cable used for sale

Fiber optics BALLUFF BFO001P BFO 18A-LFF-MZG-10-0,5 ( BFO18A-LFF-MZG-10-0,5 ) Series: 18A Diameter: Ø 2 mm Optics: 90° Length: 450 mm ( 2x ) New ! Dimensions (packaging): 145 x 110 x 35 mm

Small but very robust and powerful shredder for a wide range of tasks such as old cables, plastics, wood, etc. With hydraulic, electronically controlled feed. Drive 18.5 + 2.2 kW (rotor + feed). Rotor shaft with connections for connecting a cooling unit (e.g. when used for old NYM cables. The machine is and little used from our demo machine inventory. The machine is offered with a one-year used machine warranty.

Machine for processing mixed old cables including fine conductors and stranded cables, Due to the special rotor system and the large flywheel masses, the system is also suitable for operation in manual insertion. The machine is equipped with a cooling unit that optimizes the granulator with a flow temperature of 0.5 °C for the use of heat-sensitive cables, such as NYM etc. The control electronics of the system enable fully automatic operation in a line with pre-shredder, conveyor belt, dosing accumulator, etc. The machine includes several sets of knives and different screens.

Fiber optics, plastic fiber optics PEPPERL+FUCHS KHR-C02-2,2-2.0-K94 805867 Diameter: Ø 2.2 mm Length: 2000 mm ( 2x ) end piece: M6 Material: Plastic ( light outlet , core ), PVC ( sheath ), stainless steel 1.4305 / AISI 303 (V2A) ( end piece ) New ! Dimensions ( Packaging ): 170 x 160 x 10 mm

Description: Composed of: N°4 reels including one reel of total capacity 1025 meters, two reels of total capacity 250 meters and one reel of total capacity 1000 meters. We do not guarantee the completeness of the reels (assumed capacities) Approx. Onsite Dimension. (l x w x h): 1,000 x 500 x 600 mm, weight approx.: 50 kg

Description: Upper machine for labeling and cutting cables to length and lower machine for cutting cables to length only With MEDTRONIC control unit Approx. Onsite Dimension. (l x w x h): 2,100 x 850 x 1,500 mm, weight approx.: 300 kg

CABLE POWDERING MACHINE FOR ELECTRICAL CABLES EXTERNAL DIMENSIONS Length : 1.000 mm Width : 1.000 mm Height : 2100 mm CABLE PASSAGE Size : 100 mm diameter Height from ground : 1.000 mm Cable insulation material : PVC, PE, XLPE to be used Cable size to be powdered: 5–70 mm diameter HIGH VOLTAGE UNIT Input voltage : 14V 16kHZ Output voltage : 100 kV Max. current : 120 µa Polarization : Negative TECHNICAL SPECIFICATIONS OF THE MACHINE Input : 220V 50 Hz Installed power : 1 KW Extraction fan : 3.000 m³/h 0,75KW Vibration : 0,15KW 220V Compressed air : 6-10 bar Air consumption : 300 lt/min Filtration : 320x300mm polyester filter Filter cleaning : Automatic Powder recycling : Vibration sieve Powdering method : Application by 2 electrodes, electro static application

GUIDETTI SINCRO 415, Compact cable recycling line, One machine to grind and separate plastic from CU - AL, Low power consumption : Power 15 kw (20,1Hp), Throughput rate 150-200 kg/h (330-440 lbs/h), Including :, - conveyor, - a knife-granulator 3 rot.+2 still knives 450 mm long, rotor dima.450 mm., - a zig-zag separator with dust sleeve, - turbine, - dry separation table, Dimensions: LxWxH 2,3 x 1,5 x 3.15 mm. (90.6 x 59.1 x 124), Total Weight about 1.200 kg, INSTALLED POWER: 15 kw

2 New adapter cables for DRO Heidenhain 2 universal extension cables DRO

1230pcs LOKITEC Oil Radiator Electric Heater  This batch of high-quality electric oil radiators from LOKITEC provides an efficient and comfortable heating solution for various living and working areas. With an impressive wattage and a host of smart features, these radiators provide pleasant warmth and maximum comfort. Certifications: All oil radiators are CE, ROHS and CB certified, which ensures their safety and quality in accordance with international standards. Offering an outstanding combination of performance, efficiency and comfort, these oil radiators are ideal for use in a variety of environments. With their robust construction and numerous features, they are a reliable heating solution for cold winter days. Quantity: 1230 pieces  New RRP total € 190,510 Unit price 18,00 € net Transportation can be arranged by us.  Specifications and features: 1. LOKITE ...

