can extruder used for sale

TECNOVA MONO SCREW EXTRUDER 130 mm 54 L/D double degassing system For LDPE HDPE PP PC PS ABS, Average output 400/600 kg/h depending on material and feeding rate, Total installed power 530 kw, – about 318 kw used in work Construction year 2015 Screw diam. 130 mm 54 L/D Bi-metallic barrel A.c. motor 200 Kw + inverter Double degassing system (degassing points about 2 mt.apart for excellent results) non-stop screen changer with diam.300 mm screens AVAILABLE FITTED WITH FULLY AUTOMATIC SCREEN-CHANGER NEW or USED Hydraulic pack Vented electric cabinets Water ring pelletizer Stainless steel centrifugal drier Vent The line is offered TOTALLY RECONDITIONED Find out on our how we recondition [HERE](https://www.germanplast.eu/pages/photo-gallery), possible addition of vibro classifier, bag filling/weighing station, upstream equipment, Availble on request: scrap silo + auger + crammed feeder, [h ...

for PE PP PS PC ABS, Barrel with screw Ø 130 mm. 35 L/D, feeding hopper Vacuum degassing pump Non-stop hydraulic screen changer Water ring pelletizer Drying centrifuge Water tank and heat exchanging unit N.2 control cabinets Offered AS IS

THERMO FORMING MACHINE ILLIG RDM K 50 WITH INLINE EXTRUDER (COMPLETE LINE) M. No.: 322 Counter: 80188 hours // Power: 800-1000 kg/h Max. film width 700-800 mm Equipment / Additional information: The machine is constructed as follows: -Kuhne Extruder KF70E & Co. Extruders K45-24D -Colotronic dosing unit CSK30 with 4 components -Kuhne smooth and cooling rolls (calendering) / GA4/900; puller: BA2-1/900 -Thermoforming machine ILLIG RDM K 50 -Greiner stacking / Transfer device R3 (No.:00020) // Age: 1998 -Illig mill RS75B // Age: 1999 Fully existing infrastructure; control cabinets, pumps, etc. Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp

AMUT PIPE-PROFILE EXTRUDER, twin screw extruder with screw Ø 67 mm. 22 L/D, Including:, 1.000 x 100 mm,pull off unit, reconditioned with totally renewed control panel, machine in excellent conditions

WELEX SHEET CO-EXTRUSION LINE, running with ABS and PS, extruder 115 mm screw diam. 30 L/D, degassing system, 225 kw drive, 190 rpm screw speed, hydraulic screenchanger, hydraulic pack and accumulator, Maag gear pump 56/56, water cooled, gravimetrical blenders, Motan dehumidifying dryers, + Covema co-extruder with 60 mm screw diam. 24 L/D, 175 rpm, electrically heated, air cooled barrel, 18,5 kw drive, 1.650 mm EDI R75 ultraflex die., Flex range on the top lip of up to 1.9 mm. Mounted gap is ca 2.6 mm., Bottom lip is removable and has slotted bolt holes, adjustable to achieve a wider thickness range., One spare bottom lip available - thickness to be checked, 1650 x 400 mm Ø rolls, Static mixer, ABA co ex block with plate type inserts, 1.650 mm 3 roll polishing stack model 18x65 LHSL. 450 mm diameter rolls. Chain driven through selector gearbox. circa 5 hp dc motor. Upstack configuration ...

General SKU292M351 LocationBarneveld MakeWysstec AG TypePharma-Extruder PHARMEX 35 T & Noduliser SPHAEROMAT 250 T No.11480 Main Features Motor0.55 KW L/D6 Specified Features - Single screw extruder Single screw extrudercheck Screw diameter35 mm L/D6 D AC-motorcheck (1,5 kW Ex) With variable speed drivecheck Screw speed25-150 rpm Feeding with hoppercheck Capacity2-20 kg/h Single screw extruders With variable speed drivecheck (noduliser) MaterialStainless steel 1.4305 (303) Information Mounted on framecheck With switchgearcheck Floorspace1,1x0,8 m Total height1,7 m Weight340 kg Extra SpecificationsNoduliser PHAEROMAT 250: - disc diameter: 250 mm - with outlet - with cover - motor: 0,55 kW (Ex) - with variable speed drive - disc speed: 0-1440 rpm Other feedAnimal feedSingle screw extrudersPowdered foodsFeed additivesWysstecIndustries > Food & Feed > Other feedInd ...

