudersBrand > Heidelberg Kraf What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in B ...

Nakata Zoki Kobe, Japan (Troester design) Duplex Extruder Unit Dual 150mm dia PIN Type Extruders, Year of manufacture: 1990, with Roller Feed, and duplex Die. L/D ratio 16:1 Number of Pins: 10 Rows x 8 Pieces, Spare Pins included. Screw Speed 45 r.p.m. Motors 185kw D.C. variable speed, 415 volt, 3ph, 50hz. Full Books and Drawings available. Thyristor Drives included. Starter and Control Panel for Lower Extruder only. Die usable Width 18\\, In good condition.

Francis Shaw 90mm coldfeed rubber extruder.Year: 1992. Machine No.4846Vented. Side power roller feed,L/D ratio 20:1,H series David Brown gearbox,Thrige Scott 63kW, 2000rpm DC variable speed motor.Machine fully overhauled, cleaned/painted and fitted with NEW electrical control panel. With provision for 5 x TCU's.

Thank you for your interest in our gum extruder system we offer you as follows: many thanks for your interest on our new chewing gum extruder plant, please follow our offer find: AUTOMATIC EXTRUDING; ROLLING AND SCORING MACHINE 7 ´ ´ /. COMPLETE LINE for production of chewing gum sticks and Chiclets Manufacturer: WLS Type: Chewing gum Extrudier-, rolling and cutting machine gum extruder, rolling and cutting system Product: Chewing gum sticks and Chiclets Size (working width): 7 ´ ´ / 177mm other dimensions are possible on demand Type: WLS RAS 7 "with manual take-off Capacity: Approx stick gum. 200-250 kg / h / Chiclets approx. 250-350 kg / h Number of rolling stations: 4 Number of cutting stations: 2 Electrical: 400V 3 ph 7 "ROLLING AND SCORING MACHINE incl. EXTRUDER Conveyor belt is covered with powderin ...

8" Cold Feed Rubber Extruder

Dominioni Punto & Pasta Pasta extruder machine Stainless 8Kg hopper with agitator and stainless screw, variable speed, variety of extrusion plates for different style pastas, mobile

available Troester Triplex Extruder Top machine QSM 90x 16D Middle machine 200W x 6D Below machine QSM 150 x 16D Head MW500 Description attached!

vertical design, for simultaneous extruding of 4 strands, Sausage masses, etc. each strand with a diameter of approx. 15 mm, Capacity approx. 15 l, Drive 1.5 kW

Description TWIN HELIX EXTRUDER Screw Diameter 90 mm L/D 30 Screw Speed 161 rpm Barrel Zones 5 Motor Power 91Kw Motor Speed 1750 rpm Automatic Screen Changer Produced Material PP & PE

Jwell 92/188 Conical Twin Screw Extruder - Granular Line Machine has been used 1 year It is in excellent condition Capacity : 700 kg / hour It will be given with the granule front line.

General SKU354T966 LocationBarneveld MakeClextral TypeBC45 Mach.No.876 Main Features Motor21 KW Inlet diameter105 mm L/D28 Specified Features - Double screw extruder Double screw extrudercheck Number of hours1223 Screw diameter55 mm L/D28 Counter rotatingcheck Number of heating zones:5 Electric heatingcheck 7kW each Water coolingcheck DC-motor21 kW, 430 Volt Screw speed50-300rpm Feeding with hoppercheck Exchangeable segmentscheck MaterialMild steel Information Year of construction1990 With switchgearcheck(as is) Sizes switchgear3,3x0,62x2,26 m Total height2,3 m CEcheck Floorspace4,25x1,25 m Weight2300kg Extra Specificationsmachine comes with additional parts. the screw consists of segments specifications p34 cutter: 2.2kW, 380/420 volts, 2280rpm Double screw extrudersClextralExtruders > Double screw extrudersBrand > Clextral What you can expect from Foeth ...

