calfort 5 used for sale

CMA 5-axis painting robot mod. ROBY 5EX-R - used - N. 5 controlled axes - N. 3 supports - Wrist capacity 3 kg - Self-learning programming -Merry-go-round Number of arms 3 Single arm capacity 25 kg - Workpiece Wheel Servo movement controlled and synchronized - Complete with manual and CE declaration - RETROFIT 2024 (NEW OVERHAUL)

Transnorm belt conveyor GF 3990-700-600 RA2069 Technical data: Conveyor length (NL): 3990 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 300 mm with motor support feet: optional Conveying speed (v m/s): 0,67 Drive: SEW gear motor R17 DT71D4/TH Electrical data: 50Hz V380-500, kW 0,37 S1 drive drum: Ø = 81 mm belt return roller: Ø = 81 mm Year of manufacture: 2014 Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Customize length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 3990 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Ampere: ...

Internal micrometer screws, micrometer screw, inner diameter, internal fine measuring instrument, cylinder gauge, -Handover: in its current condition as inspected -Condition: incomplete, see pictures -Measuring range: -150 mm -Dimensions: 280/450/H60 mm -Weight 2 kg

Reference Num.: 3478 Brand: Ryobi Type: 512 Construction year: 1996 Impressions: 55 mio Size: 520 x 365 mm Available: directly Status: In production Location: Deutschland Sheet size: min 100 x 150 mm, max 520 x 365 mm Printing speed: max 11,000 sheets/hour Printing units: 2 Paper thickness: 18.11 mm Machine size: Length: 2,215 mm, Width: 1,561 mm, Height: 1,598 mm Total weight: kg 2,200 / lbs 4,850 Equipment: - Crestline Filmfeuchtwerk

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Tool cabinet: Steel cabinet with 2 shelves -Width: 505 mm -Depth: 505 mm -Height: 870 mm -Door: lockable, without lock -Weight: 28 kg

Simatic panel, operator panel, machine control, interface panel, control panel, operating unit, control panel -Manufacturer: SIEMENS, Operator Panel OP20/240-8 -Type:6AV6 542-0BB15-2AX0 -Dimension: 250/235/H45 mm -Weight: 1.1 kg

Industrial Ethernet Switch, Network Switch, Lan Switch, Rail Switch, FL Switch -Manufacturer: Phoenix Contact, FL Switch Industrial Ethernet Switch -Type: SFN 5TX -Order No.: 2891152 -Voltage: 24VDC -Dimensions: 130/75/H30 mm -Weight: 0.3 kg

sheet width: 2040 mm plate thickness: 3,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 2,30 t dimensions of the machine ca.: m Manual back stop up to 500 mm Side stop and table extensions Knives sharpened The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Transnorm Rising falling Incline belt conveyor GF 7750-600-500 RA2054 Technical data: Conveyor length (NL): 7750 mm (4150 mm + 3600 mm) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R32DT71D4BMG Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 7750 Nominal / outs ...

Frequency converter, frequency inverter, drive converter, controller, variable speed drive -Input: 3x 380..500 V~ -10% 6% 50/60 HZ -Output: 3x (0-220/240) V~ 0..180 Hz 9.5A~ 400V -Dimensions: 100/340/H270mm -Weight: 4.7kg

Interface converter, converter, module converter, FL Comserver, interface converter, interface converter, interface converter, -Manufacturer: RSF, Converter -Type: ZEV 5 Ord.-No. 14 369 519 -Number: 3x converter available -Price per piece -Dimension: 230/60/H35 mm -Weight: 0.3 kg/pc.

Lippert belt conveyor GF 3220-650-500 RA1466 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 3220 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 64 mm Drive drum (AT): Ø = 81 mm Belt: Type SNB-8E Year of construction: 20 ...

arm length: 5000 mm weight max. in kg: 500 kg swivelling range: Grad height: 3800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Lifting height 3800 mm Crane number 1.35 The techn. Information is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to prior sale, Our terms of sale apply exclusively. About us More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70 t More than 1000 items Accessories for your workshop If you want to sell machines, systems or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We offer for sale our Trumatic 5000R laser punching press. The machine is used and in very good condition. Basic data from the nameplate: Max cutting force: 220 kN Type 9121 No. 090038 Year of manufacture: 2001, spare parts Network: 400 V/50 Hz Connected load: 29kVA Supply voltage: 400V Ujznvnkmpx Control voltage: 24V= Necessary protection: 3x50A Compressed air connection: 7-14 bar Machine weight: 17500kg Main features of the machine: - Tool rail - 21 tools and 4 handles - Work surface 3070x1660mm - Max. sheet thickness 8mm - Axis of rotation of the tool head C1 and C2 - Form function - Thread function - Multibend function - Pneumatic press - Automatic sliding of details 500x500mm - Water-cooled servo motors Additional equipment of the machine: -Light barrier Softpunch function - Details of the slide sensor - Device for blowing out small details - Chi ...

