136,709 used machines on RESALE, but how to find them? Machine Search
1 x Polar Autocut 25 XT automatic cutter 1 x Polar DC-System die-cutter 1 x Polar BD single station bander
work piece width: 1.200 mm workpiece height: 500 mm bore diameter: 8 - 40 mm Number of drilling agregates: 3 Stk. spindle speed:: 150 - 1.100 U / min tool changer: 15 Stk saw blade diameter: 1.430 mm cutting speed: 8 - 30 m/min total power requirement: 43 kW weight of the machine ca.: 20 t dimensions of the machine ca.: m Working Capacity Angle sections: 80 × 65 × 10 mm to 250 × 250 × 28 mm Channel sections: 80 × 45 mm to 400 × 110 mm I-beams: 80 × 46 mm to 600 × 220 mm Wide flange beams (HE): 100 × 100 mm to 1,008 × 302 mm Special wide flange and welded T-beams: up to 1,200 × 500 mm Workpiece Data Max. workpiece width: 1,200 mm Max. workpiece height: 500 mm Drilling Unit Number of drilling spindles: 3 (1 vertical, 2 horizontal) Drilling diameter: 8 – 40 mm Spindle speed: 150 – 1,100 rpm Drilling feed: 0 – 500 mm/min Rapid approach: 3,850 mm/min Rapid return: 8,000 mm/mi ...
TECHNICAL DATA: Machinable dimensions: min. 600 x 600 mm – max. unlimited Machinable height: min. 500 mm – max. 2300 mm Wrapping with stretch film Voltage: 220 V
Used autoclave made by the German company VWR model Vapour Line80-B. New: 2016. Technical specifications: - Chamber capacity: 90 L - Operating temperature: 138 °C - Pressure: 2.8 bar - Chamber diameter: 410 mm - Motor power: 3 kW - Length × width × height: 740.0 × 915.0 × 606.0 - Weight: 165 kg In very good condition with full documentation, all valid UDT inspections, equipped with 2 baskets, an external condensate container and gloves. Does not require direct access to the mains water supply. Medium: demineralised water.
used
A Weber slicer sickle knife grinding machine is available. Control levels: 3, version: CNS, max. blade length: 650mm, grinding angles: 22°/26°/28°/32°, grinding wheel dimensions X/Y/Z: 100mm/40mm/50mm, dressing wheel dimensions X/Y/Z: 50mm/25mm/20mm, blade cutting edge to rotor center distance: 400mm, machine dimensions X/Y/Z: approx. 1100mm/550mm/1800mm, weight: approx. 300kg. Documentation available. An on-site inspection is possible.
Excellent production ready condition, no damages, config 4 plus 4 and delivery. Available immediately.
CONTROLS Point-to-point control (NC) SIEMENS S7 TECHNICAL SPECIFICATION max. diameter of saw blade: 460 mm cutting capacity round: 146 mm cutting capacity square: 138 mm mitre cutting: no .. oblong: 250 mm .. .. x: 100 mm .. to: 220 mm/min DIMENSIONS / WEIGHTS space requirements -left/right-: 2200 mm space requirements -front/back-: 1950 mm total height: 2000 mm total weight approx.: 2700 kg High-performance automatic saw for cutting aluminium and non-ferrous metal profiles to length in 90° cuts. With feed conveyor and discharge / vibrating section and extraction system. - max. profile width / height to be processed: 250 / 148 mm - Min. profile width / height to be processed: 10 / 20 mm - Cut-off lengths from 10 mm - Saw blade motor 12/18.5 KW, S6 60%
cutting diameter: 235 mm dimensions of saw-band: 2645 x 27 x 0,9 mm cutting width: 280 x 190 mm cutting speed: 0 - 90 m/min : 120 mm : 120 mm : 190 mm Impact energy: 170 mm connected load frequency: 230 Volt total power requirement: 1,5 kW weight of the machine ca.: 290 Kg dimensions: 1,2 x 0,8 x 1,2 m Double-miter band saw - Variable speed control - Miter cuts up to 60° left and 45° right - Vise with quick-clamping mechanism - Blade tension monitoring - Automatic electric cooling system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Description Device Type: Automatic Filter Integrity Tester Item number: CS 001 Serial Number: 17076418 Supply voltage 12–24 V DC Country of manufacture: Germany Product Description The Palltronic® Compact Star is a fully automatic, portable integrity test device for membrane filters. The device enables fast, reliable and non-destructive verification of filter integrity by means of pressure maintenance methods. By automatically performing and evaluating the tests, it supports quality assurance in the food, beverage and process industries.
