ca used for sale

Description Brand CAME Model G6000 ID 7332 Status Active Price 500 € + VAT Location Oradea (RO) Road barrier CAME G6000. Length: 6 meter. ExWorks. Price is negotiable. Contact Tel.: +40-359/175.575 Fax: +40-259/426.248 Mobil: +40-743/177.040 ; +40-740/221.698 Technical inspection can be organized at least 24 hrs before the due date We speak English. Wir sprechen Deutsch. (+40-740/221.698 ) Hablamos Español. Beszélünk magyarul. (+40-743/177.040 ) Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervam dreptul la greseli, modificari si vanzare prealabila.

For sale is a Logcomp/Collamat pallet labeler / label machine, type: Collamat 3600, year of construction: 08/2012, 400/230 V, 50 Hz, 3/16 A, machine number: 100367, dimension

Used new water-cooled Caterpillar turbocharger for marine diesel ! P/N : 6N-7960 S/N : 8106QHM62929

Make and Model: GE WHG-125 Year: 2011 Hours: 6000 approx. Year : 117 HZ : 50/60 Voltage: 400/480 V Scope of supply: Each ORC skid has its own heat exchangers for evaporation and condensing of the refrigerant (working fluid). You would need to install a water heat source and a water cooling circuit, no cooling towers or blowers are included with what we have in storage. Condition: These units have been decommissioned and been in storage since May 2016. Unit 1 and 2 had a report of an MBC fault (magnetic bearing controller). Unit 3 has several parts missing due to a failure in the power electronics. Some parts of the Power electronics, PLC, speed drive for the refrigerant pump are missing. Unit 4 had a failed heat exchanger and filled the ORC with water, would need stripping to determine the full extent of the repairs needed. Extra: These units run on a working fluid (refri ...

Key data: 117

Make and Model: GE WHG-125 Year: 2011 Hours : 16,000 & 35,000 Capacity kW: 117 HZ : 50/60 Voltage: 400/480 V Scope of supply: Each ORC skid has its own heat exchangers for evaporation and condensing of the refrigerant (working fluid). You would need to install a water heat source and a water cooling circuit, no cooling towers or blowers are included with what we have in storage. Condition: The containerised units were decommissioned towards the end of 2018. Both of the units were operational before decommissioning. Unit 1 has the upgraded 3600 MBC (magnetic bearing controller). Both of the units are containerised at present but can be removed. Extra: These units run on a working fluid (refrigerant R245Fa) that does not come with the units as this was sent for recycling after commissioning. This will need to be purchased and filled during installation and commissioning.  ...

Make and Model: GE WHG-125 Year: 2011 Hours : 7155 and 6849 Capacity kW: 117 HZ : 50/60 Voltage: 400/480 V Scope of supply: Each ORC skid has its own heat exchangers for evaporation and condensing of the refrigerant (working fluid). You would need to install a water heat source and a water cooling circuit, no cooling towers or blowers are included with what we have in storage. Condition: These units have been decommissioned and been in storage since May 2016. Both of These units were operational at the time of decommission. Extra: These units run on a working fluid (refrigerant R245Fa) that does not come with the units as this was sent for recycling after commissioning. This will need to be purchased and filled during installation and commissioning . Price: €70,000 each

Cast iron bed Length: 3970 mm Width: 2060 mm Useful surface (L x W x H): 3910 x 2000 x 350 mm Delivered with 6 levelling feet Weight: 7 T MACHINE IN OUR STOCK IN FRANCE.

Cast iron clamping cube Dimensions(only the cube): L 2000 x H 1500 x Depth 1200 mm 4 faces with T-slots T-slots dimensions: 58 x 36 mm Total height with enhances angle plate: 2050 mm Total height with rail: 2700 mm Weight: approx 7 T MACHINE IN OUR STOCK IN FRANCE.

