calfort 5 used for sale

Technical description : DIESEL TRACTOR TRUCK - Weight 7.200 kgs - Length 3000mm - Width 1500mm - Height 2200mm - Axle interspace 1200mm - Track width 1000mm - Ground clearance 200mm

x-travel:760 mm y-travel:760 mm z-travel:760 mm total power requirement:43 kW weight of the machine ca.:11,5 t dimensions of the machine ca.:2,7 x 4,73 x 2,87 m max. table loading capacity:500 kg

Type: VLT 5000,

Manufacturer: Indramat, Type: TVM-1-2-50WO-220V, Serial number: 219200-0145-050,

Manufacturer: Siemens Netzfilter, Type: GWE-000-000-586-867, Model: 1P 6SN 1111 0AA01-2BA0, Sale without warranty: kw 16,

Manufacturer: SEW Umrichter , Type: MDS60A0220-503-4-00, Serial number: 0118772, Serial number: 8265097, Sale without warranty: 380-500 Volt, No right of return: 46 Ampere, Installation height: 0-180 Hz, Available: 31,9 KVA,

Manufacturer: SEW Umrichter, Type: MDX60A0220-503-4-00, Serial number: 8227144, Serial number: 0153577, Sale without warranty: KVA 31,9, No right of return: 46 Ampere, Installation height: 0-180 Hz,

Manufacturer: SEW Movitrac , Type: 31C014-503-4-00, Serial number: 0170982, Serial number: 8263744, Sale without warranty: 380-500 Volt, No right of return: 50-60 Hz, Installation height: 4,0 Ampere, Available: 2,8 KVA,

turning diameter:500 mm turning length:1000 mm weight of the machine ca.:7,3 t dimensions of the machine ca.:6,5 x 4,45 x 2,21 m

turning diameter:500 mm turning diameter over bed:500 mm turning dia. over base-slide:290 mm centre distance:1000 mm centre height:250 mm z-travel:1350 mm speeds:10 - 3000 U/min

weight of the machine ca.:150 kg dimensions of the machine ca.:1200 x 600 x 800 mm

cutting range for steel to:20 mm total power requirement:3~ 220 / 380 V weight of the machine ca.:100 kg dimensions of the machine ca.:500 x 750 x 1000 mm

Manufacturer: SEW Umrichter , Type: MDS 60A0220-503-4-00, Serial number: 01.1553425701.0001.04, Systemconfiguration: 08227020,

Manufacturer: Block-trafo EMI Filter , Type: HLD110 500/75 520 V AC 75A AC 50-60 Hz , Sale without warranty: UR=520 V AC, No right of return: HPF 25/085/21, Installation height: 75A AC,

Manufacturer: Esa Steuerungsdiplay, Type: VT 520G, FREE TEXT: war verbaut in Spritzmaschine Cefla,

material width:500 mm material thickness:0,2 - 3,8 mm feed length:0 - 9999,9 mm number of rolls:2 material cross-cut:128 mm² speed:60 m/min power requirement:2,0 kW dimensions (WxDxH):1,2 x 1,3 x 1,5 m roll feed:Servo control:Siemens S 7, modification 2002

Manufacturer: Bargstedt Aufstapelanlage, Type: TBH 500 , Year: 2005, Control: Bargstedt, Program: yes, Stacking device: yes, Work piece length max mm: 3000, Work piece length min mm: 280, Work piece width min-max mm: 250-1200, Min.-max. workpiece height in mm: 12-60, Stack height in mm: 1600, Number of stacks: 2, Workpiece weight/stack position in kg: 60, Outlet roller conveyor mm: yes, Cycles approx.: 15, Year :2005

Manufacturer: Bargstedt Abstapelanlage, Type: TSH 500/Q/30/12S, Year: 2005, Control: Homag, Work piece width min-max mm: 1200, Min.-max. workpiece length in mm: 280-3000, Min.-max. workpiece height in mm: 12-60, Longitudinal feeding: yes, Stacking pattern, single-row: yes, Stacking pattern, double-row: yes, Number of stacks: 2, Stack height in mm: 1600, Removal of protective boards: yes, Erection in a pit: no, Year :2005

Hersteller : Simenskarte, Type: 6 ES 5921-3WB13, Control: Siemens, Serial number: 548.226.7102,