Key data: 1300 KW, 400 V

Siemens Biogas generator with heat coupling. Brand; Siemens Type; SG-56HM Fuel; Biogas YoM; 2019 Hours; 38.000 (Total overhauled at 36.200h) Voltage; 400V RPM; 1500RPM Freq; 50Hz Can be delivered with Heat exchange platform, exhaust gas cooler, remote control cabinet, roofhoods, GCB panel, Tranformator, GCS control cabinet, gas pretreatment, gasfans, drycoolers (LT & HT) Direct available! Jenbacher,MWM,MAN,MTU,Guascor,Perkins,Cummins, Siemens, CHP, Power generator, Biogas , Waukesha

throat: - mm tool adaptor: - power requirement: - kW weight of the machine ca.: 70 kg dimensions of the machine ca.: ? m Articulated spindle drill head with 8 spindles Maximum pitch circle diameter 200 mm, Minimum spindle distance 41 mm, Height connecting flange/spindle end : 570 mm, Gear ratio 1:2, Weight approx. 70 kg Drilling capacity 22 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear motor, electric motor, electric gear motor, bevel gear motor -Manufacturer: Nord, geared motor with brake -Type: SK 530SU-80S/4BRE8 -Speed: 93 rpm -Power: 0.55 kW / 1380 rpm -Shaft: Ø 25 x 45 mm -Protection class: IP54 -Brake: 8 Nm -Dimensions: 435/200/H240 mm -Weight: 21 kg

Workbench, work table, assembly bench -Workbench: with drawers, solid construction -Width: 1255mm -Depth: 700mm -Height: 880mm -Drawers/cabinet doors: each 2x, lockable/without lock/key, see photos -Weight: 98 kg

Pressure press FAG TP-510, machine number 10461, complete, electric drive motor, in good condition, immediately available We have 9 more pressure presses in stock. Please send us an inquiry. If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Powder curing furnace 3,500 x 1,900 x 2,000 mm electric 1 Inner dimension length 3,500 mm 2 Inner dimensions width 1,900 mm 3 Internal dimensions height 2,000 mm 4 Substructure 1 set of steel profile 5 walls 1 set of galvanized sheets 1mm on both sides, RAL on the outside 6 Insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m² 7 Bottom furnace gets 2 entry rails for tray wagons 8 Temperature 220°C 9 fans 1 pc. 7,500 m³/h 10 electric motors 1 pc 3 kW , 1450 rpm, 3 F, 50 Hz 11 Thermal power 58 kW 12 hinged doors on one side 2 pcs insulated with rock wool 150mm 75Kg/m² Heating Indirectly via Thermoblock 13 Thermoblock 1 set stainless steel INOX AISI 316 heater electric heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection 14 burners 1 pc stove is electrically heated 15 Exhaust air 1 pc device for exhaust air pipe, manual flap ...

Crankcase for MWM RHS 518 A, 8 cylinders for sale. Housing is in very good, used condition, see detail photo. Previously used as an emergency power generator with few operating hours. Part Number: 26.01-82/04 26.01-82/34 E 26.100-142/04 26.100-142/34 E

Powder curing furnace 3,500 x 1,900 x 2,000 mm gas operation 1 Inner dimension length 3,500 mm 2 Inner dimensions width 1,900 mm 3 Internal dimensions height 2,000 mm 4 Substructure 1 set of steel profile 5 walls 1 set of galvanized sheets 1mm on both sides, RAL on the outside 6 Insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m² 7 Bottom furnace gets 2 entry rails for tray wagons 8 Temperature 220°C 9 fans 1 pc. 7,500 m³/h 10 electric motors 1 pc 3 kW , 1450 rpm, 3 F, 50 Hz 11 Thermal output 58 kW = 49,880 kcal/hour 12 hinged doors on one side 2 pcs insulated with rock wool 150mm 75Kg/m² Heating Indirectly via Thermoblock 13 Thermoblock 1 set of stainless steel INOX with heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection 14 burners 1 pc. stove is heated by gas burner. 15 Exhaust air 1 pc device for exhaust air pipe, m ...

