cake line used for sale

Rubber hose line, black FACAB-PIREFLEX H07RN-F 1x185 ( H07RN-F1x185 ) Length: 7 m with 2 x cable lug M12 and cable gland PG36 used ! Dimensions: 600 x 600 x 100 mm

Linear regulator, electronic module KNIEL CKÜ 5.1,5 ( CKÜ5.1,5 ) 105-011-02.02 Input: 115 - 230 V AC 45 - 60 Hz Output: 5 V DC 1.5 A Output power: 8W used !' Dimensions: 190 x 130 x 30 mm

LINE-FILTER, Active Line Module, Interference Filter SIEMENS 6SL300-0BE31-2AA0 120 kW 275 / 480 V 220 A 45 - 65 Hz used, tested ! Dimensions: 530 x 300 x 260 mm

Linear Regulator, Electronic Module KNIEL CÜ 5.3 ( CÜ5.3 ) 103-006-02 Input: 230 V AC 45 - 66 Hz Output: 5 V DC 3 A Output Power: 15 W New ! Dimensions: 190 x 50 x 130 mm

Line filter MANN + HUMMEL 67 502 62 026 Filter cartridge: W 920 14 bar 25 l/min New ! Dimensions: 150 x 115 x 100 mm

Line filter, double filter MANN + HUMMEL 67 730 62 266 filter cartridge: WD13 145 20 bar 360 l/min with used and cleaned filter cartridges ! used, tested ! Dimensions: 610 x 420 x 150 mm

Line filter, with electrical maintenance indicator MAHLE PI 2232-119 ( PI2232-119 ) Filter cartridge: OC168 approx. 0.8 m Connection cable used ! Dimensions: 290 x 150 x 80 mm

Pneumatic Linear Cylinder ORIGA 288415 / 80006773 stroke: 350 mm New ! Dimensions: 510 x 70 x 45 mm

In-line pump, central lubrication, lubrication pump VOGEL MKU2-KW3-22013+428 Q: 0,0,0,000 2 l/min p: 30 bar motor: 0.105 kW 2700 rpm 230 V 1AC 50 / 60 Hz tank capacity: 2.7 l used, tested ! Dimensions: 300 x 140 x 300 mm

Hego cut-to-length line Working width 500x2mm Speed 10-12m/min Decoiler mechanical max. 1000kg Coil inner diameter 400/508mm Straightener with 9 straightening rollers and 2 feed rollers and film unwinders The offer is aimed exclusively at tradespeople within the meaning of §14 BGB no sale to private individuals!

Foil wrapping line for mailings with - shrink tunnel Make Dekapacker Model SPK 4-35 Year 1999 basic description this line exists of 4 feeders, a bundle packer with side seal, a shrink tunnel, a U-turn belt and a delivery belt Dekapacker feeders Station 1 non/stop push feeder for i.a. books or other rigid materials Station 2+3+4 non stop rotary vacuum feeders for booklets, signatures, sheets, labels Dekapacker wrapper Model SPK 4-35 Width 90 - 350 mm Height up 120 mm Speed up to 40 cycles per minutes Sealing on 2 or 4 sides Dekapacker shrinking tunnel Width 500 mm Heigth 300 mm Belts Belt 1 U-turn belt Belt 2 Straight belt General information Foil details For PE and shrink foils, 20-60 micron. up to 600 mm Details waste material is winded up Video Click here Available direct

Painting line Dimensions: painting line with conveyor and PLC. inlet and ionization: 2300mm long x 1500mm wide x 1200mm high paint booth: 2000mm long x 4300mm wide x 3200mm high evaporation zone: 1600mm long x 1600mm wide x 1400mm high Oven: 4200mm long x 1600mm wide x 2300mm high supply air/exhaust air pipes: construction height approx. 1200mm Find more here - /

5.500 bph Bertolaso brand bottling line Model: MONOBLOCK OLIMPIA 25/25/4/1/1 Designations: Rinser, filler, corker, derh cap, capper, crown corker, cap feeder, cork feeder, bottle washer-dryer, stainless steel chain. Product - Still wine Bottle sizes Round 375ml, 500ml, 750ml, 1000ml and 1500ml Diameter max 110+/-2mm Diameter min 55+/-2mm H of the bottle max 360mm H of fl. min 180mm Capacity 5.500 bph with 750ml bottle With the plant we fill on average approx. 1Mio. bottles per year. Find more here - /