Manufacturer: Weeke, Type: BHX 500, Year: 2007, Work piece width min-max mm: 70 - 1.000, Work piece length min-max mm: 200 - 2.500, Work piece thickness min-max mm: 4 - 80, Working range X: 2.500, Working range Y-axis: 1.000, Working range Z: 80, Vertical drilling station from below: 32, Vertical drilling station from above: 32, Drilling supports horizontal: 2, Horizontal drills-X: 2 x 8, Drill horizontal Y: 2 x 2, Number of spindles: 1.500 - 7.500, Number of spindles: 1.500 - 7.500, Year :2007

Manufacturer: Celaschi, Type: TSA 520, Year: 1987, Maschinensteuerung: max. 290, Motore Maschine 1: 150, Magazine: 150, Schrumpftunnel: 2x3, Min.-max. workpiece height in mm: 5,5, Working hight min-max mm: 5,5, Cam distance mm: 5,5, Year :1987

Manufacturer: Homag, Type: CPU Umlade-RAM 512 I/O, Serial number: 2-083-01-5004, Systemconfiguration: PC Steuerung CPU , Year: 1992, Year :1992

Manufacturer: Wagner, Type: Finisch 500, Year: ca.2005, Wasserbasierend Lacke: yes, 2K-Lacke möglich: yes, Elektr. pump: yes, Laquer reservoir litres: ca.10 Liter, Flushing circuit: yes, Movable: yes, Spray gun manufacturer: Wagner, Spraying stations: 1, Fast exchange system spray gun carrier: yes, Laquer circles: 1, Laquer system - airless: yes, Electrical power consumption kW: 2,8, Transmission ratio: 250 bar, Conveying output l/min: 5,7, Delivered checked: yes, Wight approx. kg: 52, FREE TEXT: 220 Volt/2,8 Kw/Gewicht 52 Kilo/zusätzliche Schläuche/2 Stück Sprühlanzen/ , Year :ca.2005

Manufacturer: 2 StückPerske, Type: Ritzmotor Homag FPL 526, Motor with gear: KNS 51.14-2 D, From machine: Homag Maschine, Spindle length mm: ca.60, Diameter of the spindle mm: 30, Power kW: 1,0/2,0, Volt/Hz: 50-60-120, pm: 2750/5700/3380/6920, Motor with gear: KNS 51.14-2 D, Price per unit Euro: 600, FREE TEXT: Spindeldurchmesser 30/Länge mm ca. 55 mm,

Manufacturer: Horstmann Antriebstechnik, Type: HD 541 Statomat, Serial number: 511114,

Manufacturer: Felder, Type: MG 580-1, Year: 2012, Control: yes, Min-max edge material mm: 0,4-5, Work piece width min-max mm: min. 70, Min.-max. workpiece length in mm: min. 140, Min.-max. workpiece height in mm: 8-60, Min-max feed m/min: 11, Premilling: yes, Mitre stations: yes, Weight approx. kg: 990, Year :2012

Manufacturer: SEW Movidrive , Type: MDF 60A0030-5A3-4-00, Seriennummer: 82666X, Produktionsnummer: 826080X, Frequenzumrichter: yes, Gebraucht: yes,

Manufacturer: MBusch, Type: MB LA 500, Year: ca.1997, Working widht mm: 600, Working hight mm: 80, Workstations: 4, Glue jets: 4, Schlitz und Zapfenbeleimung: yes, Pneumatical work piece clamping: yes, Fusspedal Takt: yes, Wasseranschluss zum reinigen: yes, Leimpumpe: yes, Movable: yes, Automatical glue supply: yes, Compressed air bar: 6, Year :ca.1997

Inv. Num. : 8281 Type: KTVF 55x3/1500 Producer: BC ECO TECH Created: 2010 Parameters: Capacity: 200 kg/h Maximum number of film layers: 3

General2-axis universal turning machine with - partiall hollow clamping device (hydr.) inner draw tube Ø 52 mm - C-axis and spindle brake (hydr.) - 12 stations circle revolver Sauter reception acc. VDI 30, DIN 69880-30 with tool drive Connection/drive acc. DIN 5480 Direct measuring system, glas scale in X-axis - tailstock; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTransverse stroke190 mmLongitudinal stroke525 mmClamping chuck diameter max.210 mmWork spindle (left)Spindle noseFlat flange Spindle bore73 mmDiametre of spindle nose140h5 mmSpindle diametre on front bearing100 mmMain drive 1Drive power (100% DC)13 kWSpeed range20 - 6000 rpmTorque (100% DC)171 NmC-Axis Speed-300 rpmTorque of C-Axis (holding torque)192 NmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988030 mmNumber of driven tools12 Speed max.-500 ...