Powder curing furnace 4,500 x 1,900 x 2,000 mm electric 1 Inner dimension length 4,500 mm 2 Inner dimensions width 1,900 mm 3 Internal dimensions height 2,000 mm 4 Substructure 1 set of steel profile 5 walls 1 set of galvanized sheets 1mm on both sides, RAL on the outside 6 Insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m² 7 Bottom furnace gets 2 entry rails for tray wagons 8 Temperature 220°C 9 fans 2 pcs. 2x 5,700 = 11,400 m³/h 10 electric motors 2 pcs 2x 2.2 kW , 1450 rpm, 3 F, 50 Hz 11 Thermal power 74 kW 12 hinged doors on one side 2 pcs insulated with rock wool 150mm 75Kg/m² Heating Indirectly via Thermoblock 13 Thermoblock 1 set stainless steel INOX AISI 316 heater electric heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection 14 burners 1 pc stove is electrically heated 15 Exhaust air 1 pc device for exhaust air ...

table diameter: 500 mm table load: 0,4 t table height: 160 mm total power requirement: 0 kW weight of the machine ca.: 0,18 t dimensions of the machine ca.: 0,70,80,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Power supply, converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, dual power supply -Manufacturer: Phoenix Contact power supply Quint Power -Type: Quint-PS-3x400-500AC/24DC/10 -Order No.: 2938617 -Dimension: 130/85/H130 mm -Weight: 1.1 kg

hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Kramp, hydraulic unit -Motor: Type EM100LB4-B14-500 3.0 kW / 1400 rpm -Individual components: see photos -Dimensions: 710/350/H340 mm -Weight: 53.1 kg

Faceplate, faceplate chuck, four-jaw chuck, facing chuck -Face plate: Chuck size Ø 560 mm -Bolt circle: Ø 235 mm -Groove width: 22 mm -Through hole: Ø 140 mm -Intake: short taper 11 -Weight: 109 kg

drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker, metal cabinet -Tool cabinet: steel cabinet with intermediate shelf -Width: 1055 mm -Depth: 510 mm -Height: 725 mm -Door: lockable, without key -Number: 1x cabinet available -Price: per piece -Weight: 48 kg

Roller conveyor, conveyor track, roller conveyor belt, roller track -Handover: in current condition as seen -Conveyor rollers: 1 piece is missing, see photos -Roller conveyor: not powered -Roll width: 740 mm -Diameter roll: 90 mm -Center distance: 610 mm -Total dimensions: 6020/960/H845 mm -Weight: 400 kg

Variator Pulley, Vario Adjustment Pulley, Vario Belt Pulley, PIV Gear, Vario Gear, Variable Speed Pulley, Variable Pulley, Expansion Pulley, V-Belt Pulley Adjustable -Manufacturer: VEB, Vario belt pulley type E 502.22 -Outer pulley diameter: 220 mm -Inner diameter: 22 mm -Dimensions: Ø220 x 140 mm -Weight: 5.4 kg

Control card, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit card, valve amplifier, valve control, prop. amplifier -Manufacturer: Rexroth, Prop. Amplifier -Type: VT 5004 -PCB: VT 3002 -Dimensions: 200/60/H140 mm -Weight: 0.4 kg

Gear, gears, spur gear, spur gear -Manufacturer: PTI, gear, spur gear module 5 18 teeth -Type: M5 Z18 -Shaft holder: I pilot hole Ø 20 mm -Tooth width: 50 mm -Quantity: 2x gear available -Price per piece -Total dimensions: Ø 100 x 75 mm -Weight: 3.0 kg/pc.

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders, compact cylinders -Manufacturer: Festo, compact cylinder type ADNGF-25-50-PA 554236 -Stroke: 50mm -Piston: Ø 25 mm -Piston rod: Ø 10 mm -Quantity: 1x cylinder available -Dimension: 105/40/H40 mm -Weight 0.3 kg

Sensor, probe, immersion probe, float switch, magnetic switch, magnetic float switch, level switch, magnetic lock switch -Manufacturer: Igema, magnetic lock switch -Type: M 510-60 -Voltage: 6-230V AC / 6-42V DC -Quantity: 2x switches available -Price per piece -Dimensions: 110/50/H170 mm -Weight: 0.4 kg

Servo motor, electric motor, DC motor, stepper motor -Manufacturer: Berger Lahr, stepper motor servo motor -Type: RDM 599/50 -Shaft: Ø 10 x 30 mm -Dimensions: 130/85/H85 mm -Weight: 2.5 kg

Hydraulic pump, hydraulic unit, hydraulic container, hydraulic tank -Manufacturer: Safan, hydraulic container from press brake type UC 110-3100 -Level indicator: sight glass -Total dimensions: 1950/540/H485 mm -Weight: 69 kg

Printing pad, printing pad for pad printing machine -Manufacturer: Teca-Print, printing pad for pad printing machine -Type: 597 Ø 165 mm -Receptacle: M16 -Quantity: 3x printing pads available -Price per piece -Total dimensions: Ø 165 x 150 mm -Weight: 1.7kg/piece

