cam auto used for sale

This TGT Robby 900 XL was manufactured in 2019. It features a Palfinger crane 1500, a forklift lift of 1.8 m, and a Honda engine. The machine is installed on a crawler chassis with a telescopic width and offers a working height of approximately 6.5 m. It has a crane load capacity of up to 900 kg and a fork load capacity of 2000 kg. Contact us for more information about this machine.

Technical data: Cutting range: 90° round: 260 mm 90° flat: 300 x 260 mm 90° square: 260 x 260 mm +45° round: 200 mm +45° flat: 200 x 240 mm +45° square: 200 x 200 mm +60° round: 165 mm +60° flat: 160 x 120 mm +60° square: 150 x 150 mm -45° round: 200 mm -45° flat: 200 x 240 mm -45° square: 200 x 200 mm Shortest offcut length: 35 mm Total connected load: 2.0 kW Saw motor, power frequency controlled: 1.5 kW Cutting speed infinitely variable at frequency controlled: 20 - 110 m/min Saw blade dimensions: 2910 x 27 x 0.9 mm Dimensions and weight: Length, approx.: 1020 mm Width, approx.: 1830 mm Height, upper part lowered, approx.: 1460 mm Height, top in maximum position: 1900 mm Material support height: 950 mm Total weight, approx.: 510 kg Equipment: - Stepless cutting speed - Saw blade guides made of carbide, replaceable - Hydraulic cutting feed -  ...

This MIRECS EasyLift was manufactured in 2024. It features a stable base plate for secure anchoring, a Demag Chain Hoist DCBS with a balancer for precise load handling, and a load capacity of 150 KG. The vertical stroke reaches up to 1,500 mm with a total height of 3,000 mm. Ideal for stationary applications requiring robust and precise lifting solutions. Contact us for more information about this machine.

FULLY-AUTOMATIC can be used in SEMI- AUTOMATIC mode with small different batches on and off when needed No operator (you save 1 man per shift) Low maintenance costs (no discs, just knives which can be re-sharpened) No need to reduce size, on most scraps. Suitable for film + foam + fibers, moisture and some contamination are well tolerated. Best degassing in the process, compared with other systems. Remote assistance through modem Agglomerator with barrel diam. 1500 mm.,LxWxH 4,3 x 2,3 x 5,050 mt. 570 kw , installed power abput 370 kw in work Steel cylinder case with inspection door, Side opening panel for inspection and replacing blades Power switchboard, Exchangeable inner steel liner for barrel Oleo-dynamic power station 0,75 kw with electro-valve opening, Hub temperature control system, Grease lubricated drive bearings, 0,4 kw ventilator for belt cooling with air conveyor, Steam vacuu ...

I am selling an autoclave Korimat KA 380 Programmable control with the ability to record temperatures 1 basket for inserting products Machine in original condition, fully functional. Possibility of transportation and installation of the device by an external service company. Price negotiable.

LBBC Boilerclave Internal dims: 900mm diam. x 1100mm long Max. working pressure 8.6bar Design Temperature 200deg.C Jacket input power 75KW

Schütte SF51 6-spindle bar machine Suitable for complex turning operations in metalworking The Schütte SF 51 is a proven, cam-controlled 6-spindle bar machine with 51 mm spindle passage, ideal for the efficient series production of turned parts. These robust machines feature an electronic cam switch that provides high process stability and flexibility in turning, drilling, and tapping. The machine is appreciated for its stability and flexibility in the production of demanding workpieces Manufacturer: Schütte Type: SF 51 Cam-controlled multi-spindle bar machine Number of spindles: 6 main spindles Control: Conventional Spindle passage: 51 mm Feed max. 125 mm Turning length max. 102 mm Drilling depth max. 102 mm Tapping device Chip conveyor 6-fold loading magazine Voltage: 400 V Year of Make: 1979 Dismantling and removal by buyers Dismantling also possibl ...

Schütte SF51 6-spindle bar machine Suitable for complex turning operations in metalworking The Schütte SF 51 is a proven, cam-controlled 6-spindle bar machine with 51 mm spindle passage, ideal for the efficient series production of turned parts. These robust machines feature an electronic cam switch that provides high process stability and flexibility in turning, drilling, and tapping. The machine is appreciated for its stability and flexibility in the production of demanding workpieces Manufacturer: Schütte Type: SF 51 Cam-controlled multi-spindle bar machine Number of spindles: 6 main spindles Control: Conventional Spindle passage: 51 mm Feed max. 125 mm Turning length max. 102 mm Drilling depth max. 102 mm Tapping device Chip conveyor 6-fold loading magazine Voltage: 400 V Year of Make: 2004 Dismantling and removal by buyers Dismantling also possibl ...

