cabinet used for sale

High speed 5 axes CNC machinning center CMS Concept 40/155/25 PX5 was built in Italy in 2020. CNC gantry milling machine characterised by outstanding robustness and reliability, is designed for precision milling, drilling and 3D machining of parts made of materials such as sand, epoxy and phenolic resin, carbon fibre, fibreglass and aluminium. Dimensioning of workpiece structures is performed by an advanced calculation programme based on the finite element method (FEM), ensuring high geometric accuracy and reliability, even under heavy workloads. Applicable to a variety of industries, the machining centre for composites and aluminium, features a mobile bridge with a PX5 5-axis workhead running on two electrically welded rigid guideways. All five interpolated axes of the head (X,Y,Z,C,A), are equipped with high-performance servomotors and pneumatic brakes. The high-speed electro-spindl ...

Used Alfa Laval decanter centrifuge model Aldec 40. New: 2007. The set includes: - decanter centrifuge - Ultromat dosing station - polymer pump - Netzsch sludge pump - centrifuge control cabinet - control cabinet of the compaction installation Technical parameters of the centrifuge: - maximum cake density 1.2 kg/dm3 - temperature 0-100 degrees C - maximum speed 4000 rpm - 2-stage planetary gear - gear max torque 2.5 kNm Gear ratio 1:159 - drum length 1460 mm - drum diameter 353 mm - cover/cover material AISI 316 - inner surface of the AISI 316 cover Centrifuge dismantled. All devices were technically efficient and in operation until dismantling.

Number of Bizerba scales: 4 pieces Power ratings: 3 x 400 V/ 50 Hz / 16 A technical documentation: available Availability: as of now composed of: - Sorting belt / separator with two Bizerba ST scales, weight range 0.04 to 6 kg, overall dimensions (L x W x H): approx. 2430 x 1530 x 1250 mm, width approx. 850 mm - simple conveyor belt (height adjustable), total length approx. 3650 mm, total width 510 mm, bandwidth approx. 250 mm - Control cabinet, control panel Siemens OP 73 (Simatic Panel), year of construction 2007 - tray dispenser, machine weight 64 kg, year of construction 2009, connected loads 230 V / 50 Hz, 16 A, overall dimensions (LxWxH): approx. 4750 x 880 x 1035 mm - Control cabinet, type GMS, year of construction 2008, operating pressure max. 8 bar, connected loads 3 x 400 V / 50 Hz / 16 A, control panel Siemens (Simatic Panel) - Sorting belt (height ad ...

used baler Manufacturer: PAAL Type: CPH 6540 Machine number: 29600 Year of construction: 2008 Main parts of the press: 1 automatic channel press 1 automatic lacing 1 hydraulic system 1 electrical control Press force at approx. 300 bar: 650 kN Duct cross-section (h x w): 75 x 100 cm Filling opening (l x w): 160 x 92 cm Number of binding wires: 4 pieces Power: - Wire pull: 3 kW - Twisting: 3 kW - Main drive pump: 75 kW Hydraulic oil tank volume: 2200 l Machine weight: approx. 14 t, depending on equipment Operating voltage: 3 x 400 VAC / 50 Hz / N / PE Press complete for continuous operation including: Machine design consisting of: - Pressure plate with roller guide mounted on the inside at the bottom, - Press box floor made of highly wear-resistant special steel, - replaceable, screwed running dies for the lower pr ...

Single-column press with 15 T power suitable for continuous shift operation (a) travel speed 10 mm downwards; b) Opening speed up to 25 mm/sec c) Starting pressing speed 10 mm/sec d) Table size 400x400 mm e) Ram size 200x200 mm, with T slots and central cylinder tension f) Total size approx. 1150x800x1750 mm g) Oil temperature display on the oil tank h) Pressure adjustment from 5 T to 17 T (adjustable via rotary control) i) Two-speed hand lever operation j) Machine body powder-coated, or double painted k) Control cabinet supply cable from above with 3000 mm cable and 16 ampere plug l) Installation, commissioning, instruction against separate charge Press type single-column press Thermally neutral 80 – 120 °C Number of operating pages 1 page Forces Pressing force max. ( at 250 bar ) 150 kN Free tear-off force max. 10 kN Pressure build-up time Closed tool Stee ...