Builder: DOPPSTADT Model: AK 550 MEGA Engine: MERCEDES BENZ 317 kW (425 HP) Data: L. 9.200 mm x W. 2.500 mm x H. 2.950 mm (NO DISCHARGE BELT) Year: 1994 Hourly Production: 140 m³/h Shredding System: 36 HAMMER Fuel Tank: 300 L Weight: 21.000 kg

Faceplate, faceplate chuck, four-jaw chuck, facing chuck -Face plate: chuck size Ø 500 mm -Receptacle: short cone 8 (Ø 136-139 mm) -Hole circle: Ø 172 mm -Through hole: Ø 80 mm -Groove width: 20 mm -Weight: 86 kg

Steel pipes, flushing pipes -Diameter: 508 mm -Wall thickness: 8.8 mm -Length: 4,400 mm -Weight: 108 kg/m

Roller conveyor, conveyor track, roller conveyor support, conveyor track support, support -Support: Adjustable support for roller conveyors or similar -Height: 535 to 820 mm -Width: 480mm -Quantity: 33x supports available -Price per piece -Transport dimensions: 480/130/H535 mm -Weight: 5.5 kg/pc.

capacity 90 degrees: round: 500 mm capacity 90 degrees: square: 420 mm : 600x400 saw band length: 5320x34x1,1 mm band speed: 15 - 100 m/min table height: 805 mm total power requirement: 3,0 kW weight of the machine ca.: 1,45 t dimensions of the machine ca.: 1,72 x 2,5 x 2,5 m Double miter band saw, hydraulic semi-automatic, DGS 500/600 HA-I • miter left + right 60° • Frequency-controlled saw drive • 34 mm saw band height • Wear-free material support turntable, ball-bearing • To position the saw blade guides using a very wide linear guide • Strong, robust gearbox • Large chipboards • 2 integrated support rollers left and right • Removable chip tray (disinfection) • Free-standing control panel, safe and ergonomic • Storage space for tapes, consumables • Hydraulic cutting pressure control valve • Material height sensor (automatic cut start detection) • Preload s ...

Year of manufacture 1997 Foil Packing Machine Angle welding machine Manual installation Shrink tunnel Mobile substructure Price on request. We deliver and install worldwide!

Tool trolley, workshop trolley, mobile workshop trolley, drawer cabinet, trolley -Workshop trolley: stable tool trolley -4 drawers: lockable, see photos for layout -Contents: 25 tool carriers HSK A63/B80 -Total dimensions: 885/555/H995 mm -Weight: 101kg

Vernier caliper, caliper, vernier caliper -Manufacturer: Holex, digital caliper -Art.No.: 41 5528 800 -Measuring range: 0-300 mm -Measurement accuracy: 0.01 mm -Quantity: 1x calipers available -Dimension case: 1060/280/H50 mm -Weight: 3,3 kg.

M. No.: 6386927 Format (cm): 55 Equipment / Additional information: Side tables, safety barriers, 1xreserve knife Hydraulic precision drives for knives and press beams Continuously adjustable pressing pressure with display 99 memory programs with up to 99 steps

Transnorm belt curve conveyor right GKF 90°-700-500-IR450 - NEW RA2312 Technical data: Frame width (NB): 700 mm Frame width with Bearing cover and motor: 900 mm belt width (GuB): 500 mm height (BH): 220 mm height with motor (MH): 350 mm Inner radius (IR): 450 mm Conveying angle: 90° degrees Conveying speed (v m/s): 0,67m/s Drive: SEW motor motor Electrical data: 50Hz V380-500, kW 0,55 / S1 Year of construction: 2020 Optionally available: Supports Sideguides Sideguides Frequency converter for stepples speed controll Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstreet 11 B & C, 97076 Würzburg Features: Construction year: 2020 condition: new Nominal / inner radius in mm: 450 Nominal / outside width in mm: 700 Belt width in mm: 500 angle: 90° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive KW: 0,55/S1 Conveyor speed m / s: 0,67 scope of d ...

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker, clothes/laundry locker -Steel locker: double-doored, compartment width 30 cm -Width: 600 mm -Depth: 500 mm -Height: 1855 mm -Doors: lockable, without lock -Number: 1x locker available -Weight: 38 kg

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker, clothes locker -Steel locker: three-winged, compartment width 30 cm -Width: 900mm -Depth: 500 mm -Height: 1840mm -Doors: lockable, without lock -Number: 1x locker available -Weight: 56 kg

WITH BASE CABINET Ser. No.: 12075 Book format: 320 x 220 mm (Max. 320 x 300 mm) Cover format: Cover size: 330 x 480 mm (Max. 330 x 680 mm) Book thickness: 2 - 50 mm Cycle speed: up to 300 cycles per hour Heat-up time: 30 - 40 minutes Equipment / Additional information: Adhesive: Planamelt R 1323-2