calfort 5 used for sale

Portable 7-axis coordinate measuring system ROMER Infinite 1.0 SC 5028SC. Measuring range diameter: 2800mm, point repeatability: approx. +/-0.045mm - 0.050mm, volumetric length measurement uncertainty: approx. +/-0.064mm - 0.075mm, wireless communication: Wi-Fi 802.11b/g, battery operation, software base: WinRDS driver compatible with measurement software solutions PolyWorks, PC-DMIS, PowerInspect, Metrolog. Including integrated balancer, transport case, probe set 6mm, 15mm, tip, mounting plate with 3 magnets, calibration bar with calibration certificate. Inspection by appointment possible.

Transnorm conveyor belt GF 820-600-500 RA2471 Technical data: Conveyor length (NL): 820 mm frame width (NB): 600 mm, 800 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 300 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm welded again before sale Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1999 condition: good (used) Conveying length in mm: 820 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 scope of delivery: w ...

Transnorm conveyor belt GF 1200-600-500 RA2432 Technical data: Conveyor length (NL): 1200 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 330 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0.53 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1999 condition: good (used) Conveying length in mm: 1200 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Getriebemotor KW: 0,55/S1 Conveyor speed m / s: 0,53 scope of delivery: without supports an ...

Transnorm conveyor belt GF 1060-600-500 RA2472 Technical data: Conveyor length (NL): 1060 mm frame width (NB): 600 mm, 800 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 300 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm welded again before sale Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1999 condition: good (used) Conveying length in mm: 1060 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Conveyor speed m  ...

Cutting height: 125x220 mm machine weight ab.: 450 kg Motor output: 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working area: 500x300 mm work height max.: 100 mm Weight: 120 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Filter capacity: 16,3 m² Motor output: 5,5 kW : 5000 m³/h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Engine displacement: 10850 cm³ Motor power: 154 kW Top: Diesel Azmer Length 7500 mm Width 2500 mm Height 3700 mm Trek - Masses Gross Weight 16300 kg Registration weight 16300 kg Unladen weight 10890 kg Load capacity 5410 kg

Batch wet mill for the iron-free grinding of mineral suspensions. Lining (Al2O3) completely renewed in 2011. The mill and drive unit (18.5 kW bevel gear motor) are mounted ready for use on a stable base frame. Incl. sealing plug, drain tap / drain strainer and original documentation. Designed for a regrind filling of 3,900 kg and a ball filling of 3,350 kg. There are 2 identical mills available. Available for an extra charge: control cabinet incl. on-site control unit and grinding balls.

process, chiller, chiller, air-cooled, Type: TAEevo Tech 502 P3- 105 kW Refrigeration Machines, MTA S.p.A. TAEevo Tech 502P3 are air-cooled compact water chillers suitable for outdoor installation (-5°C to +46°C). Cold water temperatures adjustable from -10°C to +30°C. Including crank pan heating, phase monitoring, buffer tank 500 ltr. and built-in P3 circulation pump. chiller, chiller; Radiator Cooling capacity kW 105 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 17.9 Available pump pressure (bar) 3.42 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 55.09 Max. current (A) 93.06 Starting Current Circuit (A) 191.65 Protection class: IP54 Dimensions: Length (mm) 3298, Width (mm) 1255, Height (mm) 2119, Weight (kg) 1748 Connection Rp 2 1/2" Serial No ...

KAMAZ 53213 (KO-505A) Box: Cistern Color: orange Motor: 10850 cm³ Motor power: 154 kW Top: Diesel Dimensions Length 8300 mm Width 2500 mm Height 2830 mm Trek - Masses Gross Weight 20500 kg Registration weight 20500 kg Empty weight 10140 kg Load capacity 10360 kg

Standard equipment: - Closed machine frame with integrated laser unit - Movement unit for high-precision machining - Gantry drive in combination with linear direct drives - Closed beam guidance - Single-cutting head strategy - Cooling unit Riedel NPP from 2003 - TFT color screen - Longitudinal conveyor belt for small parts and waste - Automatic pallet changer - Work area lighting - Position laser diode - Oil spraying device - Piercline - FocusLine - NitroLine - PlasmaLine - CO2 Laser TruFlow 5000 - Maintenance-free turbo centrifugal blower - 250mm lens cutting head

Key data: 510 mm, 3000 mm, 4 St.

