cable used for sale

Fanuc LR Mate 100i High Speed Robot with Control It is a five-axis, modular, electrically servo-driven robot designed for loading and unloading precision machines, welding and material transport. Its hollow joint construction encloses the entire cable routing to avoid getting stuck. The FANUC LR Mate 100i also features brushless AC servo motors that minimize motor maintenance, sealed bearings and drives enable operation in harsh factory environments. Included in delivery is the control unit Mate RJ-2 Robot Specifications Axles: 5 Payload: 3kg H-reach: 620 mm Repeatability: ±0.04 mm Robot mass:32kg Movement speed of the robot J1 180 °/s (3.14 rad/s) J2 180 °/s (3.14 rad/s) J3 225 °/s (3.93 rad/s) J4 216 °/s (3.77 rad/s) J5272 °/s (4.75 rad/s) Robot Motion Range Robot J1 ±160° J2 +150° - 35° J3 +206° - 159° J4 ±120° J5 ±200° (Changes and e ...

Machine type TIG inverter welding system gas-cooled DC and AC system Alphaforce brand Type W-160 AC/DC Connection voltage 1 x 230 Volt Setting range 5 – 160 amps Duty cycle 30 % ED at 160 Ampere 60% ED at 100 amps 100% ED at 90 amps Current adjustment infinitely variable weldable material thickness 4 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 485 x 240 x 435 mm Weight 22 kg Special accessories connection for foot remote control Age 6 months Condition workshop tested as new incl. UVV test protocol Scope of delivery welding system with the following accessories 1 pc TIG burner Alphaweld SR-17, 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 1 pi ...

Machine type TIG inverter welding system gas-cooled DC and AC system Alphaforce brand Type W-200 AC/DC Connection voltage 1 x 230 Volt Setting range 5 – 200 amps Duty cycle 25 % ED at 200 amps 60% ED at 110 amps 100% ED at 90 amps Current adjustment infinitely variable weldable material thickness 5 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 485 x 240 x 435 mm Weight 22 kg Special accessories connection for foot remote control Age 6 months Condition workshop tested as new incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner Alphaweld SR-26, 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 1  ...

1 pc flame pretreatment system with electronic control 1 pc EF 600-1 Burner control consisting of Electrical control with ignition and monitoring device for 1 pc burner, control electronics, control panel with plain text display, Emergency stop setup and interface for external control Mechanical control with Safety valves, gas/air mixers, thermoanemometrial mass flow meters for air and gas, Engine valves, pressure monitors for overpressure and vacuum monitoring and supply air blowers. 1 pcs C24-2300 Film burner, 2200 mm working width, adjustable up to min. 1000 mm with connections for water cooling and water-cooled double T-beam 1 pc spare parts consisting of 2 earth replacement electrodes and 1 replacement fabric Power supply : 400/230 V 50 Hz, 2.5 kVA Gas supply : Natural gas 75 – 100 mbar Heat output : max. 400 kW Gas consumpt ...

DYNAJET 500th HELI ATC RC INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! The mobile and universally applicable dynaJET cold and hot water high-pressure cleaner In addition to its user-friendliness, 500th with up to 500 bar working pressure is characterized in particular by its low weight, compact dimensions and high level of performance and safety. Construction 1-axle chassis with pneumatic tyres for easy manoeuvring on site Self-supporting and indestructible framework for weight optimization Crane eyelet for easy transport and handling Underrun protection for additional safety Frame in dip painting technology for high corrosion protection and highest surface quality Targa concept with separation between unit side and operating side f ...

Turning diameter: 1400 mm Turning height: 600 mm Chuck diameter: 1400 mm Number of chucks: 1   CNC Brand: Fagor CNC Model: 8055 MACH-id    3988 MAKE         Hegenscheidt Germany TYPE           RQ YEAR          Overhauld 2006 SPECIFICATIONS Controll    Fagor 8055 Max. turning diamter Ø    1400 mm Table / chuck size Ø     1400 mm Workpiece height     600 mm Work piece weight    2000 Kg Singel column or double column   Single column Spindle speeds / ranges   2 steps - 224 Rpm Power   50 Kw DIMENSIONS Length    3800 mm Width      3500 mm Height     3500 mm In 2006 Rebuild:Control Fagor 8055 CNC Rittal Electric cabinet New cable  ...

