We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
122,049 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
GeneralUniversal milling and turning machining centre with duoBLOCK construction; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal800 mmCross1050 mmVertical850 mmTool changerApplicationUniversal Type of magazineWheel Tool changer planehorizontal Type of gripperDouble gripper Number of tools123 NC mill-turn table with palletNC mill-turn table with pallet number of T-slots: - 1x cross slot 14 H7 / 0.55 H7 - 12x star slots 14 H11 / 0.55 H11 / 22.5° max. table speed milling operation: 30 rpm turning operation: 800 rpm integrated balancing sensor Pallet changer for 2 palletsType of Measuring system Direct measuring systemTable surface Ø 800 x 630 mmCentre bore 50 mmMaximum load (table centre) 1400 Kg4. Axes (swivelling range) 360 ...
GeneralTwo spindle turning/milling centre with - Main and counter spindle; Control: CELOS with Siemens 840D sl Operate Tool holder 2Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.4000 rpmPower max. (40% DC)10 kWTool magazineNumber of tools24 Max. tool length230 mmMax. tool diameter80 mmMax. tool weight7 KgTurning-milling spindleSpindle taperHSK-A 63 Spindle speed-12000 rpmDrive power (100% DC)19 kWDrive power (40% DC)22,5 kWTorque (100% DC)85 NmTorque (40% DC)120 Nmlocking moment1000 NmSwivelling range+/-110 degreeSlide 2Longitudinal stroke1200 mmTransverse stroke195 mmSlide 3Longitudinal stroke1200 mmSlide 1Longitudinal stroke1200 mmTransverse stroke490 mmY axis, vertical+/- 100 mmHeadstock, rightClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWDri ...
GeneralTwo spindle turning/milling centre with - Main and counter spindle; Control: CELOS with Siemens 840D sl Operate Tool holder 2Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.4000 rpmPower max. (40% DC)10 kWTurning-milling spindleSpindle taperHSK-A 63 Spindle speed-12000 rpmDrive power (100% DC)19 kWDrive power (40% DC)22,5 kWTorque (100% DC)85 NmTorque (40% DC)120 Nmlocking moment1000 NmSwivelling range+/-110 degreeTool magazineNumber of tools24 Max. tool length230 mmMax. tool diameter80 mmMax. tool weight7 KgSlide 3Longitudinal stroke1200 mmSlide 2Longitudinal stroke1200 mmTransverse stroke195 mmSlide 1Longitudinal stroke1200 mmTransverse stroke490 mmY axis, vertical+/- 100 mmHeadstock, rightClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWDri ...
GeneralUniversal Milling Machine; Control: CELOS with Heidenhain TNC 640 Working area 1Longitudinal650 mmCross520 mmVertical475 mmFloor space/WeightDimensions (L x W x H)2,85 x 2,35 x 2,75 mWeight approx.7500 KgTechnical DataType of main driveAC Drive power (100% DC)30 kWDrive power (40% DC)46 kWSpeed range20 - 15000 rpmSpindle taperHSK-A 63 Clamping SystemHSK-A 63 Feed rate longitudinal/transverse/vertical-42000/-42000/-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minSpindle speed 15,000 rpm, 200NmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 15,000 min-1 Output 46 kW / 30 kW (62 hp / 40 hp) Torque 200 Nm / 130 Nm (148 ft lbs / 96 ft lbs) (40 / 100 % duty cycle)NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 630 x 500mm / 24.8 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring sy ...
GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWSpeed range25 - 5000 rpmTorque (100% DC)280 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)225 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-6000 rpmPower max. (40% DC)10 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the ap ...
used
ascobloc Panorama circulating air cooling cabinet + base cabinet Stainless steel Circulating air evaporator - vertical air flow from rear to front Optimal illumination of the display case interior through space-saving lighting Sliding doors for easy opening Dimensions cabinet approx. 154x83x88 Dimensions top display case approx. in brief
used
number of controlled axis: - workpiece weight: - kg throat: - mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Mobile robot cell with base frame and aluminum acrylic glass protective cabin - Solid aluminum clamping table for horizontal and vertical clamping - High-precision KUKA robot KR 120 R2700 extra HA with robot manual control panel - Spindle for milling - Control cabinet for KUKA robots - Control cabinet for milling spindle Robot INTERFACE INTERFACE Parallel Safety X11/X13 INTERFACE implementation X51 INTERFACE Ethernet 1xRJ45 X66 INTERFACE reference switch X42 DIGITAL I/O 16/16/4 MCC-30.1S KR C4 Docs & Parts Standard KSS 8.3 KUKA.ProfiNet Controller/Device 3.2 KUKA.SafeOperation 3.2 KUKA.PLC ProConOS4-1.1 ltd KUKA.CNC 2.1 KUKA.DiagnosticSafety 2.1 KUKA.WorkVisual KUKA smartPAD 10 m KUKA smartPAD holder Cable set 7m CON X20 Refe ...