General SKU231U203 LocationBarneveld MakeLeistritz TypeSZE-50 GL Mach.No.94.91.2168/7 Main Features Motor52 KW Inlet diameter49.7 mm L/D42 Specified Features - Double screw extruder Double screw extrudercheck Number of hours31783 Screw diameter49,7 mm L/D42 Co-rotatingcheck Number of heating zones:9 Electric heating33 kW Water coolingtype: ZIK - (Zylinder Intensiv Kühlung, eng. Barrel intensive cooling) DC-motor46 kW, 460 Volt AC-motorside dosing screw of the extruder: 1,5 kW 230-400 Volt Screw speedmax. 400 rpm MaterialNitriding Steel 1.8550 Information Year of construction1994 Sizes switchgearcheck(as is) Total height1,9 m CEcheck Floorspace4,26x0,80 m Weight2000 Extra Specificationspower cabinet dimention: 2,26x0,62x2,2 mDouble screw extrudersLeistritzExtruders > Double screw extrudersBrand > Leistritz What you can expect from Foeth: -- Machine is in wo ...

General SKU354T968 LocationBarneveld MakeWerner & PFleiderer TypeContinua 37/27 D Mach.No.220331 Sizes Screw diameter37 mm Main Features Motor7.6 KW L/D27 Specified Features - Double screw extruder Double screw extrudercheck Number of hours284222 Screw diameter37 mm L/D27 Co-rotatingcheck Number of heating zones:5: 1 cooling: 4 heating Steam heatingcheck DC-motor7,6 kW 440 Volt With variable speed drivecheck Screw speed0-400 rpm Exchangeable segmentscheck Number of temperature controllers:5 MaterialMild steel Information Year of construction1985 With switchgearcheck (as is) Total height2,3 m Floorspace3,2x1,3 m Weight1700 kg Extra Specificationswith extra screwsDouble screw extrudersWerner & PfleidererExtruders > Double screw extrudersBrand > Werner & Pfleiderer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compar ...

General SKU411T126 LocationBarneveld MakeClextral Framatome TypeEV 32 Mach.No.B 101 Main Features Motor52 KW Inlet diameter80 mm L/D36 Specified Features - Double screw extruder MaterialStainless steel 1.4306 (304L) Double screw extrudercheck Number of hours146.30 Screw diameter32 mm L/D36 Counter rotatingcheck Number of heating zones:8 Steam heatingcheck AC-motor45/52kW, 380-420/440-480/660 Volt, 1480/1780 rpm Feeding with metering screwcheck clextral C0 Number of temperature controllers:8 Information Year of construction2000 With switchgearcheck(as is) Total height3.26 CEcheck Floorspace4,3x1,42 m Weight3460 kg Extra Specificationsmachine comes with k-tron Feeder specifications: Type LWF D5/ Type K2-ML-T35/DR Dia: 400mm feeder inlet Outlet: 110mm Double screw extrudersClextralExtruders > Double screw extrudersBrand > Clextral What you can expect from Foeth ...

General SKU402S949 LocationBarneveld MakeBuss TypeLR 100-19D Mach.No.438004-2 Main Features Motor45 KW Inlet diameter100 mm L/D21 Specified Features - Mixing extruder Single screw mixing extrudercheck Screw dia.100 mm L/D2100/100 With jacketcheck Screw speed300 rpm Inletdia. 100 mm (5x) Screw can be heatedcheck Max. temperature180 °C MaterialStainless steel Information Year of construction1993 Mounted on framecheck Total height1,5 m Floorspace3,3x1,5 m Weight2200 kg Extra SpecificationsEasy to clean. Material: 1.4308 and 1.4122 Mixing extrudersBussExtruders > Mixing extrudersBrand > Buss What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machi ...

General SKU292M349 LocationBarneveld MakeBerstorff TypeZE-25 Mach.No.EO 0324/88 Main Features Motor6 KW Inlet diameter25 mm L/D20 Specified Features - Double screw extruder Double screw extruder(1x) Screw diameterdia. 25x500mm L/D20 Number of heating zones:3 Electric heatingcheck Water coolingcheck DC-motor6 KW, 200 Volt Screw speed0-450 Rpm Feeding with hoppercheck Feeding with metering screwcheck Information Year of construction1989 With switchgear( as is ) Sizes switchgear0,8x1,0x2,0 M Floorspace1,8x0,8 M Total height1,1 M Weight450 KG Extra Specifications incl. tempereer eenheid 3,5 KW, 380 Volt. THERE ARE NO SCREWS WITH THIS MACHINE !Double screw extrudersBerstorffExtruders > Double screw extrudersBrand > Berstorff What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destina ...

