ca used for sale

File cabinet system wood dark, top plate wood décor, front anthracite, sideboard approx. 120x120h cm, filing cabinet shelf combination approx. 250x220h cm

A deposit of €1500.00 is required in order to submit a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. ATTENTION: The lot includes the following works that must be carried out in this time order no later than 30 days from the award. The total removal of the goods and correct disposal of the remaining NON-FERROUS materials after removal. The complete floor cleaning of the respective indoor and outdoor area. Access to the site will be allowed only after the delivery of all the documentation necessary for safety on site, according to the regulations in force and the specific provisions of the seller. Liability insurance is required for any damages. Surplex will monitor the progress of the work to ensure that the deadlines are met. An advance payment will be required for surveillanc ...

A deposit of €150.00 is required in order to submit a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. Magnetic table size 2000x400 mm Tables, utensils and accessories included Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-43861-2

A deposit of €100.00 is required in order to submit a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. Magnetic plate size 900x500 mm Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-43861-3

Offered is a WrapAroundPacker 420 / Combiline. Application area: Packaging of individual containers, Cycle rate max: 50cycles/minute, Format flexibility: 0.33l, 0.5l, Preserving jars, Adhesive system: Spot or line hot melt application system, Inspection by appointment possible.

LAMINA GLUELINE 3200 GL, • Year of construction: 2011, • Sheet format min.: 500 x 700 mm - 2x, • Sheet format max.: 1600 x 1600 mm - 2x, • Output: up to approx. 1000 pieces/h, • Material types: F, E, B, C, CB, EB and EE shaft, 1-piece and 2-piece base, • Glue type: Hot-Melt (2 hot-melt valves), • Application type: Caterpillar, • Stacking height including pallet: all heights possible (delivery instructions)

Case Erector BEDO VA988 + Year of construction 1997 Machine no. VA 988.1.52490, serial no. 4705 Output: 20 cart./min. with automatic format change. format range: L 200-650mm W 150-460mm H 100-500mm. Carton outlet height: 600 mm Electrical data: Voltage: 400V 3 phase Frequency: 50Hz Connected load: 7.3 kVA 18 amps Operating pressure: 5-7 bar The machine is equipped with a PLC control make Siemens S 5. Machine weight: 1,500 kg machine dimensions: Length: 3000mm Depth including cardboard magazine: 2100 mm Height : 2100mm Machine weight: 1,500 kg Bottom closure with NORDSON 3400 hot-melt device. If you need more information. We are here to help! Please contact us using the contact form or give us a call

Waldner Dosomat 16, rotary, 6-head filling machine for aseptic filling of cups. Capacity: up to approx. 9.000 cups/hour. 3x Format sets: round 95 mm, square 65x65 mm and square 95x95 mm. Format change in the shortest possible time by the tool-free exchange of quick-change format plates, push-in cup destackers and lid magazines allow immediate response to the daily market requirements and to the realisation of strategic decisions in terms of cup design changes., Working principle:, - Automatic cup de-stacking storage buffer magazine for ± 15 minutes buffer (preformed cups)., - Cup de-stacking station., - Cup sterilisation using H2O2 and hot sterile air. All the necessary valves and lines are situated in a sterile module next to the machine. The cups passing through it are subjected to sterile air enriched with H2O2 and then finally dried with hot sterile air. In this way, especially moul ...

1) sander top VEGA 311 MRL Sanding width 1100 mm. Working thickness 3 to 160 mm working height 950 mm Sanding belt dimensions 1120 x 2620 mm. Equipment: 1) cutterblock diameter 180 mm 22 kW 47m/s 2) rubber contact roller diameter 220 mm 22 kW 18m/s 3) combi roller/sanding shoe 12.5/16 kW 9/18m/s sanding belt blow off 4) Finishing brush unit at output 0.75 kW diameter 150 mm feed speed adjustable 2.5-13 m/min 3 kW pneumatic sanding belt tension motor height adjustment 0.75 kW extraction rate: 11800 m?/h 2) bottom sanderVEGA U 311 MRF Sanding width 1100 mm. Working thickness 3 to 160 mm working height 920 mm Sanding belt dimensions 1120 x 2620 mm. Equipment: 1) cutterblock diameter 180 mm 22 kW 47m/s 2) rubber contact roller diameter 220 mm 22 kW 18m/s 3) combi roller/sanding shoe 12.5/16 kW 9/18m/s sanding belt blow off 4) Finishing brush unit at output 0.75 kW diameter 150 mm feed speed  ...