Control generation: EKC2 (knitelligence® generation) Multi-touch panel: Yes Working Width: 50" / 127 cm Knitting and transfer systems: 3 (front/back) Spacing between systems: 5" fine mesh (E10-20; E6.2-10.2) 5.2" coarse mesh (2.5.2-5.2; E5-8) Machine dimensions: Length 3080 mm / Depth 1203 mm Supply voltage: Flexible power supply (AC 230V/400V +/-10%) Yarn guide: Direct (from above) Yarn carrier: 16/24/32 all in one Yarn Control Units: 16/24/32 Clamping and cutting device: 8/12/16-speed left/right Take-off system: Multiflex + auxiliary + comb or Ribbon with comb Innovation Packages: - Improved central lubrication Oil Collection Tank Switch for forward and backward rotation of the belt pick-up system Mirrors in the fabric storage area for Strip Removal Machines Lighting in the fabric storage area Can-Open Feeder Wheel Interface Split stitch without exchan ...

Control generation: EKC2 (knitelligence® generation) Multi-touch panel: Yes Working Width: 50" / 127 cm Knitting and transfer systems: 3 (front/back) Spacing between systems: 5" fine mesh (E10-20; E6.2-10.2) 5.2" coarse mesh (2.5.2-5.2; E5-8) Machine dimensions: Length 3080 mm / Depth 1203 mm Supply voltage: Flexible power supply (AC 230V/400V +/-10%) Yarn guide: Direct (from above) Yarn carrier: 16/24/32 all in one Yarn Control Units: 16/24/32 Clamping and cutting device: 8/12/16-speed left/right Take-off system: Multiflex + auxiliary + comb or Ribbon with comb Innovation Packages: - Improved central lubrication Oil Collection Tank Switch for forward and backward rotation of the belt pick-up system Mirrors in the fabric storage area for Strip Removal Machines Lighting in the fabric storage area Can-Open Feeder Wheel Interface Split stitch without exchan ...

Control generation: EKC2 (knitelligence® generation) Multi-touch panel: Yes Working Width: 50" / 127 cm Knitting and transfer systems: 3 (front/back) Spacing between systems: 5" fine mesh (E10-20; E6.2-10.2) 5.2" coarse mesh (2.5.2-5.2; E5-8) Machine dimensions: Length 3080 mm / Depth 1203 mm Supply voltage: Flexible power supply (AC 230V/400V +/-10%) Yarn guide: Direct (from above) Yarn carrier: 16/24/32 all in one Yarn Control Units: 16/24/32 Clamping and cutting device: 8/12/16-speed left/right Take-off system: Multiflex + auxiliary + comb or Ribbon with comb Innovation Packages: - Improved central lubrication Oil Collection Tank Switch for forward and backward rotation of the belt pick-up system Mirrors in the fabric storage area for Strip Removal Machines Lighting in the fabric storage area Can-Open Feeder Wheel Interface Split stitch without exchan ...

Control generation: EKC2 (knitelligence® generation) Multi-touch panel: Yes Working Width: 50" / 127 cm Knitting and transfer systems: 3 (front/back) Spacing between systems: 5" fine mesh (E10-20; E6.2-10.2) 5.2" coarse mesh (2.5.2-5.2; E5-8) Machine dimensions: Length 3080 mm / Depth 1203 mm Supply voltage: Flexible power supply (AC 230V/400V +/-10%) Yarn guide: Direct (from above) Yarn carrier: 16/24/32 all in one Yarn Control Units: 16/24/32 Clamping and cutting device: 8/12/16-speed left/right Take-off system: Multiflex + auxiliary + comb or Ribbon with comb Innovation Packages: - Improved central lubrication Oil Collection Tank Switch for forward and backward rotation of the belt pick-up system Mirrors in the fabric storage area for Strip Removal Machines Lighting in the fabric storage area Can-Open Feeder Wheel Interface Split stitch without exchan ...

