cam auto used for sale

HYMER MLT 580 4x4 – MERCEDES SPRINTER – OFF-ROAD PREPARATION & LONG RANGE Superb Hymer MLT 580 4x4 on the Mercedes-Benz Sprinter, put on the road in 12/2022, with only 46,398 km. High-end motorhome that is particularly well equipped and impressively prepared for comfortable travel, even off the beaten track. Diesel engine 1,950 cc – 140 kW / 190 hp, 4x4 transmission and GVW 4,100 kg. One of its main strengths is its off-road preparation: Van Compass Stage 4.3 suspension with adjustable Falcon shock absorbers, suspension reinforcements, air suspension with compressor, TÜV documented track flares, BFGoodrich All-Terrain tyres, Bravo snorkel, external spare wheel and towbar. The range has also been particularly well cared for: 200 Ah lithium battery, booster with charging while driving, 2,000 W converter, solar panels installed on the roof, gas installation with tank and complet ...

Benimar Mileo 297 – 1st commissioning 20-03-2025 – 17,535 km – 9-speed automatic Benimar Mileo 297 with date of first commissioning 20-03-2025 and a mileage of 17,535 km . The motorhome is equipped with a 103 kW (140 hp) engine and a 9-speed automatic transmission . The maximum permitted weight is 3,500 kg and the unladen weight is 3,097 kg . Equipment Northautokapp (winter package) Electrically operated bicycle carrier Thule awning Large fridge 9-speed automatic transmission Vehicle data Brand/Model: Benimar Mileo 297 Date of 1st commissioning: 20-03-2025 Mileage: 17.535 km Engine power: 103 kW (140 hp) Transmission: Automatic (9 gears) GVW: 3,500 kg Weight: 3.097 kg The motorhome is sold in the condition it is in at the time of the auction. Buyers are advised to carefully consult the photos and any inspection or c ...

FUJINON A13x6.3BRM-SD – Camera Lens The focus cannot be adjusted. The lens requires further inspection and repair by an authorised service. Auction-ID: A1-50232-91

Equipped with, among other things: Roof air conditioner Rear camera Bike rack Cruise control Awning Screen door SCM gearbox lock Stove Ring heating Pleated blackout side windows Pleated blackout front window Television Auction-ID: A1-40314-3

Tuttnauer T-Edge 10 Tabletop Autoclave The T-Edge 10 and T-Edge 11 are space-saving benchtop autoclaves that give you high-speed, Class B performance. You'll save time so you can help your patients while meeting current international standards and regulatory requirements to protect your staff and patients. Fully automatic autoclaves that give you time to treat your patients. The T-Edge 10 and T-Edge 11 autoclaves operate daily without interruption, providing efficiency and safety. User-friendly touchscreen control panel. Quickly view programs, cycle times, water levels, and more. Advanced documentation and traceability options. For security and regulatory reasons, scan barcode data (including expiration date) for the patient record during treatment. Personalized username and password Printouts to store printouts (optional printer). Sophisticated data analysis capabil ...

Tuttnauer T-Edge 10 W Tabletop Autoclave The T-Edge 10 and T-Edge 11 are space-saving benchtop autoclaves that give you high-speed, Class B performance. You'll save time so you can help your patients while meeting current international standards and regulatory requirements to protect your staff and patients. Fully automatic autoclaves that give you time to treat your patients. The T-Edge 10 and T-Edge 11 autoclaves operate daily without interruption, providing efficiency and safety. User-friendly touchscreen control panel. Quickly view programs, cycle times, water levels, and more. Advanced documentation and traceability options. For security and regulatory reasons, scan barcode data (including expiration date) for the patient record during treatment. Personalized username and password Printouts to store printouts (optional printer). Sophisticated data analysis capab ...

Tuttnauer T-Edge 10 W Tabletop Autoclave The T-Edge 10 and T-Edge 11 are space-saving benchtop autoclaves that give you high-speed, Class B performance. You'll save time so you can help your patients while meeting current international standards and regulatory requirements to protect your staff and patients. Fully automatic autoclaves that give you time to treat your patients. The T-Edge 10 and T-Edge 11 autoclaves operate daily without interruption, providing efficiency and safety. User-friendly touchscreen control panel. Quickly view programs, cycle times, water levels, and more. Advanced documentation and traceability options. For security and regulatory reasons, scan barcode data (including expiration date) for the patient record during treatment. Personalized username and password Printouts to store printouts (optional printer). Sophisticated data analysis capab ...