Labeler Manufacturer: Weber Alpha Compact Type 150-30-LH Suitable for self-adhesive labels Label width min. 10 mm – max. 150 mm Label length min. 20 mm – max. 300 mm Label roll outside diameter 300 mm Sleeve core diameter 76 mm Including tripod can be moved
Manufacturer PINACHO Model RHINO SK – 425 Year 2005 CNC GE Fanuc Series 21i-T Capabilities and advances Distance between points 5,000 mm. Stitch height 425 mm. Support Guides 2 Maximum allowable turning on a bed 850 mm. Maximum turning on transverse carriage 560 mm. Bed width 425 mm. Fast Forward X/Z Axes 10,000 mm/min Work progress X/Z axes 7,000 mm/min Head Head shaft pitch 85 mm. Nose head DIN 55027-nº8 Main Spindle Morse Taper 5 Head speed 0-2,000 rpm Automatic head ranges 2 Main Motor Power 11 kW Turret Automatic Turret Type Turret Positions 8 Counterpoint Hydraulic tailstock rod outlet INCLUDED Ø of the tailstock shaft 96 mm. Tailstock shank travel 215 mm MORSE 6 tailstock cone Equipment Self-centering 3-jaw hydraulic chuck, diameter 300 mm INCLUDED 4-support bezel Ø450 mm. INCLUDED 3-support bezel Ø250 mm. INCLUDED Plate Protection INCLUD ...
Condition: overhauled, fully functional Operating mode: fully automatic or manual Operation/display via touch LCD panel Belt Feeding/Insertion: Automatic Welding system: Strap closure by means of heat welding wedge Consumables: currently powered by 5 mm polypropylene tape/cord. Max. power: approx. 36 p/min Option: Equipped with parcel stoppers, with parcel press and side pushers Transport speed table belts: Infinitely adjustable Technical documentation: completely available / operating instructions, spare parts catalogue and electrical diagram
Fully automatic strapping machine DSI DBA 200 Made in Germany. The DBA-200 Automatic Frame Strapping Machine is designed to be very durable due to its robust design, the simple operation and handling, its performance and its sophisticated technology particularly suitable for industrial use. Siemens S7-200 controller. Infinitely adjustable strap tension. Built-in tape storage. Energy-saving design, the motor only runs during strapping operations. Reel holder for quick tape change. Robust construction. Initiators instead of microswitches. Automatic tape threading. With foot switch. Belt width from 9 to 12 mm. Belt tension 5.0 to 80.0 kg. Strapping speed up to 26 straps per minute. Frame size 850 x 600 mm. Product size min. 100 mm (w) x 30 mm (h), max. 850 mm (w) x 600 mm (h). Connection voltage 230 V, 1 phase, 50 Hz. Machine dimensions 1,412 x 600 x 1,545 mm. De ...