Packaging machine Beck Fitpacker Junior FJ 1040 U - Used equipment built in 1995 - small repairs necessary The Fitpacker Junior has a high packing performance and can process products of different lengths in disorder. A programmable logic controller is located at the top of the control cabinet and is easy to handle via a logical user interface. The packer also has a feeding system, which is especially suitable for line operation. Machine changeover times are kept short by a digital operating concept and an adjustable shape shoulder. The control cabinet can be opened and swivelled so that optimal access is guaranteed in the event of maintenance and downtimes are reduced. The film roll holder is mounted at an ergonomically reasonable working height. Working speed: Actual production speed and effective net output depend on format, Type and composition of products and can ...

Net price (excl. VAT) = 33.500,- € gross price (incl. VAT) = 39.865,- € - - - - - Perkins generator set 600 / 650 kVA kVA only 70 operating hours - with control cabinet - - - - - - Manufacturer: Heinkel, Berlin - - - - - Engine: - Perkins (England) - Model: 3012-TAG2 - 12 cylinders -Turbo -Diesel -Water-cooled - 1500 rpm - - - - - Generator: - Manufacturer: VEB Elektromotorenwerk Dessau (Germany) - Power: 600 / 650 kVA - 230 / 400 volts - 50 Hertz - - - - - Switchboard: - Start button to start - Automatic start (device starts automatically in case of power failure) - Generator monitoring: volts, amps, hertz, kW, kVA - Engine monitoring: oil pressure, engine temperature, battery voltage, lack of fuel, speed, etc. - Operating hours counter: 66 operating hours - - - - - Other data: - Length: 380 cm - Width: 135 cm - Height: 215  ...

Complete gas measuring station, gas warning meter, Polytron IR Ex, Dräger, used Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! The part was purchased from a spare parts warehouse of a company, is in very good condition and fully functional. The complete gas measuring device is installed in a Rittal distribution cabinet and consists of: - Rittal distribution cabinet 60 x 30 x 80cm high - Air intake pump, IKS Group, 7006 VD 2,3/E/AC - Gas detector Dräger, Polytron IR Ex, - Brooks variable area flow meter 1355/... - Isolating amplifier Pepperl u Fuchs KFA6-SR2-Ex1.W - Circuit breaker and other accessories The air intake pump sucks in the air from the outdoor area and brings it to the Polytron gas detector Ensuring the function In order to ensure functionality, the buyer must inspect or put the goods into op ...

Full-color multi-material 3D printer J720 Dental for use in the laboratory. Very good condition., Installation space in mm (x/y/z): 490x390x200, Layer thickness: up to 14 microns, Dimensions in mm (w x h x d): Printer: 1400x1260x1100 Material cabinet: 670x1170x640, Weight in kg: Printer: 430 Material cabinet: 152, building material: Dental Materials - VeroDent (MED670) and VeroDentPlus (MED690) • Vero™ family of opaque materials, including neutral shades • Bright colors such as B. VeroCyanV™, VeroMagentaV™ or VeroYellowV™ • Tango™ and Agilus30™ product families made of flexible material • Transparent VeroClear™, digital materials: Unlimited choice of composite material, e.g. B.: • More than 500,000 colors • Material to reproduce soft tissue in various Shore A hardness levels • Transparent shades • Composite materi ...

Electric automatic inclined bed filter Cloth belt filter Gravity fleece belt filter coolant preparation 1000 mm x 1760mm with circulation pumps For cleaning liquids, waste water emulsions Cooling lubricants of suspended solids and particles, with circulation pumps Manufacturer Seperatoren- Technik und Anlagenbau GmbH Year of construction: 2016 as good as new , unused Type: E-BF 150 BOM number 021966 Machine number: 16-0002 Container capacity: approx. 550 litres Operating voltage: 3x400 V Frequency: 50 Hz Pre-fuse: A 16 max throughput: (I/min) 150 Control voltage I (V)24 DC Weight: approx. 400 kg Length: approx. 2760 mm with control cabinet Width: approx.: 1100 mm Height: approx.: 1020 mm with control cabinet Non-woven tape roll width: approx:1000 mm Non-woven tape roll Length: approx: 1760 The filter is used to clean liquids. The liquid to be cleaned runs  ...

