129,010 used machines on RESALE, but how to find them? Machine Search
I sell an automatic pneumatic Weinig Grecon Dimter Opticut 200 Elite Built in 2006. Motor power 7.5kW Entrance table automatic 4.10m (continuous system) Exit table automatic 6 ejectors on the right outlet table. Optimization with automatic defect detection and automatic cutting diagram programming. Available the same. CE equipment. Documents included.
Offer 25359 Specifications: Cutting range at 90° around 250 mm - flat 275 x 180 mm - Mitre adjustable left Schnittb. at 45° around 200 mm - Schnittb. flat at 45° 190 x 180 mm - Schnittb. flat at 30° 130 x 110 mm - Material support height approx. 920 mm Saw blade dimensions 3100 x 27 x 0.9 mm Cutting speed infinitely variable 15 to 100 m/min hydr. Lifting – lowering the saw frame Upper stroke limit of the saw frame Cutting pressure infinitely adjustable 0 - 10 m/min hydr. Material vise Micro Spray Coolant Device - Total drive power 400 V / 2.2 kW - Space requirement approx. W 2400 x H 1600 x D 1800 mm - Weight approx. 1300 kg - 3 x roller conveyor 1500 mm
max. format 80 x 120 cm Built in 1993 automatic destacker max. stacking height 100 cm Delivery date: immediately from stock Price on request. We supply and install worldwide.
CITIZEN CINCOM M32 CNC turning center built in 2011 in Japan provides precision drilling, threading and turning of workpieces with a maximum diameter of 32 mm. To improve the machining process, the machine uses two spindles (main spindle and back spindle) with high rotational speed and power. A specially designed bed with high thermal stability further reduces the impact of heat during machining, increasing the life and reliability of all components. All machining parameters are programmed in the intuitive CINCOM SYSTEM M6D CNC control with many useful functions. Among the functions available, the controller allows, for example, self-diagnosis of the machine or program backup. High reliability, precision and extensive machining capabilities make the CITIZEN M32 III swiss-type lathe the ideal choice for even the most complex applications. The offer also includes extensive additional ...
Code: 0028 Brand: OMG Model: EPM/70 Automatic slotting machine for blinds Technical data Spindle connection mm 10 Drill speed 12000 rpm Simultaneous machining of 2 sections 18 possible pitches with a single toothed rod Slots depth up to 25 mm Drill motor Hp 1,5 Slide motor Hp 1 Up to 20 slots / minute Inclination from from 90 degrees (vertical) to 0 degrees (horizontal) Max section dimensions mm 100 x 120 Automatic stop Overall dimensions: machine mm 1500 x 1000 x 1200 h - kg 490 - Rack mm 3200 x 100 x 200 h - kg 30
Gildemeister GM42 AC Hirth, - Spindle drum locking by means of a triad of HIRTH-type rings, - Cross slide including drive in pos. 1, 2, 4, 5, - Hydraulic pickup spindle, - Internal flushing for pickup spindle, - Spindle stop attachment for pickup spindle, - Hydraulic slide for rear working with two positions in pos. 6, - Pneumatic part catcher, - Conveyor belt for finished parts, - 5x frontal spindles, rotating, with internal coolant supply, - AC threading device, - Bar feed exclusion device, hydraulic, - Chip conveyor, worm type, including magnetic filter, - High pressure coolant system 100 bar, - CO2 fire fight system Total Walther, Number of spindles: 6, Max bar diameter [mm]: 42, Spindle speed [rpm]: 500 - 2.700, Max. bar feed in one station [mm]: 130, Max. travel of toolspindles [mm]: 120, Max. stroke of cross slides [mm]: 59 (pos. 1, 2) | 52 (pos. 3, 4, 5, 6), Max. stroke ...