Table diameter: 2,000 mm Max diameter of workpiece: 3,000 mm Main drive: 60 KW Speed rotation of the table: 2.8 - 162 rpm Max workpiece height under the cross member: 2,500 mm Travel RAM: 1,750 mm Tool magazine: 12 workstations Machine Weight: 35 t Accessories: Grinding spindle and various tool holders 3000 rpm Wheel diameter 250 mm

CATERPILLAR MARINE ENGINE 3412 671 HP/500 KW / 1800 RPM

CARRIER 30RA 060 B Brand:CARRIER Type:30RA 060 B Stock number:M22-4556 Cooling capacity:57 kW Number of fans:1 Refrigerant:R407C Refrigerant Content:15 kg Voltage:400 Volts Dimensions:2071 x 1081 x 1329 mm Weight:597 kg Year:2005 Number in stock:2 piece(s) Price:Quotation request Description: Nice air-cooled Carrier water chiller with 2 scroll compressors. This chiller is equipped with coated fins, a heat exchanger, a Pro-Dialog Plus controller and a hydro kit (water pump, expansion vessel). Mentioned capacity at a water temperature of +12/7°C and an ambient temperature of +35°C. Please visit also our website: used-refrigeration

1 used filling line for ironing bottles. Original in use for filling beer (2C) in 330 ml printed glass bottles (diameter 60 mm x height 230 mm) with handle closure, with a capacity of 1,900 bottles/H. Additional format parts for 500, 750 and 1,000 ml bottles. E- connection 415V/50Hz. System has run very little and is in top condition! Consisting of: Task table, with 5 rows of stainless steel chains. Stainless steel frame, with inliner and adjustable drive. Built 2006. 1 bottle transport system for empty and full bottles. Stainless steel chain on stainless steel frame. Built 2006. 1 Rinser/Filler Monobloc, Make Cime Careddu (Italy), Type DPS 9-8, built 2006, 9-head rotating Rinser, no-bottle/no-spray, 8-head rotating back pressure filler with 2x pre-evacuation (built-in vacuum pump). Heights adjustable. Min/max bottle diameter 50 - 90 mm, min/max bottle height 180 - 350 mm. Drain CIP. Wi ...

Manufacturer: Canon Type: iPF770 Condition: very good (refurbished 2021) Printing technology: Inkjet Function: With scanner, cloud-ready Connection Type: USB Supported colors: 5 colors - cyan, magenta, yellow, black, matte black pigmented Nozzle configuration: 15,360 nozzles Minimum size ink droplets: 4 pl Ink cartridge configuration: 6 individual containers Used bought in 12/2018 New print head incl. general overhaul in April 2021 (invoice controller system is available). Since overhaul max. 25 printouts A0 (mostly photo quality to use print head – risk of drying out) Cyan almost empty, but replacement available. Including the following colors: - 1x PFI-107 MBK (matt black) - 1x PFI-107 M (Magenda) - 1x PFI-107 C (cyan) Accessories Paper: - HP Universal Gloss Photo Paper 200g/m² 914mmx30,5m (new) - HP Universal Premium Matte Photo Paper 200g/m² 914mmx30, ...

TECHNICAL DATA: Working range: 1100x500 mm Manual positioning Weight Kg: 130

Pressing length: 3500 mm Pressing height: 2000 mm Total connection KW: 7

molds fo caps 1. for glass jars coffe - Caps for glass jars coffe 72 mm and 65 mm - 1500 Euro 2. Saint Gabin - few moulds 6 cav. - 3.000 Euro

calender for PCV foil

Useful power KW: 2,400 Usual yield Kcal/h: 2,165,480 Combustion system: Methane gas Temperature: 90°C Maximum working pressure bar: 5 Burner Baltur "BGN 300"