Deck oven electric Miwe Condo CO 5.1208 used all-purpose oven stone slabs oven electric from Miwe Model Condo CO 5.1208 from year of construction 2013 tested and cleaned in stock immediately available for sale. The oven is with 5 shelves each 120x80cm with exhaust hood including steam condenser and proofing cabinet. - 5 tiers each 120x80cm - Each floor with Miwe FP control - each floor can be controlled separately - Top and bottom heat separately adjustable - each floor with separate steam function - with proofing cabinet - with steam condenser - with exhaust hood - Floor entrance height 17cm, interior height 16cm - Power: 49.1 kW - Built in 2013 External dimensions Width: 150cm Depth without hood: 132cm with hood +40cm Height without hood: 238cm with hood +20cm

CHP basic module agenitor 212 (fully mounted on steel frame with vibration decoupling) - Motor with accessories - Gas controlled system - Gas mixer -Generator -Voltage regulator - Cos-phi regulator -Clutch - Switchgear and control system - Exhaust silencer made of stainless steel CHP power field - Separate control cabinet with load switch and mains monitoring Heat exchanger cabinet, pre-piped mounted in steel frame - Heat extraction / hydraulic system - 3-way mixer emergency cooling circuit - electric circulating pump, mixture cooler - 3-way mixer mixture cooling circuit - Pressure compensation tank - Plate heat exchanger as transfer heat exchanger - electric circulating pump heating side - 3-way mixer return temperature increase Mixture cooler as table cooler Emergency cooler as table cooler to dissipate excess thermal energy. The entire thermal energy fro ...

CHP basic module agenitor 206 / 220kw/el. (fully mounted on steel frame with vibration decoupling) - Motor with accessories - Gas controlled system - Gas mixer -Generator -Voltage regulator - Cos-phi regulator -Clutch - Switchgear and control system - Exhaust silencer made of stainless steel CHP power field - Separate control cabinet with load switch and mains monitoring Heat exchanger cabinet, pre-piped mounted in steel frame - Heat extraction / hydraulic system - 3-way mixer emergency cooling circuit - electric circulating pump, mixture cooler - 3-way mixer mixture cooling circuit - Pressure compensation tank - Plate heat exchanger as transfer heat exchanger - electric circulating pump heating side - 3-way mixer return temperature increase Mixture cooler as table cooler Emergency cooler as table cooler to dissipate excess thermal energy. The entire thermal ...

Miwe Deck Shop Oven  Type: Condo CO4.0806-2D Specifications: 4 floors Year of construction: 2013 Top and bottom heat separately individually controllable digital control each floor is with stone slab each floor with steam with program memory Each floor fits 2 trays 60x40cm or 1 tray 60x80cm across Floors are equipped with lighting completely in matt black All-purpose oven for baking almost all products on stone slab, baking directly on stone slab or on trays can be moved on castors with fixed water connection for steaming Option pull-off equipment / zeroing can be purchased separately Water filter option with proofing cabinet Proofing cabinet separately controllable Pick-up and shipping on request Furnace has 18.9 kW power 400 / 230 V 3/N/PE Dimensions: Height: 212cm Width:110cm Depth: 120cm

Number of sanding units: 2 st. sanding width: 190 mm Sanding height max.: 4-150 mm Hess Junior single wood sander --------------------------------- basic structure: Stable, heavy welded construction made of thick-walled rectangular hollow profiles with additional, statically calculated bracing for optimal vibration damping. Staggered grinding units with large dimensioned Belt drive drums for slip-free belt travel. Two-point suction for direct and airborne dust extraction with integrated blow-off device. grinding units in heavy steel plate construction as the basis for vibration-damped, quiet belt run. All guides as a ball linear set on hardened and polished waves. Lasting precision thanks to protection against dust and dirt of the sphere linear sets. Contact roller and sanding pad in a balanced ratio to the grinding belt grain load. The large dimensioned drive drums guarantee the full tr ...