HOFMANN AHW 500 YOC 1991 Motor power: 4.0 kW Rated current: 9.5 A Max. planing width: 510 mm TERSA knife shaft (4-knife shaft) Integrated auxiliary stop SUVAMATIC knife shaft protection Joining strip with fastening rail Table length: 300 cm Table height: 84 cm Suction nozzle: 140 mm 4 pcs new knives Drive belt renewed The electrical system was renewed by the previous owner The machine does not have an engine brake. Transport dimensions (approx. dimensions): L: 312 cm W: 140 cm H: 115 cm Weight approx. 900 kg

BINOVA WATER RING PELLETIZER, constructed in AISI 304 stainless steel, for HDPE LDPE LLDPE PC PP PS ABS, horizontal type, throughput rate 800-1200 kg/h depending on scraps and feeding rate, Users manuals, drawings, CE., Constructed in 2003, Offered checked and reconditioned, See how we recondition [HERE](.germanplast.eu/pages/what-we-do), availability: 5 weeks time, capacity: 1.500 kg/h, conditions: reconditioned

Manufacturer: HSM Model: VK 5512 Year of Manufacture: 2018 Pressing force: 560 kN Find more here - / Contact us at -

This 3s DMG Mori Seiki NLX1500MC/500 horizontal turning machine was manufactured in 2014. It features a maximum turning diameter without interference of 366 mm, X-axis travel of 260 mm, and Z-axis travel of 590 mm. With a spindle speed of 6,000 rpm and a turret with 12 driven stations, consider the opportunity to buy this DMG Mori Seiki NLX1500MC/500 horizontal turning machine. Contact us for further details.

Spiral bevel gear machine ZFTKK 500/3V. Some of the change gears missing

This 3s SPINNER VC 560s was manufactured in 2007. It is a CNC Milling Machine featuring a 3-axis configuration, prepared for a 4th axis (included but not installed). The machine is operational and comes complete with all tooling and a tool cabinet. With a maximum spindle speed of 12,000 rpm and rapid traverse of 48 m/min, consider the opportunity to buy this SPINNER VC 560 vertical machining centre. Contact us for further details.

General SKU061H261 MakeHeraeus Hanau TypeVTR-5036 No.9004800 Year of construction1990 LocationBarneveld Main Features MaterialAluminium Volume45 Ltr. Max.temp.180 °C Specified Features - Drying oven Vacuum drying oven(1x) Max. temperature180 Degr. C. Number of compartments:1 Capacity45 Ltr Internal diameter340mm Internal depth500mm Electric heatingcheck Electric capacity1,1 KW, 230 Volt Number of doors:1 MaterialAluminium Information With switchcheck Floorspace0,6x0,7 M Total height0,5 MDrying ovensHeraeus HanauDryers > Drying ovensBrand > Heraeus Hanau What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This 5s POSmill H 500 U was manufactured in 2017. It features a Heidenhain TNC 530 control, a 60-station tool magazine, and a KESSLER rotary table with a diameter of 500 mm. The machine includes advanced systems such as automatic coolant level monitoring and a BLUM laser tool measuring system. Consider the opportunity to buy this POSmill H 500 U vertical machining centre. Contact us for further details.