used
Used in-store oven Wiesheu B8E2 IS600, for 8 trays 60x40 cm with exhaust hood and proofing cabinet from year of construction 2007. The oven is with fixed water connection for swathing and can be driven on wheels.We have a large selection of in-store ovens in the warehouse to visit at any time. Shipping and trade-in on request. Wiesheu in-store oven -Type: B8 E2 IS 600 -for max. 8 sheets -for 60x40 cm sheets -digital IS600 controller -can be driven on swivel castors -400 V - 50 Hz - 18.4 kW-26.6 A With proofing cabinet GS2_ED60/40_Gärschr._230V50Hz -20 runs for 60x40 cm sheets optionally also 10 runs for 60x80 cm - Dimensions Height: 217 cm Width: 93 cm Depth: 97 cm -Technical data proofing cabinet -Year of construction 2007 -2.1 kW 230 volts 9.1A
GeneralUniversal Milling Machine; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal650 mmCross520 mmVertical475 mmTechnical DataType of main driveAC Drive power (100% DC)16 kWDrive power (40% DC)21 kWSpeed range20 - 15000 rpmSpindle taperSK40 Tool holder DIN ISO 7388-1-A Clamping SystemDIN ISO 7388-3-A, AD Feed rate longitudinal/transverse/vertical-42000/-42000/-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minFloor space/WeightDimensions (L x W x H)2,85 x 2,35 x 2,75 mWeight approx.7500 KgDirect measuring systemDirect path measuring systemSpindle speed 15,000 rpmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 15,000 min-1 Output 21 kW / 16 kW (28 hp / 21.5 hp) Torque 111 Nm / 85 Nm (82 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 630 x 500mm / 24.8 ...
GeneralTwo spindle turning centre with - partial hollow clamping device for main spindle and counter spindle internal diameter of draw tube Ø67 mm (2.63 in) x 700 mm (27.55 in) deep - 2 C-axes and spindle brakes (hydr.) - 2 12 fold Sauter star turrets reception VDI 40, DIN 69880-40 with precision interface (Trifix) and tool drive connection/drive acc. DIN 5480 - Y-axis, slide I - Counter spindle slide with NC-cross stroke and tailstock; Control: CELOS with Siemens 840D sl Operate Headstock, leftClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle diametre on front bearing130 mmSpindle bore87 mmDrive power (100% DC)25 kWTorque (100% DC)280 NmC-Axis Speed2000 rpmSpeed range0-5000 rpmHeadstock, rightClamping chuck Ø315 mmSpindle bore87 mmSpindle nose diameter170h5 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWC-Axis Speed2000 rpmTorque (100% DC)280 NmS ...
used
Properties: Cjt9y9ndu0 Condition: fully functional, with traces of use Color: Orange Material: Steel Ideal for fast material transport Expertly dismantled and packed Specifications: Dimensions of the belt conveyor Total length extended: 9820 mm Total length retracted: 4350 mm Conveying length: 9400 mm Total width incl. control cabinet: 1600 mm Total width without control cabinet: 1200 mm Conveying width/ belt width: 785 mm Type of strap: smooth Height incl. motor: 260mm Net weight: 5000 kg Conveying height incl. feet: 820 mm Drive: Motor Motor included Control cabinet included Telescopic belt conveyors Due to the excellent workmanship of the roller conveyor curve, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading you ...