Semi-automatic strapping machine for PP strapping ROBOPAC SR 1000 Clamping head with electromechanically controlled feed and return unit. Welding unit with electronically controllable temperature control by potentiometers. Strap tension adjustable from 15 to 40 kg by handwheel. Reel seat adjustable to 3 different core diameters 200-230-280 mm. Removable stainless steel work surface with safety switch. Working height 750 mm. Mobile. Castors with parking brake. Power supply 220 V. PP tape outer diameter up to 480 mm. Width 6/8/12/15.5 mm. Machine dimensions: height x width x depth: 750 x 930 x 580 mm. Internal NR 662 Strapping Machine ROBOPAC SR 1000 Carton Sealing Machine Packing Machine
6 Stutznäcker single-needle lockstitch sewing automats are offered. Outside frame size X/Y: 1900mm/2600mm, max. stitch rate: 2600stitches/min, sewing type: lockstitch, sewing head/gantry: Mammut Class 750, linear unit X-axis: Hauser HLE 150 (installation position right), Y-axis traverse: ball screws/linear guide rails, control system: Hauser Comtac 2000. Equipment: Electronically synchronized separate drive for needle and hook, pneumatic presser foot lift, upper thread monitor, frame coding for safety monitoring, coated table plates as frame supports within the travel area, various frames, spare hooks, electrical cabinet on the right, operator panel on the right-hand side table and left-hand side table with pneumatically lowerable table top (max. 200mm) and surrounding support for the frame. Four sewing automats were retrofitted in 2007, two sewing automats in 2006. Dimensions X/Y: appr ...
ADIGE TT640 circular sawing machine was built in 2009 in Italy by ADIGE S.p.A. The machine enables precise, automatic cutting of a wide range of metal workpieces, such as bars, tubes and profiles. Solid, square and rectangular sections are machined by means of a cutting disc with a maximum diameter of 275 mm. It ensures high repeatability and cutting precision in both unit and series production. The ADIGE TT640 is equipped with a feeder that facilitates the loading of material into the workspace and enables continuous machine operation. The intuitive SIEMENS SIMATIC PANEL HMI control panel enables precise programming and control of process parameters, ensuring user-friendly operation. All this is complemented by an extremely rigid design that maintains high operational stability even during the most intensive use. The ADIGE TT 640 automatic circular sawing machine weighs 1350 kg. T ...
Automatic container orienter made of stainless steel by CDA France, XL model. The equipment has a hopper with an automatic elevator for the reception of the containers, orients them through the internal positioning system and delivers them correctly aligned on a conveyor for automatic feeding to the production line. Configured for 10 ml PET containers, although it can be adapted to other formats using change kits supplied by the manufacturer. Technical characteristics Redresseur model by flacons XL Year of manufacture 2023 Motor 1.5 kW 220 V 50 Hz In your state
bar material dia.: 32/38 mm spindle passage: 44 mm turning length: 320 mm turning speeds: 200-8000 U/min c-axis: 0,001 Grad gripping station: 32/38 mm turning length: 120 mm turning speeds: 200-8000 U/min c-axis: 0,001 0 number of tools: 13 fix number of milling stations: 4+5 driven control: Mitsubishi Meldas M70 Number of axles: 5+2 St. total power requirement: 7,5 kW weight of the machine ca.: 2850 kg dimensions of the machine ca.: 2,5 x 1,4 x 1,75 + FMB m bar loader: FMB turbo 3-36 fire distinguisher: Kraft & Bauer CNC sliding headstock machine Citizen L32-1M8, built 01/2019 with barloader FMB turbo 3-36 equipped with swarf & coolant tank, fire distiguisher. ON/OFF 29.564h (status 24.03.2026) Running hours 26.607h (status 24.03.2026) GBL function (standard) LFV function: no The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 220 mm capacity 90 degrees: square: 220 x 220 mm turning speed range:: 20 - 140 m/min saw band length: 3720 x 34 x 1.1 mm height of material-table: 825 mm coolant capacity: 80.0 l total power requirement: 2.5 / 3.5 kW weight of the machine ca.: 1500 kg range L-W-H: 2350 x 2050 x 1500 mm - in checked conditions - machinevideo - https://www.youtube.com/watch?v=joc0EbemYC8 Equipment: - electro-hydraulic band saw - FULLY AUTOMATIC - for sawing hollow profiles and solid materials made of steel, stainless steel, . tool steel, non-ferrous metals and plastic - control panel on the front right including button for manual operation (setup/individual cut) - electro-hydraulic material clamping - stepless cutting speed .. 20-140 m/min. - electro-motor chip conveyor - manual adjustment of the material feed range via handwheel including analogue value display - automatic height adju ...