Tuttnauer T-Edge 11 Tabletop Autoclave The T-Edge 11 fully automatic sterilizer is much more than just an autoclave Your skills are needed in your practice and your time is a crucial factor. T-Edge therefore frees you from unnecessary effort. Meets strict international standards Clinically proven applications High-resolution touchscreen Innovative technology Easy-to-use interface Elegant design Excellent user experience Sterilization at the touch of a button Select the desired program and press "Start" The autoclave takes care of everything else - "click and go". Technical data Kammerabm. ø x L: 280 x 460 mm Chamber volume: 27 litres External dimensions D x H x W: 500 x 500 x 580 mm Shell dimensions (D x H x W): 421 x 207 x 20.5 mm Power supply: 50/60Hz, 230V-1Ph+N+GND Connections: 1 Ethernet port, 2 USB ports, Wi-Fi, integrated connection for automatic water ...

Automatic Shrink Wrapper automatic overlapping film Technical Specifications & Performance Data L 12,500 mm x W 1,700 mm x H 2,200 mm, approx. 4,650 kg, 50 Hz. Fully automatic with overlapping film and a welding bar system for secure seals. The machine supports straight-through or 90° infeed configurations and produces film-only multipacks or film plus flat carton/tray bundles, with format changes handled through recipe settings and mechanical guides. Throughput is up to 30 bundles/min (format- and product-dependent). Category: Shrink Wrapper (automatic overlapping film, welding bar) Condition: New Production speed: up to 30 bundles/min (format- and product-dependent) Infeed: Multi-lane conveyor grouping with straight or 90° orientation options Bundle options: Film-only and film with flat carton/tray (configurable) Film handling: Overlapping shrink film with adjustable welding bar widt ...

Semi-Automatic or Automatic Shrink Wrapper with welding bar – New The automatic machine, is very fast format changes, 90° product feeding belt, possibility of introducing product up to three rows with eccentric system, the pusher works without air and has a motor controlled by inverter and encoder, perfect to be inserted in automatic lines. Production can vary according to the number of rows required. Suitable for packaging individual or groups products in multiple lines in the desired format, such as boxes, packets of coffee, trays etc. Automatic and semiautomatic machines with welding bar, with product feed conveyer in line, set up for manual loading of the product on the belt or inserted in completely automatic lines . Represent maximum simplification in bundling machine. Created with a single supporting structure. Suitable for packaging individual or already assembled products suc ...

Semi-Automatic or Automatic Shrink Wrapper with welding bar to 22 P/M – New Automatic shrink wrapper with product feed conveyor in line set up for manual loading of the product on the belt or inserted in completely automatic lines. Suitable for packaging individual or already packaged products such as boxes, trays, hanks of cable, parquettes, or light to very light products with a minimum height of 3 mm such as boxes, linen, reams of paper, magazines, leaflets. Possibility of total closing of the bundles by means of superimposition and lateral auto-gluing. The single-block systems with welding unit and tunnel in a single robust structure were designed to have reduced external dimensions making them compact and reliable, suitable for packaging products with heat shrinkable flat leaf” polythene film, individual or grouped products with just film, or film plus cardboard divider or tray. ...

The circuit breakers of the S 200 series protect cables and wires against overload and short circuits in accordance with DIN0100-430 and DIN0100-530. They comply with building regulations DIN0641-11 or IEC/EN 60898-1, DIN0660-101 or IEC/EN60947-2 and UL1077. Its patented connection terminal ensures easy and safe contacting and handling by means of a pressure plate. For better visibility during wiring, the connection opening for cables is located above the connection opening for the phase rail. Conductor cross-sections up to 35 mm² can be connected directly to the device via the connection terminal with insulation in protection class IP20. Auction-ID: A1-49360-43

The circuit breakers of the S 200 series protect cables and wires against overload and short circuits in accordance with DIN0100-430 and DIN0100-530. They comply with building regulations DIN0641-11 or IEC/EN 60898-1, DIN0660-101 or IEC/EN60947-2 and UL1077. Its patented connection terminal ensures easy and safe contacting and handling by means of a pressure plate. For better visibility during wiring, the connection opening for cables is located above the connection opening for the phase rail. Conductor cross-sections up to 35 mm² can be connected directly to the device via the connection terminal with insulation in protection class IP20. Auction-ID: A1-49360-41