Top/bottom calibrating line: Bottom sander Number of sanding units: 4 1. Steel roller with motor 55 kW 2. Steel roller with motor 45 kW 3. Rubber roller with 90 Shore, motor 30 kW 4. Rubber roller with 90 Shore, motor 22 kW 5. Cleaning brush Variable Feed Speed Vacuum workpiece suction Top sander Number of sanding units: 4 1. Steel roller with motor 55 kW 2. Steel roller with motor 45 kW 3. Rubber roller with 90 Shore, motor 30 kW 4. Rubber roller with 90 Shore, motor 22 kW 5. Cleaning brush Variable Feed Speed Vacuum workpiece suction

Sanding line with working width 1300 mm, constant working height. Line consisting of: - Undersander 2 sanding units 1 x Combi unit with contact roller 60? shore and segmented shoe, motor 22 kW 1 x Segmented shoe, motor 15 kW 1 x Brush Vacuum workpiece suction, 7.5 kW motor -Intermediate transport: 4200 x 1300 mm -Top sander 2 sanding units 1 x Combi unit with 70? shore contact roller and segmented shoe, 22 kW motor 1 x Segmented shoe, motor 15 kW, 1 x Brush Vacuum workpiece suction, motor 7.5 kW Feed speed: infinitely variable Table spring-loaded or fixed adjustable

Roller length 1820mm Roller diamter 145mm Rubber thickness 9mm Rubber hardness SHORE 50A Working plane height 910mm Max passage between rollers 120mm Forwarding speed 15,2 m/min Requested air Bar 4/8 Motor power 0,37 kW

Throughfeed carcase clamp Carcases: Width: 280 to 1320 mm Height: 300 to 2300 mm Depth: 150 to 800 mm. Working height in the press: 500 mm Mechanic clamping (electrical motors)

Electrical spindle drive min/max furniture length: 20 cm / 2m50 min/max furniture height: 20 cm /1m25 max furniture width: 65 cm Working height: 50 cm Pressure horizontal and vertical: 0 - 1200 Kp Total power installed: 3 kW

Metal cabinet approx. 60x130 cm, shelf, hardly any contents

Hinged door steel cabinet approx. 90x190 cm, without contents

Chiller 2x CARRIER 30RW-245-A0026-PEE-- year 04/02/2010, S/N 12B001197, S/N 12B001196, 38 kg R407C, weight 1,471 kg, internal NSHV 6Q4, refrigeration machine 1+2, with various heat exchangers, overflow vessels, pipelines, controls, actuators etc., volume without heating accessories

Card milling system MÜHLBAUER consisting of 3 elements 1 pc. mod. SCM 5000 built 1999, S/N 1827, 230 V AC, 1 pc. mod. SCM 525, built 2012, S/N M-10416, 400 V AC, total 2 units

Control dispenser for card handling KAS 354/2006-11, 400VAC 50Hz, touch panel SIEMENS Simatic, control cable, pallet

PLC Card Withdrawal Handling KST System No. 418/2006-12, PLC control incomplete, control cabinet, not exactly visible

PLC Card Withdrawal Handling KST System No. 037/2007, 400 V/50 Hz, PLC control, control cabinet, not exactly visible

PLC Card Withdrawal Handling KST System No. 009/2007, 400 V/50 Hz, PLC control, control cabinet, not exactly visible

PLC Card Withdrawal Handling KST System No. 035/2007, 400 V/50 Hz, PLC control, control cabinet, not exactly visible

Pump stacker truck SCHÄFER SHOP PS0415 Load capacity 400 kg Lifting height 1,500 mm Year of manufacture 2017, S/N 18011194, Weight 91 kg

Injection moulding machine/ card removal system FERROMATIK MILACRON EE155 built in 2007, S/N 427087, clamping force 1,550 kN, international size 1,550H-300, injection pressure 1,943 bar, displacement 154 cm³, 400 V/50 Hz, motor 19.7 kW, heating 11.2 kW, weight 7.4 t, control Mosaic, touch panel SIEMENS Simatic, machine no. 163

UNI-CARRIERS ULS89008/01 electric reach truck, load capacity 1,200 kg, lifting height 5,700 mm, not ready for use

Injection moulding machine/ card removal system FERROMATIK MILACRON EE155 built in 2007, machine no. 427100, clamping force 1,550 kN, international size 1,550H-300, injection pressure 1,943 bar, displacement 154 cm³, 400 V/50 Hz, motor 19.7 kW, heating 11.2 kW, weight 7.4 t, CNC control, touch panel SIEMENS Simatic, w. 036/2007, Masch.-Nr. 162

Electric forklift EFG-1000 load capacity 1,000 kg lifting height 2,950 mm, no tines, crane attachment DURWEN KF 15, built in 1995, load capacity 1,500 kg, dead weight 120 kg, S/N 59501, defective

Hanging file steel cabinets 2 pcs. 2x A4 side by side, 4 drawers, 1 pc. 1x A4, 4 drawers

Ref.: 2500.0000 Auction-ID: A1-45803-93

Proofing trolley with puller for WP Matador Stainless steel proofing trolley mobile with 10 ALU pullers Pull-off apparatus with upper trigger good cotton cloths for WP Matador oven Used equipment