CNC Saw Brand: SOITAAB (FRIGGI) Model: SF300 CN Type: Automatic Structure: Double column cylinders Round cutting capacity: up to 300mm Saw blade speed variation Ethernet interface (Industry 4.0)

An autoclave Stock DFT including a Jumag steam system for the food industry is available. Batch trolley capacity: 2, process method: steam-water spraying, application: sterilization/pasteurization, gross volume: approx. 1550l, steam system: Jumag DG560, steam output: approx. 560kg/h. Including 6 batch trolleys. Documentation available. An on-site inspection is possible.

Robot cell including safety enclosure and light curtain 6-axis robot HYUNDAI HH020 Transfer weight/free payload 13 kg Matrix version, material supply using matrices We currently have 2x SherpaLoader 20 in stock, e.g. built in 2018, approx. 7,500 operating hours (of which >70% is waiting time in front of the machine for the next loading request). Component dimensions Ø10 – 200 mm, length 10 – 200 mm; effective payload up to 13 kg, raw parts are supplied to this system via grid matrices. Before sale, the system will be serviced with - Software update for master control and HMI - Gear grease change on axes 1 - 6 - Encoder battery replacement on axes 1–6 and mainboard - Replacement of all energy chain cables on axes 3–6 Find more here - .ucymachines/ Contact us at - sales@ucymachines

MANURHIN KMX 326 C sliding head lathe was built in 2008 in France by MANURHIN KMX. The machine, distinguished by its high efficiency, was specially designed for precision machining of workpieces with even the most complex geometries. All machining processes, i.e. precision drilling, threading and turning are performed by means of a reliable spindle and tools taken from two capacious turrets. The MANURHIN KMX 326C CNC automatic lathe is offered with equipment, consisting of, among others, a CNC controller, bar feeder and tooling. The total weight of the machine is 2600 kg. Technical specifications of the MANURHIN KMX 326 C CNC lathe - CNC controller: GE FANUC Series 18i-TB - number of axes: 5 (X1, X2, Y, Z, C) - spindle rotational speed: 50-7200 rpm - spindle bore: 26 mm - spindle stroke: 160 mm - 6-position turret (2 pcs.) - bar feeder: FMB turbo 3-36 - toolholders - collets  ...

Key data: 430 mm

Fully automatic band saw machine Manufacturer : Kasto Type: Twin A4 Bauahr: 2010 Condition: gebraucht / used Location : Warehouse Sweden Technical data Cutting range: Cutting range around 430 mm Cutting area square H x W 430 x 430 mm Cutting area flat H x W 430 x 430 mm Clamping range 0 – 430 mm Smallest dimension to be sawn: 10 x 10 mm Smallest section length 6 mm Shortest residual piece length in automatic mode (only possible for geometrically flawless surfaces) 35 mm Shortest offcut length in single cut 10 mm Dimensions and weights: Length approx. 2,140 mm Width incl. chip conveyor 4,610 mm Height (saw frame lowered) approx. 2,195 mm Height (saw frame in maximum position) approx. 2,410 mm Material support height 700 mm Coolant: Coolant tank volume 150 l, Pump capacity at 3 m head 25 l/min Paintwork: Machine light grey RAL 7035 textured paint Saw  ...

The revolution in instrument reprocessing Careclave can be installed quickly and easily in any reprocessing room. Four process steps in one device, convincing advantages for your practice! Why use 4 products for the reprocessing of the instruments when you can have everything in one device? With Careclave, you save significantly more time, money and space in your dental practice from day one compared to conventional device combinations: 6,000.00 € less service costs: Because fewer devices cause less costs. Careclave is not only cheaper to buy, but also saves you extra maintenance and validation for additional devices. 45% more space in the reprocessing room: Your practice team knows that work space in the reprocessing room is precious. With Careclave, you have significantly more space for the safe reprocessing of your instruments! You can do without an additional care device ...

All items are sold on condition `as is and where is`. Ex work from current location excluding de-installation, de-hook up, discharge, packaging, crating and delivery. We are not responsible for any damage incurred during shipment.