Mechanic lathe Fabr. VEB CARL ZEISS JENAFabr. -No: 607/84, built in 1984Center height: 150 mm:Circumference diameter over support: 75 mmTip width: 550 mmSpindle bore: 27 mmThread pitches: 0.35 / 0.5 / 0.75 / 1.0 / 1.5 / 2.0Operating voltage / control voltage: 380 V, 220 V, 50 HzRated current of the fuse: 25 AExternal dimensions L x W x H: 1250 x 900 x 1350 mm:With- Underframe- Thread cutting device guide cartridge- large rear shelf made of wood 460 x 990 mm- without tailstockused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Chiller , Carrier 30HXC200, water-cooled , Y.O.M. 2008/2009, very good condition, approx. 700KW/ 200ton cooling capacity

Hydraulic drawing press make CAME Panasonic Matsushita type THB 120 x 100Model no 1882 year of construction 1996Max. Press force: 125 tRetraction force: 20 tCompressive force of the die cushion: 70 tRetraction force of the die cushion: 37 tOil pressure of the press: 210 barOil pressure of the die cushion: 140 barTable size: 1300 x 1000 mmPassage: 1600 x 1200 mmInstallation height: 1300 mmRam stroke: 900 mmOil filling: 1300 lRapid traverse from max.: 300 mm / sCylinder diameter: 224 mm + 2 x 112/80Cylinder Tissue Diameter: 310/180/310/250 mmWeight of the upper tool max.:2300 kgDrive power: 45 kWDrive Power Cushion: 22 kWDimensions L x W x H approx .: 4,000 x 3350 x 5400 mmWeight approx. 31 tWith- heated intermediate plate- Holding device- Photocell manufacturer SICK- Two-hand operation- UVV regulations according to 89/392 EEC- CE clampprevious use:Deep drawing of slit masks for the pictur ...

Battenfeld Calzoni Hydromotor MRE5400/5401/33800 A1640538

Icecream Homogenizer YOM 1996 Only used for 1 year 160l/h, 180 bar Very good condition

LONG BLOCK DIESEL ENGINE CAT C7C/D recondioned in exchange Lisperm:engine block,crankshaft,camshaft,conrod+piston,oil pump,oil tub,front+rear closed Cylinder head mounted,valve lid closed

Hole drill machine for wood Fabr. CASATI MACCHINE Type HF / SuperVertical boring head / boring bar with: 13 drillsDrilling direction: from aboveDrilling depth: 60 mmVertical stroke: 150 mmDrilling beam pivotable forwards by: 90 °Perimeter spacing center-center hole: 32 mmMotor Power Drilling Motor Vertical: 2 HPHorizontal drill head with: 3 drillsHorizontal stroke: 130 mmDrilling direction: from back to front, fixedHole pitch: 32 mmWorktable size: 2000 x 450 mmDrill table adjustment in y-direction: 70 mmMotor Power Drilling Motor Horizontal: 0.25 kWCompressed air: 6-8 barExternal dimensions: 2150 x 1380 x 1780 mmWeight approx: 160 kgWith:- pneumatic material tension (clamping stroke 26 mm)used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be ...

Cast iron beds Useful surface (L x W x H): 3600 x 1200 x 300 mm 4 T-slots: width 44 x 26 mm Equipped with Levelling feet Weight: approx 3 T

Carrier screw compressor with receiver Motor: 93KW/2900rpm Displacement:504m3/hr R134A 400/3/50hz Ready for operation

Carestream (Kodak) Storage Film System Elite as Spare Parts Dispenser First processing station consisting of computer/monitor/keyboard/mouse and software 2. Workstation 5 Kodak CR cassettes PQ: 35x43 - 2 pcs./ 35x35 - 1 pcs./ 24x30 - 1 pcs./ 18x24 - 1 pcs. Barcode scanner UPS Emergency Power • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technici ...

