129,101 used machines on RESALE, but how to find them? Machine Search
MEP AVT400 Capping machine Serial: 271221 2021, Stainless capper, Robust and easy to use capping machine suitable for applying ROPP, screw caps onto bottles with screw thread necks. Max bottle diameter 195mm, max bottle height 355mm, Up to 400 - 600 bottles per hour, mobile, 1Ph
Key data: 3600 mm, 4200 mm, 4800 mm
Specifications Control Siemens Sinumerik 840 Dsl Main dimensions and travels Face plate diameter 3,600 mm Circumferential diameter (max.) 4,200 mm Workpiece height (max.) 4,800 mm Total height of the machine 8,700 mm Maximum workpiece weight 80,000 kg. Table base Y Horizontal table displacement 2,000 mm Crossbar Vertical adjustment of the crossbeam in 100 mm increments 2,800 mm Crossbeam Support (Right) Horizontal adjustment support - 1,800 to + 2,200 mm Vertical displacement of the chisel slide valve 1,500 mm Cross-section of the chisel slide 240x240 mm Tool stations 20 pcs. Side Support (Right) Vertical adjustment support 2,800 mm Horizontal displacement of the chisel slide valve 1,000 mm Cross-section of the chisel slide 240x240 mm Turning diameter max./min. 4500/2500 mm Tool Changer Main Drive: Main motor power 105 kW Face plate speed ...
Used Meyn model 20U carcass washing device for the inside and outside. New 2002.
Cap conveyor, feeding system, closure conveyor, closure conveyor system, dosing container, crown corker, screw caps. 4 chambers. Conveyor bunker silo for crown corks screw caps conveyor conveying system, 4 chambers, cabins, boxes.
With contents, suitable for lot 3009 Auction-ID: A1-46480-3010
Drawer cabinet filled see pictures Auction-ID: A7-46460-644
Product description (Item no. KAR251) 1 covered cantilever racking system with canopy and rear wall as well as available drainage Total length: approx. 83 linear meters. Make: OHRA System: Cantilever arm 60 one-sided design Year of Make: 2015 galvanized version 50 Pieces Stand Stand height: 6,000 (5,740 + 273) mm 50 Pieces Feet Foot length: 2,800 mm Profile: 273 x 136 mm Column load per side: 1,500 kg/ max. approx. 100 pieces arms 2 = pieces per stand Type: K60K Arm length: 2,500 mm Profile: 140 x 75 mm Arm load: 500 kg/ max. Load centre of gravity: 1,250 mm Wheelbase: approx. 1,500 mm with cross bandages and arm bridges between the cantilevers 3 pieces per box Profile: 82 x 47 mm Length: 1,400 mm Rising roof arms Length: 3,500 mm Profile: 120 x 65 mm Webs Length: approx. 1,350 mm Profile: approx. 82 x 47 mm Condition: used Full ...
Drawer cabinet with contents See pictures Auction-ID: A7-46460-574
Connected load 380V 16A Pneumatic connection 6bar Total length of the machine 4300 mm Total width of the machine 1300 mm Highest press length 2650 mm Press width 1000 mm Press height 1000 mm Press pressure up to 150 bar Electric width adjustment with digital display Foot switch for pressing
Machine for the processing of mixed waste cables, especially with fine conductors and stranded cables, The plant was most recently used for the post-cleaning of residual plastics from other cable recycling plants. Thanks to the rotor system with the 24 knife segments and the large flywheel masses, the system is also suitable for manual operation. The machine has a cooling unit that optimizes the granulator with a flow temperature of 0.5 °C for the use of heat-sensitive cables, such as NYM, etc. The control electronics of the system enable fully automatic operation in a line with pre-shredder, conveyor belt, dosing accumulator, etc. The machine includes several sets of knives and different sieves. In conjunction with a suitable pre-shredder, the system can process up to approx. 250 kg of old cable. The system was completely overhauled by us and equipped with new tools and par ...
ZIM Hülsta Cabinet Press NOW Easy Make: ZIM Hülsta-Werke Type: NOW Easy Ser.-No.: 380125028 Body max. 260 x 1100 mm 2 supports at the bottom, sliding 2 press beams at the top, movable Beckoff Control Panel Roller track 4500 x 600 mm Roll width: 500 mm Overall dimensions: W x D x H 3300 x 1800 x 3600 mm More items - new and used - can be found in our shop! International shipping costs on request!
Condition: unknown. Probably original packaging. Auction-ID: A1-45996-246
Body Press Frame Press Body max. 3000 x 2000 mm Protective fence system Sick C2000 Safety Light Curtain Beijer Electronics E300 Operator Interface Control Panel Workpiece Discharge Roller Timing Belt Conveyor Switchboard Mitsubishi Q2ASCPU programmable logic controller Mitsubishi A1SX81 Guarding The C 2000 safety light curtain serves as a hand guard for Securing danger points on machines and systems. More items - new and used - can be found in our shop! International shipping costs on request!