Most of the components of the line have been sold independently. Remaining for sale now: Single screw extruder Pagani-Italy ⲫ60x 1700 [mm]; 32KW engine; 6 heating zones with potentiometer The pictures show other elements which were previously for sale, but this is not the case anymore. ONLY THE SINGLE SCREW EXTRUDER is for sale. The price shown online is for the single screw extruder too.

for HDPE LDPE PC PS ABS, nominal throughput rate 350-400 kg/h including:, loading belt, metal detector, Meccanoplastica Granulator 600 mm., n.3 + 2 knives 550 mm long, 37 kw drive, extraction vent buffer silo with agitators extraction screw, crammed feeder extruder with 105 mm screw diameter 36 L/D, vacuum degassing pump semi-automatic, non stop hydraulic screenchanger hydraulic pack water ring pelletizer drying centrifuge electric cabinet CE compliance The line is offered RECONDITIONED - see[how we recondition at Germanplast](https://www.germanplast.eu/pagine/photo-gallery)

Low & Duff Macintyre Extruder Extruder, Lozenge machine, hopper and six screws (500mm) extruder, previously used for extruding fudge, with manual, 3Ph

Equipments: 1 x supply air fan, 1 x belt dryer, 1 x rotary valve, 1 x cyclone, 1 x rotary valve, 1 x distributor, 1 x belt unit, type: BTK 1510-0 1 x water addition, 1 x extruder, 1 x supply air fan, 1 x feed table, 1 x tube chain conveyor, 1 x mixer 1 x dedusting, 1 x tumbling screen, 1 x bar removal, 1 x final packaging 1 x fine grain hopper, 1 x fine grain discharge, 1 x fine grain bag, 1 x belt dryer, 1 x product hopper, 1 x tube chain conveyor, refurbished 2016 1 x dust bag, 1 x exhaust fan, 1 x airflow rotary dryer,

Single screw degassing extruder CFE-699-A-04 for polymers manufactured by KELLER (USA) and KOBE STEEL (Japan) under a DUPONT license. The extruder has the following parameters: Overall dimensions of the extruder, taking into account the gearbox and motor - length 12 meters, width -2.5 meters, height -1.5 meters, the total diameter of the casing with a heating-cooling jacket is 950 mm, the diameter of the screw is 600 mm, screw length -7800 mm. The average screw speed is 22-25 rpm. The total weight of the extruder without spare parts is 40 tons. The working pressure in the casing is up to 300 bar, the working temperature of heating the melt is up to 300 degrees. The casing of the extruder is heated by high temperature oil supplied to it. The average productivity of polymers is 50-100 tons per hour. The extruder is equipped with a parallel reducer of POWER-TECH INTERNATIONAL (FOOT-JONES)  ...

Dries, reduces size and degasses materials in one step. For PE PP PET PS ABS PC PET PVC POLYLAMINATED, PULPER etc. Low maintenance costs No operator needed High ROI Huge output, heavy duty, made for 24/7 job 400 kw drive (260 kw in work) Italian technology and material quality standards. Output in a continuous flow The melted plastic can feed extruder directly with high energy saving, to be filtered and granulated, thus forming a complete, automatic line from scraps to granule We can provide the special extruder needed for the purpose. The line includes normally : buffer with extraction screws on supporting structure + extruder with motor, gearbox, pulpit control panel, + electric cabinet + strand matrix On separate request : cooling calander, cooling belt, conveyor belt to buffer, metal detector, square matrix with hydraulic pack (for special purposes) Post-sale assistance for spares, a ...