Index MS 16C, CNC-Mehrspindelautomat, - single-NCU mit PCU, HSP Einzelantrieb, - INDEX-Steuerung SolutionLine, - Farbbilschirm 47 cm, - Signalleuchte Smartligth mit LED, - EG-Konform CE-Zeichen, max. Spindeldurchlass 16 mm, Schlitteneinheit 1.1, X-Achse und Z-Achse NC-gesteuert, Schlitteneinheit 1.2, X-Achse starr, Z-Achse NC-gesteuert, Schlitteneinheit 2.1, X-Achse starr, Z-Achse NC-gesteuert, Schlitteneinheit 2.2, X-Achse und Z-Achse NC-gesteuert, Schlitteneinheit 3.1, X-Achse und Z-Achse NC-gesteuert, Schlitteneinheit 3.2, X-Achse starr, Z-Achse NC-gesteuert, Schlitteneinheit 4.1, X-Achse starr, Z-Achse NC-gesteuert, Schlitteneinheit 4.2, X-Achse und Z-Achse NC-gesteuert, Schlitteneinheit 5.1, X-Achse und Z-Achse NC-gesteuert, Schlitteneinheit 5.2, X-Achse NC-gesteuert, Z-Achse starr, Schlitteneinheit 6.1, Z-Achse NC-gesteuert, Schlitteneinheit 6.2, X-Achse und Z-Achse NC-gesteuert, - ...
Used autoclave made by Spomasz Pleszew, type: WAA 22.
Packaging line Pack your own coffee pods fresh on our flexible coffee pod machine according to your needs. With the help of this machine, you can easily make coffee pods. The coffee pod packaging machine portions, compresses, seals and cuts the pods (soft pads) into their shape. Semi-Automatic Machine – Handmade Coffee Pads The semi-automatic machine produces coffee pods that are used in all common coffee pod machines. Common coffee pod filter paper is used. This allows you to produce coffee pods flexibly and as needed. The dimensions of the machine are 100x50x150cm (w,d,h). The coffee is ground in a separate coffee grinder and portioned in the packaging machine. Cleaning the machine is simple and straightforward. For more information, please contact us! Phone: 05683 3498433
VENETA MACCHINE Papper Feed Indexing Band Saw Wheel diameter 800mm Cutting width 16-180mm Maximum cutting height at feed 135mm Maximum cutting saw width 40mm Hydraulic Cutting Belt Tension Material Pulling Tape 2 rollers pulling from above Feed speed Automatic access to the desired size Quick select of 4 saved programs Motor power 5.5kw CE Certificate Net price 25.000PLN
Automatic cereal humidification equipment Fully overhauled, tested and painted
Inv. Num. : 8819 Type: KMX SWING 1032 Producer: MANURHIN Created: 2006 Parameters: Control system: FANUC 160i TB Hours: 39563 h Max. rod diameter: 32 mm Maximum turning length: 250 mm Number of axes: 10 pieces Maximum spindle speed: 8000 1/min Spindle bore: 33 mm Length: 3370 mm Width: 1420 mm Height: 1985 mm Weight: 4250 kg Equipment: Conveyor IEMCA BOSS 332 E/32L Bar Feeder
Offered is a fully automatic strapping machine for PP strap, year 2006. The machine has defects. Electronic strap tension control 50-450N, polypropylene (PP) strapping band width: 12mm, core diameter X/Y 200mm/280mm, heat-seal joint, cycle performance 30 strappings/min, package dimensions X/Y: min approx. 100mm/30mm, machine dimensions X/Y: 1450mm/600mm, working height: 800mm, weight: approx. 220kg. Inspection possible by arrangement.
Weighing range min.: 175g, temperature range: 10-40°C, voltage: 230V, frequency: 50Hz, with EC declaration of conformity. An on-site inspection is possible, not under power.