Robot Automation Manufacturer Guarantor Type Basic Plus Nachi M212 Year of construction 2022 1960 Hours Was operated on a Gildemeister CTX 410. It is in a used, very good, 100% functional condition

An inline SMT stencil printer/solder paste printer is offered. Print area X/Y: 50mm/40.5mm - 510mm/508.5mm, PCB thickness: 0.2mm - 6mm, board weight max.: approx. 1kg, print pressure range: 0 - 20kg, core cycle time: approx. 12s, machine alignment capability: greater 2Cpk at +/-12.5µm 6 Sigma, process/wet print accuracy: greater 2Cpk at +/-25µm 6 Sigma, installation space L/W/H: approx. 2060mm/1500mm/1570mm, machine weight: approx. 800kg. Inspection by arrangement possible.

Positioning resolution: 1µm, max. placement rate: 6000cp/h, max. feeder capacity: 310, min. PCB dimensions X/Y: 50mm/50mm, max. PCB dimensions X/Y: 780mm/600mm, PCB thickness range: 0.5mm-3.5mm. Documentation available. An on-site inspection is possible.

The hydraulic automatic tilting kettle with a capacity of 600 liters is designed for professional use in the food processing industry. The hydraulic tilting system ensures easy and safe emptying of the contents. The double jacket with thermal oil provides even heat distribution and precise temperature control, making it suitable for cooking, mixing, and thermal processing of soups, sauces, jams, creams, and ready meals. Manufactured from high-quality stainless steel, it ensures durability, hygiene, and long service life. Technical specifications: Hydraulic automatic tilting kettle Manufacturer: Sind With cover Double jacket- thermal oil Volume: 600 liters Power: 30.7kW Made out of stainless steel Machine dimensions in cm: Length: 205 Width: 158 Height: 123

This 6-axis CLOOS QIROX QRC-350-E was manufactured in 2020. It features a maximum reach of 1550 mm and a payload capacity of 6 kN, making it suitable for various robotic welding applications. The system includes a welding positioner and a laser system for enhanced functionality. If you are looking to get high-quality robotic welding capabilities, consider the CLOOS QIROX QRC-350-E automation system we have for sale. Contact us for further details.

2008 HEIDELBERG STAHLFOLDER KH 78/4K-TK KH78+SPH-70+PFH 82 16 pages

cutting diameter: 255 mm dimensions of saw-band: 2750 x 27 x 0,9 mm cutting width: 200 x 320 mm cutting speed: 20 bis 80 m/min : 125 mm : 125 x 125 mm : 195 mm Impact energy: 350 mm connected load frequency: 400 Volt total power requirement: 1,5 kW weight of the machine ca.: 290 Kg dimensions: 1,1 x 0,8 x 1,75 m Double miter band saw -Miter cuts up to 60° left and 45° right -Vice with quick clamping device -Band tension control -Electr. Automatic cooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 235 mm dimensions of saw-band: 2645 x 27 x 0,9 mm cutting width: 280 x 190 mm cutting speed: 45/90 m/min : 120 mm : 120 mm : 190 mm Impact energy: 170 mm connected load frequency: 400 Volt total power requirement: 1,1 kW weight of the machine ca.: 290 Kg dimensions: 1,2 x 0,8 x 1,2 m Double miter band saw -Miter cuts up to 60° left and 45° right -Vice with quick clamping device -Band tension control -Electr. Automatic cooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Costarelli D1300 fully automatic agglomerator, 315 kW drive, was processing LDPE, can be used for film, fibers, fluff, light abd voluminous plastic materials to massive volume reduction., throughput rate around 1 Ton per hour, depending on moisture and material, including : loading conveyor belt, feeding belt, barrel diam.1.300 mm., extraction hopper, screw conveyor, roto-classifier, electric cabinet, 400 V 50/60 Hz, CE compliance certificate, electrical drawings, Users manual, Machine in very good conditions, -------------------------------------------------, watch some videos of similar agglomerators in the attached videos, capacity: 1.200 kg/h, conditions: very good, type: 1.300 mm , Totale power needed for this line: around 500 KVA, including belts, classifier, screws., Including: loading conveyor belt

Inv. Num. : 8986 Type: DH-250/4 Producer: WMW Created: 1983 Parameters: Length: 3400 mm Width: 2100 mm Height: 1600 mm Weight: 4800 kg

Automatic Cut, Strip and Terminate Machine manufactured in 2023. This WIRMEC AM310-117 features a programmable wire deposit unit, crimping unit with 20 kN force, and a 2 m conveyor system. It offers various processing functions including automatic wire cutting, double-sided wire stripping, and terminal insertion. If you are looking to get high-quality wire processing capabilities, consider the WIRMEC AM310-117 machine we have for sale. Contact us for further details.