For sale: Bragernes aut. coreless rewinder, year 1981, web width 1000 mm, Unwind dia. 1000 mm. Can make rolls from 5 m up to outside dia. 50 mm With web guide and tension control. Available: Now

Capstan engine for AccuSet - all the details can be seen on the picture. The engine is tested and comes from a working AccuSet. Available on stock

Capstan sensors for AccuSet - all the details can be seen on the picture. The sensors are tested and come from a functional AccuSet. Available on stock

Cheap used and new seeCONTAINER for sale in different versions! From current stock we can offer used and new sea containers for sale / leasing / rental: - 20ft (6m) Standard Box Container - 40ft (12m) Standard Box Container - 40ft (12m) High Cube Container - 20ft (6m) office container - 20ft (6m) sanitary container Special versions such as Double Door, Flat or Open Top are always available at short notice. Sightseeing is possible at any time and at short notice, for this we ask for a short telephone arrangement. Sea containers are extremely stable and are made of 2mm-sifted rust-coated Corten steel, which is also coated with saltwater-resistant ship paint. They have a reinforced forklift-passable floor, which is covered with 28mm waterproof hardwood floor. 20 feet (6m) of sea containers have two forklift pockets incorporated into the floor scaffolding and can theref ...

cutting knife for AccuSet - all details can be seen on the picture. The cutting knife is tested and comes from a functional AccuSet. Available on stock

motor of the input cartridge for AccuSet - all details can be seen on the picture. The engine is tested and comes from a working AccuSet. Available on stock

input cartridge for AccuSet - all details can be seen on the picture. The cassette is tested and comes from a working AccuSet. Available on stock

Manufacturer: LUKAS / JAWES OF LIVE New device with warranty for cutting cables, car parts, usable in recycling Cutting device LSI 200 Mouth width: 125 mm Weight: 13.8 kg Lukas cable shears Hydraulic cable shear for the mobile use. New machine The type LS/ 200 can be used very good to handle with heavy cable. Because of its excellent shear forces it saves much time. Its low weight makes it possible to work economically. The unique Lukas Star Grip valves makes it easy to use. The cutter blades can be resharpened. This makes a long service life. Operating pressure: 50 MPa Shear forces: up to 270 kN Width of mouth: up to 125 mm Dimensions: l/w/h 680 x 190 x 163 mm Weight: 13.8 kg. Hydraulic power system Operating pressure: 50 MPa Oil tank: 9l Output: low pressure 4.4 l/min high pressure 1.4 l/min Power: 1.5kW with 3000 min-l /230 V Dimensions: l/w/h 372 x 312  ...

motor in front of the accretorial cassette for AccuSet - all details can be seen on the picture. The engine is tested and comes from a working AccuSet. Available on stock

cassette for AccuSet - all details can be seen on the picture. The cassette is tested and comes from a working AccuSet. Available on stock

laser unit for ProSet9400 - all details can be seen on the pictures. The lasers come from a functional ProSet. Available on stock

Machine type: hydr. Hacksaw Make: KASTO Germany Type: WBS 150 / 170 Machine No. No. 116 004 1203 /54407 Saw blade length: 300 x 32 x 2.0 mm Stroke cut pressure: hydr. selectable via adjustable wheel Cutting range at 90 Round: 150 mm Cutting area max. 150 x170 mm Cutting speed: approx. 12-24 m /min Cutting range at 90 flat: 170 x 150 mm Miter cut: adjustable up to 45 Cutting range at 45 Round: 100 mm Cutting area at 45 Flat: 100 mm Cutting range at 60 round: Cutting area at 60 flat: Vice clamping: 155 mm Working height: 700 mm Power transmission: stable gear ratio Saw motor: Bauknecht 380 Volt 50 Hz 0.55/0.75 KW 1390/2780 rpm Total power requirement: 1, KW Weight: approx. 170 kg Location: Rotthalmünster Germany Delivery time: immediately possible Freight base: from stock free loading truck Addition solid design stable ironing guide (adjusta ...

control panel for Avantra25 - all details can be seen on the picture. The panel is tested and comes from a functional Avantra25. Available on stock

cassette for Avantra25 - all the details can be seen on the picture. The cassette is tested and comes from a functional Avantra25. Available on stock

input cartridge for Avantra25 - all details can be seen on the picture. The cassette is tested and comes from a functional Avantra25. Available on stock

Storage tank, storage tank, diesel tank, fuel oil tank, steel tank, yard filling station, service filling station - brand new - according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole with dome lid and is connected to the following Fittings equipped: 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. The container is primed on the outside - on untreated sheets. L = approx. 3.80 m - D = 1.60 m - weight approx. 1.6 to. - ex works, freely charged - General: You will receive an invoice with VAT shown. The purchas ...