KRÜSI chalet construction machine / log cabin production system type CM 40 Manufacturer: Krüsi Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of construction: 1996 S/N 431 Condition: good, technically checked and cleaned / ready for use Machine description / equipped with: 1. Sawing unit: Hand feed Spindle adjustment with analogue dimension display 2. CM milling unit: Hydropneumatic feed Spindle adjustment with digital dimension display 3. Drilling unit: Hand feed Spindle adjustment with analogue dimension display 4. End milling unit Hydropneumatic feed Spindle adjustment with digital dimension display Specifications Workpiece Cutting height max. 200nn Cutting width max. 250mm Working table height 900mm Sawing unit Saw blade Ø max. / bore ø 400 / 30 mmm Tungsten carbide equipped with chip depth limiter (synchronization)  ...

Trocker in retrofit version and with new Siemes S7-1200 control cabinet with touch panel. - Producer Cefla - Year of construction 1999/2022 - Working width 1.300 mm - Number of pallets 5 Stk. - Palettenlänge 7.470 mm - Useable pallet length 7.200 mm - Max. part height ~ 50 mm - Clearance height between the pallet 60 mm - Max. part length 7.200 mm - Fresh air 3.000 - 9.000 m³/h - Exit air 3.000 - 9.000 m³/h - Heat output ~ 45 kW - Drying temperature 30 Grad (optional 60) Grad - Incl. heat exchanger - Feed speed infinitely adjustable 2 - 10 m/min - Suitably for water based lacquer - Suitably for solvent based lacquer - Length 9.600 mm - Width 3.300 mm - Height 2.650 mm + 900 mm - Location, in stock - Voltage / HZ 400 / 50 - Voltage fluctuation max. +/- 5 % - With switch cabinet - Ohne Stellventile und Wasserpumpen

The machine was used very little, the total printing time is less than 50 hours. Accesories: - CN3D Smart Cabinet (base cabinet), operating hours: under 50 hours, Installation: 2022, Installation space in mm (x/y/z): 420×300×400mm, software: BCN3D Stratos slicing software, network connection: Offline printing: SD card / Online printing: WiFi or Ethernet, building material: BCN3D certified profiles for BCN3D filaments / open filament system, Layer thickness: 0.05-0.5mm, number of nozzles: 2, operating system: Microsoft Windows Server 2012 R2, Windows 7, Windows 8, Windows 8.1, Windows 10 (64 bit only), Windows 11 at least 4 GB RAM

The machine was dismantled at the end of 2021 and has been stored in a hall ever since. The packer is complete with control cabinet and its own compressor. The wiring to the control cabinet was documented during dismantling. Instruction manual on German is also available.

used all-purpose oven stone slabs oven electric from Miwe Model Condo CO 4.1208 from year of construction 2018 tested and cleaned in stock immediately available for sale. The stove is with 4 shelves each 120x80cm with exhaust hood including fan and proofing cabinet. All steam boxes have been renewed. - 4 tiers each 120x80cm - Each floor with Miwe FP control - each floor can be controlled separately - Top and bottom heat can be controlled separately - each floor with separate steam function - with proofing cabinet - with steam condenser - with exhaust hood - Floor entrance height 17cm, interior height 16cm - Power: 39.8 kW - Built in 2018 Dimensions Width: 150cm Depth without hood: 133cm, with hood 173cm Height without hood: 194cm, with hood 213cm

DHE DEN HOLLANDER ENGINEERING: Used direct heating system for milk, cream, liquid egg, ice cream mix, etc. by DHE Equipment for the production of milk with a longer shelf life using the gentle process The product is heated to 65°C in counterflow, heated to 130°C by steam injection in less than 1 second and then cooled down again in a very short time by evacuation. Further cooling is carried out by the incoming product in counterflow and ice water. Extraordinarily gentle on the product process - closed supply tank - speed-controlled pumps - Homogenizing machine -Heater - Infusion container - Relaxation tank - Load steam condenser -Piping - Fittings and control cabinet - Measuring, regulating, controlling, recording and safety equipment - Connections for: steam, water, electricity, etc. - All system components mounted on a base frame in floor construction and mounted in containers Ca ...

Overview The filling line was manufactured in 2021 by the German company ALWID. The filling line is new and can fill  chemical products into plastic containers. With the exception of the bottle feeder and Posimat, glass bottles can also be processed. Due to ATEX certification, explosive products can be processed with the line. The equipment comes with a 2-year warranty (in single-shift operation) and all components of the equipment can be purchased separately.  Technical details Capacity: 9000 containers/h (varies according to bottle volume and product).  Container  Max. Diameter: 100mm  Max. Height: 300mm  Control Siemens S7 Single machines  Bottle Hopper | ALWID | POSIMAT-ACCESS-N15  Bottle feeder with hopper 2000 l, in stainless steel, chassis and supports in mild steel painted Positronic control system for optimal adaptation to downstream filler Machine, completely internally ...