Includes (1) panel 1 8DJH-L, dimensions: 2000x430x800mm, rated voltage: 24kV, operating voltage: 20kV, rated current: 250A, with 1x feeder panel IN=630A, 1x load-break switch and circuit-breaker panel IN=250 A, UMZ protection, etc., 1 SF6 leakage monitor with manometer. MCA 4, voltage and current measurement by means of transformer interlocked with pressure-resistant cable box, pressure relief channel, 1 SF6 leakage monitor with manometer (2) panel 2 8DJH-L, dimensions: 2000x430x800mm, rated voltage: 24kV, operating voltage: 20kV rated current: 250A, with 1x transformer outgoing panel IN=630A, 1x switch-disconnector and circuit-breaker panel IN=630 A, UMZ protection, MCA 4, interlocked with flameproof cable box pressure relief duct and 1 SF6 leakage monitor with manometer (3) Panel 3 8DJH-V, dimensions: 1800x430x800mm rated voltage: 24kV, operating voltage: 20kV, rated current: 250A, wit ...

Manufacturer: LUKAS / JAWES OF LIVE New device with warranty for cutting cables, car parts, usable in recycling Cutting device LSI 200 Mouth width: 125 mm Weight: 13.8 kg Lukas cable shears Hydraulic cable shear for the mobile use. New machine The type LS/ 200 can be used very good to handle with heavy cable. Because of its excellent shear forces it saves much time. Its low weight makes it possible to work economically. The unique Lukas Star Grip valves makes it easy to use. The cutter blades can be resharpened. This makes a long service life. Operating pressure: 50 MPa Shear forces: up to 270 kN Width of mouth: up to 125 mm Dimensions: l/w/h 680 x 190 x 163 mm Weight: 13.8 kg. Hydraulic power system Operating pressure: 50 MPa Oil tank: 9l Output: low pressure 4.4 l/min high pressure 1.4 l/min Power: 1.5kW with 3000 min-l /230 V Dimensions: l/w/h 372 x 312  ...

Machine type: Pulse arc inverter welding machine Make: Rehm Type Megapuls 500 Attachment no. 228.434 Connection voltage 3 x 400 volts Setting range 10 – 500 amps Duty cycle 45 % d.c. at 500 amps 60% d.c. at 450 amps 100% d.c. at 350 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case and 1.6 mtr. long VB cable Wire feeder 4-roller drive Fuse 32 amps Dimensions L x W x H 1,030 x 600 x 1,300 mm Weight 175 kg Special accessories for filter attachment and wheels on the DV box Age approx. 10 years Condition: workshop-tested, good incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauge ...

Crimping pliers, crimping pliers, cable lug pliers, mechanical crimping pliers, pressing jaws, pressing tool for cable end ferrules, wire end ferrules, cable lugs, manual crimping pliers -Manufacturer: WMW, manual crimping tool type PH 2.5C -Pressing: of cable lugs and cable connectors -Pressing force: 25.0 N -Press path: 15 mm -Transport case: including accessories, see photo -Number: 4x pressing pliers available -Price per piece -Dimensions tongs: 600/180/H25 mm -Weight compl.: 3,2kg/St

Crane block, deflection pulley, cable pulley, steel cable pulley, cable deflection pulley, crane, pulley block, cable pulley with pulley block, wire cable pulley block -Manufacturer: Rosinski, pulley with pulley block -Type: WZ 12 WZ 22 -Load: up to 500 kg -Recommended rope Ø: up to 6 mm -Hole distance: 88/55 x 11 mm -Dimensions: 150/80/H165 mm -Weight: 3.3 kg

Electric cable winch, cable winch, hoist winch, construction winch, electric cable hoist, cable hoist -Tension 1 layer: 2000 kg -rope speed 1 layer: 10 m/min - Wire rope: 10 mm -Cable length: 65 m per layer -electrically powered -without control -Number: 2x winches available -Price per piece -Dimensions: 1850/640/H650 mm -Own weight: 616 kg

This machine is particularly suitable for the processing of electric wastes with PVC, rubber, iron and lead. The processing of the cable is carried out in the two-blade system both knives from both sides at the same time. - cut the cable of 2 pages in diameters ranging from 30-150 mm - are independently adjustable continuous operation or foot control can be set at Dashboard roles system to the Insert the cable in the machine fast and simple replacement of the MesserDurchmesser cable: 30 to up to 150 mmTrenngeschwindigkeit: 12 meters per MinuteAntriebsleistung: electric motor 6 KW / 380 VGesamtgewicht: 600 KgAbmessungen (Lxwxh) : 1800 x 1000 x 1200Anzahl of the blade: 2 StückMesserverstellung: mechanical