Overview  The filling line for gable top packaging was manufactured in 2008 by the Norwegian company Elopak. It consists of a carton filler, cap applicator, and packer. The filling line is still installed, but no longer connected. However, it can be inspected in person. Technical Details  Capacity: 8,000 cartons/ h Formats: 0,5l 0,75l 1,0l Operating hours: 32,500 Scope of Delivery  Aseptic Carton Filler | Elopak | S-PS80HA | 2008 3x Cap Applicator | Elopak | PLA-S30 | 2009 Tray Packer | OYSTAR A+F | Traypacker TF | 2011

A Polo slant bed filter with vacuum filter endless belt design and enlarged storage tank is available. Capacity: 5000l, max. operating temperature: 60°C, flow rate per minute emulsion/oils: 650l/200l, dirt chamber capacity: approx. 400l, vacuum chamber capacity: approx. 140l, connected load: 5kW. Filter unit dimensions X/Y/Z: approx. 2450mm/1650mm/1550mm, filter unit weight: approx. 1150kg, total weight: approx. 3000kg. Documentation available. An on-site inspection is possible.

Used line for packing beer bottles in cartons from Meypack. Specifications Performance: 60 packs/minute with 2x5 (10 bottles) 40 packs/minute with 4x5 (20 bottles) Packaging Type: Wrapped Carton Box Carton Dimensions: Length: 120 - 300 mm Width: 210 - 400 mm Height: 100 - 350 mm Packaging Formation: 2x5 & 4x5

Inv. Num. : 9082 Type: SKJ 8 NC Producer: TOS Created: GO 2020 Parameters: Control system: MEFI CNC 872 Max. workpiece diameter: 800 mm Max. workpiece height: 630 mm Max. workpiece weight: 2000 kg Length: 2000 mm Width: 2550 mm Height: 3700 mm Weight: 10000 kg Equipment: Hydraulic table clamping Electric rotation of the cutter head Ball screws GO 2020: Complete machine overhaul with conversion to a new MEFI CNC 872 control system Conversion from the original hydraulic drives to Yaskawa servo motors New electrical installation New hydraulic system and central lubrication

Truck tension belts filled with various cardboard boxes, not spotted more closely

Pallet truck MIC load capacity approx. 2,000 kg, built in 1989

Diesel, capacity 220 lt, never used Overall dimensions: 900 x 700 x 700 mm Weight: 30 kg Auction-ID: A7-45833-183

Diesel, capacity 220 lt Overall dimensions: 900 x 700 x 700 mm Weight: 30 kg Auction-ID: A7-45833-11

Thermal imaging camera, LCD display, temperature range -10 + 400 degrees, lithium battery with USB charge, never used Overall dimensions: 200 x 200 x 200 mm Weight: 1 kg Auction-ID: A7-45833-159

Endoscopic sewer camera, 20 meter probe length, waterproof hydraulic camera and vision monitor. Never used, packed in its original packaging Overall dimensions: 600 x 600 x 400 mm Weight: 10 kg Auction-ID: A7-45834-204

Endoscopic sewer camera, 20 meter probe length, waterproof hydraulic camera and vision monitor. Never used, packed in its original packaging Overall dimensions: 600 x 600 x 400 mm Weight: 10 kg Auction-ID: A7-45834-345

Type: Electric carriage / electric cart Make: CAPTOK Model: CK-MCE Serial No.: CK-MCE241209 Year: 12/2024 Condition: New / unused Motor: 3000 W Controller: 60V - 2200W Battery: 60V - 58A Safe speed: 15-30 km/h Battery endurance: approx. 80 km Configuration: Classic-style passenger carriage with canopy Drive: Electric drive Color: White / red with gold trim Remarks: Decorative electric carriage, suitable for leisure and tourist transport; unused machine. Auction-ID: A7-45479-1

Diesel, capacity 220 lt Overall dimensions: 900 x 700 x 700 mm Weight: 30 kg Auction-ID: A7-45834-11

Thermal imaging camera, LCD display, temperature range -10 + 400 degrees, lithium battery with USB charge, never used Overall dimensions: 200 x 200 x 200 mm Weight: 1 kg Auction-ID: A7-45834-315

Consisting of 4 digital calipers (150 mm), never used Overall dimensions: 200 x 100 x 200 mm Weight: 2 kg Auction-ID: A7-45833-312

Diesel, capacity 220 lt, never used Overall dimensions: 900 x 700 x 700 mm Weight: 30 kg Auction-ID: A7-45833-261

Diesel, capacity 480 lt, never used Overall dimensions: 1000 x 800 x 700 mm Weight: 40 kg Auction-ID: A7-45833-158

Consisting of 4 digital calipers (150 mm), never used Overall dimensions: 200 x 100 x 200 mm Weight: 2 kg Auction-ID: A7-45834-109

Diesel, capacity 220 lt, never used Overall dimensions: 900 x 700 x 700 mm Weight: 30 kg Auction-ID: A7-45834-261