Fubo 2” flooring line Plant is ready for production Key data: Attachment Fubo 2 Construction year 1999 Format finished product 193mm x 1380mm Maximum speed 6-8mm 80 parts per minute / 10/12mm 60 parts per minute Feed longitudinal machine 130m/min Feed cross machine 30 m/min Stacking areas for semi-finished products 2 Buffer spaces for semi-finished products 2 Spare plate space 1 Longitudinal saw (dividing saw) 11 motors with gearbox (2 hoggers, 9 saw blades) Longitudinal machining (Homag) 10 Motors 6-8KW Cross processing (Homag) 12 Motors 5-8KW Baumer control system (service discontinued) 2014 S/N:35983 Cardboard packaging (folding boxes only) Buffer spaces for finished pallets 6 places + 1 on VW + 1 stacking place Find more here - / Contact us at -

2008 Shikoku Kakoki ELOPAK S-PS80HA & 2011 OYSTAR A+F Traypacker Elopak US80 filling line - filler - to packer Model: ELOPAK S-PS80HA Manufarcturer: Shikoku Kakoki Year: 2008 Applicator: 3x PLA-S30 Einpacker: OYSTAR A+F Traypacker Year of construction 2011 The machine has a capacity of 8,000 pkg/h Fruit juice and iced teas were bottled on this line in Diamond Curve 0.5 l, 0.75 l and 1 l gable-top packs Find more here - / Contact us at -

Yamato Multihead weigher Model: ADW-510SW 10 head Year: 2015 2kg drop Ilapak VT2000 VFFS Bagger 400mm jaw Year: 2005 Complete with gantry & Stairs 2600mm x 2600mm Incline conveyor 400mm wide

Manufacturer: IVM Model: DTPlus-600-2-XL (2 x Epson i3200 Print Heads) Year of Manufacture: 2023 Type of Machine : Digital Transfer Printing Line - Printing Speed: - 4-PASS: 12 m²/hour - 6-PASS: 8 m²/hour - 12-PASS: 4 m²/hour - Maximum Print Width: 600 mm - Maximum Print Resolution: 1800 dpi - Print Thickness: Adjustable from 1.5 mm to 6 mm Technology and Features: - Printhead Technology: Epson i3200 - Number of Printheads: 2 - Printhead Spacing: 10 mm - Ink Colors: CMYK + White - White Ink Circulation: Automatic - Color Management System: Standard - Ink Type: Water-soluble pigment ink - Ink Supply System: CISS (Continuous Ink Supply System) - Printing Costs: 1 L white ink = 40 m Drying and Software: - Drying Method: Air Drying System - RIP Software: MainTop Power and System Requirements: - Power Supply: 220 V - Power Consumption: 1200 W - System Requirements: Windows 7 or W ...

Used biscuit line for continuous round and square rolls BERTUETTI, Type: Universal Line - for round rolls, such as hamburgers and square ones - Universal dough divider and rounder SV250-G14 - Continuous rounding by G14 - Feed belt 1,900 mm - 6 rows - 1, 2, 3 or 6 rows can be used - Guillotine cutting system - Automatic sheet loader N20 for sheet sizes 60 x 100 cm - Lifting tipper - Dough intake - Sowing SST - Good condition, ready for immediate use Visits and test runs are possible by arrangement.

We offer new, unused seamless hot-finished line pipes with high-quality PE and PP coating. The pipes have never been installed and have been stored at their designated location since delivery. Available Specifications: 230 tons – 273 mm x 12.4 mm x 13 m, PE coating, standard: EN 10208-2, L290NB 50 tons – 273 mm x 16 mm x 13 m, PP coating, standard: EN 10208, L290NB Manufacturer Certificate (Mannesmann) available Coating by Rhenania Additional Services: Custom Pipe Cutting – Tailored to fit 40-foot containers for efficient transport International Shipping Available (Shipping costs to be covered by the buyer) Loading Services – We handle the loading process

Mint dough line for continuous production of hot dog buns BERTUETTI, type: Universal Line - Unloader BM0-1-C707 - Trays 60 x 80 cm or 60 x 40 cm - Head machine SV 200 CTF 6040 - Lifting tipper for crates 60 x 40 cm and height 32 cm - Dough feeder SAL2 - Long scooter F70 - Sheet metal deposition in BM0 loader - Computer control - Dimensions line: L 7,128 mm, W 1,258 mm - Lifter tipping height: 2,974 mm - Very good condition, ready for immediate use The plant is being sold for restructuring. Visits and test runs are possible by arrangement.

