137,924 used machines on RESALE, but how to find them? Machine Search
Automatic Adelski capping machine for automatically closing bottles with screw caps. Number of capping heads: 3, max. capacity: approx. 10000bottles/h, direction of travel: right → left. Including approx. 160000pcs caps. Weight: approx. 1750kg. Documentation and wiring diagrams available. Viewing possible by appointment.
Auction-ID: A1-46378-828
A combined rotary bottle filling and capping machine MAG Schymanski (filling monoblock) with capping heads renewed in 2023 is available. Capper manufacturer: Arol, capper type: Euro VA, filling system: rotary filler, filling valves: 28, capping heads: 4, filling capacity range: 3500bottles/h-6000bottles/h. Documentation available. An on-site inspection is possible.
Key data: 4500 mm, 5500 mm, 3500 mm
Built in 1978 Mount: Capto C 6 The axles : Y and Z have been overhauled With face plate extension: approx. 8500 mm. Crossbeam Support Extension Horizontal: 2950mm Main motor power: 55 Kw Control: Siemens 840D SL New control cabinet Face plate: New face plate drive. Hdrostatic face plate bearing Machine is energized All information without guarantee. Subject to prior sale Extensive tools Control station for faceplate monitoring
Fliegl Gigant ASW 268 push-off wagon built in 2007 with 32 m³ loading volume, hydraulic chopping flap and 20 t permissible gross weight. The wagon is suitable for transporting silage, shredded material, manure and a wide variety of bulk materials. The extensive detail shots show a galvanized main frame with good substance, a trailing axle with steering cylinder and an overall neat body. The side walls are in good condition without major deformations or rusting through. Chassis, axle mounts, spring packages and steering look original and undamaged. The large-volume tyres have an even abrasion pattern and a good residual tread depth. Equipment: · Fliegl ASW push-off system · Hydraulic shredding flap · 32 m³ loading volume · Tandem landing gear · Self-tracking axle with steering cylinder · Air brake system · Galvanized main frame · Tyres 700/50-26.5 · Hydraulic suppo ...
PROLIGHT SCALER WITH 2 NOVASTAR BOARDS WITH 2 OUTPUTS EACH Auction-ID: A1-48746-381
Inv. Num. : 9289 Type: Tandem 400 Producer: FAMAR Created: 2013 Parameters: Table diameter: 480 mm Max. workpiece diameter: 400 mm Max. length of the workpiece: 300 mm Number of Spindles: 2
Seamless Tube Hot Rolling Mill Equipment From European Seamless Tube production facility in France. Equipment Scope: Hot Rolling section combines Stiefel-type piercing and Assel-type elongation, followed by calibration and rotary sizing, enabling tight dimensional tolerances, low eccentricity, and flexible production scheduling. Learn More • Industrial-grade Hot forming and Rolling assets • Designed for seamless tube production - billet → pierced tube → elongated tube • Suitable for relocation, reuse, or integration into existing steel/tube operations Whatsapp +31 6 51199492 A. Reheating / Thermal Preparation Section • Billet heating furnace systems • Temperature conditioning systems for hot deformation readiness B. Piercing Mill Section (Core Tube Formation Stage) • Rotary piercing mill (seamless tube initiation) • Mand ...
Height=1.84 m, Overall length= 0.72 m, Overall width= 2.36 m, Description proofer for 4 carts climate control Lillnord PG-1000 used in working condition
Auction-ID: A1-46378-846
Equipment: height-adjustable conveyor, lid sorting and feeding system, conveyor belt with infeed and outfeed section, stainless steel construction, safety enclosure with interlocked safety doors, integrated electrical control cabinet and operator panel, the machine is designed to process Pano TO 100mm PP HOmao closures without liners. Inspection on site is possible.
potentially an old police vehicle, a mark of the location of the flashing lights Auction-ID: A3-46098-35754
Manual trolley, trolley, crane trolley, trolley drive, crane trolley, trolley, girder trolley, monorail trolley, running trolley, trolley, trolley, monorail trolley, pantograph trolley, cable trolley -Manufacturer: Vahle, pantograph wagon -Type: SWN 4/40 HS -Item No.: 0194691-5 -Dimensions: see photos -Number: 5x pantograph cars available - Price: per piece -Dimensions: 200/55/H130 mm -Weight: 0.5 kg/pc.