IBERICA JRK 105 with Blanking year 2000 A DIE-Cutting press of size 75 x 105 cm (29 517 Hours) Including : Stripping and Blanking Station, NON-Stop Feeder, Control and Pull Lay System, Mini. Paper thickness 90 g/m2, Max. Cardboard thickness 1,5 mm, Max. corrugated 3 mm, Chases and Frames, 300 Tons Cutting Pressure, Speed 8 500 S/Hours. In good Condition, Immediately available
Modula Lift ML50D Vertical Storage Lift Modula are automatic vertical carrier storage systems based on the concept of vertical storage and saving floor space. You can store any type of material safely, cleanly and efficiently, saving up to 90% of floor space. The Modula are the result of more than 30 years of experience of an Italian company with high-tech products • Minimal energy consumption • Automatic weight monitoring during beam retraction • Dynamic storage location assignment of the carriers in the device according to the heights of the stored goods • Equipment frame made of galvanized steel profiles • Vertical drive with steel-core reinforced Eagle timing belt • Extractor guide system with 6 HDPE rollers per side • Management of the carriers with differentiated payload Manufacturer: Modula Year of Make: 2021 Model: Modula Lift ML 50D Height: ...
Modula Lift ML50D Vertical Storage Lift Modula are automatic vertical carrier storage systems based on the concept of vertical storage and saving floor space. You can store any type of material safely, cleanly and efficiently, saving up to 90% of floor space. The Modula are the result of more than 30 years of experience of an Italian company with high-tech products • Minimal energy consumption • Automatic weight monitoring during beam retraction • Dynamic storage location assignment of the carriers in the device according to the heights of the stored goods • Equipment frame made of galvanized steel profiles • Vertical drive with steel-core reinforced Eagle timing belt • Extractor guide system with 6 HDPE rollers per side • Management of the carriers with differentiated payload Manufacturer: Modula Year of Make: 2013 Model: Modula Lift ML 50D Height: ...
Modula Lift ML50D Vertical Storage Lift Modula are automatic vertical carrier storage systems based on the concept of vertical storage and saving floor space. You can store any type of material safely, cleanly and efficiently, saving up to 90% of floor space. The Modula are the result of more than 30 years of experience of an Italian company with high-tech products • Minimal energy consumption • Automatic weight monitoring during beam retraction • Dynamic storage location assignment of the carriers in the device according to the heights of the stored goods • Equipment frame made of galvanized steel profiles • Vertical drive with steel-core reinforced Eagle timing belt • Extractor guide system with 6 HDPE rollers per side • Management of the carriers with differentiated payload The vertical storage system has been regularly serviced by the manufacturer ...
CONTROLS conventional BASIC FUNCTIONS number of spindles: 6 WORKING RANGE TURNING turning diameter (max): 20 mm bar diameter (max): 20 mm worpiece length max.: 100 mm MAIN SPINDLE spindle revolutions (min): 214 /min spindle revolutions (max): 5168 /min number of gears: 81 drive power: 11 kW DIMENSIONS / WEIGHTS space requirements -left/right-: 6000 mm space requirements -front/back-: 2000 mm total weight approx.: 5600 kg Technical Data - Max. diameter of hexagonal rods: 17 mm - Max. diameter of square rods: 14 mm - Max. stroke of sidecars: 42 mm - Forward and backward movement of sidecars: +/- 8 mm - Max. stroke of axial carriages: 50 mm - Forward and backward offset of axial ca
CONTROLS conventional BASIC FUNCTIONS number of spindles: 6 WORKING RANGE TURNING swing diameter (max): 20 mm turning diameter (max): 20 mm bar diameter (max): 20 mm MAIN SPINDLE spindle revolutions (max): 5168 /min ELECTRICAL SPECIFICATIONS total power consumption: 11 kW mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 5680 mm space requirements -front/back-: 1400 mm total weight approx.: 5000 kg tech. details: - max diameter hexagonal bars 17 mm - max diameter square bars 14 mm - max advancement bars 100 mm - max stroke axial carriages 50 mm - Offset of axial carriages forwards and backwards +/- 8 mm - Max stroke tool holder spindles 86 mm - Offset of tool spindles forward and backward +/- 11 ...