Control panel with compact control cabinet SIEMENS SINUMERIK 840D OP 031 6FC5203-0AB10-0AA0 LCD - Screen: 9,, 5 Operating voltage: 24 V DC MMC 102 6FC5210-0DA20-0AA1 DX2-66 8 MB Compact control cabinet: 600 x 600 x 210 mm used, tested ! Also available separately ! Dimensions: 600 x 230 x 600 mm

Floor-standing distributor, computer terminal, PC cabinet, server cabinet TRITON RMA-18-A88–CAX–A1 800 x 800 x 1040 mm Door: 800 x 800 mm ( with safety glass window 470 x 780 mm ) 2x side panel: 650 x 610 mm rear panel: 800 x 800 mm Welded floor distributor with removable side and rear panels used, tested ! Dimensions: 820 x 800 x 1040 mm

Bus housing, control cabinet, standard control cabinet RITTAL BG 1579.450 800 x 300 x 155 mm width: 800 mm, depth: 155 mm, height: 300 mm viewing window: 740 x 155 mm used, tested ! Dimensions: 800 x 330 x 170 mm

Bus housing, control cabinet, standard control cabinet RITTAL BG 1579.450 800 x 300 x 155 mm width: 800 mm, depth: 155 mm, height: 300 mm viewing window: 740 x 155 mm used, tested ! Dimensions: 800 x 330 x 170 mm

Sliding door cabinet, tool cabinet PAGUS 2000 x 650 x 1450 mm ( usable dimension ) 2 sliding doors: 870 x 1330 mm 80 mm 4x shelves: 2000 x 620 mm ( permanently installed ) usable compartment heights ( from below ): 220 / 240 / 250 / 240 / 290 mm used, tested ! Dimensions: 2010 x 700 x 1450 mm

Testing press, hardness tester KARL FRANK GMBH Type 530 Test force: max. 250 kg Dimensions(hardness tester): 600 x 320 x 800 mm Base cabinet with accessory compartment Dimensions(base cabinet): 650 x 410 x 700 mm used, tested, with accessories ! Dimensions: 650 x 410 x 1520 mm

Testing press, hardness tester with sorting device KARL FRANK GMBH Type 530B Test force: max. 250 kg Year of construction: 1957 Dimensions(hardness tester): 1050 x 800 x 900 mm Base cabinet with accessory compartment Dimensions(base cabinet): 650 x 410 x 700 mm used, tested ! with accessories ! Dimensions: 1050 x 800 x 1600 mm

Computer terminal, PC cabinet, server cabinet PAGUS 800 x 730 x 1000 / 1300 mm ( 800x730x1000/1300mm ) Computer housing: 740 x 650 x 740 mm < br /> with a shelf Computer compartment: 430 x 600 x 80 mm (extendable) screen window: 540 x 390 mm keyboard drawer: 700 x 200 x 60 mm used, tested ! Dimensions: 800 x 730 x 1000 / 1300 mm

Chemical pumping station PAGUS plastic cabinet 700 x 830 x 1590 mm Air diaphragm pump ALMATEC AC-E 10 operating pressure: max 10 bar cabinet almost metal-free ! Dimensions: 700 x 830 x 1590 mm

Chemical dosing station PAGUS plastic cabinet 710 x 800 x 1690 mm 2 air-operated diaphragm pump and various valves and sensors cabinet almost metal-free ! Dimensions: 750 x 950 x 2100 mm

Medium Frequency Welding Inverter REXROTH / BOSCH PSI 6000 PSI 6100.350 L1 1070081665-219 GK100LS105 1070086966-102 100 A 400 V with control cabinet ! even without cabinet SG266 !; Dimensions: 800 x 450 x 450 mm