Body press, lamellar body press Homag Cabteq S-200, Ligmatech Profi MPH 410/25/07 A video of the running machine can be sent on request. A flexible scissor press with two movable pressure walls. Easy operation thanks to comfort package Travel speed 50mm/s in rapid traverse and 25mm/s in creep traverse when crimping the carcass. Pressing force of the vertical and horizontal press sides adjustable between 12 and 18 kN Setting the pressing time (timer) Pressing area maximum approx. 2500 x 1400 x 700mm Minimum pressing area approx. 250 x 150 x 250mm Working height approx. 300mm Instruction manual CE mark Original paint. Very good condition, see original photos. Dimensions of the machine approx. 4000 x 750 x 2350mm (LxWxH) Weight approx. 2200kg. The machine can be demonstrated on site by appointment. We offer only machines that are ready for demonstratio ...
Söderhamn chipper canter line, Consisting of, - Log infeed with step feeder, - Log transport with infeed, - Soderhamn chipper canter 240-15, - Outfeed conveyor, - Merry-go-round conveyor system, - Electric cabinets and control units, - Chip and waste conveyor system
CNC VERTICAL LATHE YOUJI MODEL YV-800E + C, EQUIPPED WITH FANUC 18T CONTROLLER, AND ROTARY TOOLS. Technical specification: - max turning diameter 1000 mm - max turning diameter 900 mm - max turning height 800 mm Working movements: - x transverse movement - 50 / + 810 mm - z vertical movement 880 mm - x rapid movement 20 m / min - z rapid movement 20 m / min - feed rate 0.001-500 mm / rev - feed rate in manual operation ( JOG ) 0 - 1260 mm / min - x feed motor FANUC AC 3.7 kW - z feed motor FANUC AC 3.7 kW Spindle: - spindle motor FANUC AC Alpha P40, cont. / 30 min 18.5 / 22 Kw - spindle motor gearbox 2 ranges manufacturer ZF, Germany - revolutions 10 - 800 k / min - spindle head A2-11 - spindle bearing dia. 330 mm Tools: - 12-station turret VDI - external turning holder 32 mm - internal turning holder dia. 50 mm Rotating tools: - max revolutions / min 3800 k / m ...
Filling and capping machine for filling plastic buckets of various sizes with yoghurt and quark. The plastic buckets are placed onto the conveyor belt from the stack of buckets in the bucket magazine. The buckets are sterilised with hydrogen peroxide and steam using a heating cartridge prior to filling, and the lids are sterilised prior to sealing. The product is filled into the buckets using a calibratable load cell until a specified weight is reached. The sealer places lids from the lid magazine onto the buckets and presses them firmly into place., Additional title: weight-based filling, Capacity appr.: 450 units/h based on a 6.1-litre bucket; depending on container size and product viscosity, Power: 11 kW, Voltage: 400 V, Frequency: 50 Hz, Heating / Cooling: steam 3 bar; 10 kg/h, Compressed air: 6-8 bar; Qmax = 300 l/min, Length: 3708 mm, Width: 968 mm, Height: 2442 mm, Formats: 1.3-l ...