FULL WEIGHING AND BAGGING LINE - EXCELLENT CONDITION FULLY WORKING COMPLETE WITH STAINLESS STEEL GANTRY, INCLINE FEED CONVEYOR AND OUTFEED CONVEYOR GEA SMART PACKER GX250H - VERTICAL FORM FILL SEAL BAGGER 250MM JAW MACHINE NO: 12330 YEAR: 2017 WEIGHT: 950KG 415V MULTIPLE TUBE SETS ISHIDA MULTIHEAD WEIGHER MODEL: CCW-RVE-216B-10/15-SS MACHINE NO: 560012161 16HEAD YEAR: 2017 240V WEIGHT: 535KG PLEASE DO NOT HESITATE TO CONTACT FOR MORE INFORMATION

Used Tubular UHT Plant – Alfa Laval M10-MFMC (6,500–13,000 l/h) Industrial tubular UHT processing plant designed for the thermal treatment of dairy products such as UHT milk and UHT cream. The Alfa Laval tubular UHT system provides reliable sterilization and continuous processing suitable for medium to high-capacity dairy production. General Information - Manufacturer: Alfa Laval - Sterile Tube Type: M10-MFMC - Year of Manufacture: 1989 - Condition: Good used condition, serviced Technical Specifications - Production Capacity: 6,500 – 13,000 l/h - Maximum Temperature: 137 °C - PLC System: SIEMENS S5 Recent Area of Use - The plant has recently been used for processing: - UHT milk - UHT cream Key Advantages - Reliable Alfa Laval tubular UHT technology - Suitable for continuous sterilization of dairy products - Flexible capacity range 6,500–13,000 l/h -  ...

EMMEDCI MC 2004 RIGID BOX PRODUCTION LINE Manufacturer: EMMECI S.R.L Italy Type: MC 2004 Year of production: 2004 Max Sheet sizes: Length: 180 mm – 900 mm Width: 95 mm – 760 mm Box sizes: Length: 83-600 mm Width: 31-400 mm Hight: 12-190 mm Machine is in production. Test is possible Please contact PP Machinery for information or an inspection

Qty. 1 Second-hand sandwich panel production line Line manufacturing of insulated metal panels for sectional doors (garage). Mfc.: METECNO Technology SPA; FASPAR Built: 1994 Reconditioned and commissioning: 2006 Useful working width: 500/610 - 10 mm Panel door thickness: 40 mm Sheet thickness: 0.37/0.70 mm Capacity: 1,500,000 m panels/year

Unused, complete automatic filling system with heating tank and conveyor belt. manufacture Danish Candle Machinery. Intended for wax-based candle production, but can be used for many other types of filling work. Everything made to order in 2021 in Denmark. Supplied with instructions and EU declaration of conformity. Filling system for filling five units at a time • 1 x 6 kW / 3 x 400 v • Pump, pump bracket, hose • The nozzles are replaceable and come in sizes ø2, ø4 and ø6 mm Heating tank 2000 liters • Heating element: 1 x 9 kW / 3 x 400 v / 30 - 110 ° C • Dimensions: 220 x 120 x 134 cm • Inner and outer tank in stainless steel • Insulation cover in galvanized steel • Lid in aluminum Conveyor • Motor-driven and sensor-controlled • Dimensions: 5 x 0.5 m Find more here - /

CNC assembly line Brand: Alberti Type: BMF new machine Equipment for automatic insertion of fittings, plinth parts, drawer runners and many more. Can be equipped with automatic screwing devices, gluing indications and press-in tools. Plant expandable with many possible hardware feeding stations. This Alberti line can be customized according to your specifications. Machine bed made of welded steel tube structure, the upper part is made of aluminum frame. Components of the line: - Feeding - Processing zone with transport rollers - destacking Work table: - Driven PVC rollers at the inlet. Usable length: 2500mm, usable width: 840mm - Reference table with PVC rollers Usable length: 2500mm, working height: 840mm, adjustable +/- 30mm - Driven PVC rollers at the outlet Usable length: 2500mm, usable width: 840mm - Vertical workpiece clamps, autom. adjusted to wor ...