new
Working width: 4500 mm Working height: 3000 mm Number of cylinders: 6 St. Dimensions (L/W/H): 5600x1350x3550 mm Weight: 3000 kg S&S frame press Bavaria 2000 L --------------------------------- With automatic pressing cycle + manual control for corner connections tenon + slots and dowel connection / mortised tenon, can be changed using a selector switch on the control cabinet. With basic equipment for the optional use of counter profiles if the sash is on loose part to be folded over. CE version Basic machine in the strongest welded frame, with thick-walled special hollow profiles. Guideways of the pressure bars for the press corners in a low-abrasion finish. Fast, smooth, manual width adjustment by ball-bearing carriage, fixation in 50 mm Hole grid, optional motorized width adjustment with with hydraulic clamping (surcharge). Height adjustment and pressing by long-stroke cylinder in one ...
used
KUKA KR16 L6 ARC-C robotic welding machine together with the PO-2t6m-01 rotary positioner was commissioned in 2017 and its purpose was to very precisely weld gates and fence spans, but it can also weld various types of structures that fit within the range of the rotary positioner. The welding station includes a robotic arm built in 2009, which was previously only used for testing. The whole thing has only worked for 50 hours. The KUKA KR 16 L6 ARC-C robotic welding system is equipped with: – welding robot: KUKA KR16 L6 ARC-C – controller: KUKA KR C2 – rotary manipulator: PO-2t6m-01 – current power source: FRONIUS TransPuls Synergic 4000 CMT R – software: KUKA System Software (KKS) – torch cleaning device: TBi BRG-2-ES-DAE – wire feeder: FRONIUS ROBACTA DRIVE CMT – track The rail-moving KUKA KR16 ARC industrial robot with a reach of 6 m allows excellent preci ...
used
Computer terminal, PC cabinet, server cabinet PAGUS 800 x 720 x 1560 mm Computer cabinet: 800 x 720 x 880 mm Computer compartment: 410 x 500 x 80 mm (extendable) Monitor housing: 800 x 330 x 680 mm (lockable) Screen window: 540 x 410 mm keyboard drawer: 700 x 300 x 60 mm used, checked ! Dimensions: 800 x 720 x 1560 mm
used
Telescopic conveyor, unloading telescope, telescopic belt conveyor - extendable conveyor belt Properties: Used telescopic belt conveyor Condition: fully functional with signs of wear Ideal for fast material transport Expertly dismantled and packed Year of construction: 2003 Colour: Grey Telescopic belt conveyor Total length retracted: approx. 5,080 mm Total length extended: approx. 11,650 mm Total width incl. control cabinet: approx. 1,250 mm Total width without control cabinet: approx. 930 mm Belt width: approx. 600 mm Strap Type: Smooth Incl. feet Incl. control cabinet 1 Piece in stock Price per piece
used
Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Clamping plate: with support ribs, on a solid base cabinet with drawers -Length: 1500mm -Width: 1005mm -Plate: with support ribs -Base cabinet: 3 cabinet doors, pull-outs see photos -Total dimensions: 1500/1005/H910 mm -Weight: 1200 kg
used
Computer cabinet, control cabinet, terminal cabinet, terminal housing, control panel stand housing, control panel stand foot, stand column -Stand: stand housing for control desks / terminals -Execution: solid metal housing -Dimensions: see photos -Dimensions: 385/335/H730 mm -Weight: 32 kg
used
Electric heater, electric heater, heating coil, electric tubular heater, touchable semiconductor heater, switch cabinet heater, fan heater, fan heater, switch cabinet fan -Manufacturer: RO/SE fan heater/switch cabinet heater -Type: HH/250s -Power: 250 watts -Voltage: 220-240 V -Dimensions: 115/120/H170 mm -Weight: 1.3 kg
Working area 1Longitudinal500 mmCross450 mmVertical400 mmGeneralUniversal milling machine, with compound Guideway construction New DMG MORI Design; Control: CELOS with Siemens 840D sl Operate Technical DataType of main driveAC Drive power (40% DC)20,3 kWDrive power (100% DC)14,5 kWSpeed range20 - 14000 rpmSpindle taperSK 40 DIN 69871 Feed rate longitudinal/transverse/vertical-30000/-30000/-30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minMiscellaneousClamping SystemDIN 69872 Floor space/WeightDimensions (L x W x H)4,15 x 3,98 x 2,75 mWeight approx.4500 KgSwivel Rotary Table, simultaneousSwivel Rotary Table for simultaneous machining swivel range -5 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformation Not available with NC-Divider EA 410!Table surface 630 x 500 mmCentre bore 30H6 mmMaximum load (table cen ...
