cake line used for sale

PVS 125Hui or PVS 150 Hui drive 15 or 22 KW cutting kit or emulsifying module in 125 or 150 mm size available Dre PVS Hui is 125 or 150 an Inotec with an emulsifying module to an equally moderate consistency and ensure smoothness of various products and Proruzieren such as: Paste soup ketchup Mayonnaise Pesto ointments Smoties bread on strokes nut creams and other products

Used Puff Pastry Make-Up Line TROMP, Type: 180.01.011 -Reconditioned- - Table length overall: 7.900 mm - Conveyor belt width: 650 mm - complete with guillotine and filling depositor Condition: Very Good, reconditioned The line is in a very good condition and ready for operation. Inspection and test run are possible at any time.

Mak 6M20 Liner Very Good Condition for sale

Laminating line for pizza dough consisting of: Laminating line for pizza dough, consisting of: Extruder 3 x pressure roller Cross roller Calibrating unit Folding station 2. folding station Satellite head Flour shakers Cross roller Cutting station Transfer paper Manual rewinding

see picture for data. Table hoehen-adjustable. mass approx.: 1.55 x 0.8 x 2.1 m high

As good as new.

Aggregate screening line. Year of production (installation) - 2004 Installation capacity - 4 t / h Grain size of the screened material 0 - 6mm The line includes: 1. Storage silo - 20 tons 2. Raw material hopper 3. Vertical bucket conveyor PK-250-200 / 9200 - manufacturer WAKRO Sp. Z o.o 4. Vertical bucket conveyor PK-250-200 / 8000 - manufacturer WAKRO Sp. Z o.o 5. PKS-200/4200 screw conveyor - manufacturer WAKRO Sp. Z o.o 6. PKS-200/2800 screw conveyor - manufacturer WAKRO Sp. Z o.o 7. PKS-250/2515 screw conveyor - manufacturer WAKRO Sp. Z o.o 8. PKS-250/5300 screw conveyor - manufacturer WAKRO Sp. Z o.o 9. Ball mill 10. Air filter FPK-23/25 - manufacturer WAKRO Sp.z o.o 11. The PWL2-1 / 2,2-Ew2 linear vibrating screen - producer NOWET Sp.z o.o

Travel distance 3350 mm ; Very good

ROBOSTAR Model: RBC-11NSA engine: HC FS23 (M). PWR 200 W. Verhaeltnis: 10 Max RPM. 3000 / min Laenge: 900 mm; ready for use

Robostar M odel: RBC-11NSA Engine: HC (M) 200 W FS23 ratio: 10 Max RPM. 3000/min Length: 900 mm; ready for operation

Model: RBC-R Engine: HC-K (M) 100 W FS13. Ratio: 20 Ford. 3000/min Lenght: 430 m; ready for operation

RBC Robostar 32NSA lROBOSTAR Modell: RBC 32NSA Motor: MS Pwr 200W Verhaeltnis: 10 Max RPM. 3000 / min Laenge: 570mm; ready for operation

Qty. 1 Second-hand aluminium complete log casting line Mfc.: GAUTSCHI & SISTEM TEKNIK & ASSIMAKIS Built: 1990’s Refurbished in 2014 Capacity: 75 T/day 22 000 T/annum Log dia.: 7” & 8” Log length: 7 m Requested area: approx. 80 x 25 m 1500 – 2000 m²

Robostar Model: RBC-R Engine: 200W MS (BK) ratio: 10 Max RPM. 3000/min Length: 470 mm; ready for operation

Neri/Marchesini/Garvens/Multipack labelling & packing line for round plastic bottles consisting of: Bottle infeed table, Neri SL 400 self-adhesive labelling machine for bottles, etc., suitable for containers with a diameter from 15 to 80 mm, label height from 10 to 120 mm, conveyor width 80 mm, capacity up to 220 bottles per minute, bottle outfeed table used as a buffer, Cognex camera inspection of the print of the variable data (batch no., expiry date, etc.) on the labels, Marchesini MA155 horizontal cartoner, continuous motion, carton size range: A: 25 – 100 mm, B: 15 – 85 mm, H: 65 – 190 mm, capacity up to 140 cartons per minute, GUK leaflet folder from stack, bar code reader for leaflet, carton and presence of leaflet in the carton, Garvens S2 inline checkweigher with reject device and reject container, weighing range up to 300g, Multipack F40 collator & stretch bander for car ...