Code: 0136 Brand: ITALPRESSE Model: FORMATIC 20.9 Hydraulic fluid membrane press Two sided lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2000 x 900 Daylight mm 325 Cylinder stroke mm 325 Heating electric boiler Kw 27 Thrust ton 300 ton N° 3 thrust cylinders Hydraulic unit power Kw 5,5 Pressure control manometer Automatic pressure reset Opening timer Overall dimensions mm 3300 x 1400 x 2400 h Weight kg 8100

Vacuum homogenizer, process plant Becomix RW 125 CD Machine COMPLETE BECOMIX RW 125 CD HOMOGENIZER IN VERY GOOD CONDITION. Maschine comes from product development. Commissioning December 2007 composed of: 1. Vacuum homogenizer in pharmaceutical design, homogenizer water-cooled and with Becomix Powder Jet Manufacturer: Becomix Type RW 125 CD Year of construction 2006, very good condition, commissioning December 2007 Capacity usable volume 125 l Vacuum and flameproof -1/+2 bar Heating jacket 21 l Pressure-resistant 4 bar 3. Bcomix Promas CS Control 4. 1 piece of energy frame incl. valves, vacuum pume, 5. Control cabinet with frequency converters 6. Control cabinet with Siemens S-7 and control panel with Promas CS software 7. Complete documentation including FAT, IQ, OQ.

Code: 0158 Brand: ITALPRESSE Model: LOCK FORM SYSTEM AIR - CE Standard Hydraulic air membrane press with loading and unloading - CE Standard 3-D coated on one face lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2650 x 1250 Piece height mm 55 Pressure control manometer Automatic pressure reset Opening timer

Engraving milling machine DECKEL type G1L Pantograph, pantograph Masch. Item no.: 75021 Year of construction approx. 1970 Milling table 500 x 200 mm Stencil table 530 x 320 mm Spindle speed approx. 4000 - 15000 rpm. 8 levels Gear ratio 1:1 to 1:50 infinitely adjustable Tool holder 4 mm Collet Motor power 0.85 kW Mains connection 380 volts, 50 Hz. - pantograph - letters and sets of numbers - various burrs - mobile on fixed rollers - operating instructions - adjacent accessory cabinet L x W x H 600 x 380 x 800 mm Space requirements Engraving milling machine L x W x H 1000 x 700 x 1300 mm Weight engraving milling machine 270 kg Weight accessory cabinet 60 kg (with contents) good condition; used

pressure: 130 t chamfer lenght: 3150 mm distance between columns: 2600 mm engine output: 15 kW control: CYBELEC VisiTouch weight of the machine ca.: 10900 kg dimensions of the machine ca.: 3990x1750x2900 mm Domestic equipments: - DELEM DA66T - 2D CNC control with LCD color display for control of 7 axes: Y1 = 1 ° cylinder Y2 = 2 ° cylinder X1 = horizontal movement of the backgauge X3 = horizontal movement of the stop finger / inclination R = vertical movement of the backgauge Z1-Z2 = lateral movement of the stop fingers - Top Dead Center - Speed changeover point - bending end - Deactivation point of the safety light barrier - Retreat stop - CNC controlled proportional pressure control - conical bending - USB port - DFC stator suspension compensation - Motorized back gauge model AS with 5 controlled axes - X-axis: 1000 mm stroke, X3-axis: 200 mm stroke - R-axis: 250 mm stroke - Hydraulic ...

• For applying a security label to a top-load folding box. • Output max. 300 folding boxes/min. • Folding box dimensions width in infeed direction max. 120 mm, height max. 95 mm • Separating station • Side conveyor belts • Top conveyor • Label dispenser PAGOmat 6/2 A 75/100, height- and cross-adjustable • Label roll outer diam. max. 400 mm, core diam. 76 mm • Label width max. 40 mm, label length max. 25 mm • Inkjet printer Wolke (Videojet) m600 advanced with 1 print head • Camera control PCE with camera Mini-Smart, retrofitted in 2010 • Badpackage ejection into container with air nozzle and ejection countercheck • Various controls with light barriers • Machine control with separate control cabinet, PLC Siemens S7-300, HMI Siemens Simatic Panel • Camera control with separate shadow cabinet, PLC S7-200 and IPC (Windows XP Professional), keyboard ...