General SKU300P748 LocationBarneveld MakeAPV Baker Industrial Extruder Division Ltd (UK) Mach.No.WEF960037 724/1 Main Features Motor3 KW Inlet diameter50 mm L/D20 Specified Features - Double screw extruder Double screw extrudercheck Number of hours567 Screw diameter50mm L/D20 Co-rotatingcheck Number of heating zones:1 Steam heatingcheck Water coolingcheck AC-motor3,0 KW, 230/400 Volt With variable speed drivecheck Number of temperature controllers:1 Used onicecream MaterialStainless steel Information Year of construction1996 With switchgearcheck Floorspace2,6x1,2 M CEcheck Total height1,6 M Weight1100 KG Technical specs Extra informationscrews form stainless steelDouble screw extrudersAPV ProductsExtruders > Double screw extrudersBrand > APV Products What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- ...

General SKU095Y843 LocationBarneveld MakeWerner & Pfleiderer TypeZSK-170 W-1750 5G Mach.No.221 071 Main Features Motor760 KW Inlet diameter170 mm L/D14 Specified Features - Double screw extruder Double screw extruder(1x) Screw diameter170mm, Screw length 2500mm L/D14,7 Co-rotatingcheck Electric heatingon housing no. 2, 3, 4 en 5 (65,8 KW) DC-motor760 KW, 6000 Volt Screw speed± 198 Rpm Used onDMD Information Year of construction1986 Without switchgearcheck Floorspace14,0x4,0 M Weight21.000 KG Extra Specifications :- Barrel material 1.8519, screw material 1.2344 Double screw extrudersWerner & PfleidererExtruders > Double screw extrudersBrand > Werner & Pfleiderer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Ba ...

General SKU011C013 LocationBarneveld MakeLeistritz TypeZSE-110 Year of construction1986 Main Features Motor110 KW Inlet diameter110 mm L/D20 Specified Features - Double screw extruder Double screw extruder(1x) Screw diameter110mm L/D20 Counter rotatingcheck Number of heating zones:4 Electric heatingcheck DC-motor10-110 KW Information Mach.No.86.02.1822 With switchgearcheck Sizes switchgear120x70x230 CM Floorspace4,7x1,4 M Total height2,2 MDouble screw extrudersLeistritzExtruders > Double screw extrudersBrand > Leistritz What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU304P676 LocationBarneveld MakeAPV Chemical Machinery Ltd TypePGX 30 Mach.No.800471 Main Features Motor4 KW Inlet diameter30 mm L/D10 Specified Features - Double screw extruder Double screw extrudercheck Number of hours19187 Screw diameter30mm L/D10 Co-rotatingcheck Water coolingcheck AC-motor4,0 KW With variable speed drivecheck Screw speed(161rpm) Feeding with hopperdia.340mm x400mm Feeding with metering screwK-Tron T-22 twinscrew, Motor feeder 0,55 KW, Motor agitator 0,18 KW Number of temperature controllers:1 Capacity30 KG/Hr MaterialStainless steel 1.2379 (X153 CrMoV12), Stainless steel Information Year of construction1989 With switchgearcheck Floorspace1,8x0,8 M Total height2,2 M Extra Specificationswith extrudermold dia.1mm Double screw extrudersAPV ProductsExtruders > Double screw extrudersBrand > APV Products What you can expect from Foet ...

General SKU321S566 LocationBarneveld MakeWLS Gabler (D), Pressquick PQ 12 TypeE-60/10 D No.12355 Year of constructionUnknown Main Features Motor3 KW Inlet diameter345 mm L/D3 Specified Features - Single screw extruder Single screw extrudercheck Screw diameter60mm, Screw length 180mm L/D3 With jacketcheck AC-motor3.0 kW, 220/380 Volt With variable speed drivecheck Screw speed9-89 Rpm Inlet345x250mm Feeding with hopper- incl. mixer MaterialStainless steel Information With switchgearcheck Total height1.35 M Weight560 Kg Floorspace1.8 x 0.7 M Extra Specifications: Without die plate Single screw extrudersWLS GablerExtruders > Single screw extrudersBrand > WLS Gabler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in B ...