The circuit breakers of the S 200 series protect cables and wires against overload and short circuits in accordance with DIN0100-430 and DIN0100-530. They comply with building regulations DIN0641-11 or IEC/EN 60898-1, DIN0660-101 or IEC/EN60947-2 and UL1077. Its patented connection terminal ensures easy and safe contacting and handling by means of a pressure plate. For better visibility during wiring, the connection opening for cables is located above the connection opening for the phase rail. Conductor cross-sections up to 35 mm² can be connected directly to the device via the connection terminal with insulation in protection class IP20. Auction-ID: A1-49360-42

Wolf Sanoclav Autoclave LaM-3-20-MCS-J. Capacity 20 L. Max. pressure: 3 bar. Max. temp: 143°C. External dimension 410x530 mm. THE LIST OF LOTS IS NOT DEFINITIVE, IMPORTANT LOTS WILL BE ADDED LATER, PLEASE CHECK THE ADDED LOTS. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force Auction-ID: A1-49883-1

Capacity: 125 ton, Strokes per minute: 85-500 / min, Slide: 870 x 550 mm, Plate width: 260 mm, Year of manufacturing: 1980

Precast - Wall - Filigree - factory. Good as new circulation system: 60 pallets with 3.5 mx 8 m, 3 x lateral transport of pallets - Facilities, 1 x vibrated concrete station, new control - Beckhoff. Concrete distributor Crane 1.4 m³. Friction wheels. Roller blocks. Planning and installation as required. Formwork on request. Is dependend on the application. For low cost housing, cmodul austria low cost housing Affordable housing Low-cost housing Mixing system 1 m³ at extra charge. Tilting device if needed for concrete slabs vertical-tansport at extra charge. Cran for stock handling at extra charge. Projects for social housing are our daily work. Civil work plans, drawings and calculations, we can create for you. Similarly, profitability calculations.

We will be happy to send you further information, pictures and similar products. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the seller until full payment. intermediate sale, other use, Exploitation and error are expressly reserved. Yours sincerely Trade ...

Poly-clip PDC 600 Semi Automatic Double Clipper, for fibrous, plastic, natural and collagen casings, calibres up to 90 mm, on a trolley, Suitable for following clip sizes: S 625 / 628 / 632 / 638, upon request with separator, in good condition!

Halbautomatischer pneumatically operated hand filler, ATEX compliant, any filling volumes from 20-1000 ml with different dosage piston, higher dosing volumes with multiple hub possible, suitable for filling liquid and semi-solid products

Separating hunters circular saws - machine with workpiece feed device. Machine is fully functional. Saw blade diameter 360 mm Workpiece dimensions 200 x 90 mm flat material Cutting speed 3000 rpm. Voltage: 3 x 380 V 50 Hz Control voltage: 220 V Performance: 11 15 a Machine number: 606 Wiring diagram number: 23.04.052

automatic CUTTING BORING and MOULDING machine BACCI TTF1 2TM . second hand machine working conditions : Excellent hydraulic drive of all the movements volt. 380/50 CE mark : YES Machine suitable for assembling part of chairs, tables, frames, furniture, wheelchair frames, etc. The BACCI TTF1 2TM performs the operations of cutting , milling and drilling at the end of the piece, either singularly or differently combined . the milling unit is composed of n.02 spindle moulders ( anti-splinter system ) machine composed by 3 working units : 1- Cutting unit : circular saw max.diam. mm.400 motor power Hp 3 2- Boring unit : boring head with 5 mandrins motor power Hp 3 3- Moulding unit . with automatic movement of the carriage on recirculating ball bearings n.02 spindle moulders (anti-splinter) motor power Hp 7,5 spindle diam. mm.35 hydraulic unit motor power Hp 2

Flaring system for sewage gas combustion - Mint- Manufacturer: Haase Maximum flow rate: 10 m³/h Gas pressure: 15-50 mbar Material: Stainless steel (V4A) Diameter: 150 mm Total height: 4.500 mm Emissions: CO2 and NOx to TA-Luft in the range of 50-100% of the maximum power. Flaring system is unused. Only a test run was conducted so as new and in very good condition! System is still built and can be visited at any time!