CONTROLS PLC SIEMENS BASIC FUNCTIONS number of spindles: 6
CONTROLS conventional BASIC FUNCTIONS number of spindles: 6 WORKING RANGE TURNING turning diameter (max): 20 mm bar diameter (max): 20 mm worpiece length max.: 100 mm MAIN SPINDLE spindle revolutions (min): 214 /min spindle revolutions (max): 5168 /min number of gears: 81 drive power: 11 kW X/Z SLIDE number of tool positions (total): 12 ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 6000 mm space requirements -front/back-: 2000 mm total weight approx.: 5600 kg Technical Data - Max. diameter of hexagonal rods: 17 mm - Max. diameter of square rods: 14 mm - Max. stroke of sidecars: 42 mm - Forward and backward movement of sidecars: + ...
CONTROLS electronic controls SIEMENS BASIC FUNCTIONS number of spindles: 6 WORKING RANGE TURNING turning diameter (max): 32 mm bar diameter (max): 32 mm worpiece length max.: 125 mm MAIN SPINDLE spindle revolutions (min): 260 /min spindle revolutions (max): 3080 /min number of gears: 2 ELECTRICAL SPECIFICATIONS total power consumption: 14 kW mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 5750 mm space requirements -front/back-: 1300 mm total weight approx.: 8200 kg Machine completely overhauled and NEW (still in packaging) Technical Data - Max. hexagonal bar diameter: 28 mm - Max. square bar diameter: 22 mm - Max. longitudinal slide stroke: 125 mm - Extraction thread u ...
CONTROLS electronic controls SIEMENS BASIC FUNCTIONS number of spindles: 6 WORKING RANGE TURNING swing diameter (max): 32 mm turning diameter (max): 32 mm bar diameter (max): 32 mm worpiece length max.: 125 mm MAIN SPINDLE spindle revolutions (min): 260 /min spindle revolutions (max): 3080 /min ELECTRICAL SPECIFICATIONS total power consumption: 14 kW mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 5750 mm space requirements -front/back-: 1300 mm total weight approx.: 8200 kg tech. details: - max. diameter hexagonal bars 28 mm - max. diameter square bars 22 mm - max advancement bars 175 mm - max length shooting 100 mm - max stroke longitudinal carriages 125 mm - Trigger t ...
Some Siemens and Vacon automation components are available. 1) Frequency inverter Vacon NXS00225. 2) Power module Siemens Simodrive 611 50A. 3) 2x power module Siemens Simodrive 611 25A. 4) 5x infeed module Siemens Simodrive 611 10kW/25kW. 5) 3x infeed module Siemens Simodrive 611 5kW/10kW. Documentation available. On-site inspection is possible. All articles are new.
Automatic log cutter / strand cutter for ceramic masses. Separation is carried out by means of cutting brackets with metal wire. Maximum passage: 360 mm wide / 180 mm high; Drive: 1.5 kW (left in working direction); Measuring tape: 320 mm wide x 750 mm long. The cutting thickness and length can be adjusted via changing wheels and measuring roller. The scope of delivery includes various interchangeable wheels and height-adjustable spindle feet.