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Diesel tank 10,000 litres double-walled used, with a new diesel pump Vision 60 The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder 1 Diesel pump Vision 60 (new) . Flow rate approx. 50 LTR/min . Hose length 4mtr can be extended. Container dimensions Length 5,310 mm Diameter 1,600 mm Weight approx. 1,500 kg Of course, you can also use your tank system. We are happy to offer you diesel pumps with a hig ...

drive motor for Avantra25 - all details can be seen on the picture. The engine is tested and comes from a functional Avantra25. Available on stock

Complete laser and focus module for Avantra25 - all details can be seen on the picture. The unit is tested and comes from a functional Avantra25. Available on stock

Complete ventilation unit for Avantra25 - all details can be seen on the picture. The unit is tested and comes from a functional Avantra25. Available on stock

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Storage tank / extinguishing water tank 100,000 liters used. The container is used and cleaned from the inside. Length: approx. 15700 mm Diameter: approx. 2900 mm Weight: approx. 16000 kg The container can be fitted with the appropriate fittings for extinguishing water can be equipped according to DIN . Of course, you can also use your tank system. All our tank systems are used in our company by selected employees extensively checked and checked. An inexpensive delivery can be offered with . In addition, we purchase existing tank systems and can professionally as an approved specialist company , clean and transpot. We would be happy to make you an offer . We offer the tank system free of charge from the Warstein ...

engine for Avantra25 - all the details can be seen on the picture. The engine is tested and comes from a functional Avantra25. Available on stock

engine for Avantra25 - all the details can be seen on the picture. The engine is tested and comes from a functional Avantra25. Available on stock

input cartridge for SelectSet 5000 - all details can be seen on the picture. The cassette is tested and comes from a workingSelectSet. Available on stock

MATEC forklift blades are robust and easy to build and can be attached to almost any commercial lyklift. With a fuse bolt, the tilting device can be blocked for special inserts. The front shutter flap can be mounted on any shovel. The interchangeable scraper is suitable for planing work such as removing ice, repelling soil, gravel or feed, etc. - Bucket width 1950 mm - Bucket depth type 1: 1000 mm, shovel depth type 2: 1330 mm - Bucket height without attachment 450 mm - Weight approx. 220 kg - Payload 2000 kg - Steel sheet 4 mm industrial lypainted - Fork shoes axle distance 800 mm - Fork tine width max. 170 mm - Fork thickness max. 60 mm - 4 lifting eyelets for krange slopes - Tilting device for cable pull with lifter and spring reset, securing bolt Options at extra cost: - Type 2 shovel depth 1330 mm Total price € 1590.00 - Front shutter € 590.00 - hydr. Liftin ...

AGFA Laser for SelectSet 5000. The laser is tested and works - can be seen on the picture. We are happy to send you the high-resolution original image, here the laser beam can be seen more clearly. Available now

We can offer: Bundeling machine for packs of bags. Producer : Algewa/Switzerland Type: 965 AS Still in operation: No Available: Now

Type: HM 200, high-performance mixer, partly in VA, Y:00, 1987, 6.5 / 9.5kW, 2 knife heads, control cabinet, completely on base frame, drives can be polum-switched.

The machine is equipped with controlled B-axis smallest delivery 0.001, swivel range 340, controlled workpiece spindle stick (C-axis)smallest delivery 0.05, max. 42 rpm, equipped with an external grinding spindle (left and right spindle end), 1 internal grinding spindle. For an additional charge, a second internal grinding spindle can be delivered. Z-way 680 mm, X-way 255 mm, smallest delivery of the axles 0.001 mm. Tip height 175 mm, W.-stock MK 5, step. adjustable 1 - 1200 rpm, external grinding spindle 1000 - 3000 rpm, max. grinding wheel perm. 300 mm. The machine is suitable for ideal for the processing of carbide and technical ceramics (SIC and Al 2). Intermediate sale:reservations Delivery time:4-6 months

4-color R23240/17 SHIKI label press Model: PC 45 M Built: 1992 Web width: 280 mm Availability: instantly 3 - coloured or 4 - coloured (optional) Printing width: 270 mm, min. 50 mm max. feed: 7, approx. 180 mm Accessories: Rolling unit for rollers up to 100 cm in diameter Winding unit for small rolls pneumatic remaline hole on both sides Speed: 7000 cycles/h max. Products: Hole edge adhesive labels, adhesive labels, hole edge cardboard labels, tickets with and without printing - can punch, print, embosse, number, perforate, punch Available: immediately