2. VFDK-3 WALL TYPE CARTRIDGE FILTERED POWDER COATING BOOTH Wall-type powder coating booths are an economical manual powder coating booth solution for companies producing and powder coating small parts. These powder coating booths save space in the workshop and are a practical method of powder coating the work pieces to be painted. The wall-type coating booths can be combined with conveyors in transfer-type powder coating plants or have a simple conveyor line according to the project. WORKING PRINCIPLE The extraction fan is located at the top of the booth, at the end of the system. The pressurized air flow created by the fan carries the powder coating particles towards the filters and collects them on the outer surface of the filters. Powder coating filters are cartridge type and are cleaned during operation by a pull-reverse filter cleaning system. The pull-reverse system consists o ...

2. VFDK-3 WALL TYPE CARTRIDGE FILTERED POWDER COATING BOOTH Wall-type powder coating booths are an economical manual powder coating booth solution for companies producing and powder coating small parts. These powder coating booths save space in the workshop and are a practical method of powder coating the work pieces to be painted. The wall-type coating booths can be combined with conveyors in transfer-type powder coating plants or have a simple conveyor line according to the project. WORKING PRINCIPLE The extraction fan is located at the top of the booth, at the end of the system. The pressurized air flow created by the fan carries the powder coating particles towards the filters and collects them on the outer surface of the filters. Powder coating filters are cartridge type and are cleaned during operation by a pull-reverse filter cleaning system. The pull-reverse system consists o ...

1. ELECTRICAL BOX TYPE OVEN Purpose of use : Powder curing Maximum temperature : 220ºC The furnace heating system is designed as forced convection system. It is based on the principle of pumping the oven volume air into the oven with the help of a circulation fan and increasing the oven temperature with the heat transfer provided by the air passing through the heating unit. The walls of the furnace and heating unit are made of modular sheet metal and high density insulated panels. Air distribution ducts with regulated flaps inside the oven ensure that the oven temperature is homogenous at every point. The temperature control device is digital type and provides precise adjustment of the oven temperature. The heating unit is placed on the side, rear or top of the oven and consists of an insulated heating chamber, heating cell with resistance inside, circulation fan that can opera ...

Workbench, work table, assembly bench, drawer cabinet, tool cabinet -Width: 1500 mm -Depth: 750 mm -Height: 800 mm -Drawers: 5 -Weight: 80 kg -Conductive table top with: Anka-Plast covering

Workbench, work table, assembly bench, drawer cabinet, tool cabinet -Width: 1500 mm -Depth: 750 mm -Height: 780 mm -Drawers: 5 -Weight: 80 kg -Conductive table top with: Anka-Plast covering

Spot welder, spot welder, spot welder, spot welder -Stationary -Operation by hand switch -Arm length welding machine: 350 mm -Welding gun type: -Control -Dimensions machine: 1500/1000/H1670 mm -Weight machine: 774 kg -Dimensions control cabinet: 1550/420/H1960 mm -Weight control cabinet: 330 kg

Drying oven, drying cabinet, electrode re-drying, electrode cabinet, electrode dryer -Power: 0.2 kW -max temperature 110° C -electrically heated -Steel lining -Weight: 7 kg -Number: several dryers available -Price per piece

Control cabinet and distribution board construction, busbars, distribution cabinet, power distributor, housing, universal housing, electronics housing, distribution box -Manufacturer: Mannesmann Demag, electronics housing from injection molding machine Demag D 100-275 NC -Ident. No.: 06594865 -Dimensions: 200/200/H90 mm -Weight: 1.1 kg

Control cabinet and distributor construction, busbars, distribution cabinet, power distributor, housing, universal housing, electronics housing, distribution box -Housing: electronics housing metal -Door: lockable, without key -Dimensions: 600/400/H615 mm -Weight: 24 kg

Control cabinet and distributor construction, busbars, distribution cabinet, power distributor, housing, universal housing -Manufacturer: Rittal, PK polycarbonate housing with bracket and busbar -External dimensions: housing 254/111/H180 mm -Number: 2 available -Price per piece -Total dimensions: 255/115/H220 mm -Weight: 2.9 kg/pc.

Electric heater, electric heater, heating coil, electric tubular heater, touchable semiconductor heater, switch cabinet heater -Manufacturer: Stego, switch cabinet heating -Type: CSF 060 -Power: 150 watts -Voltage: 120-240 V -Dimensions: 150/60/H90 mm -Weight: 0.4 kg