General SKUR1061 LocationBarneveld MakeKrupp Werner & Pfleider TypeZSK 50 P8.15E Mach.No.20474395 Main Features Motor51 KW Inlet diameter50 mm L/D42 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter50mm L/D42,4 Co-rotatingcheck Number of heating zones:10 Electric heatingcheck Water coolingcheck Feeding with hopper(3x) Feeding with metering screwcheck MaterialStainless steel 1.2379 (X153 CrMoV12) Information Year of construction2000 With switchgear(2x) Sizes switchgear0,9x0,6x2,1 M (1x) 1,6x0,6x2,1 M (1x) Total height1,5 M Floorspace4,7x1,1 M Weight4000 Kg Extra SpecificationsWith twin screw side entry Werner &: Pfleiderer ZS-B 58 with 3 x K-tron dosing screws including funnels including 2x vibrating chute and including Bredel hose pump SP / 32 Double screw extrudersW&PExtruders > Double screw extrudersBrand > W&P What you ca ...

General SKU103Y799 LocationBarneveld MakeBaker Perkins, Stoke on Trent TypeMPC/V30 Mach.No.65034 Main Features Motor3 KW Inlet diameter30 mm L/D14 Specified Features - Double screw extruder Double screw extruder(1x) Screw diameter30mm, Screw length 420mm L/D14 Co-rotatingcheck Number of heating zones:3 (6x 200 Watt per zone) + die heater Electric heatingcheck Water coolingcheck DC-motor3,0 KW, 180 Volt With variable speed drivecheck Feeding with metering screwdia. 32mm Used ontoner Information Year of constructionunknown Floorspace2,0x0,9 M Total height2,0 M Weight820 KGDouble screw extrudersBaker PerkinsExtruders > Double screw extrudersBrand > Baker Perkins What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barn ...

General SKU054Z210 LocationBarneveld MakeLalesse Arnhem B.V. TypeUniverseel No.75-704 Year of construction1976 Main Features Motor11 KW Inlet diameter47 mm L/D12 Specified Features - Single screw extruder Single screw extruder(1x) Screw diameter47mm, Screw length 600mm L/D12 Number of heating zones:2 Electric heatingcheck AC-motor11,0 KW, 380 Volt With variable speed drivecheck Screw speed± 20-123 Rpm Feeding with hoppercheck Number of temperature controllers:check Information With switchgearcheck Floorspace2,3x1,3 M Total height1,7 M Weight1140 KGSingle screw extrudersLalesse ArnhemExtruders > Single screw extrudersBrand > Lalesse Arnhem What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlan ...

General SKU101Y726 LocationBarneveld MakeHändle TypeEDR 21-A No.PZ-3445 Year of construction2000 Main Features Motor22 KW Length1400 mm Inlet diameter210 mm Specified Features - Double screw extruder MaterialStainless steel Double screw extruders Screw press(1x) Double screwcheck Screw diameter210mm Screw length1400mm Motor22,0 KW, 400/690 Volt Speed± 43 Rpm Inletdia. 245mm With jacket(max. 6 bar) Information Floorspace3,6x0,9 M Total height1,3 M Weight2950 KG Extra Specifications- Sieve plate housing is missing - Max. pressure 20 bar Double screw extrudersHaendleExtruders > Double screw extrudersBrand > Haendle What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Bar ...

General SKU041H136 LocationBarneveld MakeHändle TypeEDR 21-A No.PZ-3444 Year of construction2000 Main Features Motor22 KW Length1400 mm Inlet diameter210 mm Specified Features - Double screw extruder MaterialStainless steel Double screw extruders Screw press(1x) Double screwcheck Screw diameter210mm Screw length1400mm Shaft diameter100mm Pitch250/140mm Motor22,0 KW, 400/690 Volt Speed± 43 Rpm Inletdia. 245mm With jacket(max. 6 bar) Information Floorspace3,6x0,9 M Total height1,3 M Weight2950 KG Extra Specifications- Max. pressure 20 bar Double screw extrudersHaendleExtruders > Double screw extrudersBrand > Haendle What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in ...

