cabinet used for sale

WOODEN PIGEON HOLE CABINET 12 HOLES PLEASE CONTACT : Ms. Ayu (019-99224329) Located at F20

including baseboard clamps, approximately 600 legs, cabinet fittings, etc. Auction-ID: A1-49374-294

concerns 6 boxes; consisting of cabinet660x450x1990mm; worktop wood 1320x445x23mm; case 660x450x875mm; wall cabinets 1320x330x405mm; tool rack 1320x660mmx10mm; tool storage with 4 drawers 660x450x885mm; with leveling feet: 5201 Auction-ID: A1-50091-81

including approximately 70 pairs of various drawer slides, approximately 525 various hinges, approximately 140 click plates, cabinet locks, coupling bolts, shelving supports, Auction-ID: A1-49374-271

concerns 6 boxes; consisting of cabinet660x450x1990mm; worktop wood 1320x445x23mm; case 660x450x875mm; wall cabinets 1320x330x405mm; tool rack 1320x660mmx10mm; tool storage with 4 drawers 660x450x885mm; with leveling feet: 5201 Auction-ID: A1-50091-77

Uncomplete ABB robot arm without schwitching cabinet and control panel. Auction-ID: A7-50083-2

dimensions 1 part approximately 77xH249cm, including profiles Auction-ID: A1-49374-420

with plastic roller blind, 5 shelves height-adjustable, without contents Auction-ID: A1-50085-34

with 32 pcs goblet HSK 63 tool holder carrier, roller blind front door Auction-ID: A1-50085-65

WITH 6 SHELVES (BLIND DEFECTIVE) 2 SHELVES, 2 PCS TOOL CARRIER SHELVES HSK 63 Auction-ID: A1-50085-113

with plastic roller blind, 5 shelves height-adjustable, without contents Auction-ID: A1-50085-33

with plastic roller blind, 4 shelves height-adjustable, without contents Auction-ID: A1-50085-37

: 12 St. : ca. 90 kg : ca. 710x720x1000 mm drawer measurements: 600 x 600 mm Colour: 7035/5012 RAL Cabinet including assortment of dividers Large drawer usable space Full extension drawers (VA) 100% 8 drawers with internal height 40 mm 2 drawers with internal height 70 mm, 2 drawers with internal height 95 mm, 7 drawers with tray dividers and boxes 3 drawers with rail dividers 2 drawers with foam inserts Ball bearing drawer runners Individual pull-out stop Individual locking possible for each drawer Cabinet without key! Translated with DeepL.com (free version) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The cabinet has an anthracite interior and can be mounted both left and right. The glass shelves provide a subdivision of the storage space. \"The item is sold in its current state (As-Is), and as described. The lot description is leading for the content; Any accessories, decoration or other items that are not mentioned in the description are not included in the lot.\" Auction-ID: A1-49250-225

Mirror cabinet for bathroom use from Nobel Kitchen and Bath. The mirror cabinet has two mirror doors in light oak wood decor. The cabinet is suitable for wall mounting and offers storage space behind the mirror doors. The dimensions of this model are approximately 120 cm wide, 12 cm deep and 65.3 cm high. Only what is visible in the photos is included. \"The item is sold in its current state (As-Is), and as described. The lot description is leading for the content; Any accessories, decoration or other items that are not mentioned in the description are not included in the lot.\" Auction-ID: A1-49250-157

Filter cabinet dimensions 1400x880x2100 Cabinet door automatic with air piston forklift present if desired Auction-ID: A3-46161-19019

The Ribbella is a hanging washbasin cabinet with two drawers and two cutouts for siphons. The drawers are equipped with a soft close system. The cabinet has a natural oak finish and is intended for combination with a double sink. Case has damage: see photo. The item is sold on an \"as is\" basis (As-Is), and as described. The lot description is leading for the content; Any accessories, decorations or other items depicted that are not mentioned in the description are not part of the lot. Auction-ID: A1-49250-254

1x - Primabad wall-mounted bathroom furniture executed in black wood grain. The furniture is equipped with two spacious drawers with soft-close closure. The top drawer has two recesses for washbasin siphons, making the furniture suitable for use with a double washbasin. Suitable for installation in bathrooms and sanitary areas. Excluding sink, taps, siphons and other accessories, unless available. Delivery in accordance with existing content. Product is auctioned in the condition in which it is (as-is). Auction-ID: A1-49250-46

1x - High bathroom cabinet from Sanox executed in the color Black Oak. The cabinet is suitable for wall mounting and offers storage space for bathroom items. The fronts and carcase are finished with a wood-look finish in Black Oak. Dimensions are approximately 35 x 35 x 160 cm (w x d x h). The exact direction of the doors and the internal layout must be assessed on the basis of the photos of the offered lot. Only what is visible in the photos is included. \"The item is sold in its current state (As-Is), and as described. The lot description is leading for the content; Any accessories, decoration or other items that are not mentioned in the description are not included in the lot.\" Auction-ID: A1-49250-154