max. bore diameter to be ground: 6 bis 100 mm stroke - stepless adjustable: 550 mm grinding depth: ca. 250 mm workpiece weight: 150 kg total power requirement: 15 kW weight of the machine ca.: 4.300 kg dimensions of the machine ca.: 2,7 x2,4 x 2,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
autom. Cardboard strappers, Mosca, SoniXs-TR6 Pro – used - : Price from location: only 9.500.-€ (net) from location! Manufacturer: Mosca Type: SoniXs-TR6 Pro Year of Make: 2017 Machine number:112921 1L+N+PE, 50-60Hz, 100-240V, 3.00 - 1.25 A, max. 16 A Condition: good, Available: from approx. End of October 2026 Location: Erfurt area
autom. Cardboard strappers, Mosca,– used - : Price: only 4.950.-€ (net) ex location! Manufacturer: Mosca Type: Sonixs TR CE Year of Make: 2013 Machine number: 106880 2L+PE, 50-60Hz, 400V, 2.5A, 16A, Condition: good, Available: immediately Location: Erfurt area
mreifer, Mosca, SoniXs-TR6 Pro – used - : Price from location: only 17.500.-€ (net) from location! Manufacturer: Mosca Type: SoniXs-TR6 Pro Year of Make: 2020 Machine number:119645 With two rollers – device switches automatically when one roll is empty Device currently works with 12mm wide strapping Description: pp-120-055-bl/-1-g-200-2500 Material: Polypropylene (PP) / Belt width: 12.0 mm / Belt thickness: 0.55 mm / Breaking load: 120 kg / Core diameter: 200 mm / Running time/length: 2500 m Former new price: 36.461.-€ 1L+N+PE, 50-60Hz, 100-240V, 3.00 - 1.25 A, max. 16 A Price incl. started pallet with the strapping (see photo) and a small spare parts package! Condition: good, was not used much Available: immediately Location: Duderstadt
cutting diameter: 280 mm saw band length: 4200 mm cutting width: 280 x 280 mm dimensions of saw-band: 4200 x 34 x 1,1 mm cutting speed: 18 - 115 m/min multiple feeding: 0 - 6000 mm power capacity: 3,0 kW coolant: voltage: 400 V total power requirement: 5,0 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,35 x 2,40 x 2,00 m - serial-no.: 6082 - control: SIEMENS COROS - OP 15 - chip conveyor - multiple feeding - coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore diameter: 65 mm throat: 380 mm Control: PLC-Steuerung bore spindle turning speed range: 63 - 1600 U/min table-size: 630 x 500 mm rapid traverse Z-axis: 4,75 m/min boring feeds:: 0,05 - 0,56 mm/U total power requirement: 9 kW weight of the machine ca.: 2,0 t dimensions of the machine ca.: 1,50 x 1,20 x 2,95 m Drilling capacity in steel ST60: 65 mm Drilling capacity in cast iron GG20: 80 mm Thread cutting ST60: M68 Thread cutting GG M72 SPS-controlled automatic drilling machine with Drilling/deep hole drilling/thread cutting Sequence: 1st rapid traverse to start position 2. switch on the speed 3. switch on the drilling feed 4. drilling until the drilling depth is reached 5. return in rapid traverse to start position Manual operation possible (speed and direction of rotation, rapid traverse positioning, Switching the drill feed on/off) Selection of the drill feeds and spindle speed man ...