used
Manufacturer : Merk Process (Bucher) Model: Drycab VDC (Vacuum dryer cabinet) Type: vacuum tray dryer Year : 2008 Application :? dry and process different heat-sensitive products for the food and pharmaceutical industry. Documentation available A - Vacuum dryer cabinet Cabinet volume: 656 L Pressure: - 1 / 0 Barg Permissible temperature: 200?C Heating jacket: 2 X 20 L Pressure: 5 barg Permissible temperature: 250?C Materials: 304 stainless steel Equipment: temperature sensor, pressure sensor, regulated valve, etc. B - Condenser Type: tubular exchanger Volume 1: 10.7 L Pressure: -1 / 3 Barg Permissible temperature: 100?C Volume 2: 21.7 L Pressure: 0 / 8 barg Temperature range: 25?C Materials: 304 stainless steel C - Vacuum pump Manufacturer: Elmo Rietschle Type: rotary vane vacuum pump D - Temperature regulator Ma ...
used
Used Bottle Inspector GF HAWK 24 000 BPH Characteristics of the machine and of the products handled It is made through traditional commands push button panel PC hardware video keyboard and mouse Traditional commands In order to allow quick and safe intervention by the operator the controls have been provided of a traditional type for example machine stop machine running etc PC hardware The machine is equipped with the main hardware elements of the PC such as video keyboard mouse Ambient temperature In order not to jeopardize the safety and optimal operation of the machine follow the values indicated storage temperature from 10 to 60 C ambient operating temperature from 10 to 45 C temperature inside panels Power electrical cabinet electrical power cabinet temperature t MAX 45 C obtained with a ventilated cabinet Vibrations The machine was designed and built in compliance with the directiv ...
used
New Palletizer ROBOT ARM PALLETIZER Automatic palletizing group specially designed for high speed applications with Fast Pack Formation Table at High Elevation Speed suitable for 72 000 cans hour line for 250 ml slim cans with 6 4 configuration on 1200 1000 mm pallets Package infeed height H 2000 mm Designed for pallet dimensions 1000x1200mm Max standard pallet height 1900mm Pallet transfer height H 500mm Machine is composed of Fast Pack Formation Table at High Elevation Mechanism to turn packs automatically at inlet of the palletizer according to the predetermined configuration of each layer It is controlled by the PLC and The device is equipped with a turner which turns the product of 90 if required Intermediate Table Consists of conveyor table a product pushing device to pallet lifter Driven by a geared motor The translation of the layer from the performer to the palletiser is carried ...
used
Working area 1Longitudinal735 mmCross650 mmVertical560 mmTechnical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minGeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS with Siemens 840D sl Operate Tool changerTool changer planevertical Type of gripperDouble gripper Number of tools30 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmFloor space/WeightWeight approx.12100 KgNC swivel rotary table integrated in rigid tableType of Measuring system Direct measuring systemTable surface 800 x 650 (Ø 650) mmCentre bore 50 mmMaximum load (table centre) 600 KgSlot width 14 mmRotation Speed 5. Axis 20 rpm5. Axes (swivelling range) +120/-120 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4 ...
used
A transformer in a SwiBox control cabinet is offered here. It is fully wired with terminal blocks and an Allen & Bradley CAT140-CMN-6300 SER C motor circuit breaker. There are three 4x10mm² cables with open ends. One FLEX-JZ in and two AWM 2587 out. The control cabinet has the compartment with transformer, terminal blocks and motor protection at the bottom and a 19" compartment at the top. The cabinet is 120cm high and 100cm deep. Everything is in very good condition. The front door opens a bit hard. PRI: 3 x 400V SEC: 3 x 208V, 3x60A 50/60Hz
used
Drying oven, drying cabinet, chamber dryer oven, heating oven, heating chamber, drying oven, drying cabinet, drying and heating cabinet, -Manufacturer: GFO, chamber dryer oven type KE-SO -Useful space: 1 m³ / 1000x1000x1000 mm -Heating power: 40 kW -max temperature 350°C -Working temperature: 100 to 300°C -Individual components: see photos -Setup dimensions: 2510/1600/H3760 -Transport dimensions: 2510/1600/H2380 mm -Weight: 1500kg
used
Description: Cabinet dimensions: Cabinet length- 300 - 2600 mm Cabinet height- 300 - 1350 mm Carcase width- 220 - 700 mm Pressing force: Horizontal- 1800 kg Vertical- 2300 kg Pressing elements: Vertical 7 pieces 150 x 50 mm Horizontal 6 pieces 150 x 50 mm Connection: 400 V 3 KW Approx. Onsite Dimension. (l x w x h): 3,800 x 1,000 x 2,400 mm, weight approx.: 2,200 kg
used
X-axis Deform stroke 650 mm Y-axis Vertical stroke 1,300 mm Z-axis cross transport 2,600 mm Basic unit X-axis Deform stroke Max. Travel distance 650 mm drive servo motor Y-axis Vertical stroke Max. Travel 1,300 mm drive Servo motor Z-axis cross transport Max. Travel distance 2,600 mm drive Servo motor C-axis pivoting 0 - 90 drive pneumatic manipulation weight 10 kg pneumatic Air maintenance unit with manual sliding valve Suction circuit with vacuum monitoring 1 gripper circuit with part monitoring 1 electrics Handling control cabinet freestanding The injection moulding machine requires an ERC-cutting standard voltage 3x400V+N+PE / 50 Hz peripheral interface standard General Microcomputer RC 100 integrated screen text German handheld control unit HBG 2, two line display livery chrome yellow RAL 1007 Hardware and software for TEACH IN Safety package 1 Structure of the device with s ...