CONTROLS   PLC SIEMENS S7 300 OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 500 mm   sheet thickness max.: 4 mm   coil weight max.: 10.5 to   feedstock transport direction: right to left COIL CHAIR   coil weight max.: 10.5 to   stroke: 750 mm DECOILER   design: single reel   sheet width max.: 500 mm   sheet width (min): 150 mm   coil weight max.: 10.5 to   max. diameter of coil: 2020 mm   mandrel expansion range from: 470 mm   mandrel expansion range up to: 530 mm   feed velocity max.: 20 m/min LEVELLER UNIT   sheet width max.: 500 mm   sheet width (min): 150 mm   sheet thickness max.: 4 mm   sheet thickness min.: 2 mm   number of leveller rolls: 9   diameter of levell ...

Pressure total: 600 ton Ram stroke: 762 mm Slide adjustment: 406 mm Shut height (stroke down, adjustment up): 1322 mm Free frontal opening L-R: 3700 mm Table surface area : 3350 x 2134 mm Slide area: 3350 x 2134 mm Die cushion capacity in table: 180 ton Die cushion stroke: 305 mm Ejector in ram: 60 ton Ejector stroke in ram: 230 mm Number of strokes: 16 s.p.m. Required power: 90 kW Weight of machine approx.: 185 ton

Decoiler Coil weight: 4,5 ton Material width max.: 520 mm Coil exterior diameter: 1600 mm Expansion range: 460 - 530 mm Leveller / Straightener Material width : 20 - 400 mm Number of levelling rolls: 7 pcs. Diameter of the levelling rolls: 60 mm Number of pull out rolls: 4 pcs. Diameter of the pull out rolls: 60 mm Material thickness: 0,4 - 3,5 mm Feeding speed: 2 - 10 m / min Roll feeder Material width max.: 310 mm Material thickness: 3,0 mm Material thickness at max. width: 2,8 mm Material thickness at max. cross section: 850 sq mm Number of feeding rolls: 2 pcs. Diameter of feeder rolls : 80 mm Feeding speed: 104 m / min Required power: 1,5 kW

Decoiler Coil weight: 5 ton Material width: 80 - 500 mm Coil exterior diameter: 1800 mm Expansion range: 508 mm Speed: 50 m / min Leveller / Straightener Material width : 50 - 500 mm Number of levelling rolls: 9 pcs. Diameter of the levelling rolls: 65 mm Number of pull out rolls: 2 pcs. Diameter of the pull out rolls: 150 mm Material thickness: 1 - 8 mm Feeding speed: 50 m / min Feeding length: 0,1 - 9999,9 mm

Manufacturer: Jago Lochreihenbohrmaschine, Type: B29PN, Year: 1992, Control: hand, Drilling engine kW: ca.1,5, Working range max mm: 60, Drilling support horizontal: 1, Drilling beams: 1, Drilling beam swivel-mounted: yes, Number of drill spindles: ca.27, Lochraster: 32, Swivel pneumatically 90-45°: hand, Foot switch: yes, Max. drilling depth in mm: 60, Year :1992

Manufacturer: Gannomat, Type: Super Drill, Control: hand, Drilling engine kW: 2,2, Working range max mm: 120, Drilling beam swivel-mounted: yes, Lochraster: 32, Spindelanzahl 1: 19, Swivel pneumatically 90-45°: yes, Work piece support: yes, Work stations: 1, Foot switch: yes, Max. drilling depth in mm: 80, Max. drilling height in mm: 80,

Inv. Num. : 8281 Type: KTVF 55x3/1500 Producer: BC ECO TECH Created: 2010 Parameters: Capacity: 200 kg/h Maximum number of film layers: 3

The Continuous Galvanizing Line No. 3, built in 1983 by NKK-Hitachi, offers a production capacity of 300,000 tons per year, processing low carbon steel coils with widths ranging from 610 to 1,300 mm and thicknesses of 0.27 to 2.3 mm. The line operated until March 2019. This left-hand line includes advanced features such as a high-capacity furnace, air knife wiping system, and a skin pass mill for superior surface quality. The line's equipment is designed for maximum coil weights of 45,500 kg and speeds up to 200 mpm. Its robust configuration, including multiple bridle rolls, deflector rolls, and chemical treatment tanks, ensures efficient galvanizing. The line's modern furnace output reaches up to 50 tons per hour, making it a high-performance solution for large-scale steel galvanizing operations. Make: NKK-HITACHI Year of manufacture: 1983 Mothballed since: Ceased producti ...