TECHNICAL SPECIFICATIONS Manufacturer: IBAG Designation: Horizontal sieve Type: 5500 x 2000 Design: 2-piece longitudinal tensioner Number of screen decks: 2 Year of construction: 1974 Screen covering: Steel screen mesh Weight: approx. 7 t Drive cable: no drive available SPECIFIC COMMENT - Incl. outlet tray and trigger belt (if desired) - Incl. approx. 30 steel screen coverings - Robust steel construction If you are interested, we can send you an offer with photos. EuroConsult Dimitrios Piretzidis TECHNICAL SPECIFICATIONS Manufacturer: IBAG Description: Horizontal screen Type: 5500 x 2000 Design: 2-piece longitudinal tensioner Number of screen decks: 2 Year of manufacture: 1974 Screen deck: steel screen cloth Weight: approx. 7 t Drive: no drive available SPECIFIC COMMENT - Incl. discharge trough and discharge conveyor (if required) - Incl. approx.  ...

McIntyre 150 Shear Designed as a low-cost answer to metal cleaning, an ordinary 13amp socket and suitable bench are all you need to put the 150 shear through its paces Versatile The McIntyre 150 Shear is ideal for all lighter metal shearing, but is powerful enough to tackle gun metal valves, bath taps, cable and other non-ferrous cleaning operations. The McIntyre 150 Shear is small enough to be moved easily around the yard and will be a versatile addition to any size of yard. Our company can provide it with short delivery time.

Cold water high-pressure cleaner with 4 kW power 170 bar pressure and 14 l/min. Connection: 400 V; 50 Hz; 16 A Equipment: - Stainless steel frame - Powerful motor with long service life - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 25 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Water inlet temperature up to max. 60° (standard) - 10 m power connection cable - Automatic stop system Standard accessories: - 10m high pressure hose DN6, kink protection on both sides - HDP350 high pressure gun - High-pressure jet pipe with nozzle Optional (additional cost): - Hose reel with 15 m hose The images c ...

Roller spreader for rear mounting, drive via a 12 volt electric motor with overload protection (8 A). Container contents 120 ltr. , cam roller with interchangeable, asymetric cams (suitable for sand, salt and shards or granules)Roll width 125 cm, stirring shaft to prevent lump and bridge formation, low-wear 10-stage scattering volume regulation by adjustable spring bottom with rubber apron. With grating for accident protection and cable remote control (start/stop). Without growers! Scattering length salt approx. 5-6 km, sand approx. 1 km (manufacturer specifications) Built in 2012, unused, technically and visually as new condition, here and there paint somewhat repelled. Other roller spreaders, also trailers, self-loaders, drive hydraulic, PTO shaft or wheel stock. Winter service technology of all kinds, also slingshot spreaders, snow shields, snow blowers, tractors and used compon ...

Capacity: 8.4 m3/h Operating pressure test 13 bar Engine: 3.5 kW - With connectors: DN 65, DN 50, DN 65 - With chassis mobile 2 steering and 2 buck wheels - With cable and CE plug 16A Dimensions and weight: Length: 2200 mm Width: 500 mm Height: 1080 mm Note: Pump 100% tested, with functional guarantee On request, it can be infinitely adjusted with frequency inverter for additional costs. Connections can be changed at an additional cost.

DYNAJET 500me/30 basic - 400V/50Hz Cold Water Pressure Washer INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! The DYNAJET 800me is the world's first device with 800 bar working pressure and dry-closing gun without control cable. In addition to its high performance, the Professional high-pressure cleaners above all due to their compact dimensions and high mobility. Construction - Robust, powder-coated steel frame for optimum machine protection and long service life - High durability due to screw connections made of stainless material - Crane eyelet for easy transport and handling - Splash water resistant (IP54) control cabinet for versatile and smooth use - Operating hours counter for optimal post-calculation Drive - Automatic star/ ...

Circle rotary pump Capacity: 2,0 m3/h Capacity: 2,0 m3/h Pressure 0,8 bar Motor: 1,1 kW - With connections: inlet: DN 40 outlet DN 40 - With chassis mobile with 2 steering and 2 fixed wheels - With cable and CE plug 16A Measurements and Weight: Length: 1100 mm Width: 620 mm Height: 1100 mm Comment: the pump is tested, 100% functions guarantee! On request with an additional variable rate variable speed drive. Connections can be changed at extra cost.