used
Illig deep drawing machine Type: UA 150, 14.500 h Runhour! Built: 1986 Closing unit Plate size: 1000 x 1500 Other max. plate size: 1000 x 1500 max. moulding area: 950 x 1450 max. Drawing depth: 600 UA 150 has upper heating small spotlight with 4 position circuit with separate control cabinet underheating has total field control, flat-fitting chip frame autom. Upper stamping system Normal construction with 2 downhill control film throughhang control Protective grille by hand 4 compartment cooling fan + 4 compartment spray nozzle cooling pre-blowers + automatic deforming, reduction frame - quick change device electron. Schleicher control in the separate control cabinet 1 clamping frame for max. mold ingescent
used
: ERC 53/1 - CL, Robot Built: 1999 Other X-axis Deform stroke 650 mm Y-axis Vertical stroke 1,300 mm Z-axis cross transport 2,600 mm Basic unit X-axis Deform stroke Max. Travel distance 650 mm drive servo motor Y-axis Vertical stroke Max. Travel 1,300 mm drive Servo motor Z-axis cross transport Max. Travel distance 2,600 mm drive Servo motor C-axis pivoting 0 - 90 drive pneumatic manipulation weight 10 kg pneumatic Air maintenance unit with manual sliding valve Suction circuit with vacuum monitoring 1 gripper circuit with part monitoring 1 electrics Handling control cabinet freestanding The injection moulding machine requires an ERC-cutting standard voltage 3x400V+N+PE / 50 Hz peripheral interface standard General Microcomputer RC 100 integrated screen text German handheld control unit HBG 2, two line display livery chrome yellow RAL 1007 Hardware and software for TEACH IN Sa ...
new
Cat.-Nr. 11-3200 new Necessary space for mash and lauter tun: LxWxH: 3 x 2 x 2,80 m Necessary space for tanks: LxWxH: 4,0 x 5,0 m complete 2 brews / day = 10hl Basic Equipment The Brew House is complete with all equipment. All equipment are with high standard an very simple to use. This 5 hl Brew House is built as 2 devices-brew house manual version with manual butterfly valve. It is possible to make 2 brews/day (10 hl) Technology All the pipes can be cleaned and sterilized in the circuit over the pump included. a) In the mash boiler the mash will be cooked, then it will be pumped with one beer pump made of stainless steel from mash boiler to the lauter tun. b) After the lauter wort will be pumped back to the mash boiler. c) After emptying the lauter tun the grit floor will be removed. The lauter tun will be changed to a whirlpool. d) After cooking th ...
used
Cat.-Nr. 11-3210 new Basic Equipment The Brew House is complete with all equipment. All equipment are with high standard an very simple to use. This 10 hl Brew House is built as 2 devices-brew house manual version with manual butterfly valve. It is possible to make 2 brews/day (40 hl) Technology All the pipes can be cleaned and sterilized in the circuit over the pump included. a) In the mash boiler the mash will be cooked, then it will be pumped with one beer pump made of stainless steel from mash boiler to the lauter tun. b) After the lauter wort will be pumped back to the mash boiler. c) After emptying the lauter tun the grit floor will be removed. The lauter tun will be changed to a whirlpool. d) After cooking the hops a special injection valve is introduced inside the lauter tun so that it can be used as a whirlpool. Mashing Tun / Wort Boiler Volume brutto: ...