We can offer the following paper bag machine for Block bottom / SOS bags: Block bottom / SOS bag machines Producer : Windmoeller & Hoelscher Type : Triumph 3 Year app. 1968 Bag width 120 - 260 mm. Tube length 240 - 900 mm. Bottom width 70 - 150 mm. Max. web width 860 mm. Max. mechanical speed 200 m/min. W&H QMS 992 - 4 colour tail end printer 2 unwinds and glue units for 2 ply bags Still in operation: No Available: Now

Roller die line consisting of:- 1 x Troester 200mm pin barrel extruder Type QSM200K-16D power roller feed, 10 rows of 8 pins, L/D ratio 16:1 Serial no. 1816/88, year 1988, With temperature regulation unit, 282kW ASEA DC variable speed motor mounted on rails (moves away from calender to clean out etc) Hydraulic sheeting head linked directly to:- 1 x Adamson 24in dia x 68in wide two roll calender, peripherally drilled rolls cross axis, bush type bearings, motorised nip adjustment with unidrive gearbox 277kW ASEA DC variable speed motor Hydraulic clamping device for extruder Set of 4 x cooling drums Dual wind up and liner applicator Chalking Unit Siemens PLC control. Complete line in excellent condition. PRICE: On request.

Format: 700 x 1020 mm R26060/18 SAKURAI screen printing machine Model: SCA 102 Built: 1989 max. print size: 700 x 1020 mm Availability: instantly automatic screen printing line high speed cylinder Special version: min: 500 x 350 mm Sheet transfer station can be folded on one side optical front edge control mechanical double-arch control via friction rollers pneumatic squeegee pressure control and sieve clamping PERFECTION high-performance dryer 1120/4: Inlet width 1100mm, 2 warm and 2 cooling zones with UV dryer MIRUS forklift model SV Etc. Available: immediately

We can offer: Windmoeller & Hoelscher Type : Triumph 2 Year: 1974 Bag width 70 - 190 mm. Tube length 180 - 470 mm. Bottom width 40 - 110 mm. Max. mechanical speed 250 m/min. 2 unwinds and glue units for 2 ply bags With : Photocell for pre-printed reels With: Bottom patch unit Still in operation: Yes Available: Now

Technical data: Clamping opening max.: 850 mm (950 mm) Clamping claw opening max.: 620 mm Output of the main voltage: hydraulic Cutting length: 6000 mm Number of clamping planks: 4 stubble - Incl. new running rails - stiffened in profl steel construction with cross-beams - Single buck adjustment - Cutting staer adjustment, multi-chain drive and ball-bearing connection shaft by electr. Positioning drive. - Automatic lubrication for saemt rails and Guides. - Low wear and high adjustment speed due to central hydraulic clamping claw adjustment with automatic Clamping pressure reduction in case of retracted clamping claws - Trunk can be in the tense state in the Laengaxis to be aligned - Cutting of conical timber or cutting parallel to the Tree edge possible - 3 pairs of regular turners "Quick Turner" - Wheel mount directly connected to clamping buck bottom, thus  ...

We can offer the following Block bottom / SOS bag machine for sale: Producer : Windmoeller & Hoelscher Type : Triumph 2 Bag width 70 - 190 mm. Tube length 180 - 470 mm. Bottom width 40 - 110 mm. With : Photocell for pre-printed reels Year approx. 1973 Overhauled by Garant Excellent condition Still in operation: Yes Available: Now

Sub-track labelers and upper-track labelers for deep-drawing machines different machine widths, Please make a request . In stock always used labelers available ! Pictures can be sent on request !

Offer about 40 TRANSPORT Grain wagons TYPE Uagps Pictures can be sent immediately. TECHNICAL DATA Gauge 1435 mm Loading gauge UIC Length between buffers 14840 mm Length of the body 13600 mm Height of the wagon from the rail 4053 mm Wheel base of the wagon 9800 mm Tare of wagon 23.3 t Y25 Bogie type - Y25 Bogie wheel base 1800 m Maximum load 56.7 t Load capacity 80 m3 Brake type - KE-2c-AL-SL Maximum speed 100 km/h Number of discharging gates 3 Aperture of discharging gates 800x770 mm Aperture of loading gates 508x10088 mm All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are ap ...