Technical data: -Equal water-cooled AC unit TIG TR 4,. -water-cooled MIG-MAG system DV - IV - XT - E. welding plant STH 400 for welding of: stainless steel, steel, aluminum, etc. -16 x welding program be selected with: -. Setting selection: Stick welding, Tig - welding AC / DC, MIG-MAG welding -Digital Volt + amp display -Welding current continuously adjustable by 10 A / 15 V to 400 A / 34 A - max welding current of 400 A max 60% ED 315 A 100% ED -Power 400 V / 43 A / 16 kVA -Heart monitor -Welding current rise - and welding power descent setting -Back fire setting -Gas before. - current setting -water cooled Tig welding - torch 8 m, lightweight design -E - welding cable + ground cable - water-cooled MIG - MAG torch â separate wire feed case DV - IV - XT for MIG - MAG welding -4 wheels - wire feed -Intermediate package welder - wire feed case 4500 mm -P ...

Inverter welding machine for MMA welding TECHNOLIT type PROFImat 170 Plus MMA welding machine, inverter welding machine, electric manual welding inverter Serial no.: TB1703500316 Item no.: 440030 Year of construction 2022 Power TIG (DC) 170 Amp. 45% ED 150 Amp. 60% ED 135 Amp. 100% ED Power MMA 170 Amp. 35% ED 145 Amp. 60% ED 125 Amp. 100% ED Adjustment range 5-170 Amp. infinitely variable Mains connection 230 Volt, 50 Hz hot-start function (optimises ignition behaviour, simplifies welding start of electrodes that are difficult to ignite)- Anti-stick function (optimises electrode guidance and prevents electrode from sticking)- Arc force function (optimises arc stability and improves penetration) - Lift-Arc ignition - Rod electrode welding, can be used for all electrode types up to 4 mm- Ground cable with plug connection - Electrode rod with 3 meter cable and plug connection - equippe ...

ID3208 Unimog 405/12 year/Year of construction 2000 10360 hours/hours – 71.100 km Unimog with Nordmeyer DSB 2/6 drilling rig, auger pump, overhauled in 2020, maximum crown load 100 kN, feed 60 kN, drilling cable winch 19 kN, power flushing head 7 kNm, crushing device 11 kNm, cable impact device (cable pulling force 30 kN, drilling load 5 kN, stroke 400 mm) Unimog with Nordmeyer DSB 2/6 drilling rig, screw pump, overhauled in 2020, maximum crown load 100 kN, feed 60 kN, drill cable winch 19 kN, power rinsing head 7 kNm, crushing device 11 kNm, rope impact device (rope pulling force 30 kN, drilling load 5 kN, stroke 400 mm)

Power cable, control cable, servo cable SIEMENS MOTION CONNECT 6FX8002-5CA01-1BA0 Cable: 4G1.5 length: approx. 9.5 m VDE REG. No.: 6522-43/2006 used, tested ! Dimensions ( packaging ): 340 x 340 x 50 mm

Power cable, control cable, servo cable SIEMENS MOTION CONNECT 6FX8002-5DA01-1BC0 cable: 4G1.5 + 1P1.5 length: approx. 8.5 m VDE REG. No.: 6522-41/2005 used, tested ! Dimensions ( packaging ): 340 x 340 x 50 mm

Proximity switch, proximity sensor, position switch, socket cable, socket cable, connection cable -Manufacturer: Festo, socket cable orig -Type: 159421 RN13 -Number: 2x cables available -Price per piece -Dimensions packaging: Ø 150 x 20 mm -Weight: 0.2 kg/pc.

Electric cable winch, cable winch, hoist winch, construction winch, cable hoist, console winch -Handover: in the current condition as seen -Accessories: Winch lever is missing -Manufacturer: Pfaff silver blue, ALU console winch -Type: D 270001 -Wire rope: Ø 5 mm -Cable length: 9 m -Dimension: 330/310/H290 mm -Own weight: 19 kg

Connection line, connection cable, cable line, socket cable, socket line, sensor line -Manufacturer: Murr Elektronik, M8 female 0° free cable end unused OVP -Type: 7000-08041-2100500 -Mat-No.: Code 47218 -Dimension package: 220/220/H10 mm -Weight: 0.2 kg