Robostar Model: RBC-71NSA Motor: HC-K (M) FS73 Power: 750W Ration: 10 Max RPM: 3000/min Length: 810 mm; ready for operation

New liners

Barrel filling line complete (new Waagevon Bizerba, control panel and filler neck Bedieteil Bizerba iS30 Scales Bizerba type 2000/4000 VE-L 2250 piece barrel bag (new) with 3500 piece barrel bag sealers (new) NETZSCH with dosing unit BJ. 1983 with 80 piece barrels with lids and 80m EW pallets

crimped mesh loom: working range: max. 3.000 mm wire diameter range: 2,0 - 7,0 mm mesh width: 8,0 - 100 mm crimping machine: wire diameter range: 1,5 - 7,0 mm wire feeding speed: max. 28 mtr./min; ready for operation

Hard PVC pipe extrusion plant for tubes D28/D30/D33, consisting of: Battenfeldextruder B45-24 d, ESDE tube crosshead K 010, vacuum calibration with water bath, Graewe-band trigger BA63, Graewe Abstech-and at chamfer machine STS50, various sleeves, cores, calibrations and jaws, as well as additional tube crosshead Battenfeld RS 8-40

After cooking stove, thermal oil, Formcook, frying line (CFS, GEA, Koppens, Alco, Stork) - continuous grilling line - Total length outside: 6 m - Total width: approx. 1.300 mm - Height of the gallows: 1.200 mm - Gallows for chain hoist - 5 floors above each other - Conveyor belt of wire belt: 600 / 2,35 / 7 / 12,7 - Double-walled floor and hood, isolated

RECON Part number: 9.1110-007 - with old GL stamping - Price depending on measurement between 800€ and 1400€ ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

We provide the following to the purchase : Itemnumber: 12576 Working Line inkl. Meiko Systems Good for Hostital, retirement home, sanatoriums for more information please contact us. please keep the item number ready Shipping costs pls contact us; Second Hand

Stainless steel cooking line Kitchen Cup block kuechenline; Stainless steel cooking line Kitchen line Kitchen block Kitchen line 4-flame stainless steel Gas stove with oven stainless steel countertop Spuele with single-lever mixing battery 5 x shelf 1 x drawer 1 x 230V socket Stainless steel socket mass approx. (HxBxT)68x265x65cm Component of this auction is one of the two picture shipping costs, please ask us. Other items can be found in our shop.

Product number: 1163 Mixer: 2AM1000L-92-08624 Speed: 2 speeds, 20/40RPM Power: 3 x 380V, 50Hz, 13kW Dimensions: 2400 x 1300 x 2950 mm Including lifter for 200L bins Meat pomp: 250-120V1700 Diameter screw: 250 mm Hopper: 1700 litres Dimensions: 1400 x 2500 x 2600 mm Including Baktec-matic water dosing Grinder: 300 mm hole plates Dimensions: 1200 x 800 x 2300 mm

Ultra fine classifying line for end finenesses up to 3 micron, consisting of: Feeding unit, Acucut Mikro air classifier C-24, dust filter Bühler PGFG 60/18 (39 m² filtering surface, shock pressure proof, without blower), several tubes and switchgear cabinet. Prior use: Toner production (capacity: 200 - 600 kg/h). Line revised in 1993, regularly maintained.

Automatic bagging line for open bags up to 50 kg, consisting of: Bag magazine with loader, filling station with scale Vollenda, bag belt, sewing machine Union Special and switchgear cabinet with SIEMENS S5 PLC. Prior use: Bagging animal food.

IMA-PG TR100 blister machine for tablets and capsules in PVC/Alu blisters, output up to 140 blisters per minute. Blister size range from 30 x 60mm up to 128 x 150mm, and up to 12mm deep, currently fitted with tooling for blisters 60 x 140mm. With Laetus checking system. With Multipack F42 blister stacker & stretch bander, up to 40 stacks per minute.

Qty. 1 Second-hand aluminium foil rolling mill line Mfc.: Kyongil Machinery Built: 2003 Stopped: 2015 Type: 4-Hi Strip width: 850 mm Thickness Entry: 0.3 mm Exit: 12 microns Consist of: Foil rolling mill Foil separator Doubler Annealing furnace

Qty. 1 Second-hand Powder coil coating line on aluminium strip 1500 mm wide Mfc.: TBA Built: 1991 Coating thickness: 60 microns Revamped by OTEFAL in 2003 Powder booth changed in 2011 – GEMA Coil coater for the pre-treatment changed in 2013 Degreasing section re-built in 2010 – OTEFAL Electrical device changed in 2006 Strip width: 800 - 1500 mm Strip thickness: 0.8 – 2.0 mm A wide range of colors - over 300 different shades Capacity: 9000 tons/year in 3 shifts work 5/7 Days so 2 000 000 m² Spool dia.: 508 or 610 mm Outside coil dia.: 1500 mm Average speed: 7.5 m/min.