General SKU234S120 MakeBühler Cobra 501 TypeSRK 440 No.10310050 Year of construction1999 LocationBarneveld Main Features MaterialStainless steel Motor55 KW Specified Features - Sand mill MaterialStainless steel Vertical sandmillcheck Housing dimensions dia. 320x900mm Inletdia. 35mm Outletdia. 35mm Motor55 kW 380/690 Volt Information With switchcheck Floorspace2,1x1,5 M Total height2,9 M Weight2650 KgSand millsBühlerMills > Sand millsBrand > Bühler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This 4s DOOSAN DNM 500II was manufactured in 2016, featuring a table size of 1200 × 540 mm and a maximum table load of 800 kg. With an X-axis travel of 1020 mm and a spindle speed of 12,000 rpm, this vertical machining center offers efficient machining capabilities. Consider the opportunity to buy this DOOSAN DNM 500II vertical machining center. Contact us for further details.

General SKU253S172 MakeBühler AG (CH) TypeCobra 201, SKR 440 No.10194572 Year of construction1990 LocationBarneveld Main Features MaterialStainless steel Motor55 KW Specified Features - Sand mill Vertical sandmillcheck Housing dimensions dia. 320x900mm Inletdia. 35mm Outletdia. 35mm Motor55 kW 380/660 volt MaterialStainless steel Information Floorspace2,1x1,1 M Total height2,7 M Weight2650 KgSand millsBühlerMills > Sand millsBrand > Bühler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This 5-axis MORI SEIKI SH8000/5AX was manufactured in 2002. Fully overhauled in 2016, it features a Fanuc 16iMA control, a spindle speed of 10,000 rpm, and a tool magazine with a capacity of 150 tools. The machine has a pallet size of 630 × 630 mm and a loading capacity of 1000 kg. If you are looking to get high quality milling capabilities consider the MORI SEIKI SH8000/5AX machine we have for sale. Contact us for more information.

General SKU356S840 LocationBarneveld MakeENCO Energie Componenten GmbH (AT) Type509 ltr Pressure Working pressure3.2 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume509 Ltr. Pressure3.2 Bar Vacuumcheck Specified Features - Pressure vessel MaterialStainless steel 1.4571 (316Ti) Notified body(Tuv) Capacity509 l Vessel sizesdia.800 x 900mm Dished bottomcheck Top connections(3x)DN50, DN80, DN100, DN125, DN200 OutletDN50 Max. temperature160°C With propellor stirrerSemix 040 Motor0,5 KW, 400Volt (EEX e II T3) Speed mixing shaft690 rpm Information No.8317/2 Year of construction1996 Mounted on legscheck Floorspace1,1x1,1 M Total height2,5 M Weight600 KgPressure vesselsEncoTanks > Pressure vesselsBrand > Enco What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any de ...

This 3-axis Mazak VCS 530C vertical machining centre was manufactured in 2014. It features a table size of 1300x550 mm, X/Y/Z travels of 1050/530/510 mm, and a maximum spindle speed of 12000 min⁻¹. The machine supports a table load up to 1200 kg and includes a 30-tool magazine with a rapid tool change time of 2.8 seconds. Consider the opportunity to buy this Mazak VCS 530C vertical machining centre. Contact us for more information about this machine.

General SKU201T021 MakeUmformtechnik Hausach GmbH Type500 ltr IBC with stirrer LocationBarneveld Pressure Working pressure0.2 Bar Main Features MaterialStainless steel Volume500 Ltr. Pressure0.2 Bar Specified Features - Vertical tank MaterialStainless steel 1.4301 (304) Closed vertical tankcheck Capacity600 ltr (nett 500 ltr) Vessel sizes900x1080 mm With covercheck Conical bottomcheck Manholedia. 40 mm Top connectionsdia. 45 mm (3x) Outletdia. 52 mm With propellor stirrercheck Motor0,55 kW 220/380 Volt Information No.105588 Year of construction1993 Floorspace1,1x0,9 m Total height1,5 m Weight150 kgVertical tanksUmformtechnikTanks > Vertical tanksBrand > Umformtechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machi ...

This 4s MORI SEIKI NHX 5000 was manufactured in 2011. It features a dual pallet system with a pallet size of 500 × 500 mm and a maximum pallet load of approximately 500 kg. The spindle speed reaches up to 12,000 rpm, with a tool magazine capacity of 40 tools. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NHX 5000 horizontal machining center we have for sale. Contact us for further details.