DYNAJET 1000me - 400V/50Hz/63A Cold Water Pressure Washer INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! The DYNAJET 800me is the world's first device with 800 bar working pressure and dry-closing gun without control cable. In addition to its high performance, the Professional high-pressure cleaners above all due to their compact dimensions and high mobility. Construction - Robust, powder-coated steel frame for optimum machine protection and long service life - High durability due to screw connections made of stainless material - Crane eyelet for easy transport and handling - Splash water resistant (IP54) control cabinet for versatile and smooth use - Operating hours counter for optimal post-calculation Drive - Automatic star/tria ...

New device incl.pre and combined filters The compact device offers many areas of application - the filters used are characterized by a long service life - the two filter cassettes separate dust, fine dust and gases - Dimensions 1197 x 600 x 790mm - Suction capacity 1250m³ / hour -400v ph 50/60Hz with red 16A CE plug - Hose connection 125mm Ø - incl. option external start / stop ( with 24V DC via 2-wire cable on the back side ) to activate via micro switch - Warranty 12 months ( filter excluded ) Typical applications : Marking laser Engraving laser Cutting lasers Options: - Suction hose in the necessary length - Connection sleeves - Suction nozzles

Type: FPE 3522 Capacity: 200 l/min Operating pressure test 4.5 bar Engine: 4 kW - With connectors: suction side DN 50 and print side: DN 65 - With chassis mobile 2 steering and 2 buck wheels - With cable and CE plug 16A Dimensions and weight: Length: 500 mm Width: 480 mm Height: 1000 mm Note: Pump 100% tested, with functional guarantee On request, it can be infinitely adjusted with frequency inverter for additional costs. Connections can be changed at an additional cost.

Slow-running robust single-shaft shredder Suitable for the pre-shredding of various materials without solid stuttering materials. Application: Crushing of industrial and commercial materials, films, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, mixed plastics for thermal and recyclable recycling, loose or pressed into bales. Lindner Jupiter 3200 Drive power: 2x 160 kW (Schorch motors) Sieve perforation: Sieving 148 mm Control cabinet: complete with ( FUe -P-Drive) Opening: 3190 x 1750 mm Single volume: approx. 8 m3 Rotor length: 3190 mm Rotor flight circle: 745 mm Rotor speed: 50Hz : 58 rpm Number of rotor blades: 36 pieces Knife dimension, pointed knife: 145x 145 x 47 mm Geggenmesser unten: 9 pieces Scraper comb above: 9 pieces Hydraulic feed: 11 kW Weight: approx. 38 t Dimensions LxWxH mm: 6250 x 3260 x 3090(H=4900 m ...

DYNAJET 500th HELI Blue Performance INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! For purchase: Including 1st UVV WITH arrival and maintenance (plus spare parts) on the same date (value approx. 1,500 net). The mobile and universally applicable dynaJET 500th cold and hot water high-pressure cleaner with up to 500 bar working pressure is characterized not only by its user-friendliness but also by its low weight, compact dimensions and high performance and safety level. Construction: • 1-axle chassis for easy manoeuvring • Self-supporting and indestructible framework for weight optimization • Central crane eyelet for optimal transport in hard-to-reach places • Frame in dip painting technology for high corrosion protection and hi ...

DYNAJET 1000me - 400V/50Hz/63A Cold Water Pressure Washer INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! World's first 1000 bar high-pressure cleaner without control cable and with dry-closing Pistol. The new DYNAJET Trolley 1000 me combines the greatest possible ergonomics and maximum strength for concentrated efficiency. This makes DYNAJETten even more environmentally friendly, more efficient and safer. Construction - Robust, powder-coated steel frame for optimum machine protection and long service life - High durability due to screw connections made of stainless material - Crane eyelet for easy transport and handling - Splash water resistant (IP54) control cabinet for versatile and smooth use - Operating hours counter for optimal  ...

DYNAJET 800me - 400V/50Hz/63A Cold Water Pressure Washer INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! The DYNAJET 800me is the world's first device with 800 bar working pressure and dry-closing gun without control cable. In addition to its high performance, the Professional high-pressure cleaners above all due to their compact dimensions and high mobility. Construction - Robust, powder-coated steel frame for optimum machine protection and long service life - High durability due to screw connections made of stainless material - Crane eyelet for easy transport and handling - Splash water resistant (IP54) control cabinet for versatile and smooth use - Operating hours counter for optimal post-calculation Drive - Automatic star/trian ...