used
x-travel: 630 mm y-travel: 560 mm z-travel: 560 mm spindle turning speed range: 12000 U/min milling-head swivable +/-: control: Heidenhain type: Mill Plus table surface area: 1000x600 mm : elktr. coolant: chip conveyor: kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Spinel hours 2070 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Te ...
spindle passage: 25 mm turning speeds: 5750 U/min Rest: 4 straight turning atchm. - working travel: . mm turret head: 8 thread cutting attachment: bar loader: LNZ Hydrobar type: 6.32HS-4.4 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m No.: ER25071388 Parts catcher The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this a ...
spindle passage: 25 mm turning speeds: 5750 U/min Rest: 4 straight turning atchm. - working travel: . mm turret head: 8 thread cutting attachment: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m No.: ER25071388 Parts catcher The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software ...
spindle passage: 25 mm turning speeds: 5750 U/min Rest: 4 straight turning atchm. - working travel: . mm turret head: 8 thread cutting attachment: bar loader: LNZ Hydrobar total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Parts catcher The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the ...
spindle passage: 25 mm turning speeds: 5750 U/min Rest: 4 turret head: 8 thread cutting attachment: bar loader: LNZ Hydrobar type: 6.26HS-4.4 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Parts catcher The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech ...
spindle passage: 25 mm turning speeds: 5750 U/min Rest: 4 turret head: 8 thread cutting attachment: bar loader: LNZ Hydrobar type: 6.30HS-4.4 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Parts catcher The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech ...
spindle passage: 60 mm cross-slide: 4 turret head: 6 Pos. thread cutting attachment: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
machine: 15 Pos. accessories:: Pos. electric measuring devices: 1 For sale is an entire production line for mass and small parts. This includes: 1x INDEX GS30 with SAMECA bar loader 8x INDEX ER25 with LNS Hydrobar bar loader 2x INDEX B60 2x BOLEY 2x INDEX ER25 1x Index 18 Ulmer tool presetter Complete magazine with accessories, spare parts, and tools, some in like-new condition The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We lo ...
cutting diameter: 330 mm saw band length: 4115 mm cutting width: 0,9 mm main drive motor: 3,7 kW Roller conveyor length: 5000 mm Roller conveyor width: 700 mm roll diameter - bore: 150 mm total power requirement: 13 KVA weight of the machine ca.: 1,8 t dimensions of the machine ca.: m Bandsaw filling machine The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this a ...
spindle passage: 60 mm cross-slide: 4 turret head: 6 Pos. thread cutting attachment: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle passage: 25 mm turning speeds: 5750 U/min Rest: 4 turret head: 8 thread cutting attachment: bar loader: LNZ Hydrobar total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m parts catcher The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle passage: 25 mm turning speeds: 5750 U/min Rest: 4 turret head: 8 thread cutting attachment: bar loader: LNZ Hydrobar total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m parts catcher The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle passage: 25 mm turning speeds: 5750 U/min Rest: 4 straight turning atchm. - working travel: . mm turret head: 8 thread cutting attachment: bar loader: LNZ Hydrobar total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m parts catcher The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the ...
cutting diameter: 330 mm saw band length: 4115 mm cutting width: 0,9 mm main drive motor: 3,7 kW Roller conveyor length: 5000 mm Roller conveyor width: 700 mm roll diameter - bore: 150 mm total power requirement: 13 KVA weight of the machine ca.: 1,8 t dimensions of the machine ca.: m Bandsaw filling machine The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this a ...
cutting diameter: 400 mm saw band length: 4715 mm cutting width: 1,3 mm main drive motor: 7,5 kW Roller conveyor length: 4000 mm Roller conveyor width: 700 mm roll diameter - bore: 150 mm total power requirement: 14 KVA weight of the machine ca.: 7,5 t dimensions of the machine ca.: m Bandsaw filling machine The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this a ...