used
Q Ferquenzumrichter 140kVA ABB - AV GmbH ACS607-0140-3 Fig. 4 quadrant converter (Rückspeisefähig!) compl. built in switch cabinet. Dimensions H = 2010 T = 640 B = 1200 (2-door). Technical data: Eingangsfreq. 46.63 Hz Ausgangsfreq. 0.. 300 Hz U = 380TH. 415V IP21 (Cabinet) Wiring diagrams available ABB Manual: ABC://abc05.ABB.com/global/Scot/scot201.nsf/veritydisplay/fdc8e06693b9 114ac2256df0003fe70e/$file/en_6047hw_5d_scrres_plus_update_note.PDF Net price in FU Wardrobe (2 PCs.) 6,500 Questions under 0170 / 2204056 or fa.raupp@t-online
used
Disc filter 25 mm screening, complete with feed Hopper, low band, fine discharge conveyor, air separation, control cabinet. Good ZustandDisk screen 25mm sceening, complete with feed hopper, down coveyor, fine conveyor, windshifter, control cabinet. Good condition, contact by mail under: rerec@web.deoder, mobile: 0049 160 96232593
used
Glass Heating Equipment Furnace GT1411 Equipment application. This special equipment is used for heating homogenously the flat glass and cooling it thereafter, is involved in the glass deep processing machinery. The suitable working glass is clear float glass. Power supply requirement and total weight of equipment. This kind of equipment requires a 3-phase-5-line AC power supply of 380V and total installed power of it is about 250kW. Total weight is about 10 tons. Constitution of Glass Heating Equipment. Computer, control cabinet, power regulation cabinet, loading table, heating section, coating section, annealing section, unloading table. The Furnace was in good operational condition when it was dismantled in 2016. The unit is located in a warehouse in Finland
used
Used and in very good condition, Kaak Twin spiral freezer with a producing capacity depending on the product data (based upon 1000 pcs of cream cakes of 2500 grams each) approximately 2500 kg/h. Spiral freezer is largely made of stainless steel/aluminium with the exception of the drums (which are hot-dip galvanized). Infeed/outfeed North/South configuration. Infeed/outfeed height 800 mm, stainless steel Ashworth belt B26-12-17 with integrated metal side conduction, belt width gross 762 mm, net 648 mm, effective belt length 648 meters, number of tiers per drum 21, 42 in total, inside diameter of drum 3353 mm, outside diameter 4877 mm, maximum height 5255 mm, maximum product height 125 mm (this can also be adapted to a maximum of 200 mm). Furthermore this very well maintained twin spiral freezer is equipped with 3 pieces Güntner stainless steel/aluminium blast freeze evaporators with ...
new
A good sample preparation in metallography (materialography) starts at the correct separation with a wett cutting machine. Good and proper separation prevents the burning and destruction of the material change in its structure and is the best way to save time and consumables. The separation is performed incorrectly is this very elaborate grinding and polishing extremely high overhead "punished"! Wet cutting machine cutting. Wet abrasive cutting | Separating SCHNEIDER METACUT 251 The head of the cutting grinding machine with built-in blade is lowered by a hand lever on the sample. METACUT 251 separating cutters are available exclusively in manual versions. This is usually not a disadvantage: the specimen geometry changes / separation task all the time, so can hinder the establishment of an automatic cut-off grinder. The workpiece is clamped at METACUT 251 - cut-off machines and the de ...
used
EWD ESTERER HD_30 SV high in TOP ZUSTAND ! Repairs 2009, with power Pos.1 frame width 750 mm through shoehe max. 750 mm stroke 600 mm speed max. (also when idle) 300 rpm Number of rollers 4 pcs. feed 0 - 12 m/min operating side, seen in cutting direction: right pressure register. machine and base plate in torsional casting construction. gate rollers are divided for easy exchange, hydraulic lifting and lowering of the upper gate rollers, adjustable roll pressure. Electric feed, for stepless regulation the feed speed. central lubrication for all frame guides. Upper guide with water cooling, with water-covering. swing shaft with grease-lubricated roller bearings, flywheel hubs made of high-quality sphaero casting, swing shaft and flywheel hubs in the press bandage. fixed and empty disc for single-space operation. electric slide (0.55 kW). with gate hanging (saegenspanner, saegeblaet ...