Cold water high-pressure cleaner with 7.5 kW output - 270 bar pressure and 15 l/min. Including Hotbox 300bar Connection: 400 V; 50 Hz; 16 A Equipment: - Stainless steel frame - Powerful motor with long service life due to low speed - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 38 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Lance holder on the left and right side of the device - Water inlet temperature up to max. 60° (standard) - Chemical suction as standard for devices up to 21 l/min at 200 bar - 10 m power connection cable, 16 A plug Standard accessories: - 10m high pressure hose DN10, kink protect ...

Cold water high-pressure cleaner with 4 kW output - 170 bar pressure and 14 l/min. Including hotbox up to 200 bar. Connection: 400 V; 50 Hz; 16 A Equipment: - Stainless steel frame - Powerful motor with long service life due to low speed - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 38 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Lance holder on the left and right side of the device - Water inlet temperature up to max. 60° (standard) - Chemical suction as standard for devices up to 21 l/min at 200 bar - 10 m power connection cable, 16 A plug Standard accessories: - 10m high pressure hose DN10, kink p ...

Cold water high-pressure cleaner with 2.2 kW output - 150 bar pressure and 8 l/min. Including hotbox up to 200 bar. Connection: 240 V; 50 Hz; 10 A Equipment: - Stainless steel frame - Powerful motor with long service life - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 25 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Water inlet temperature up to max. 60° (standard) - 10 m power connection cable - Automatic stop system Standard accessories: - 10m high pressure hose DN6, kink protection on both sides - HDP350 high pressure gun - High pressure jet tube with nozzle 030 Optional (additional cost): -  ...

Cold water high-pressure cleaner with 7.5 kW power 150 bar pressure and 30 l/min. Connection: 400 V; 50 Hz; 16 A Equipment: - Stainless steel frame - Powerful motor with long service life due to low speed - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 38 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Lance holder on the left and right side of the device - Water inlet temperature up to max. 60° (standard) - Chemical suction as standard for devices up to 21 l/min at 200 bar - 10 m power connection cable, 16 A plug Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - HDP350 ...

Rolling barrel for deburring and polishing sensitive parts. The roller barrel was newly constructed from beech wood, Electricals with safety shutdown retrofitted. Connection cable with 16 A CEE plug

Residual item material from inventory sale for solar free-surface plant Screws, nuts, cable clips, washers, mid and end terminal profiles Package price

Cold water high-pressure cleaner with 7.5 kW power 150 bar pressure and 30 l/min. Connection: 400 V; 50 Hz; 16 A Equipment: - Stainless steel frame - Powerful motor with long service life due to low speed - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 38 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Lance holder on the left and right side of the device - Water inlet temperature up to max. 60° (standard) - Chemical suction as standard for devices up to 21 l/min at 200 bar - 10 m power connection cable, 16 A plug Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - HDP350 ...

NEW - Unused stock from industrial hall packed in original wooden box Offer valid for acceptance of 115 pieces - partial quantities possible Manufacturer: Coat plates with ventilation slots aluminium natural, upper ribbed and lower end part made of cast aluminium. Aluminum reflector open, removable. VG with thermal protection element and. if necessary, ZG with automatic shut-off installed. 4 Cable entries M20. Connections inside, large side connecting door. Central threaded bolt M10 for ceiling sheet or hanger. Lamp: HST-DE, 400 W Number of lamps: 1-lamp Material of the housing: Aluminium Case color: Aluminum Lamp power: 1 x 400 W System power: 440 W Protection class: I Degree of protection (IP): IP20 Control unit VG, Length: 536 mm Width: 536 mm Height: 692 mm max. weight: 13.8 kg 230 V - 240 V AC

E. - Chain hoist / hoist Offer number: 20056 Make: DEMAG Type: PK 1 N-F Machine number: 2388876 Built: 1978 Technical data: - Load capacity 250 kg - Lifting height - chain path approx. 2 m - 2 lifting speeds 1 + 4 m/min - top-sided hanging hoe - Operation of the chain hoist via hand remote scanner - Cable length hand remote scanner approx. 1.5 m - Drive 400 V - Weight approx. 20 kg

Cold water high-pressure cleaner with 7.5 kW power 270 bar pressure and 15 l/min. Connection: 400 V; 50 Hz; 16 A Equipment: - Stainless steel frame - Powerful motor with long service life due to low speed - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 38 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Lance holder on the left and right side of the device - Water inlet temperature up to max. 60° (standard) - Chemical suction as standard for devices up to 21 l/min at 200 bar - 10 m power connection cable, 16 A plug Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - HDP350 ...