VakuuCar +. Modern mobile work station with vacuum clamping device and height adjustment. Set your workstation to your workpiece. Size 1200 x 800 mm Height 850-1,050 mm Flat suction pad round, India. 190 mm elongated 280 x 80 mm Weight 115 kg VakuuCar +. Modern mobile work station with vacuum clamping device and height adjustment. Set your workstation to your workpiece. Size 1200 x 800 mm Height 850-1,050 mm Flat suction pad round, India. 190 mm elongated 280 x 80 mm Weight 115 kg G & BAR-BV-1 Optional equipment: Swing frame, additional cleaner, vise, Extensions Drawers & BAR-BV-08-74 Accessory tray G & BAR-BV-08-78 Optional equipment: Swing frame, additional cleaner, vise, Extensions Drawers & BAR-BV-08-74 Accessory tray G & BAR-BV-08-78

Herding® Multicoater Unused New, 3 pieces available e.g. film coats of tablets During the spraying phase, a very fine dust is produced during the film coating of tablets, which is extracted from the fluidized layer into a filter device with a defined air flow. The dust is sticky and without the precoating material forming a protective layer on the filter, the surface would stick very quickly. The Multicoater is a pneumatically operated dosing device and is usually operated with inert gas. It consists of a template container including control and conveying technology and is filled via a loading opening in the housing cover. The dosage is done via an injector pressure pump with a flow rate of 1.3kg/min. The MultiCoater has an internal control system that automatically controls the flow of the fluidizing, conveying and rinsing sequence.

Semi-automatic/hydraulic Hacksaw Manufacturer: machine tool factory Silistra Type: OH 163.01 Serial No.: 970 Year of construction: 1972 Technical data: E supply: 380 V, plug 16 A

Used semi-automatic batcher granules machine, type DP/3. Production - Italy. New 2005. Stainless steel.

Rod tube

multi spindle automatic lathe Schuette SF 13 built in 1991 - pick up with back side tooling -Thread cutting gear - chip conveyors - PLC control and much more.

Korimat KA 160 autoclave, 120 liters, 1.6 bar, mc control, as an autoclave for sterilizing including the measuring of the core temperature, as a rapid pressurized boiler for cooking meat, vegetables, soaps, and ready-to-serve meals, electrically heated, mottled surface. You are very welcome to test the machine in our facility in Koblenz, Germany.

Autoclave, Autoclav, Impregnation Chamber Overpressure Chamber Used Type: HP 2166-68 Volume approx. 6.8 m3 Length inside approx. 5 m Diameter inside approx. 1.5 m Large door on the end side approx. 1.5 m in diameter Max temperature: 140°C Pressure max 10 bar Dimensions outside approx.: 5600 x 1800 x 2500 mm 6 pieces in stock The autoclaves are used for sterilization of equipment, tools and materials. They can be used in the chemical industry, medicine and also in the processing industry for vulcanizing tires and rubber products or for printing impregnation. The system is completed according to your wishes by our own special machine construction. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

AUTOMATIC HYDRAULIC GUILLOTINE type MONGUZZI TRA 2600 Second hand machine Volt. 380/50 Working conditions : good Technical details : max. useful cutting length mm. 2650 max. useful cutting heigth mm. 100 max. useful cutting width mm. 1000 min. useful cutting width mm. 40 hydraulic motor power Hp 5,5 net weigth kgs. 2600 CE mark : NO

Size max 355 x 250 mm min 115 x 100 mm Speed max 4200 c/h Number of stitches Standard 7 Dimension 1500 x 1400 mm ; working condition

Korimat KA 160 autoclave, 120 liters, 2.5 bar, mc control, as an autoclave for sterilizing including the measuring of the core temperature, as a rapid pressurized boiler for cooking meat, vegetables, soaps, and ready-to-serve meals, electrically heated, smooth surface. You are very welcome to test the machine in our facility in Koblenz, Germany.

12 stueck, see pictures

High-performance band sawing machine for cutting pipes and round material in multi-channel process with symmetrical material supply and discharge on both sides Manufacturer ZS-Technology Meissen Type MKS 6/2 Built in 1998 - 9 two-sided assignable pipe ducts - max pipe length 8,000 mm - Cycle time approx. 90 sec. / Stroke=5 sec. / pc. - max. section length 100 mm - Diameter 20 - 100 mm Materials Structural steels, C-steels, low-alloy steels, rolling bearing steel (especially 100Cr6) Pipe dimensions / pipe sections - Pipe outside 25 - 128 mm - Pipe wall thickness 3.2 - 16 mm - Pipe length 6,000 mm Required footprint for all components 7,000 x 16,200 mm Search terms: band saw machine, multi-channel band saw, backdrop band saw, high-performance band saw machine

HEIDELBERG Stahlfolder RFH 66/4 BCUH of 2007 16 pages combined. International - English & German fold A folding machine of 66 cm, config; -1St unit 4 x. Pockets, round pile feeder + 3 x. Knives KTL = 16 pages - int. English or German folds > > Option: VF-66 2006 - Mobile knife / total fold 32 pages < < Delivery St. Unit TSH 70 presser stacker Condition; VERY GOOD condition, immediately available, Can be lakes in our factory at Strasbourg FR

Multi spindle automatic lathe Saeid 13-6 DNT SF Year of construction 1989 Adjustment of speed and cycle time by servo motor Facilities: -Pick-up device with rückw. Editing -Thread cutting gear -Waheed clear text display -pivoting control panels -PLC control etc.