FOLDER STAHL T 56/4FB2 -Year 1987 -High pile feeder -Four buckles Min./max. size 150x210 mms / 560x840 mms -Air pump, Delivery -All rollers in nice conditions -Available immediately
Langguth Deckler+Labeller sysLAN 720+selfLAN 510 Automatic capping and adhesive labeling in one machine Very good condition, straight from production
Manufacturer: ASYS Model: INSIGNUM 2000D Scan Year of Manufacture: 2018 TECHNICAL SPECIFICATIONS Nominal Voltage: 230 / 115 VAC Working Voltage: 24 V DC Frequency: 50 / 60 Hz Full Load Current: 1.5 / 3.0 A Number of Phases: 1 Power: 0.32 kW (320 W) Circuit Breakers: 10 A Pressure: Not applicable Flow: Not applicable DIMENSIONS Length: 1.2 m Width: 0.6 m Height: 1.8 m WEIGHT 200 kg NETWORK CAPABILITY Yes CERTIFICATION CE Marked APPLICATION Industrial automation / scanning system Find more here - / Contact us at -
miter: ja cooling: ja weight of the machine ca.: 400 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
TRAUB TNM 28 sliding head lathe was built in Germany by TRAUB Drehmaschinen GmbH. The machine, which is distinguished by its high efficiency, is the perfect choice for precise, multi-axis machining of workpieces with a maximum length of 200 mm. All machining processes, i.e. drilling, threading and turning, are performed fully automatically inside a large work space. In order to obtain excellent repeatability of the manufactured parts, the TRAUB TNM is equipped with components of the best technical parameters, i.e. two reliable spindles and an 8-position turret. All this is complemented by an easy-to-use CNC controller with many useful functions. The TRAUB TNM 28 CNC automatic lathe weighs approximately 3000 kg. Technical specifications of the TRAUB TNM 28 CNC turning center - feed in the X/Z axis: 60/200 mm - rapid traverse in the X/X2/Z axis: 15/15/30 m/min - driven tool rotationa ...
General Manufacturer: MEP Type: Cobra 352 NC 5.0 Year of Make: 2017 Control: Volution TS50 Cutting speed: 1,700 / 3,400 rpm Saw blade diameter: 350 mm Cutting performance Round tube: 120 mm Square tube: 105 / 100 mm Rectangular tube: 180×70 / 135×60 mm Solid material round: 50 mm Solid material square: 80 / 55 mm Solid material rectangular: 160×35 mm Dimensions and weight Dimensions: 1,750 mm x 2,360 mm x 1,700 mm Weight: approx. 600 kg Condition Condition: Used Functional: Tested and fully functional
Fabricante :GURUTZPE Modelo :A-1000 4G X 5.000 Año :2003 CNC :SIEMENS SINUMERIK 840 D Capacidades y avances: Altura de centros :450 mm. Distancia entre puntos :5.000 mm. Recorrido carro transversal :530 mm. Recorrido carro longitudinal :5.000 mm. 3º guía de apoyo para el carro :INCLUIDO Volteo máximo sobre bancada :900 mm. Volteo máximo sobre carro transversal :650 mm. Anchura bancada :970 mm Avance rápido ejes X / Z :10 m/min Cabezal: Revoluciones del cabezal :0-1.600 rpm Nº de gamas automáticas de cabezal :2 Potencia motor principal :28/34 kW Paso de barra de cabezal :105 mm. Torreta: Tipo torreta :SAUTER 0.5.320.025 Posiciones torreta :4 Tamaño herramientas :280x280 mm. Contrapunto: Diámetro de la caña del contrapunto :140 mm. Eje W - contrapunto motorizado controlado por CNC :INCLUIDO Equipamiento adicional: Puerta delantera :INCLUIDO Pr ...
GENERAL Project No.: 905818 Quantity: 1 pcs. Manufacturer: PRESSTA-EISELE Type: Profilma 502 ST-V Control: Siemens S7 Year of manufacture: 2023 Condition: Used machine GENERAL TECHNICAL DATA Air connection 6-8 bar Mains fuse 16 A NOTE Combined saw and punching machine with vertical punching unit (for aluminium processing, etc.). Max. saw height approx. 95 mm with new 500 mm saw blade. Punching process via a hydraulic cylinder vertically from above, punching stroke max. 20 mm, punching force 300 KN, cycle time per double stroke (forward-back) 2 sec. The machine has only been running for a few hours and is virtually in new condition! We have described the named product with the greatest possible care. However, since this does not come from our production, the data mentioned and the equipment details may differ. We therefore ask you to consider the description as ...