1x - Primabad wall-mounted bathroom furniture executed in black wood grain. The furniture is equipped with two spacious drawers with soft-close closure. The top drawer has two recesses for washbasin siphons, making the furniture suitable for use with a double washbasin. Suitable for installation in bathrooms and sanitary areas. Excluding sink, taps, siphons and other accessories, unless available. Delivery in accordance with existing content. Product is auctioned in the condition in which it is (as-is). Auction-ID: A1-49250-47

High bathroom cabinet of unknown brand, in oak color. The bathroom cabinet has two doors that swing to the right, and contains 3 glass shelves (shelves) on the inside. In total, there are five shelves in the cabinet. CAUTION: damage to the back of the cabinet, see image \"The item is sold in its current state (As-Is), and as described. The lot description is leading for the content; Any accessories, decoration or other items that are not mentioned in the description are not included in the lot.\" Auction-ID: A1-49250-156

Lot composed mainly of electrical equipment and distribution cabinets visible in the photos: - electrical cabinet / box with circuit breakers and protections- distribution modules and control components - electrical boxes and accessories - cable drums and miscellaneous cables-Condition : second-hand, dusty / stored in the workshop, sold as is, according to photos. Note: heterogeneous lot of electrical components and cabinets, visible Legrand / Parland brands and other industrial components. Auction-ID: A1-50223-109

1x - H&R wall-mounted bathroom furniture made of light oak with wood grain. The furniture is equipped with two spacious drawers with soft-close closure. The top drawer has a recess for washbasin siphon. Suitable for installation in bathrooms and sanitary areas. Excluding sink, taps, siphons and other accessories, unless available. Delivery in accordance with existing content. Product is auctioned in the condition in which it is (as-is). Auction-ID: A1-49250-48

Bathroom furniture set from the Allibert Belli series, consisting of a washbasin cabinet, ceramic washbasin and corresponding mirror cabinet. The base cabinet is equipped with 2 handleless drawers with soft-close closure. The ceramic sink has a tap hole and overflow. The mirror cabinet is equipped with mirror doors. The set is delivered unassembled. Mounting material is included. A tap and siphon are not included. The base cabinet is intended for wall mounting. \"The item is sold in its current state (As-Is), and as described. The lot description is leading for the content; Any accessories, decoration or other items that are not mentioned in the description are not included in the lot.\" Auction-ID: A1-49250-89

: 10 St. : ca. 90 kg : ca. 1020 x550 x1185 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Content consisting of approx. 90 pieces of HSK 63 tool holders, equipped with high-quality cutting tools such as internally cooled drills, carbide end mills, reamers, taps, as well as collets and carbide drills.

Content consisting of taps, reamers, files

With a stock of drill chucks and drills, in various designs and sizes, sandpaper.

Content consisting of driven VDI 40 tool holders, approx. 10 pieces, plus approx. 48 pieces of normal VDI 40 holders and additional clamping jaws

Contents consisting of cutters, partly carbide cutters, twist drills, parallel supports

Content consisting of various measuring equipment

Contents consisting of various carbide end mills, taps, twist drills, long drills, HSS cutters, reamers.

Content consisting of various taps and reamers as well as approx. 62 pieces of HSK 50 tool holders, partially equipped with cutting tools such as taps, milling cutters, solid carbide cutters.

Content consisting of approx. 38 pieces of SK 40 tool holders, partly equipped with machining tools, as well as twist drills, indexable inserts, clamping devices, saw blades, taps.

Content consisting of approx. 98 pieces of SK 40 tool holders, mostly equipped with cutting tools such as reamers, end mills, taps, and cutter heads.

Contents consisting of various collets, clamping devices, reamers, dies, files, hand tools attention: without the Multifix tool holders seen in the photos!

Content consisting of various twist drills, taps, long drills, collets, cutter heads, as well as other workshop supplies

Contents consisting of various milling cutters, clamping devices, open-end wrenches.

Content consisting of approx. 50 pieces of SK 40 tool holders, partially equipped with cutting tools such as milling cutters and drills, as well as various clamping devices.

Content consisting of 22 pieces of SK 40 tool holders, partially equipped with machining tools, a lot of outside micrometers, reamers, twist drills in various designs and sizes, countersinks, carbide cutters, taps.

Content: consisting of approx. 82 pieces of SK 40 tool holders, partly equipped with machining tools

Contents consisting of approx. 72 pieces of SK 40 tool holders, partially equipped with machining tools such as solid carbide cutters, milling cutters, side milling cutters, and others.

Content consisting of a lot of solid carbide cutters, taps, radius cutters, reamers, twist drills.

Content consisting of screws, milling cutters, approx. 44 pieces SK 40 tool holders, partially equipped with cutting tools such as milling cutters and drills.

Content consisting of various screws in different designs and sizes.

• Consisting of two pieces • contents of various handheld tools, different manufacturers • collets, sanding belts, and grinding wheels

Content consisting of various collets and clamping jaws in different designs and sizes

Content consisting of limit plug gauges, internal micrometer as well as a marking plate with height gauge, Plate dimensions: 300 x 300 mm

Content consisting of various clamping devices in different designs and sizes, LENZKES

Contents consisting of various taps and cutters