The FDR D-EVO Suite is the flexible entry-level DR system. Optionally, one, two or even three wireless detectors can be used. The batteries can be charged via a charging station or an optional cable, so you have a ready-to-record detector at all times. (Source: Fujifilm.eu) Used system from a clinic and is equipped with a digital detector system. In very good technical and optical condition.

Cold water high-pressure cleaner with 7.5 kW power 270 bar pressure and 15 l/min. Connection: 400 V; 50 Hz; 16 A Equipment: - Stainless steel frame - Powerful motor with long service life due to low speed - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 38 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Lance holder on the left and right side of the device - Water inlet temperature up to max. 60° (standard) - Chemical suction as standard for devices up to 21 l/min at 200 bar - 10 m power connection cable, 16 A plug Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - HDP350 ...

Cold water high-pressure cleaner with 2.2 kW power 150 bar pressure and 8 l/min. Connection: 240 V; 50 Hz; 10 A Equipment: - Stainless steel frame - Powerful motor with long service life - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 25 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Water inlet temperature up to max. 60° (standard) - 10 m power connection cable - Automatic stop system Standard accessories: - 10m high pressure hose DN6, kink protection on both sides - HDP350 high pressure gun - High pressure jet tube with nozzle 030 Optional (additional cost): - Hose reel with 15 m hose The imag ...

READY TO SHIP Conveyor belt conveyor belt conveyor Alu conveyor belt different versions available: 6m, 4.5m, 3.3m length (longer distances on request) For rent included: - Mobile conveyor belt - Removable chassis - Connection cable Our conveyor belts are light, handy and powerful! For the rapid removal of e.g. earth, construction debris, etc. Transport up to 300 tons of material per day! For RENT and BUY, prices on request. Material can be visited, from Mon-Fri 8am-4pm. Transport on request, also self-collection possible (loading at our warehouse FREE) Please also take note of our other offers ! Rent formwork, containers, scaffolding and many more from LERCH!

READY TO SHIP Conveyor belt conveyor belt conveyor Alu conveyor belt different versions available: 6m, 4.5m, 3.3m length (longer distances on request) For rent included: - Mobile conveyor belt - Removable chassis - Connection cable Our conveyor belts are light, handy and powerful! For the rapid removal of e.g. earth, construction debris, etc. Transport up to 300 tons of material per day! For RENT and BUY, prices on request. Material can be visited, from Mon-Fri 8am-4pm. Transport on request, also self-collection possible (loading at our warehouse FREE) Please also take note of our other offers ! Rent formwork, containers, scaffolding and many more from LERCH!

Machine type TIG inverter welding system gas-cooled DC system Make Merkle Type MobiTIG 190 DC Connection voltage 1 x 230 volts Adjustment range 5 - 190 ampere Switch-on time 20% ED at 180 amperes 100% ED at 90 amperes Current adjustment infinitely variable max. weldable material thickness 5 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Fuse 16 Ampere Dimensions L x W x H 355 x 160 x 275 mm Weight 9 kg Age 6 months Condition workshop-tested, very good, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece TIG burner 4 mtr. Long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare part box kpl. Equipped 18 month warranty 1 piece user manual New price €1,590.00 + VAT Price kpl. wi ...

Cold water high-pressure cleaner with 15 kW output 380 bar pressure and 21 l/min. Connection: 3 x 400 V; 50 Hz or 3 x 460 V; 60 Hz.; 32 A Equipment: - Epoxy coated steel frame - Stainless steel cover - Compact, narrow chassis with stop function - Crane lifting device - Triplex high-pressure pump - Water inlet temperature max. 60°, thermal valve - Main switch with emergency stop function - Soft automatic start-up - Grid monitoring (phase control and undervoltage) - Connection cable 5.0 m with 32 A plug (50 Hz/60 Hz) - Water inlet filter Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - High pressure gun with isotube - Double jet tube and high pressure nozzle 030 Special equipment (included in the price): - Automatic start-stop with flow switch and switch-off delay 30 seconds - Water inlet filter 10" with sand filter insert and ...