Rotation autoclave, four-cage autoclave, full water system with rotation, autoclave diameter: 1100 mm, allowable operating pressure 6 bar, allowable operating temperature 200 degrees, content 3400 liters, with Siemens control and digital recorder Jumo., refurbished and inspected.

High-performance, completely stainless steel automatic grinder for industrial applications., Ideal for meat processing, pet food, and other protein-based products. Available immediately., Used machine from Seydelmann, overhauled in 2025 and not in use since., Largely rust-free, 2-turn working auger, 3-turn feed screw, - With 200 mm diameter perforated discs, - Control cabinet installed, - Dual-stage thermal overload control, 1. Impulse reduces feeder speed, 2. Pulse switches off main motor, - Approx. 400 liter funnel, - Conical feed screw made of stainless steel, Special casting, perpendicular to the working screw, - Solid stainless steel worm housing with hardened running surfaces, - Stainless steel bayonet fitting, - Electrically locked spillage hand guard, - Rocker switch on the top edge of the funnel, - Machine stand closed at the bottom with ventilation system, Three-phase motor IP  ...

Pilot - autoclave for product development., Suitable for all known heat sterilization and pasteurization processes:, Full water, sprinkling, pure steam and steam - compressed air - sterilization, possibility of rotation, Dimensions of the space available for products in the cage: W x D x H: 260 x 320 x 182 mm, Electrical connection value: approx. 1.5 kW, with booster pump: approx. 3.5 kW, steam connection:, Connection value: approx. 250 kg/h,, Steam pressure: 6 bar overpressure, compressed air connection:, Connection value: 0.6 Nm³/h, 6 bar overpressure, Drainage: hot water resistant up to 160°C, Connection value: 50 ltr/min, Weight: approx. 900 kg, matching:, Electrically heated steam generator, make Certuss, year of construction 2005, Installation, approval and TÜV monitoring-free, Technical specifications:, Steam output: max. 97 kg/h, power reduced to 63 kg/h, Heat output: max. 72  ...

D 545 AH Horizontal continuous film sealing machine for narrow or flat products., The pre-opened bags are sealed in a lying position, which is ideal for thin and flat products that cannot stand upright and would fall over when sealed. The integrated, height-adjustable conveyor belt can be pulled out up to 70 cm to seal larger products, as shown in the photos. Thanks to this particularly practical conveyor belt, you can seal packages of various sizes., This allows you to effortlessly provide almost all modern film types, including composite materials, with reliable, high-quality, 10 mm wide weld seams., More here:, .audion/de/webshop/verfugbare-produkte-im-webshop/d-545/d-545-ah-2/

Fully automatic labeling machine for self-adhesive labels K7,, Hourly output 500-800 labels / h, compact and on wheels, ideal for low power, space-saving, Standard equipment:, • Station for body labeling with brake motor, • Control panel with potentiometers, • Equipped for cylindrical glasses, bottles and smooth cans, • Monoblock construction in stainless steel, • Working direction from left to right, • Possibility to put in line, • Fixed bottle collection table 40x50cm, • Power connection 400 volts 50 Hz., • CE protections and user manual, • additional equipment front and back labels from the same roll incl. •, Weight: 200.00 kg, power: 500-800 labels / h

Closing machine, fully automatic, year 2018, ALWID Variant-SK/DST, The system consists of:, - a fully automatic sealing machine, type: ALWID-VARIANT-SK / DST,, with a rotating star and set up for a screwing head, for one can size and one screw cap size, with fully automatic, Cap sorting and cap feeding, with lining of the, Cap sorting / parts conveyor, - With anti-twist device, set up for a round can size, - as a solo machine with 1.0 mtr. Infeed conveyor belt and 1.0 mtr., Outfeed conveyor belt, with infinitely variable belt drive, with, Bottle conveyor made of belt system, with complete electric, Control, machine base in stainless steel design, control cabinet on the, outlet side, - with a 4-sided protective cover with panes made of MAKROLON with, Security doors in CE compliant design, with top cover made of, MACROLON, General Information:, Working direction: right - left, Working heig ...