General SKUR0379 MakeAlpine Ultraplex LocationBarneveld Type500 UP beater plate Main Features Motor30 KW Inlet diameter450 mm Width150 mm Specified Features - Fine Impact Mill Grindercheck Grinding room sizedia. 450x150mm Inlet170x100mm Motor30 kW 380/660 Volt Speed4500 rpm Fine Impact Mills MaterialMild steel Information No.162166 Year of construction1981 Floorspace1,1x0,9 M Total height1,1 M Weight720 KgFine Impact MillsAlpineMills > Fine Impact MillsBrand > Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Circular Metal Saw manufactured in 2007. This FomIndustrie Blitz Alva 450/500 ABC features a blade diameter of 450 mm, allowing for precise miter cuts. With a tool speed of 2800 RPM, it is designed for high-speed cutting across various materials. The robust construction ensures stability and longevity, making it ideal for heavy-duty industrial environments. Consider the opportunity to buy this FomIndustrie Blitz Alva 450/500 ABC Circular Metal Saw. Contact us for further details.

This 5s TRUMPF TruBend 5085 was manufactured in 2012. It features a press force of 850 kN and a bending length of 2,210 mm, making it suitable for various bending applications. With an operating interface of Touchpoint TruBend, it offers user-friendly operation. Consider the opportunity to buy this TRUMPF TruBend 5085 press brake. Contact us for further details.

General SKU358S867 LocationBarneveld MakeGallenkamp TypeOVL 570 010J No.4A 0007 Main Features MaterialAluminium Volume29 Ltr. Max.temp.200 °C Specified Features - Drying oven MaterialAluminium Vacuum drying ovencheck Max. temperature200 degr. C Number of compartments:1 Capacity29 ltr Internal width375 Internal depth300 Internal height260 Electric heatingcheck Electric capacity0,9 kW Number of doors:1 With trays(2x) 355x275x45mm Information Year of constructionunknown With switchcheck Floorspace0,7x0,5 M Total height0,5 M Weight60 KgDrying ovensGallenkamp UkDryers > Drying ovensBrand > Gallenkamp Uk What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for ma ...

This 3s HP 580 MFG COLOR was manufactured in 2019. It features a build volume of approximately 332 × 190 × 248 mm and a printhead resolution of 1200 dpi. With a build speed of up to 1,817 cm³/hour, it utilizes PA12 nylon for full-color capabilities. If you are looking to get high-quality 3D printing capabilities, consider the HP 580 MFG COLOR machine we have for sale. Contact us for further details.

General SKU345S771 MakeGEA Westfalia Separator Industry GmbH TypeTA 40-01-506 No.1685-547 Year of construction1985/2001 LocationBarneveld Main Features MaterialStainless steel Capacity6000 Ltr./Hr. Motor11 KW Specified Features - Separator Separatorcheck Motor11 KW, 380/420 Volt InletDN25 Liquid outletDN25, DN25 Mounted on stainl. steel framecheck MaterialIncoloy 825, Stainless steel 1.4539 (904L) Information Mounted on mild steel framecheck Floorspace1,4 x 1,2 m Total height1,5 m Weight820 kgSeparatorsWestfaliaCentrifuges > SeparatorsBrand > Westfalia What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This 5-axis COSMEC CONQUEST 515/13 was manufactured in 2019. A robust CNC Wood Machining Centre, it features a working area of 6210 × 1650 mm, dual motorization on a closed gantry structure, and a spindle power up to 18 kW. It supports tool changes with multiple configurations and is compatible with ALPHACAM and ASPAN software. Consider the opportunity to buy this COSMEC CONQUEST 515/13 CNC Wood Machining Centre. Contact us for more information about this machine.