Trackball with connection cable for Ultimax control Replacement for Hurco Ultimax 4 , Ultimax 3 Easy to change, ready to ship New

DYNAJET 500th HELI ATC RC INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! For purchase: Including 1st UVV WITH arrival and maintenance (plus spare parts) on the same date (value approx. 1,500 net). The mobile and universally applicable dynaJET cold and hot water high-pressure cleaner In addition to its user-friendliness, 500th with up to 500 bar working pressure is characterized in particular by its low weight, compact dimensions and high level of performance and safety. Construction 1-axle chassis with pneumatic tyres for easy manoeuvring on site Self-supporting and indestructible framework for weight optimization Crane eyelet for easy transport and handling Underrun protection for additional safety Frame in dip painting technology  ...

working range without repositioning X: 2500 mm working range Y: 1270 mm Control: Bosch PNC-P Punch power: 165 KN Laser power: 3000 Watt Plate thickness max.: 6 mm Standard configuration Machine - Working Range 2500 x 1270 mm - Stable C-frame for easy access - Coordinate guide for high precision machining - Linear magazine with 19 tool stations including and 2 clamps - Drives with maintenance-free 3-phase servo motors - Repositioning unit with programmable stripper - Brush tables - Parts chute 300 x 500mm - Chip container - Good parts container - Enclosed beam delivery via fiber optic cable - ContourLine - FocusLine - NitroLine - Seperate main switch machine and laser Punching head - Hydraulic punching head - Programmable presser foot - Tool length compensation - Spray lubrication for punches - Vacuum slug removal - forming Control - Open controller based on ...

Cold water high-pressure cleaner with 15 kW output 380 bar pressure and 21 l/min. Connection: 3 x 400 V; 50 Hz or 3 x 460 V; 60 Hz.; 32 A Equipment: - Epoxy coated steel frame - Stainless steel cover - Compact, narrow chassis with stop function - Crane lifting device - Triplex high-pressure pump - Water inlet temperature max. 60°, thermal valve - Main switch with emergency stop function - Soft automatic start-up - Grid monitoring (phase control and undervoltage) - Connection cable 5.0 m with 32 A plug (50 Hz/60 Hz) - Water inlet filter Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - High pressure gun with isotube - Double jet tube and high pressure nozzle 030 Special equipment (included in the price): - Automatic start-stop with flow switch and switch-off delay 30 seconds - Water inlet filter 10" with sand filter insert and ...

Hot water generator KENT Duo HotBox 500 bar Description: - Working pressure: up to 500 bar - Flow rate: 2 x 11-56 L/min. - Burner: oil / approx. 90 KW - Tank: approx. 20 L - incl. Automatic Start/Stop Flow - incl. flame control - incl. operating hours counter - Chassis: Black lettered - Hood stainless steel Features: - Powder-coated frame with stainless steel cover - 4 wheel chassis with solid rubber tires - fan motor, - Oil pump - KENT burner boiler with approx. 90 KW heating capacity - Automatic switch-off start-stop flow controlled - incl. E-connection cable - Water inlet temperature max. 60°C Scope of delivery: - Inlet hose Dimensions: (L x W x H in mm) 1000 x 680 x 760 Weight: approx. 190 Kg Shipping possible. Prior sale and error excepted. The terms and conditions of Cleantec-MR apply.

-High performance -Belt grinding device height-adjustable 0-90° -Maximum usable face grinding surface -Belt adjustment with fine adjustment -Combined belt grinding/grinding machine -Longitudinal stop for material guidance -Perfectly balanced and low vibration -Double-sided connection for dust extraction Ø 50 mm -Motor circuit breaker with undervoltage trigger -Fixed stop -1 sanding belt standard (brown), grain 80 -1 grinding wheel 250 x 40 x 51 mm, grain 80 -Spark protection -Connection cable with CEE plug -with machine stand, EMERGENCY STOP push button, brake and suction Delivery: in Germany free domicile incl. packaging