Carousel-type machine with 24 closing points., Additional title: with 24 capping heads, Capacity of filling line: 5000 bo/h, Features: switch cabinet with control panel, 24 capping heads
Capper for aluminum screw caps. Capacity: approx. 14,000 bph. Suitable for capping NRW glass bottles with aluminum screw caps., Additional title: aluminum screw caps, Capacity approx.: 20000 bottles/h, Length: 1,9 m, Width: 1,25 m, Height: 2.2 m, Features: 8 capping heads
Combined de-capper for screw tops and crown caps. Combined unscrewer and uncorker. Equipped with 2 unscrewing and one uncorking hoods. The machine is operated with 2 hoods installed at the same time, which corresponds to 4 unscrewing/decorking heads. Velocity of the crate conveyor: 0,6 m/s., Capacity: 40000 bo/h, Pneum. working pressure: 10 bar, Power: 11 kW, Current: 25 A, Voltage: 230/400V, 24V control voltage, Frequency: 50 Hz, Length: 2900 mm, Width: 1260 mm, Height: 2000 mm, Formats: 0,5 l NRW, 0,5 l Euro, 0,33 l Steinie, screw caps and crown caps, Operation / Control: Simatic S7, Features: 2 Hoods with 2 heads each for screw tops,1 hood with 2 heads for crown caps, crate transport conveyor, crate lock with initiator, limit switch, cork detection, hydraulics, light barriers, hydraulic valve, door switch, compressed air connection, control cabinet
Four-station filling system for large cans and bottles., Additional title: Siphon filler, Capacity: 200 Fl/h, Filling places: 4 pieces, Power: 100 W, Voltage: 230 V, Frequency: 50 Hz, Length: approx. 1,3 m, Width: approx. 0,75 m, Height: approx. 2 m, Formats: 5 l Party cans; 2 l siphon bottle, Features: The containers are pressurized before filling, CIP pipes
Linear can filler with a rinser, filler, cap placer and sealer integrated into a single unit. Back-pressure filling is volumetrically controlled. Format adapters are available for all standard can sizes., Additional title: with 6 filling stations, Capacity: 2000 cans/h for carbonated drinks, Max. oxygen pickup on the filler: 25 ppb, Compressed air: IG 1/2, 6 - 10 bar, Length: 2774 mm, Width: 1100 mm, Height: 2000 mm, Formats: 12 oz and 16 oz cans, lid type 202 B64, conversion to other formats possible, Operation / Control: Siemens Simatic S7, Features: 6 filling stations, 7 inch touchscreen with swivel arm, infeed screw, product buffer tank (3 bar), servo driven seamer, tunnel for can rinsing after filling, motors by SEW
Carousel for sealing swing-top bottles., Capacity: 18000 bottles/h, Features: Height adjustment, control device for closing pressure, mechanical / pneumatic testing of shackle tension, high-pressure injection device, rinsing and swelling device
Carbonation system with integrated buffer tank, for the production of CO2-containing mineral water., Additional title: impregnation plant, Capacity: 20000 l/h, CO2 content: 12 g/l, CO2 carbonisation pressure: 7 bar, Max. tank pressure: 8 bar, Current: 69 A, Voltage: 230/400 V, Frequency: 50 Hz, Heating / Cooling: Connection pressure steam: min. 0.5, max. 1 bar, Water: Connection pressure: min. 4, max. 5 bar, Compressed air: min. 7, max. 10 bar, Length: 2 m, Width: 2,4 m, Height: 2,5 m, Weight: 4000 kg, Operation / Control: Siemens Simatic S5, Features: Saturation Tank (content = 750 l) with fill level detectors as a carbonisation tank, measuring writer (ABB), circulating pump (Hilge), various ventils
Vertical cylindrical-conical tank with insulation and aluminium trapezoidal sheet metal cladding., Additional title: vertical insulated tank, Total content: 13600 l, Position: standing on 4 feet, Base construction: cylindrical tank with conical bottom, Features: Insulation
Trap filter housing for post-filtration of beer or other liquids. Available in any size, capacity and selectivity. Manufacturer: Sartorius/Seitz/Pall/Filtrox/Eaton Please let us know your application (medium, flow rate, selectivity) and we will find a suitable solution for you., Additional title: Post-filtration, Material: stainless steel, Position: free standing, Base construction: Cylindrical housing on tubular feet with spherical caps, Features: Pressure gauge, housing with clamping screws or clamping ring
Activated carbon filter for the treatment of drinking water after treatment with chlorine dioxide, with pressure gauge and various connections., Additional title: drinking water treatment, Volume: 2250 l, Max. working temperature: 120 °C, Max. working pressure: 6 bar, Width: 1 m, Height: 3,5 m, Weight: 300 kg, Material: stainless steel, Position: vertical, Base construction: on feet, Features: pressure gauge, various connections