Manufacturer: Kraftanlagen Heidelberg Machine type: KK 75 FW Year of Make: 1990, 2018 Renewal 2018 Control & safety technology renewed Specifications: Roller arrangement: «F» Number of rollers: 4 Roller width: 2500 mm Roller bale diameter: 750 mm Drive power roller 1-4: 98 kW Roller speed: 2.5 – 50 m/min Roll gap adjustment: cylindrical worm gear Roller heating: hot water Plant control: Retrofit 2018 - LAE Engineering The calender line is offered, if you are interested with the Buss kneaders, including unwinding, calender rolling mill and winding. The calender was used for the production of homogeneous and reinforced PVC-P waterproofing films. Ongoing investments made in recent years. Among other things: 2018 Retrofit of the entire control technology line (excluding winders) 2018 Investment in safety equipment 2018 Investment in exhaust air 2019 Edge cutt ...

KHS Aseptic PET filling line - approx. 15,000 bph based on 0.5 ltr. PET bottles Filling product: Juice and tea Bottle size: 500 ml PET bottles Closure type: PCO 28 - 1810 The aseptic system is a wet aseptic system Year of manufacturing: 2009 consisting of: SIG Blowing Machine Preform feeding System Air conveyor system KHS Aseptic filler and capper Cap sterilization and feeding Unit Bottle conveyor cystem Plate UHT sterilizer Shrink wrap packaging machine Not included in the line is the blending and CIP units. The line is still installed and can be inspected in full operation until 1st of May 2025.

Inv. Num. : 6496 Type: BCE 1-45-25D Producer: Battenfeld Created: 2007 Parameters: Switch-on hours: 47000 h Table dimensions: 2500 x 400 mm Screw length: 25 mm Screw diameter: 45 mm Material: PVC Towing speed: 3.5-50 m/min Head diameter: 45 mm Machine dimensions: 2580 x 900 x 1100 mm Weight: 1030 kg Line Components: Calibration table type CT2500/V1 Extruder Type 1-45-25D Towing type B100E

Motorised roller table 19.3000mm year 2007 consisting of: 2 x roller tables 1300x6000mm 1x roller table 1300x4000mm 1 x roller table with longitudinal roller guide 1300x 3300mm Working width 1,300 mm Frame: painted steel frame Castors: 30 mm plastic disc castors, white Roller spacing: approx. 50 mm Stopper: spring-loaded disc stopper Legs: adjustable H-legs, height descending 900>800 mm adjustment +100 mm CE documentation ADDITIONAL: Frequency inverter for speed control

For Sale: Complete Drum System for Zinc Electroplating Year of Manufacture: 2000 This complete setup includes all essential components for efficient operation: - Drum Line with 5 TW - Centrifuge with TULZ from WMV - ROSS Cooling System - Drum Dryer Find more here - / Contact us at -

2000 X 2-6 MM cut-to-length line was built in 2018. The line was specially configured for machining stainless steel in a start-stop system with a stationary guillotine and sheet pick-up from the discharge conveyor. Maximum production efficiency is ensured by the use of a special system that packs the sheets into bundles after cutting. Other proven solutions, in turn, guarantee many years of trouble-free operation of the line. The offered cut-to-length line has undergone a general overhaul and is in perfect condition. All components meet the safety standards required by the applicable directives, as confirmed by the CE declaration. The 2000 X 2-6 MM cut-to-length line is fully complete and consists of the following components: – scissor lift table – sheet metal decoiler 7.5 t – infeed and guide system – sheet metal straightening unit – double-side foiling system – gui ...