Gabion Mesh Production Line HEBEI ANPING WIRE MESH MACHINE FAKTORY 60X80 / 4300 was built in 2013. Machine for the production of hexagonal gabion mesh with the following parameters: - manufacturer: Hebei Anping Wire Mesh Machine Faktory (China) - mesh size: 60 x 80 mm or 60 x 100 mm - maximum width of the produced mesh: 4300 mm - wire diameter: 2.0-2.8 mm - capacity: up to 2.5 m / min - machine weight: 18 tons - engine power: 22 kW

<b>Properties</b> Used pallet roller conveyor of the manufacturer of rack & roll GmbH Condition: Excellent condition with light wear Color: Silver Feet must be ordered separately Expertly disassembled and packed Pre-assembled on a length of 2,640 mm Including a drag reel per item Price per meter <b>Technical data Pallet roller conveyor dimensions approx.</b> Total length of an element: 2,640 mm Total width: 930 mm <b>Mass of the rollers and the frame about</b> Clamping length approx.: 835 mm Diameter approx.: 60mm Distance approx.: 150mm Material: Steel, galvanised Frame: 80x40mm Brake pulley diameter: 90 mm In stock: 140 metres <b>Pallet roller conveyor</b> Thanks to the superb craftsmanship of the pallet roller conveyor glides your material, even under high load, gently to the place of destination.  ...

For sale complete aerosol cans line.

Calender with stretching line Roll width: 450 mm Diameter of roller: 252 mm Stretching line length: 2500 mm incl. 4 GWK temperature control units, 12 kW heating capacity

Qty 1 x Berstorff 4 roll inverted L calender, serial number: 11892-907, original year 1966 (but upgraded/refurbished in 2012), Roll sizes: 850mm dia x 2440mm wide, peripherally drilled rolls (steam/high pressure hot water heating), motorised nip adjustment, cross axis, roll bending, hydraulic preload etc. 2 speed Unidrive gearbox on universal couplings, Speed setting 1: 33.7 rpm, speed setting 2: 16.85 rpm, with 98kW DC variable speed motor fitted to each roll. Operator controls renewed recently (Siemens S7 plc) Downstream equipment: Set of 5 x cooling drums Beta thickness measuring device Edge trimming unit Menzel length cutter 3 position winder Complete and in very good condition. 2 spare rolls.

Aseptic sterilizator Volume: 100 l

1 aseptically filling Elo-Pak line suitable for ESL milk and fruit juice Int. Designation: new hall composed of: a.) 1 aseptically filling Elo-Pak filling machine Int. No. II 103 built by Fa: Shikoku Type: U-980 A Serial No. 455 Year of construction 2007 with 3 format options, 0.33, 0.5 and 1.0 l Output: 11,000 U/h for fruit juice in use in operation until the end of January 2019. The following annexes to the Elopak line are: 3 rows of individual packaging transport lanes from polycetting, length to Meuerer carton packing system approx. 23 m with curves 3 Elopak ceiling stackers Year of construction 2004; with screw cap magazine with Yet stream transport railways into the 3 lid storage containers 1 carton pack vending machine for 6 units in the box, partially open at the top Type: Ba-6-30; Serial No. 50325-210 Manufacturer: Meurer Year of construc ...

Feeder Double printing Crabtree Marquess UV oven Maber Coater Oven of 27 m and 6 m of coolers New PLC control for machine Chain and wickets new New exit table Inghor New transition system Non stop stacker LTG Sizes 1140 x 960 mm.