This Engel Duo 3550/550 Tech was manufactured in 1998. It features a clamping force of 5500 kN, a maximum injection volume of 1960 cm³, and a screw diameter of 80 mm. The machine dimensions are 8840 x 2520 x 2230 mm, and it weighs 20,000 kg. If you are looking to get high-quality injection moulding capabilities, consider the Engel Duo 3550/550 Tech machine we have for sale. Contact us for more information.

General SKU241S145 MakeBühler Cobra 501 LocationBarneveld TypeSRK 440 Main Features MaterialStainless steel Motor55 KW Specified Features - Sand mill Vertical sandmillcheck Housing dimensions dia. 320x900mm Inletdia. 35mm Outletdia. 35mm Motor55 kW 380/660 Volt MaterialStainless steel Information No.10208705 Year of construction1992 Floorspace2,2x1,6 M Total height2,7 M Weight2600 KgSand millsBühlerMills > Sand millsBrand > Bühler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This Engel DUO 4550/500 pico was manufactured in 2013. It features a clamping force of 5,000 kN, a screw diameter of 90 mm, and a maximum injection volume of 2,480 cm³. The machine dimensions are 7,800 x 2,405 x 2,355 mm, and it weighs 14,000 kg. Currently in production with approximately 65,000 operating hours, it remains in excellent condition. Contact us for more information about this machine.

General SKU280P459 MakeSTAWAG Chemieapparate - Anlagebau und Projectierung (CH) TypeFUNDA LRA-0.5m2 -10-300-40-400 No.WA-9256.0 Year of construction1986 LocationBarneveld Pressure Working pressure6 Bar Working pressure jacket6 Bar Main Features MaterialStainless steel Surface0.5 m2 Cake15 Ltr. Specified Features - Horizontal plate filter Plate filtercheck Filter surface0.5 m2 Number of platens10 Platen sizesdia.300mm Between the plates40mm Solids outletDN150 Liquid outletDN25 With jacket(10 Ltr) Max. temperature150 degr,C. Motor1,1 KW, (EX) Stirrer speed/filter speed 800 rpm Cake capacity15 Ltr MaterialStainless steel 1.4435 (316L) Information Total height1,7 m ATEX compatiblecheck Extra Specificationsfilter size 70 µm Horizontal plate filtersFundaFilters > Horizontal plate filtersBrand > Funda What you can expect from Foeth: -- Machine is in working cond ...

This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1600 kN, a screw diameter of 45 mm, and a servo-controlled dual-circuit pump system for precise movements. The SELOGICA direct control system with a 15-inch touchscreen enhances usability. Consider the opportunity to buy this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details.

General SKU234S124 MakeBühler Cobra 501 LocationBarneveld TypeSRK 440 Main Features MaterialStainless steel Specified Features - Sand mill Vertical sandmillcheck Housing dimensions dia. 320x900mm Inletdia. 35mm Outletdia. 35mm MaterialStainless steel Information No.10.164.371 Year of constructionunknown Floorspace2,3x1,3 M Total height2,9 M Weight2600 KgSand millsBühlerMills > Sand millsBrand > Bühler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1600 kN and a screw diameter of 45 mm, making it suitable for high-temperature thermoplastics. The SELOGICA direct control system with a 15-inch touchscreen enhances usability. Consider the opportunity to buy this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details.

General SKU234S116 MakeBühler RWK 501 TypeSRK-440 No.10226398 LocationBarneveld Main Features MaterialStainless steel Motor55 KW Specified Features - Sand mill Vertical sandmillcheck Housing dimensions dia. 320x900mm Inletdia 35mm Outletdia. 35m Motor55 kW 380 Volt MaterialStainless steel Information Floorspace2,4x1,3 M Total height2,7 M Weight2650 KgSand millsBühlerMills > Sand millsBrand > Bühler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This 3s Krauss Maffei 500-4300 CX was manufactured in 2010. It features a clamping force of 5000 kN and a maximum shot weight of 2084 g, making it suitable for high-quality injection molding applications. With a screw diameter of 90 mm and an injection pressure of 1839 bar, this machine offers robust performance. Consider the opportunity to buy this Krauss Maffei 500-4300 CX hydraulic injection moulding machine. Contact us for further details.