Connection line, connection cable, cable line, socket cable, socket line -Manufacturer: Festo, socket cable unused Ovp -Type: KMYZ-9-24-2,5-LED-PUR-B -Mat no.: 193786 -Number: 4x available -Price: per package -Dimension package: 200/180/H10 mm -Weight: 0.1 kg/piece

Ground tape set, flat weave tape, grounding tape PAGUS conductor nominal cross-section: 50 mm² conductor material: copper, tin-plated holes: Ø 6 / 9 mm distance between holes: 1145 mm Cable width: approx. 28 mm Cable height: approx. 3 mm cable set consists of 4 cables ! unused ! Dimensions(single cable): 1180 x 28 x 3 mm Dimensions: 100 x 80 x 20 mm

Crimping pliers, crimping pliers, cable lug pliers, mechanical crimping pliers, pressing jaws, pressing tool for cable end ferrules, wire end ferrules, cable lugs, manual crimping pliers -Lever arms: extendable 250 mm -for: various press jaws -Inserts for: Cable lugs DIN 46234 installed -Dimensions: 575/140/H50 mm -Weight: 2.6 kg

Terminal and trim box, road cell -Terminal box: for up to 4 load cells -Inputs and outputs: via PG screw connections -Protection class: IP 65 -4 inputs, cable gland M12 for cable diameter: 2 to 6.5 mm -1 output, cable gland M20 for cable diameter: 7 to 12 mm -Number: 2x available -Price: per piece -Dimensions: 205/110/H70 mm -Weight: 0.8 kg

Electric cable winch, cable winch, hoist winch, construction winch -Tension 1 layer: 365 kg -Tensile force 2 layers: 332.5 kg -Tensile force 3 layers: 300 kg -rope speed 1 layer: 10 m/min -Cable speed 2 layers: 11.25 m/min -Cable speed 3 layer: 12.5 m/min -Wire rope: 10 mm -Max. Rope length: 43 m -Power gear motor: 1.4 kW 1395 rpm -Equipment: electrically driven, with limit switch, without control -Dimensions: 900/650/H440 mm -Own weight: 137 kg

39x CO2 Welding Machines, Cable Hanger and Cable Box HYOSUNG 19x CO2 WELDING M/C,600A,AC440V3P60HZ 1x 3? 220V/440V 800A 14x Cable hanger 5x Cable Box Weight : 190 kg. (each welding machine) All single Cables that are shown in the pictures. Please note: This lot is subject to a buyer's surcharge of 10%, VAT might be applicable, and is sold subject to award. Make HYOSUNG Model ProPAC LH 800; ProPAC 600 Type Welding Machine Year 2007 Capacity 800A; 600A

Ytterbium Fiber Laser IPG LASER GmbH YLP-0.5-100-20-10-HC Operating voltage: 24 V DC current consumption: max. 6A approx. 5.0 m laser connection cable approx. 0.8 m power cable Dimensions ( control unit, without cable ): 290 x 215 x 100 mm dimensions ( laser head, without cable ): Ø 35 / 48 / 34 / 26 mm, Length: 115 / 85 / 6 / 38 mm New ! Dimensions ( packaging ): 670 x 410 x 200 mm

Max. Laser power: 400W, operating hours: 28. 200h, with WinLas laser programming software, storage option for 99 laser programmes Optical setup for one laser light cable with fast switch (50ms switching time), optical setup can be extended to a maximum of 4 laser light cables, pilot laser with plasma sensor holder, Control of the pilot laser via laser operating software, beam guidance and shaping, LLK-B 06 laser light cable, length 40m, fibre diameter 600mm, suitable for robots, BEO 7000210p processing optics for laser welding, lens with focal length 200mm, Protective glass cassette for easy replacement of the protective glass, collimation 0° with defocussing and observation by camera, CCD camera, b/w monitor, adjustable crosshairs, camera supply cable, 30m long, and BNC video cable, 10m long, optics protection by Laval Crossjet, Design of the robot cell with suspended robot, KUKA KR 30 ...

Robust diesel generator with soundproofing on sled. 3-phase generator with harmonized arousal. Technical data: - Rated power 30 KVA - Diesel 495D, 4 cylinder water-cooled, 33.0 kW/45 hp - Consumption average 258 g/kWh - Electric start - Current 43.3 A - Frequency 50 Hz - Voltage 220V/3x400V - Cable outlet 40A with 20 m PUR cable 3PNE, circuit breaker 3phase, Operating hour counter - ATS (Automatic Transfer Switch) with automatic start repetition, Activation of the current cover, automatic shutdown in case of lack of oil pressure, Overheating, excessive speed - slide with 4 lifting eyelets, length approx. 2300mm, width approx. 1300 mm, height approx. 1600 mm, Weight approx. 900 kg Option at extra cost: - Distributor swells with suitable sockets at the end of the cable - Suspension Warranty: 2 years on all non-wear parts or 2000 operating hours, which is m ...