Max sheet size 1300 x 1100 mm min. Sheet size 350 x 350 mm Precision +-1.5 mm Speed 6,000 sheets / hour Power 12 kW Length 12,5 m Weight 6.8 t

maximum format 1060 x 800 mm min. size 350 x 350 mm Speed 80 m / min. Paper thickness 105-500 grams Energy 101 kw Weight 8500 kg Mass 8860 x 2380 x 3000 mm

Rod lathes Thiel

Sell semiautomatic funnel Stuffer equipped with agitator. Voltage 230V. Funnel 45 liters with ClampanschluÃ? for product supply Filling volume of 15 ml 1000 ml. (depending on the filling Pistons) Option 1 - 15-250ml. Option 2 - 50 ml 1000ml. Filling quantities of 1 - 15 pieces the minute / dependent Visco and filling volume. The lifting table can option be purchased with as. You will find more machines and accessories below: ABC://ABC.resale.de/angebotelinkd-user.php?MyID=35837&dealer=1& ;order=1& or ABC://ABC.resale.de/angebotelinkd-user.php?MyID=35846&dealer=1& ;order=1& visit us also at: cbv-pack

Schuette multi spindle automatic lathe Pour SF 20-6 Curve controlled number of spindles: 6 with mechanical transmission Rod diameter: approx. 20 mm SW 17 mm AK 18 mm UK 14 mm Max bar feeder: 80 /(160) mm Independent longitudinal slide number: 6 Total / working ways (Standart): 63/40 mm "" (Special) to: 100/63 mm Number of independent cross slide: 6 Total / working ways middle and upper carriage up: 32/20 mm Lower carriage up: 40/25 mm Spindle diameter: 224 mm Main time min/max: 0.36/150 sec. Productive time min./max.: 0.45/0.80 sec. Spindle speed from / to: 900-5000 U/min 2. area: 355-2000 U/min Nominal power of the motor: 15 KW Power supply: 50 kVA The drive motor speed: 1500 rpm Length width (standard execution) 3705 1320 mm incl. Rod Guide (standard execution) 6335 mm Approximate weight without rod guide and accessories: 4.6 to. the rod gu ...

Lathe Brand: KME All information without guarantee

Swiss type CNC Manurhin KMX TWIN 207 is a double-spindle automatic machine with automatic feeding of bars. The CNC lathe was produced in 2000 in France. Technical data : - type of automatic lathe: Swiss Type - control: NUM - Swiss control - number of axles: 6 - turning diameter up to: 20 mm - diameter of passage Ø: 28 mm - number of turns: 150-8000 rpm - feed: 10/15 m / min - number of tools: 8 + 8 + 4 + 4 pcs - spindle power: 2.2 kW - tailstock: counter spindle - machine weight: 5000 kg Lathe equipment: - two main spindles / two opposite spindles - material feed with FMB Doppel-Turbo - counter spindle: 150-6000 rpm - chip conveyor - Manurhin / Schlichting-System clamps - coolant filtration

M. No.: 20051619 Basic Functions: Slit, Cross cut, Crease In-feed paper size: 210(W)x210(L) to 370(W)x520(L)mm Minimum finished size: 55(W)x45(L)mm Paper weight: 120 to 400gsm Depending on paper quality Operation: 4" Touch Screen Job memories: 263 preset jobs & 150 customized job memories. (100 MANU SET + 50 FLEX MODE) Feeding mechanism Upper belt tri-suction suction feed (Patented) Side blower Skew adjustment Side aligner Double feed detection Cut mark registration Feed tray stacking capacity: 100mm Speed 8.8 sheets / min. : SRA3 21up business card 11 sheets / min. : SRA3 8up post card 12.2 sheets / min. : SRA3 4up greeting card 15.4 sheets / min. : A4 2 cuts & 1 crease

Graham labeler COUV 128-40 with tripod, Y.O.M. 2001