GENERAL Project No.: 905819 Quantity: 1 pcs. Manufacturer: PRESSTA-EISELE Type: Profilma 540 BG Control: Siemens S7 Year of construction: 2024 Condition: Used machine GENERAL TECHNICAL DATA Air connection 6-8 bar Mains fuse 63 A NOTE Combined saw-drilling-tapping machine with vertical drilling unit for e.g. combination tool for drilling and tapping up to 8 profiles at the same time (for aluminium machining, etc.). Cutting area approx. 400x58 mm with new 500 mm saw blade. 2x 4 spindle drill head to accommodate 4 tools each, distance of the spindle 35mm, distance between the sets of 4 spindles, 80mm. The machine has only been running for a few hours and is virtually in new condition! We have described the named product with the greatest possible care. However, since this does not come from our production, the data mentioned and the equipment details may differ. ...
Inv. Num. : 8258 Type: XE35N Producer: Hanwha Created: 2018 Parameters: Switch-on hours: 8482 h Operating hours: 6915 h Maximum turning length: 60 mm Maximum spindle speed: 6500 1/min Spindle bore: 35 mm Length: 2060 mm Width: 1440 mm Height: 1760 mm Weight: 2750 kg Equipment: Collets Chip conveyor Bar Feeder 2 driven holders on the sub-spindle C-axes on both spindles Medium pressure pump (15 bar) Guide tubes
Suction Feeder, 2 Pockets, Compressor, Table Folding Machine
High Speed Paper Folding Machine, Counting and Batching, Digital Plate Adjustment For Accurate Reading, Sound Hoods, 6 Fold Types, Double Sheets and Jam Detector, Suctuion Feeding, Complete with Perforation Unit and Perforation Blades, Up To 240gsm, Speed: 27000 Sheets/Hours
X16374-151 Automatic Riveting Machine for M8 claw nuts Manufacturer: NAGAYAMA, Model: CB/NHF & NHF T-nuts, Year of Manufacture: 2015 Serial no YN-2015-10 Made in Japan
Automatic horizontal band saw for cutting slats mod. TS400 – CE compliant - Dual-speed device - Max cutting capacity 420x200 mm. - Belt blade distance 2-150 mm. - Minimum cutting thickness from top 0.75 mm - Diam. flywheels 800 mm. - Flywheel width 50 mm. - Blade length 5500 mm. - Mixed oil cooling system - Hydraulic tensioning system 2500 kg - Variable feed speed 0-25 m/min - 2 hp feed motor with inverter - Main motor with 30 hp inverter - Lifting motor 0.5 hp - Nr. 3 suction ports 100 mm. - IE3 motor - Offset device - Matr. 15084 - Year 2022 - COMPLETE WITH MANUAL AND CE CERTIFICATION
Central lubrication unit, gear pump unit, MFE5-BW30+399, SKF, mint condition Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - comes from a spare parts warehouse of a certified production facility, - Minor damage to the level indicator plug without functional impairment. Technical data: - Central lubrication unit, MFE5-BW30+399, Vogel/SKF, new - Gear pump MFE5-2000+299, - 0.5 L/min, max. 28 bar, 230/400 V, 2700 rpm - 50 x 35 x 55 cm high - Includes level indicator - Includes level monitoring 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund th ...
Used Lagarde autoclave. New: 1978. Capacity: 4693 dm³. Vessel diameter: 1200 mm. Operating pressure: 5 bar. Maximum pressure: 7.5 bar. Maximum operating temperature: 151°C.
This Bystronic ByTrans 3015 Standard was manufactured in 2014. Ideal for automation systems, it offers reliable performance for handling tasks. Consider the opportunity to buy this Bystronic ByTrans 3015 Standard automation system. Contact us for more information.
This FANUC M-2000iA/1700L was manufactured in 2018. A robust and reliable piece of equipment, its ideal for those looking to enhance their automation capabilities. Consider the opportunity to buy this FANUC M-2000iA/1700L. Contact us for more information.
maximum number of results exceeded
please refine your search