Edge gluing machine Brandt Type: KTD 14 Built: 1996 Edge gluing machine with direct glue indication for gluing Edge materials on straight workpieces. Processing units: Install Glue indication Roller separation Flush milling Caps Workpiece thickness 10 - 40 mm Edge material thickness 0.4 - 1.2 mm Workpiece width min. approx. 50 mm Workpiece length min. approx. 260 mm Feed 6 m/min. Operating voltage 400 V+/- 10% - 3 Ph - 50 Hz Heating capacity 1.2 kW Connection value 3.04 kW Electrical connection cable length approx. 4.5 m Compressed air connection 7 bar Operating pressure 6 bar Weight: approx. 150 kg Space requirement: approx. 1800 x 1600 mm

Electronic Scissor Lift Fabr. TREPEL Type M-Boy 4Machine -No: 30706872, built in 1985Load capacity: 500 kgOperating pressure max.:160 barTable size: 710 x 600 mmHeight retracted: 470 mmMax. Extension height: 920 mmOperating pressure: 160 barDrive power: 1.1 kWExternal dimensions retracted: 650 x 900 x 470 mmPower connection: 380 V / 50 HzWith- Remote control with 3.0 m cable- freely installable limit switchvery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Thawing transformer make TREKOLUX type EAGYear of construction 2000for thawing frozen water pipesMax. Power: 10AThawing i. Volts - 3 levels: 2.5 / 5 / 10VThawing performance 2,5 V: 400 AMinimum pipe length for 2 pipe: 4 mThawing performance 5V: 400AMinimum pipe length for 2 pipe: 8 mThawing power 10 V: 200 AMinimum pipe length with 1 pipe: 15 mExternal dimensions L x W x H: 350 x 250 x 250 mmWith- 5 m ground cable- 20 m ground cableused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Machine type MIG/MAG welding system Make MERKLE Type RedMIG 2800 K Connection voltage 3 x 400 volts Adjustment range 25 - 280 amperes Switch-on time 30% ED at 280 amperes 60% ED at 210 amperes Current setting 14 switching stages Cooling transformer due to built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed 4-wheel drive DV 26 Fuse 16 Ampere Dimensions L x W x H 800 x 460 x 655 mm Weight 80 kg Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch 3 mtr. Long 1 piece ground cable 1 piece pressure reducer Argon with 2 pressure gauges 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece of protective glass 10 DIN 1 piece of white glass 1 piece spare part box, kpl ...

Machine type MIG/MAG welding system Make Merkle Type RedMIG 1600 K Connection voltage 1 x 230 volts Adjustment range 25 - 160 amperes Switch-on time 30% ED at 160 amperes 60% ED at 130 amperes Current setting 7 switching stages Cooling transformer due to built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed 2-roll drive Fuse 16 Ampere Dimensions L x W x H 800 x 460 x 620 mm Weight 65 kg Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 157 G, 3 mtr. Long 1 piece ground cable 4 mtr long, 25 sqmm 1 piece pressure reducer Argon with 2 pressure gauges 1 roll of welding wire, D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece of lens 90 x 110 mm white 1 piece of protecti ...

Machine type MIG/MAG welding system Make MERKLE Type RedMIG 2000 K Connection voltage 3 x 400 volts Adjustment range 25 - 200 amperes Switch-on time 30% ED at 200 amperes 60% ED at 140 amperes Current setting 7 switching stages Cooling transformer due to built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed 2-roll drive Fuse 16 Ampere Dimensions L x W x H 800 x 460 x 655 mm Weight 70 kg Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch, 3 mtr. Long 1 piece ground cable 4 mtr. Long 1 piece pressure reducer Argon with 2 pressure gauges 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece of protective glass 10 DIN 1 piece of white glass 1 piece spare part box ...

Machine type MIG/MAG welding system Make MERKLE Type RedMIG 3000 K Connection voltage 3 x 400 volts Adjustment range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes Current setting 14 switching stages Cooling transformer due to built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed 4-wheel drive DV 26 Fuse 16 Ampere Dimensions L x W x H 910 x 460 x 760 mm Weight 120 kg Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch, 3 mtr. Long 1 piece ground cable 1 piece pressure reducer Argon with 2 pressure gauges 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece of protective glass 10 DIN 1 piece of white glass 1 piece spare part box, ...