Very ADDAX underground cable machine / New The cut range of 10 - 160 mm PVC, rubber, iron and lead cables can be processed. Drive: 15 hp/11 KW Weight: 1.3 T New ADDAX subterranian cable stripper can be used for cables with diameter of 10-160 mm out of pvc, rubber,iron and lead. Drive: 11 kw / 15 hp Weight: 1.3t Every time we have 12 different cable strippers on stock. New and second hand machines

Pump vacuum cleaner with integrated submersible pump that continuously pumps absorbed liquids out of the container, RCDs in the mains connection cable, special filter bags, application-oriented accessories. The pump can be completely removed and the container closed, so this industrial vacuum cleaner can also be used as a normal wet-dry vacuum cleaner. Areas of application: Suction/suction of large quantities of liquid, use in floods, use in flat roof renovation, cleaning of garden ponds and pool facilities. SCOPE OF DELIVERY Including accessory set pump vacuum cleaner. Additional filter 1 x FSS 1200 (foam) Filter bag 1 x FSN 80 1 x Suction hose Ø 35 mm x 5 m 1 x Drain hose Ø 33 mm x 5 m 1 x Handle tube plastic with secondary air slider 2 x Suction pipe plastic (each 50 cm) 1 x Aluminium professional floor nozzle 45 with rubber and briste strips EQUIPMENT Main filter FPP ...

X working range max .: 3000 mm Y Working range max .: 1500 mm Z working range max .: 115 mm Control: Siemens Sinumerik 840 D SL Laser power: 5000 W Plate thickness St. Max .: 25 mm Plate thickness Va. Max .: 20 mm Plate thickness Al. Max .: 15 mm Standard configuration Machine - Working range in 3000 x 1500 mm - Closed machine - Integrated cabinet - Automatic pallet changer in longitudinal direction - Torque drive in combination with direct linear drives - Enclosed beam delivery via fiber optic cable laser light cable - Chiller for machine cooling - Integrated electrical cabinets with inside light - Power supply for TruDisk by the machine - Conveyor belt for small parts / slug - Work area lighting - Positioning laser diode - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning TRUMPF laser - Solid-state laser TruDisk 5001 with 1 laser output -  ...

Portable welding transformer make VARIAMP type VC 180Machine -No: OC170491 Year 1991Technical specifications:Power range at 220 V: 60 - 130 APower range at 380 V: 60 - 180 A.ED at 220 V / 80 A: 50%ED at 220 V / 120 A: 35%ED at 380 V / 180 A: 35%Working voltage: 20 - 26 VOpen circuit voltage: 48VWeight approx: 32 kgExternal dimensions approx: 340x200x300 mmWith- Ground cable with screw clamp- Electrode holder with earth cable- Plug-in cable for 220 + 380Vused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

specifications: - Welding current 315 A 80% ED - 280 A 100% ED - Welding current adjustable from 50 A to 315 A - Current consumption 400 V / 19.5 A / 10.7 kVA - with: - E.- welding cable - Ground cable - Connection cable - Space requirement approx. W 600 x H 900 x D 1000 mm - Weight approx. 200 kg

specifications: - Welding current 315 A 80% ED 280 A 100% ED - Welding current adjustable from 50 A to 315 A - Current consumption 400 V / 19.5 A / 10.7 kVA - with: - E.- welding cable - Ground cable - Connection cable - Space requirement approx. W 600 x H 900 x D 1000 mm - Weight approx. 200 kg

specifications: - Welding current 300 A 60% ED - 230 A 100% ED - Welding current adjustable from 10 A to 300 A - Current consumption 400 V / 19.5 A / 10.7 kVA - with: - E.- welding cable - Ground cable - Connection cable - Space requirement approx. W 600 x H 900 x D 1000 mm - Weight approx. 180 kg