Condition: used unchecked. Auction-ID: A1-45996-258
Beckhoff C6220 Industrial Control Cabinet PC for Heinen( Diana Control) Control Jagenberg Diana Pro. Used, tested.
length: 700 mm width: 700 mm height: 750 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
COC certificate, 1050kg axles Auction-ID: A3-44483-30908
SIKO IF09C/1 - 0002 Interface converter for CAN bus, Jagenberg Diana Pro. Used, tested. Gateway modules for connecting SIKO sensors and displays to standardized fieldbus systems. There are three bus connections available. SIKO offers a specific transmitter for each connection. Up to 31 subscribers can be connected to the Profibus or CAN bus via the RS485 interface.
Tool transport trolley with shaft carrier Width 1,400 mm x Depth 600 mm Height 1,300 mm with wave carrier Weight approx. 110 kg
Drawer cabinet with content see pictures Auction-ID: A7-46460-477
Roller Chassis - Carrier Chassis YALE Payload 2,000 kg Flange width 66 to 220 mm Flange thickness max. 25 mm Smallest curve radius 1.15 m Hand force at nominal load 7 kg Weight approx. 16 kg 16 units in stock - unit price
faceplate diameter: 1250 mm swing diameter: 1400 mm turning height: 980 mm table load: 3 t Control: Siemens type: Sinumerik 880T x-axis: 1000 mm z-axis: 1000 mm w-axis: 600 mm c-axis: 360 ° live tooling: Tool changer: 62 Pos. chip conveyor: coolant: grinding head: horizonzal grinding head: vertical power capacity - table: 69 kW total power requirement: kW weight of the machine ca.: 26 t dimensions of the machine ca.: 8,7x7x5,2 m • Table speed / Drehzahl der Planscheibe: 2 Getriebestufen, Drehzahl = 4,5 – 500U/min • Ram section / Stößel Querschnitte: 240mm x 240mm • Live tools speed / Drehzahl der angetriebene Werkzeuge: o Schleifspindel waagerecht: 3000U/min o Schleifspindel senkrecht: 3000 – 6000U/min o Fräsen: 10-2000U/min • Live tools power / KW Leistung der angetriebenen Werkzeuge: o Schleifspindel waagerecht: 3kW o Schleifspindel senkrecht: 3kW ...
-4X DW oil valve -PTO 540/1000 -Fronthef Zuidberg -Adjustable tow bar -No documents Auction-ID: A3-43524-30118
COC certificate, 2 axles of 1050kg Auction-ID: A3-44483-30873
Vehicle starts, drives and performs all functions. A new engine was installed at 161000 KM Invoice available Auction-ID: A3-44483-5113
length 3900 mm; width 1800 mm; height 2100 mm; awning trailer; galvanized steel frame; wooden partitions; head holders; Jockey wheel Auction-ID: A3-44483-30912
faceplate diameter: 1320 mm swing diameter: 1400 mm turning height: 800 mm workpiece weight: 6000 kg cross rail adjustment: 800 mm Tools changer for 12 tools: chip conveyor: coolant tank: Control: Sinumerik 840 D transmission ratio: 3 daylight table - ram: 950 mm slide adjustment: 750 mm total power requirement: 60 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 7,5x5,5x4,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 3100 mm swing diameter: 3600 mm turning height: 3600 mm control: Fagor 8035 table load: 35 t turning speeds: 0,32 - 40 U/min max. ram stroke: 3000 mm table load: 35 t turning speeds: 0,32-40 U/min total power requirement: 70 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 1100 mm swing diameter: 1250 mm turning height: 1300 mm Control: Siemens type: 805 workpiece weight: 4000 kg Tool changer: 10 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Condition: used unchecked. Auction-ID: A1-45996-308
faceplate diameter: 1200 mm swing diameter: 1400 mm turning height: 1250 mm cross rail - adjustment: 600 mm work spindle adjustment: 750 mm Tools changer for 12 tools: total power requirement: 69 kW weight of the machine ca.: 25 t dimensions of the machine ca.: m reconditioned The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key features: Total area: approx. 200 m² Interior height: 2.20 m Direct driveway access from the municipal road Private overdraft useful as a maneuvering area, parking or goods handling Intended use: Storage/warehouse accessory to the residence, ideal for the storage of equipment, materials or machinery. Cadastral data: Municipality of Pesaro – Sheet 21, Particle 617, Sub. 4 Category C/2, Class 2 – Consistency: 248 m² – Cadastral income: € 678.83 State of conservation: Good overall condition; rough flooring, electrical system and connection to the municipal aqueduct present. Urban planning and cadastral compliance: Small discrepancies were detected that could be remedied through urban planning practice pursuant to Presidential Decree 380/2001, at the expense of the successful bidder. Participation subject to the payment of a deposit equal to 20% of the price o ...
maximum number of results exceeded
please refine your search
1 € 