x-travel: 780 mm y-travel: 560 mm z-travel: 560 mm total power requirement: --- kW weight of the machine ca.: 12,0 t dimensions of the machine ca.: --- m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Automatic small parts warehouse (AKL) with conveying technology for E3 - boxes (600x400x320mm), designed for 6 days per week, 2-shift operation,, Goods receipt: 60 - 200 containers per hour (intermittent),, Storage capacity: 14,000 containers - parking spaces,, Footprint: Length x Width x clear height: 72.00 x 52.00 x 13.80 m,, Description in the attached Word document.

A pharmaceutical sterilization autoclave Bosch (Schoeller-Bleckmann Medizintechnik) is available. Design: horizontal, doors: 2, chamber volume: approx. 1800l, process method: vacuum/steam/sterilization, sterilization goods: porous goods/solid instruments/components, max. liquid product volume: 50ml. Documentation available. An on site inspection is possible.

Variovac Rotarius semi-automatic tray sealer with a dual-tool system owes its name to its practical rotary table: while the machine vacuum seals and gas flushes trays in one station, the operator can simultaneously remove finished trays and load new ones at the front. This prevents downtime and increases output when packaging a wide range of products from both the food and non-food sectors. Film roll diameter: up to 300 mm. Tray depth: up to 100 mm. Tray depth for skin: up to 40 mm. Product protrusion: up to 25 mm. Packaging output: 4 to 8 cycles/min. Packaging types: MAP, Skin, Sealing. Compressed air: min. 6 bar. Electrical voltage: 7 kW - 230/400 V - 13 A - 50 Hz - 3 Ph. Busch RA 0063F vacuum pump. Control panel with Siemens S7-300 PLC and Variovac Touch screen operation panel. Pallet with foil available., Type of Machine: Tray sealer, Capacity: 4 to 8 cycles/min, Motor: 7 kW - 230/40 ...

Automatic desiccant cap assembly line (silica gel). Equipped with a dual-lane system and a multi-position rotary carousel, featuring cardboard punching units, volumetric dosing, plastic seal insertion, and quality control by machine vision and dynamic weighing. Year 2012. In good condition.

Fully automatic proofing machine Gäromat Miwe GVA 11 LHcreator : MiweType: GVA 11 L400 V 50Hz 3,5kWRdescriptionA used fully automatic proofer Gäromat Miwe GVA 11 L.Fully automatic proofer from Miwefor 1 trolley (60x100) with bottomInner dimensions: 70x100cm Height 190cmCondition: Baker's conditionDetails see pictures

Fully automatic proofing machine MIWE GVA Manufacturer : MIWE Type : GVA 21 K(S) Year of construction : 2002 Stainless steel Dismantled 400 V 50 Hz 4.9kW Total dimensions : W:166cm D:106cm H:253cm Wall thickness 6.5cm Bakery condition Details see picture

Inv. Num. : 9032 Type: Mec3000 Producer: Simec Created: 2019 Parameters: Switch-on hours: 9365 h Input length of the material: 6000–7000 mm. Parting diameter: 12–100 mm. Output length: 50–2000 mm.

Gildemeister GM16 AC, accessories:, - Cross slide in pos. 1; 2; 4; 5 (tot. 4 pcs), - pickup spindle pos. 6, - double slide in pos. 6 for rear operation, - chip conveyor, worm type, - piece unloading chute in pos. 6, - universal fixed / rotating tool holder spindles, - various cams, - stock reel and stand for bars 3 m, cutting tools and tollholders not included!, Country of origin: Italy, Number of spindles: 6, Max bar diameter [mm]: 16, Weight of the machine ca. [kg]: 3.800, Total power requirement [kVA]: 30, Auto bar loader: IEMCA PRA 40/33P

Used five-carriage autoclave from Steriflow type 1351 EA. Year of manufacture 2008.Capacity 6570 liters. Weight 2450 kg. CE 10 trolleys included. Acid-resistant design.

Two used autoclaves from Steriflow BarriQuand type S364 and S363.together with loading conveyors. Autoclave Specifications: Chamber capacity 5700 liters. Maximum operating temperature 150 °C. C Maximum operating pressure 5 bar Supply Voltage 400V Power 4 kW Dimensions 4700mm x 1700mm Weight approx. 2.5 T Year of manufacture 1987 Acid-resistant design.