2 Coilhaken 1 x 9 t 1 x 1 t

3-spindle line boring machine

Complete line of pastabox: •Formage box •Thermoformage inner bag •Remplissage pasta •Remplissages sauce •Operculage

Product number: 2397P Weber slicer Type: CCS904 Serial number: 7096 Year of construction: 2007 Capacity: 2000 RPM Slice thickness: 0.5 - 50 mm Compressed air: 10 Bar, 150 L/min. Power: 3 x 400V, 50Hz, 10 kW Dimensions: 13400 x 1900 x 2600 mm Including CCW904 weigher, CCR904 rocker, CCA speedloader and CCU portioning unit Multivac thermoformer Type: R530 Serienummer: 115612 Year of construction: 2007 Film width: 560 mm Index: 1200 mm Dye: 3.5 Power: 3 x 400V, 50Hz, 36.5kW Dimensions: 14850 x 1300 x 2450 mm Hard film machine for vacuum and gas flush Pago labeler Type: System 516 Serial number: 212516068 Year of construction: 2012 Mettler Toledo metaldetector and checkweigher Type: XS3 Serial number: 35000430 Year of construction: 2008 With reject Mettler Toledo X-ray machine Type: Safeline R20 Serial number: 3113R20V3268 Year of construction: 2013 ...

Stock - No.: 2166 1 used, in 2019 partly overhauled and tested film/foil/regrind pelletizing extrusion line EREMA type RGA 50 T equipped with: 1. cutter / densifier unit, new motor with 18,5 kW tangential ( T ) cutter - Ø 550 mm 2. Extruder single-screw Ø 50 mm – 20 LD motor 18,5 kW – NEW Frequency Converter 3. screen pack changer sieve- Ø90 mm with hydraulic unit-new 4. watering-granulation unit HG, pelletizer drive 0,75 kW 5. pellet drying vibrating dewatering unit GS 1000/200 6. control board ( new converter ) The line is ready for operation, date shortly in our workhsop Wuppertal-Germany. More regranulation-pelletizing lines ex stock available, ask for our actual machine-list or visit us

CHEESE PORTION CUTTING MACHINE SLICING MACHINE AGED CHEESES GOUDA, EDAM, MIMOLETTE, CHEDDAR AND MANY KINDS WITH PLC CONTROL AND HMI OPERATOR PANEL COMPLETE STAINLESS STEEL THICKNESS IS ADJUSTABLE

Nr. 03 SINGLE-OVITE EXTRUDERS DIAMETER 100 Nr. 01 HEAD CONSTRUCTION 2 LAYERS

After cooking stove, thermal oil, Formcook, frying line (CFS, GEA, Koppens, Alco, Stork) - serial: Sprematec - length: approx. 10 m - width: 1350 mm inside / 1518 mm outdoor - heated thermal oil - year: 10/2003

CALIBRATION TUNNEL COOLING TUNNEL LOADING TUNNELS EQUIPPED FOR DIAM TUBES. 20 TO 160 MM HOURLY PRODUCTION: 280-300 KG/HOUR

PRE-ALPINE REGENERATION LINE COMPLETELY REVISED, ELECTRICAL WIRING, VENTILATORS, PULPIT. EQUAL TO THE NEW! MATERIAL: PE PP PC PS ABS HOPPER WITH DOSING UNIT EXTRUDER WITH DIAM SCREW. 105 MM. 35 L/D AVERAGE PRODUCTION 300/450 KG/H BASED ON MATERIALS ENGINE: 117 KW OIL PUMP VACUUM DEGASSING PUMP centrifuge Cabinet

Production line for the mannufacture of sacks for cement and building material, consisting of one universal tuber 981, Gartemann + Hollmann, and two valve sack bottomers 525, Gartemann + Hollmann

Qty. 1 Second-hand aluminium vertical billet casting plant Mfc.: Wagstaff, Tongrun, Stas Built: 2012 Stopped: 2016 Billet dia.: Line 1: 101.5 – 228.6 mm (4” – 9”) Length: 6300 mm Dia. 101.5 mm – 112 Strands Dia. 127 mm – 76 Strands Dia. 152.4 mm – 112 Strands Dia. 177.8 mm – 72 Strands Dia. 203.2 mm – 62 Strands Dia. 228.6 mm – 50 Strands 1 Qty. 1 Second-hand vertical billet casting line – LINE 1 Molding tables for vertical casting of Aluminium billets of 112 billets with 101.5 mm, 127 mm or 152.4 mm in dia. Other table with 72 billets of 177.8 mm, 203.2 or 228.6 mm in diameter 2 Qty. 2 Melting Furnaces with 60 t capacity/each, and 8 t/h fusion rate, Natural Gas, Regenerative System, Manufaturing by Tongrun in 2011 – China. 3 Qty. 3 Homogenising Furnaces, with 35 t/each for billet, Natural Gas, Cycle 8 t/h average. 4 Qty. 1 Holding  ...