General2-axis universal turning machine with - partiall hollow clamping device (hydr.) inner draw tube Ø 52 mm - C-axis and spindle brake (hydr.) - 12 stations circle revolver Sauter reception acc. VDI 30, DIN 69880-30 with tool drive Connection/drive acc. DIN 5480 Direct measuring system, glas scale in X-axis - tailstock; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTransverse stroke210 mmLongitudinal stroke525 mmClamping chuck diameter max.210 mmMain drive 1Drive power (100% DC)13 kWSpeed range20 - 6000 rpmTorque (100% DC)171 NmC-Axis Speed-300 rpmTorque of C-Axis (holding torque)192 NmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose140h5 mmSpindle bore73 mmSpindle diametre on front bearing100 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988030 mmNumber of driven tools12 Speed max.-500 ...

Technical data of the pallet rack crossbar: Shelving system: Nedcon Type: NS The scope of delivery includes: 01x Pallet rack crossbar, used Material color: blue Box profile: 130 x 50 mm Clasp: 7 HK (hooks) Clear width: 3,700 mm Max. load per pair of trusses 3,000 kg at the same weight. Distributed load 02x Locking pin, used Material colour: sendzimir galvanised For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

; Power [PS]: 68; Gross weight [kg]: 1600; Engine: Battery System: LIFePO4

Parallel Lathe CAZENEUVE type HB 575 Between points: 2000 mm Maxi Ø on bench: 575 mm Maxi Ø over saddle: 300 mm Spindle diameter: Ø 51 mm Rotation: from 20 to 1600 RPM Turret TRIPAN 411 3-jaws chuck Ø 200 mm Spindle motor: 15 CV ThreadingsMetric + Whitworth TailstockCM5 Lubricant tank Lubricant pump Supplied with 3 TRIPAN tool holders Voltage: 380 V Length: 3500 mm Width with tank: 1500 mm Total height: 1400 mm Weight: approx 3 T

; Transport weight [kg]: 840

5-axis machining center Mori Seiki NHX 5000 Year of construction 2011 (bought new in 2013) Hours10768 Processing time 7172 hours Electricity one hour 29288 With few operating hours, used only for single part to small series production, mainly for special mechanical engineering The specifications are as follows: Travels: Cylinder Ø 500 x 700 Control M730BM (Mapps2) Speed 10,0000 rpm. Tool holder SK40 DIN 69871 Tool changer 60-fold Pallet changer 2-fold Accessories: Documentation Internal cooling Knoll 50 bar Conveyor Activation to 400 tool positions Pine pallet with long zero point clamping system Lang tensioning tower approx. 100 pieces of tool holders SK40 An on-site inspection is possible at any time by appointment.

High-pressure pump for baler HSM 500.1 VL with 7.5 kW motor

Mecalux roller conveyorRoller conveyor 1950-540-450 RA1927 Make: Mecalux Roller width (RB): 450 mm, Steel rolls Nominal/outer width (NB): 540 mm length: 1950 mm Rolls diameter: 50 mm Roller distance 75 mm Overall height frame: 130 mm 2x ITOH-Deki 16936/010 24V Roller drive Conveyor speed: freely adjustable with frequency converter between 0.543 and 0.95 m/s Scope of delivery: without supports Optionally available: Supports Side guide one and both sides Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2017 Electric data: 24V ITOH-Deki condition: very good (used) Conveying length in mm: 1950 Nominal / outside width in mm: 540 Roll width in mm: 450 Roll division in mm: 75 Driven: YES scope of delivery: without supports and side guides For individual, professional advice, simply contact us. Simply contact us by phone or e- ...