used
Gastro Griddle plate with cabinet Gastro grill plate Griddleplate Cabinet with 4 countertop with 4cm edge Mass: HxBxT= 87x170x97cm Formore items can be found in our shop.
used
Three T-slot plates of a copy-fraes machine from Lid are offered. The T-slot plates can be mounted as a cross table. Scope of delivery only according to photos, without spindles. If you are interested, please request more photos. Further spare parts of lide e.g. towing table of a KF3 pre-wheels. Please ask. Special price Lid cabinet tool cabinet
used
Sorting cabin 6 workstations with control cabinet, Vibrorinne as a task, length of the sorting belt 5, 5 m, width of 80 cm good condition. Sorting cabine, 6 places with control cabinet and vibration channel, conveyor length 5, 5m; width 80cm. Contact us also at rerec@web.de or mobile: 0049 160 96232593
used
Applikon cell cultures bio reactor system / fermentation system built in 2004 consisting of: 1 Applikon 130 liter bioreactor type PS 130 L in 316 L stainless steel electropolished -Product space 3 bar / vacuum -Jacket 6 bar / vacuum -Agitator Magnetgekoppelt, speed adjustable -Piping, heating, valves, filters, pumps, control cabinet, etc. -mounted on frame and wheels -cGMP standard 2. Applikon 30 liter bioreactor type PS 30 L in 316 L stainless steel electropolished -Product space 3 bar / vacuum -Jacket 6 bar / vacuum -Agitator Magnetgekoppelt, speed adjustable -Piping, heating, valves, filters, pumps, control cabinet, etc. -mounted on frame and wheels -cGMP standard 3. extensive documentation
used
Control cabinet The offer includes complete control cabinet containing a flat grinding machine with 2 x room cooler Control: Siemens Type: Sinumerik 3 G 1 x Sinumerik 3 G, 6FC 3742-OHA-Z, 24V DC, 100W 1 x SIMOVERT P 6SC6025-1AA01, type D165 D165/25 M5REQ, no. 3203572, output 1 x 25/50A DS 1 x SIMOREG transistor plate, type 6RB 2025-2EA00, ed.: 2 x 25/50A 200V Various circuit breakers, transformers, etc. Sold only to commercial enterprises. All information without guarantee
new
EUROLUX Fruit and vegetable mill with grinding ring Delivery date: approx. 6-8 working weeks/ by appointment Description of the machine: With this mill system it is possible to shred a wide variety of raw materials, adapted to the pressing system and the degree of maturity. The raw material is placed in the funnel of the mill. There is a screw in the hopper that conveys the raw material to the grinder. The raw material is crushed in the grinder and laterally conveyed out of the grinder. Depending on the material to be ground, different knives and grinding rings can be used. You can also change the grinding degree through the speed. If necessary, it is possible to overlay the grinding with inert gas The system can be easily opened and pulled apart for cleaning. The mill is completely assembled and wired on a frame. Two lip seals are installed to seal the grinder on t ...
used
used baler Manufacturer: PAAL Type: CPH 6540 Built: 2007 Main parts of the press: 1 automatic channel press 1 automatic lacing 1 Hydraulic system 1 Electric control technical data: Pressing force at approx. 300 bar: 650 kN Channel cross-section (h x w): 75 x 100 cm Filling opening (l x w): 160 x 92 cm Number of connecting wires: 4 pieces Binding: 4-fold horizontal Power: Main drive motor: 75 kW Wire pull: 3 kW Twisting: 3 kW Hydraulic oil tank volume: 2200 l Machine weight: 14 t, depending on equipment Operating voltage: 3 x 400 VAC / 50 Hz / N / PE Press complete for continuous operation including: - Machine design consisting of: - printing plate with bearing roller guide at the bottom and inside, - Press box bottom made of highly wear-resistant special steel, - interchangeable, screwed tread irons for the lower plate rollers, - Doors ...