Mobile Solar Power MS-2000 (Ref. No. 504-2626) Battery capacity: 600'000 A/h, or 2'220 W/h Power: 2'000W, max. 5'000W Battery Type: ternary lithium-polymer battery Size: 320x230x335mm Adapter: DC 25.5V/8A, 204W max. Solar Power: 18V 10A 180W Recommended design: 100W 17.6V, 5.68A solar panel Direct charging DC: 12V 4.5A AC output: 220V 50Hz/110V 60Hz AC output 3 ports: 2000W, max 5000W Connections: USBX2:5V, 3.1A max. QC3.0X1:5V/3A,9V/2A,12V/1.5A DC output: 12V, 7A max. PD type-C X1: PD 60W, 5V/3a, 9V/3a, 12V/3a, 15V/3a, 20V/2.2A (bidirectional) Cigarette lighter 13V / 10 MS-SP200/200W 200W solar panel as portable power plant 2000W, MS-SP200/200W Peak Power : 200W Efficiency of the cells: MONO >19% Cable length: 2M/14AWG Output : 19V Material: PET+EVA+Solar cell+EVA+PCB+Nylon Color: Black & Orange AC input power supply Vehicle Charger Cable DC 100W ...

Stud welding machine KÖCO KÖSTER & CO. Type 601 E Fabr. No. 5356 Year of construction approx. 1995 Maximum welding current 600 Amp. Welding power at 3% d.c. 600 Amp. Welding power at 100% ED 100 Amp. Bolt diameter 3-8 mm Maximum welding time 550 ms Mains connection 400 volts, 50 Hz, 16 Amp. Plug - Welding current adjustment infinitely- Welding time adjustment infinitely variable - Welding gun KÖKO K14 with stroke ignition with 2 meter connection cable- 2 pieces of ground cable with 5 meter connection cable - Welding gun equipped with bolt holder for 5 mm threaded bolt Space requirement L x W x H 850 x 300 x 350 mm Weight complete 52 kg good condition; used

Machine type: welding rotary table Make: Merkle / Conzelmann Type CD 50/25 - 320 Connection voltage 1 x 230 V Speed range 0.25 – 2.5 rpm, infinitely variable Speed control 1 : 10 Torque 2.5 – 10 Nm Face plate diameter 250 mm Face plates - internal passage 10 mm Tilt angle of the face plate 135° Vertical load capacity 0.5 kN = 50 kg Table height 320 mm Tilting movement manual, clampable Tipping torque 90 Nm Pantograph 400 A 80 % d.c. Connection for - foot switch simple - Double foot switch - Foot remote control Age 3 years Condition: as good as new Weight 44 kg Warranty 24 months from the date of delivery Original price €2,198.00 + VAT Offer price €1,690.00 + VAT Foot switch simple with 3 mtr. cable 239.00 € + VAT 019.0.2900 Double foot switch with 3 mtr. cable 389.00 € + VAT 019.0.2901 Foot remote c ...

Machine type welding rotary table Brand MERKLE Type D 150 touch Supply voltage 1 x 230 V Speed range 0.05 – 10 rpm, infinitely variable Speed control 1 : 200 Torque 15 – 50 Nm Face plate diameter 400 mm Face plates - inner passage 60 mm Tilt angle of the face plate 135° Vertical load capacity 150 kg/1.5 kN Table height 750 mm Tilting movement manual, clampable and snap-in Tipping torque 130 Nm Pantograph 400 A at 80 % ED Connection for - foot switch single or double - Handheld remote control - Foot remote control Age 6 months Condition as good as new Weight 65 kg Warranty 24 months from date of delivery List factory price ex stock 3.550,00 € + VAT incl. surcharges Price kpl. ex warehouse Munich 2.890,00 € + VAT Foot switch simple with 3 mtr. cable 225,00 € + VAT 019.0.2900 Foot switch double with 3 mtr.  ...

Technical parameters Laser power 1000 W Laser source type optical fibre Source manufacturer MAX Photonics Length of laser waves 1064 nm Weldidng speed 0-120 mm/s Input current 230V 50Hz Kit includes: - Automatic wire feeder -Cooler 24 month warranty You will find no hidden costs with us We always present the final amount on sales quotes if the contract is signed within the quote valid period. We always evaluate shipping costs from our warehouse in Poland. B8a32e7mlf Laser welder LWH-1000-N The kit includes: - laser welder with cooling system - welding gun with adjustable focal length and set of accessories - fiber laser source MAX Photonics - Automatic Wire Feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 1000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 230 H ...