General SKU345S815 MakeR&M Tycon Technoglass Spa No.10887 Year of construction2004 Mounted on legscheck Pressure Working pressure3.5 Bar Vacuum possiblecheck Main Features MaterialGlass Volume576 Ltr. Pressure3.5 Bar Vacuumcheck Specified Features - Pressure vessel MaterialGlass - Enamel Notified body(TuV) Capacity500 Ltr (576 Ltr) Vessel sizesdia.1000 x646mm Dished topcheck Dished bottomcheck With covercheck Top connectionsDN100, DN80 OutletDN50 Max. temperature-30/200 degr.C. Information LocationBarneveld Floorspace1,5x1,5 m Total height1,2 M Weight750 KG CEcheckPressure vesselsTycon ItalyTanks > Pressure vesselsBrand > Tycon Italy What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands ...

Hydraulic injection moulding machine manufactured in 2003. This Krauss Maffei KM125-520C2 features a clamping force of 1250 kN and an opening stroke of 900 mm. It has a screw diameter option of 35 / 40 / 45 mm and a shot volume of approximately 156 / 204 / 258 cm³. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM125-520C2 machine we have for sale. Contact us for further details.

General SKUR1133 MakePaul Schwingel GmbH (D) LocationBarneveld Type500 ltr Pressure Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume500 Ltr. Motor6.8 KW Specified Features - Stirring vessel MaterialStainless steel 1.4571 (316Ti) Open stirring vesselcheck Capacity550 ltr (nett 500 ltr) Vessel sizesdia. 800x1100mm Dished bottomcheck Flat top sidecheck With cover700x240mm With jacket(150 ltr) Max. temperature200 degr. C With anchor stirrercheck With paddle stirrercheck Motor6,8 kW 220/380 volt (Ex) Speed mixing shaft62 rpm Information No.963340 Year of construction1997 Mounted on legscheck Floorspace1,3x1,2 M Total height3,3 M Weight900 Kg ATEX compatiblecheckStirring vesselsPaul SchwingelStirring vessels > Stirring vesselsBrand > Paul Schwingel What you can expect from Foeth: -- Machine is in working con ...

This 3-axis Arburg Allrounder 920S 5000-3200 hydraulic injection moulding machine was manufactured in 2007. It features a maximum clamping force of 5,000 kN, a screw diameter range of 70 to 90 mm, and a maximum shot weight up to 1,860 g. Consider the opportunity to buy this Arburg Allrounder 920S hydraulic injection moulding machine. Contact us for more information about this machine.

General SKU213T152 MakeAlfa Laval LocationBarneveld CEcheck TypeCHPX510TGD-15CGRX Main Features MaterialStainless steel Capacity20000 Ltr./Hr. Motor18 KW Specified Features - Separator Separatorcheck Capacity20000 Ltr./h Suitable formax. 1100 kg/m3 Motor18 kW, 400 volt (Ex) Max. rotor speed6240 rpm Mounted on stainl. steel platecheck MaterialStainless steel Information No.4131842 Year of construction2005 Mounted on mild steel platecheck Floorspace1,5x0,8 m Total height1,8 m Weight1840 kg ATEX compatiblecheck Extra SpecificationsInside drum diameter: 438 mm Proces temp.: 0/100 °C. Seperator tooling in box Max 60 discharges of solids per hour, 6-8 ltr discharge volume. SeparatorsAlfa LavalCentrifuges > SeparatorsBrand > Alfa Laval What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any ...

max. format 51 x 33 cm Year of construction 2012 Stacking delivery Palamides Alpha 500 Double benefit Automatic format recognition Waste Rejection Vibrating device Pressing station Roller table Delivery date: immediately from stock Price on request. Worldwide Delivery & Installation