used
Number: VH503 Number: 1 piece Control cabinet for the continuous gas analysis for measuring gas preparation Cabinet disc is available and whole! Delivery possible by arrangement Make: ABB Type: unknown Extract of the component list: ABB Measuring gas conveying unit Advance SCC-F ABB Measuring gas cooler Advance SCC-C RITTAL Filter Fan SK 3326100 WINKLER Filter for electrically heated sample lines AF2055/06/200 DURAG 2 unit of operation & evaluator for combination probes D-RX 250 FESTO 2 valve & filter blocks Collecting container among other things, Dimensions:. 2000x800x650 mm (HxWxD) Weight:.. approx. 180 kg
used
A 2-stage APV water degassing system, Type VII S Type plate Info: Machines No.: 10159 Capacity: 30,000 l per hour Built in 1991 Contents of the lying degassing tanks approx. 2 x 250 l Water precoth 3 bar or slightly higher Residual -0.2 less than 0.1 ppm for a water temperature of 12°C with 1 APV centrifugal pump with 15 KW with 1 vacuum pump, manufacturer Travini Italy, 11 KW with CO2 dosing via needle valve with level control of the entry and exit Water 1 control cabinet on 2 feet standing with Siemens switchgear equipment Dimensions of the system: 2,900 x 1600 x 3200 mm Weight of the plant 950 kg A 2-stage APV water degassing system, Type VII S Type plate Info: Machines No.: 10159 Capacity: 30,000 l per hour Built in 1991 Contents of the lying degassing tanks approx. 2 x 250 l Water pre-pressure 3 bar or slightly higher residue -0.2 less than 0. ...
used
Cutting bun plant Kövy with Fortuna head machine KM 6 in a row. The Kövy is compact with settling tape on planks requires less space than with magazine. Head machine with flourer. with Fortuna head machine KM 6 with settling tape Built in 1999 Maximum hourly output 8400 units Capacity of the pre-fermentation cabinet 530 pieces Capacity of the intermediate fermentation cabinet 780 pieces
used
1 Wulf steam boiler system Manufacture No. 3813 Year of construction 1993 Power: 8 to Damph per hour Up to 13 bar vapour pressure with laterally mounted steam pipe register with Weißhaupt Combi burner for gas and light oil with lying boiler feed water tank Capacity 8,000 l with all-round piping and Structural steelwork with steel fireplace with exhaust gas heat recovery register system with Wulf Elektro control cabinet 1 Wulf steam boiler system Manufacturing No. 3813 Year of construction 1993 Output: 8 to steam per hour Up to 13 bar steam pressure with laterally attached steam pipe register with Weißhaupt Combi burner for gas and light oil with horizontal boiler feed water tank Contents 8,000 l with all-round piping and steel construction with steel chimney with exhaust heat recovery register system with Wulf electrical control cabinet
new
We offer high-performance automatic vacuum can seamer based on Ferrum F240,F506G, F706G, F708G(4,6,8 heads) beverage seamer. The basic machine has been completely upgraded and adapted for vacuum food cans. These seaming machines are affordable relativle fast avaible and reliable for long time. Capacity from 350 to 750 cans/min. Lid diameter from 53 to 102 mm Can diameter from 50 to 99 mm Can height from 35 to 120 mm Standard equipment: • With progressive pre-vacuum feeder • With complete seaming tooling • With lid feeding system into the vacuum chamber • The machine has variable speed with frequency converter control • Independent synchronized infeed with frequency converter control • Main Electrical Control Cabinet INOX • Vacuum pump connection and controlled by main cabinet - Speeds below are guaranteed regardless of the type of the lids (standard NEO, ea ...
used
Wiesheu Backkombi In-store oven/shared oven consisting of a convection oven and 2 floor ovens: Convection oven B4- E2 with exhaust air hood digital scroll control ( IS control ) Convection oven is 60×40 cm for 5 sheets 400V 3/N/PE 50/60 Hz Power 9.2 kW The following year of construction in stock: 3x2010, 2011, 4x2012 Shared ovens EBO 64 – 320 IS 600 digital scroll control 2 floors each 60×80 cm or 60x40cm sheets Year of construction: 2010, 2011, 2012 400V / 50 HZ / Power 2x 6.2kW (both together 12.4 kW) Fermentation cabinet has 2.1kW power In addition to the two ovens, a proofing cabinet with integrated is also integrated which has over 10 runs for 60×40 cm sheets Dimensions/Total Height: 210 cm Width: 95 cm Depth: 1040cm with door lever We have 8 of these ovens in stock.