Case packer für 10 and 6 packs of 330 ml disposable bottles. Inclusive videojet printer dating machine construction year 2016. The line is controlled via a S7 Touchpad., Voltage: 400 V, Compressed air: 6 bar, Length: 5,4 m, Width: 1,15 m, Height: 1,95 m, Weight: 700 kg, Base construction: on feet, Features: Inkjet Dating machine construction year 2016, hot glue unit
Belt width: 700 mm, Length: 1450 mm, extendable to 1800 mm, Power: 3 x 400V, 50Hz, 0.18kW, Dimensions: 1450 x 1000 x 1200 mm, Weight: 175 kg
Offer 35503 Technical data: - 6 pieces of 90% extendable roller bearing drawers - Drawer size approx. W 450 x D 530 mm - Drawer heights 3 x H 85 ; 2 x H 130 ; 1 x H 180 mm - no key available - Cabinet space requirements approx. W 540 x D 630 x H 1000 mm - Weight 80 kg
NEW, suitable for CAT TH407
Overview This compact capping machine was manufactured by the German company ALWID in 2016. Major components are made of stainless steel. It is designed to process t-cork glass bottles as an inline system. The machine is equipped with a capping head for Ø34/19 mm and height 22/13 mm t-corks. Due to our relation to ALWID, we can offer change over parts for different bottles and caps immediately. Technical data: Mobile stainless steel frame T-cork head for Ø34/19 mm and height 22/13 mm cap-chute for Ø34/19 mm and height 22/13 mm Sorting unit via vibrating feeder bowl with noise insulation hood Conveyor belt Stopper Protective housing with safety switch Electrical control via SIEMENS Logo
Overview The Zalkin screw capper top is made of stainless steel and has 22 capping heads. The running direction is from left to right (clockwise). It comes with an electronic height adjustment. 28 mm aluminum closures have been processed. The maximum output is 36,000 bottles per hour. Tech Specs: Pitch circle diameter 731.11 mm Number of closing elements 22 Pitch 104,4mm Running direction left-right (clockwise) Material: SST Electronic height adjustment Closures: 28mm aluminum closures Accesories: Six new closing elements Closure sorting unit Spare parts lists and technical documentation
Overview The solo screw capper was manufactured and taken into action in 2007 by Adelski. So far the machine was used in a winery in Germany. The machine is becoming free, as the products which have been produced on that line have been shifted to another filling line. Besides the solo screw capper there is the cap feeding and orientating system, which belong to the scope of supply. The screw capping elements will be kept at the production facility as these will be used in another machine. On request we can offer suitable screw capping elements. Tech Specs: Capacity: up to 12,500 bph Number of capping places: 5 Working direction: counter clockwise Control: Siemens S7 Accessories: Pneumatic cap feeding system Cap orientation system for long caps
Used Crown Bevcorp 40 valve filling monoblockTechnical Specifications & Performance DataThis used can filling monoblock combines a Bevcorp UB40 rotary can filler with an Angelus 61H seamer, delivering dependable performance for industrial packaging and beverage production. The system is configured for aluminum cans and is supplied with tooling for multiple can body styles. It is an excellent option for a second hand solution within a used bottling line where reliability and ease of integration are essential.Filler model: UB40 rotary can fillerFiller valves: 40Seamer model: 61HOverhauled in 2019Containers: Aluminum cans (standard and sleek)Ends: 202 can endsSpeed: 20.000 BPHConfigured can sizes: 12 oz (approx. 0.355L) and 16 oz (approx. 0.473L)Included components: Can transfer conveyor, electrical panel, lubrication panel system, stainless steel mechanical safety guarding, handling parts, ...
Technical Specifications & Performance Data The New Filling / Capping Monoblock 24.6 is engineered for accurate, high-speed oil filling and secure press-on capping in a compact, hygienic frame. Designed for modern industrial packaging environments, it combines weight-based filling precision with consistent closure application to maximize uptime and quality. Rated output: up to 11,000 bottles/hour (application-dependent) Filling system: load cell–controlled, gravity-fed, contactless nozzles; atmospheric operation with weight-based dosing Accuracy: per-valve weigh control; gram-level resolution per liter for consistent net-weight results Filler configuration: 24 filling valves Capper configuration: integrated press-on capper, 6 heads Closure type and size: plastic press-on caps, 28–30 mm Bottle formats: 0.06 L, 0.375 L, 0.50 L, 0.75 L Container material: PET (primary compatibility) Pro ...
maximum number of results exceeded
please refine your search
30 € 