General SKU042B319 LocationBarneveld MakeBerstorff TypeZE-130R Silicon tube extruder Mach.No.EO 2900/92 Main Features Motor90 KW Inlet diameter150 mm L/D10 Specified Features - Double screw extruder Double screw extruder(1x) Screw diameter150mm L/D10 AC-motor90,0 KW, 380 Volt (Ex) Screw speed± 75 Rpm Information Year of construction1993 Floorspace4,0x1,2 M Total height2,3 M Weight6500 KG ATEX compatiblecheckDouble screw extrudersBerstorffExtruders > Double screw extrudersBrand > Berstorff What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU288P487 LocationBarneveld MakeWerner & Pfleiderer GmbH (DE) TypeZSK 70 F175E Year of construction1990 Main Features Motor80 KW Inlet diameter70.5 mm L/D15 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter70,5mm L/D15,3 Co-rotatingcheck Ventedcheck Number of heating zones:3 Electric heating7+7+5 KW Water coolingcheck DC-motor80 KW, Screw speed300 rpm Used onpowdercoating MaterialMild steel Information Mach.No.230 196 With switchgearcheck Floorspace4,0x0,9 M Weight5700 KG Extra SpecificationsIncluding GWK Watercooler, : Double screw extrudersW&PExtruders > Double screw extrudersBrand > W&P What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands.  ...

General SKUR1123 LocationBarneveld MakeWLS Gabler Maschinenbau KG (D) TypeDE 100/100 No.12482 Year of construction1992 Main Features Motor18.5 KW Inlet diameter100 mm L/D9 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter100mm L/D9.4 Co-rotatingcheck Number of heating zones:2 AC-motor18,5 kW 380/660 Volt Feeding with hoppercheck MaterialStainless steel Information With switchgear( as is ) Total height1,7 M Weight2150 Kg Floorspace2,5x1,3 M Extra SpecificationsIncluding 1 piece Single Temperiertechnik heating units STW 150 / 1-9-20-K1S 9 kW 400 Volt including 2 spare screws Double screw extrudersWLS GablerExtruders > Double screw extrudersBrand > WLS Gabler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome ...

General SKU411U1293 LocationBarneveld MakeGea TypeConsiGma 1 Mach.No.10CG001002 Sizes Screw diameter22 mm Main Features Motor9 KW Inlet diameter40 mm L/D20 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter25 mm L/D20 Co-rotatingcheck Number of heating zones:1 Oil heatingcheck Feeding with hoppercheck 6 Ltr. Feeding with metering screwcheck Exchangeable segmentscheck Number of temperature controllers:1 Capacity25 kg/uur Double screw extruders Outlet50 mm MaterialStainless steel 1.4404 (316L) Information Year of construction2011 Mounted on wheelscheck CEcheck With switchgearcheck Floorspace1,80 x 1,10 m Total height1,72 m ATEX compatiblecheck Extra SpecificationsWith Brabender feeder, type DDW-MD3-DDSR20-5Q HYD,Twin screw granulator,one dryer segment,touchscreen control - Powder dosing max. 25 kg/hour- Liquid injection  ...

Conic 60/126 extruder Machine can be seen in working condition Machine has been worked on PVC material

Extruder 70 mm - 24 L/D with pipe head up to 63 mm, calibration tank 6000 mm Caterpillar extractor, saw

1 x David Bridge 15/18\ Dump Extruder with 40\ Face x 20\ die Roller Die. Spare parts available. Screw L/D 5:1, Crammer. Length of Barrel 7ft. Right angle turning unit for product flow. 200HP DC variable speed motor

Kobelco Twin Screw Roller Head Extruder (horizontal type), Model TSR-330 Roller die assembly (TSR-33H005H) 38in wide x 16in dia Roller die moves away from the extruder/mixer section via hydraulic ram. driven by 102kW DC variable speed motor through Hansen reduction gearbox (on flexible coupling so roller die can move forwards/back). Twin screw dump extruder 330mm screw dia driven by 90kW DC variable speed motor through Hanson reduction gearbox. In very good condition. Previously running underneath an F270 Banbury. Complete with all controls, manuals and documentation etc.

Francis Shaw 18/22\ Dump Extruder, Crammer feed Length of Screw 9ft 6\. Reliance 400hp D.C., 1150 r.p.m., 480 volt. Large Hopper/Chute to next floor level.