Key data: 1500 KW, 1490 1/min

Siemens 1.5MW DC Motor with Watercooler incl. Simovert Masterdrive (Watercooled) Description attached

cutting width: max. 310 mm Cutting height: max. 125 mm Saw blade diameter: 500 mm Motor output: 5,5 kW SALVAMAC LEGEND 500 – The semi-automatic under-table cross-cut saw -------------------------------------------------- ----------- Maximum cutting area: 220x125/ 260x100/ 285x80/ 310x50 mm. When sawing stacked boards h max. 100 mm. The structure is made entirely of thick-walled and reinforced throughout painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cutting control in ergonomic position. Engine power of the saw motor 5.5 kW. Adjustable cutting speed via a pneumatic controller. Maximum system for weight balance and longevity. Shock absorbing system. Independent pneumatic adjustment options to adapt to different Types of processing. Durable and easily replaceable saw blade adjustment bar. HM circular saw blade, diameter 500 mm, Z ...

Technical data of the pallet rack crossbar: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: RAL 2004 orange Box profile: 80 x 50 mm Truss Type: PNB0488 Agraffe: 4 HK (hooks) Clear width: 2,500 mm Max. load per pair of trusses 1,000 kg with the same weight. Distributed load 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

A pad printing machine from Teca Print is being sold. The machine is available 3x. Price per machine. The machine can and should be viewed and tried out on site, as warranty or guarantee is excluded. Price is net Loading facilities available All information without guarantee.

CONTROLS   PLC OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 500 mm   sheet thickness max.: 4 mm   coil weight max.: 10.5 to   feedstock transport direction: right to left COIL CHAIR   coil weight max.: 10.5 to   stroke: 750 mm DECOILER   design: single reel   sheet width max.: 500 mm   sheet width (min): 150 mm   coil weight max.: 10.5 to   max. diameter of coil: 2020 mm   mandrel expansion range from: 470 mm   mandrel expansion range up to: 530 mm   feed velocity max.: 20 m/min CROP SHEAR   sheet thickness max.: 4 mm   working width max.: 530 mm   stroke rate (max.): 20 /min LEVELLER UNIT   sheet width max.: 500 mm   sheet width (min): 150 mm   sheet thickness max.: 4 mm   sheet thickness min.: 2 mm   number of leveller rolls: 9   diameter of leveller rolls: 56 mm   diameter of feed rolls: 150 mm   feed velocity max.: 20 m ...

Key data: 5000 kN, 80 mm

KM 500/2700C2 Specifications Closing page: Clamping force: 5000 kN Wooden dimension h x v: 900 x 800 mm Min. installation height: 480 mm Plate spacing max.: 1650 mm Centering: 200 mm Tool weight: 7900 kg Splash Side: Screw diameter: 80 mm Capacity: 1433 cc Spray pressure: 1829 bar Equipment: MC 4 Control Core moves: 2+2

Manufacturer: Monforts Model: RNC 500 Multi Year of Manufacture: 2007 Type of Machine: CNC Lathe MultiTurn (with driven tools) Tailstock: No Chuck: SMW / KNCS-N-315-91 Control system: 840D sl Bar capacity: max. 500mm Tool holder: Turret VDI 40 (12 pieces) Spindle operating time: approx. 18,000 hours Find more here - / Contact us at -

Heber conveyor belt GF 34500-600-500 RA2241 Technical data: Conveyor length (NL): 34500 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, RF63DT90L4 Electrical data: 50Hz V380-500, kW 1,5 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 34500 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralan ...

Manufacturer: Monforts Model: RNC 500 Single Year of Manufacture: 2008 Type of Machine: CNC Lathe SingleTurn (without driven tools) Tailstock: No Chuck: SMW / KNCS-N-315-91 Control: 840D sl Bar capacity: max. 500 mm Tool holder: Disc turret VDI 40 (12 positions) Spindle run time: approx. 18,000 hours Find more here - / Contact us at -

Technical data of the pallet rack crossbar: Shelving system: Dexion Type: Speedlock P90 The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: sendzimir galvanised Box profile: 130 x 50 mm Truss Type: SLB Agraffe: 5 HK Clear width: 3,500 mm Max. load per pair of trusses 2,500 kg, with the same weight. Distributed load 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

dishwasher for dishes, Electrolux ELE 506065 type EPPWEASMS, 400 V, 13.5 kW BJ 2018, basket size 50×50 cm, automatic lowering and raising of the hood, 3 washing programs and 1 x continuous washing, self-cleaning cycle, digital display, electrical preparation for automatic washing Washing-up liquid – rinse aid dispenser, original price €17286.00 Dimensions 83x89x176 cm, minus 35% discount