Decoiler Coil weight: 2 x 4,5 ton Material width max.: 520 mm Coil exterior diameter: 1800 mm Expansion range: 460 - 525 mm Leveller / Straightener Material width : 30 - 500 mm Number of levelling rolls: 11 pcs. Diameter of the levelling rolls: 90 mm Number of pull out rolls: 4 pcs. Diameter of the pull out rolls: 90 mm Material thickness: 0,8 - 5,0 mm Feeding speed: 3 - 30 m / min

A complete punching line with Helmerding eccentric press is available. 1) Eccentric press Helmerding KDH 100, year of manufacture: 1997, power: 11kW, pressing force 30° before and after: 100t, stroke adjustment: 8mm-110mm, ram adjustment: 80mm, stroke rate: 40-140 strokes/min, length: 2100mm, width: 1500mm, weight: approx. 12000kg. 2) Kohler 1000.1 reel, year of manufacture: 1983, power: 1kW, load capacity: 1000kg, length: 1500mm, width: 1100mm. 3) Straightener Kötje RM-7-300-60, year of manufacture: 1998, power: 3kW, max. strip width: 300mm, straightening roller diameter: 60mm, number of straightening rollers: 7, length: 1400mm, width: 1200mm. 4) Roller feed Kötje EWV 80-50-S, year of manufacture: 1998, power: 4kW, length: 750mm, width: 700mm. Documentation available. On-site inspection is possible.

Widebelt Sander line with 3 machines Working width: 1300 Composed of: Boere Elite - 1 x calibration unit with contact roller - sandinmg unit from below Ernst LKB - Cross Sanding Unit - Longitudinal Sanding Unit OTT RSO - Calibration Roller - Sanding pad

A complete 5-layer coextrusion blown film line with 5 extruders and all peripheral equipment is available. Total line dimensions X/Y/Z: 14m/22m/11m, blow head: Kiefel Worms FSBK 500 with IBC, die diameter: 500mm, film width range: 700mm-2000mm, haul-off width: 2000mm, winding width: 2000mm, line speed: 120m/min, melting capacity: 500kg/h, total power requirement: approx. 300kW. 1) Double winder Wintech, winding width: 2000mm, film thickness range: 35µm-150µm, max. roll diameter: 1000mm, max. roll weight: 1900kg, core inner diameter: 152mm/6inch. 2) Extruder Kiefel Worms 70.29D, power: 89kW, screw: 5-zone barrier screw, speed: 125rpm, renewed: 2010. 3) Adhesive extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone barrier screw, speed: 200rpm. 4) Center extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone core progressive screw, speed: 175rpm. 5) Adhesion promoting extruder Kiefe ...

Key data: 90 mm, 30

Mono extruder type W & H 90 30 D, Film thickness 20 -200my, Nozzle diameter = 350 mm, Working width max. = 1500 mm, Winder tandem winder max diameter = 1000 mm, Max. winding width 1650mm Other: IBC  Thickness Control Film Dosing System = Gravimetric 

Hitec, Z-Elevating conveyor belt., Dimensions in the photo album., More information on request.

Depositor, 2 tanks, 4 heads per tank.

Assembly line with 4 assembly stationsRoller conveyor made of aluminium system profile and INTERROLL metal rollersVery universally applicable due to modular elements and assembly pallets 400x700 mmRoller conveyor elements made of aluminium system profile MiniTec - like BOSCH REXROTHExperium height: 815 mmComplete length: 13250 mm4 pieces Longitudinal roller conveyor: usable width 405 mm, length 2500 mm, overall width: 510 mm, 16 rollers each3 pieces transverse roller conveyor: usable width 705 mm, length 1000 mm, width: 810 mm, 10 rollers each1 piece transverse roller conveyor: Usable width 705 mm, length 2500 mm, overall width: 810 mm, 30

Vibratory Spiral Conveyor / Sorting Device / Spiral Conveyor / Vibratory Conveyor RNA Shaking Bowl, Sorting Device / Screw Feeder with Vibratory Conveyor for Screwing TechnologyFeeding System, Feeding DeviceManufacturer: RNA Rhein-Nadel Automation GmbHTyp: SRC-N 250-2LSer.- No: 03611 Year of Construction: approx. 2000Pot Diameter Bottom: 300 mmPot Diameter Top: 350 mmPot Inner Height: approx. 25 mmSorting Track Width: approx. 30 mmTotal Height (Drive + Pot with Sorting Path): 380 mmOscillation Frequency: 100 Hz / 6000 min-1Power supply: 230 volts, 50 Hz- The

Newtec 9 heads weigher with PCS system, also available with funnel