cutting diameter: 400 mm saw band length: 4715 mm cutting width: 1,3 mm main drive motor: 7,5 kW Roller conveyor length: 4000 mm Roller conveyor width: 700 mm roll diameter - bore: 150 mm total power requirement: 14 KVA weight of the machine ca.: 7,5 t dimensions of the machine ca.: m Bandsaw filling machine The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this a ...
cutting diameter: 1300 mm saw band length: 11880 mm cutting width: 1,6 mm main drive motor: 11 kW table surface area: 2500x1300 mm cutting range: 1300x1300 mm total power requirement: 16 KVA weight of the machine ca.: 17,75 t dimensions of the machine ca.: m Bandsaw filling machine The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS ...
cutting diameter: 1300 mm saw band length: 11880 mm cutting width: 1,6 mm main drive motor: 11 kW table surface area: 2300x1200 mm cutting range: 1300x1300 mm total power requirement: 16 KVA weight of the machine ca.: 17,75 t dimensions of the machine ca.: m Bandsaw filling machine The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS ...
cutting diameter: 1000 mm saw band length: . mm cutting width: . mm main drive motor: . kW cutting range: 1000x1000 mm total power requirement: . KVA weight of the machine ca.: . t dimensions of the machine ca.: m Bandsaw filling machine The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 1000 mm saw band length: . mm cutting width: . mm main drive motor: . kW cutting range: 1000x1000 mm total power requirement: . KVA weight of the machine ca.: . t dimensions of the machine ca.: m Bandsaw filling machine The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 80 mm turning length: . mm control: Siemens C 200 tool change unit: 14 live tooling: swing diameter: 130 mm spindle passage: 42 mm turret head: 2 total power requirement: kW weight of the machine ca.: t Synchronous spindle on turret Turret 1: 12 tool positions Turret 2: 8 tool positions 3 tool positions for synchronous spindle Collet set Many tool holders Various driven tools Bar loader Index MBL Chip conveyor with coolant unit Set of spindle reducers and much more (see images) The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, o ...
turning diameter: 300 mm turning length: 360 mm control: Siemens S3 T swing diameter: 370 mm tail stock: Tool changer: 14 Pos total power requirement: kW weight of the machine ca.: t 14-station tool turret, Many accessories Bar loader The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 300 mm turning length: 360 mm control: Siemens S3 T swing diameter: 370 mm Tool changer: 14 Pos live tooling: turning speeds: 25-4000 U/min transmission ratio: 2 total power requirement: kW weight of the machine ca.: t Quill Turret with 14 tool positions Driven tools Documentation Almost complete collet set 2-jaw chuck 3-jaw chuck Multiple jaws, both hard and soft + various claw jaws Multiple tool holders Various driven tool holders Hydraulic bar feed Hydro Sameca Feed tubes for all diameters Chip conveyor Coolant unit Set of spindle reducers The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your worksh ...
cutting diameter: 530 mm saw band length: 6670 mm cutting width: 530 mm Control: CNC main drive motor: 7,5 kW roll guideway: optional total power requirement: 13 kW weight of the machine ca.: 6,3 t dimensions of the machine ca.: m Bandsaw filling machine The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of ...
11042026 Rotary Labelling Machine P.E. Labellers MASTER 1120-20T (2012) This labelling station is fully automatic 4-Station Self-Adhesive Rotary Labeller for Glass and PET Bottles. The P.E. Labellers MASTER 1120-20T is a fully automatic rotary modular labelling machine manufactured in 2012, built on their MASTER / Modula SL planform. and it has labelling capacity 27000 bph. Bottle plates are rotated with servo motors. It is configured with a 1120 mm central rotary carousel, 20 bottle plates, and 4 installed self-adhesive, pressure-sensitive labelling stations, making it suitable for the application of front, back, neck and additional decorative or promotional labels in a single pass, depending on bottle format and tooling. The machine is especially suitable for bottling lines requiring flexible multi-label application, accurate label placement and fast changeovers between bottle ...
maximum number of results exceeded
please refine your search