BasysPrint 867 1500DPI Fully Automatic with 4 Cassettes and Bacher Punch One laser module with 2560 hours, optionally a second module can be offered. Operating counter plates: 404960 pieces Machine was discontinued due to plate conversion to thermal Dismantled by BasysPrint technicians and secured for transport. If you are interested, videos of the functionality can be sent via WhatsApp BasysPrint 867 1500DPI fully automatic printer with 4 cassettes and Bacher die-cutting unit One laser module with 2560 hours of operation; a second module is available as an option. Plate counter: 404,960 The machine was sold due to a plate conversion to thermal printing. Dismantled and secured for transport by BasysPrint technicians. If interested, videos of the functionality can be sent via WhatsApp.

Key data: 6 mm

Used Schütte SF32 Multispindle Automat Lathe with large number of spare parts and accessories! We sell 3 pieces of Schuette machines, with total 16 pallets of spare parts and accessories. More photos is added soon. Please ask more information if interested. Schuette SF32 - 6-Spindel - Drehspindelstillsetzeinrichtung - Schnecken Späneförderer - Gewindeschneideinrichtung mit Rücklauf

Heavy-duty lathe, lathe, lathe, lead and tension spindle lathe, lead and tension spindle lathe, automatic lathe -Manufacturer: WMW, automatic lathe type DRT 50m -Turning length: 550 mm -Turning Ø over bed: 530 mm -Spindle bore: Ø 63 mm -Spindle speeds: 9 - 450 rpm -Three jaw chuck: Ø 200 mm -Turret: with accessories, see photos -Drive motor: 5.3 / 6.8 kW -Dimensions: 2420/1040 / H1460 mm -Weight: 2200 kg

Underfloor circular saw, crosscut saw, pull saw, miter saw, panel saw, table saw, aluminum circular saw, panel saw -Manufacturer: Martin, panel saw type T 70 with automatic feed -Engine power: 11 kW -Speed: 1445 rpm -Saw blade: Ø 410 x 5 mm -max. Cutting height: 90° 140 mm / 45° 110 mm -Miter cut: up to 45° -Sliding table: 355 x 1500 mm -Dimensions total 2275/2010/H1400 mm -Weight: 1058 kg

Metal band saw, fully automatic, band saw machine, band saw, vertical band saw, horizontal band saw, hydraulic horizontal band saw machine, automatic band saw, automatic metal band saw -Manufacturer: DoAll, Horizontal band saw, Automatic band saw type C-916A -Cutting dimensions (flat): approx. 410 x 230 mm -Cutting data round: approx. 230 mm -Cutting data square: approx. 230 mm -Saw blade speed: continuously adjustable, 15 - 120 m/min -Engine power: 3 kW -Saw blade: approx. 4014 mm -Coolant system: present -Dimensions: 2080/1400/H1390 mm -Weight: 670 kg

Automatic drill, drill press, drill press, stand drill, pillar drill -Spindle mount: MK 3 -Transmission -Automatic drill: with rapid traverse -Automatic drilling -Threading: automatic -Table size: 450 x 360 mm -Projection: 285 mm -Spindle stroke: 150 mm -Speed: 180-2000 rpm -Feed: 0.08-0.32 mm/rev -Dimensions: 900/1000/H2100 mm -Weight: 840 kg

WEINIG Hydromat H23 – with 10 spindles, S/N 89321, built in 1999 WEINIG Cross Transport HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Roller Accelerator Model 814 Short infeed table with heavy 4-roller feed Automatic planing machine with reinforced KASCHWIG soundproofing booth 3-sided • Working width max. 230 mm • Working height max. 160 mm • Electronic feed frequency-controlled 8 – 80 m/min. • Feed motor 18.5 KW • 1st spindle bottom 11.0 KW • 2nd spindle right 11.0 KW • 3rd spindle left 11.0 KW • 4th spindle right 11.0 KW • 5th spindle left 11.0 KW • 6th spindle top 15.0 KW • 7th spindle bottom 11.0 KW • 8th spindle top 15.0 KW • 9th spindle bottom 15.0 KW • 10th spindle universal 11.0 KW (4-sided) • Spindle speed 6,000 rpm. • Spindle diameter ø 50 mm • All spindle motors with NEW ...