Measuring and control ring for control of three-point internal micrometers Diameter 50mm Diameter 100mm Diameter 150mm Diameter 200mm More available

Package from one place in germany: large format UV flatbed printer Manufacturer: Liyu Model: WER KC 3020 Year: 2018 with one plotting capacity of 30,000 m² UV printer without printheads year: 2018 Ink: UV LED Drying: UV LED Flat bed size: 3050mm x 2050mm Maximum print height: 100mm Print resolution: 2880 dpi RIP software: selectable Hardware: Internal PC/ LCD monitor/ keyboard Dimensions: 3000mm x 5300mm x 1530mm Total mass: 1550 kg Price: on request UV Printing Machine Manufacturer: Liyu Model: UV LED PZ 3210KB-UV approx. 1000000 m² Price: on request 4x UV Printing Machine Manufacturer: Liyu Model: Solvent PZR3208 Year: 2018 with about 1000000 m² PCT Solvent 3208 roll printer Print heads: 8x KM 1024i Print width: 320 cm Print resolution: 1440 dpi RIP Software: Photo Print 11 Price: on request WALLPAPER CUTTER FOTOBA XLD 170 WP Car. XY ro ...

Battenfeld Calzoni Hydromotor MR 4500 L Battenfeld Art.Nr. 21640528

MACHINE IS IN GOOD WORKING CONDITION Machine need center horse and support for the clamp cutting tools. Bj0ie7dcoa Machine Has ben used in Switzerland, after thay realize they need that both suports, they took it off and use on other lathe.

Oil pump, part no. 0R2770

outdated cylinder head

TECHNICAL DATA: Length of sliding table mm: 1600 Saw blade diameter max mm: 350 Cutting height max mm: 110 Cutting width max mm: 1270 saw blade tilting: 0-45° Scoring aggregate: Yes Milling Unit Spindle motion mm: 220 Rotation speed max rpm: 8.000 Motor power KW: 11,5 Weight Kg: 1150

Pumps Cardinal Health Alaris CC/GH Cardinal Health Alaris GW Bbraun Perfusor FM Bbraun Perfusor Compact Bbraun Perfusor Space Bbraun infusomat Space P Fresenius Pilot A2/C Fresenius Orchestra DPS+A+bases Fresenius Optima ST Fresenius Orchestra MVP PT/ST Fresenius Volumat/Injectomat Agila Fresenius Injectomat MC Agila

Radial piston motor, hydraulic motor, oil engine, hydromotor CALZONI / SPERRY VICKERS / IAM Bery7zxqmc dimter DKV III, dimter DKV 3 dimter DKV V, dimter DKV 5

properties: Used telescopic belt conveyor Condition: fully functional with traces of usage Ideal for fast material transport Expertly dismantled and packaged Colour: Red Incl. control cabinet Price per piece Technical Data: Manufacturer: Caljan Total length retracted: 5,050mm Total length extended: 11.550mm Total width incl. control cabinet: 1.340mm Total width without control cabinet: 1.130mm Belt width: 820mm Belt type: Smooth Weight: 3.500Kg telescopic belt conveyor The telescopic belt conveyor is ideal in the picking zone for interlocking machines or workstations and to optimize the internal flow. During transport, the telescopic belt conveyor can transport sensitive and different sized containers, boxes or other packaging and article units to the feed or drop-off point and also serves, for example, as a connecting line in front of or between produc ...

TO WHOM IT MAY CONCERN ; WE VE NEW UNUSED ORIGINAL. CATERPILLAR MODEL 3406 PUMP -GP- FUEL INJECTION AT OUR STOCK. ITEM NUMBER 4P-1381 SERIAL NO 15770853 IT IS ORIGINAL AND NEW READY TO TRANSPORT IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

Manufacturer: Cannon Model: C 6000 Year: 2009 Price: on request

Technical data: - Load capacity 7 t - 3 variable lifting chains on the ring above the traverse 2000 mm - 3 stop chains with hoe load capacity each 5000 kg - 2 x chain length with hoes approx. 800 mm - 1 x chain length with hoe and clamping shot approx. 2500 mm - 2 x arm length 750 mm - 1 x arm length 850 mm - Traverse dimension approx. L 1500 x W 1300 mm - Weight with chains approx. 200 Kg

Technical data: - Load capacity 10000 Kg - 3 variable lifting chains on the ring above the traverse 2000 mm - 3 stop chains with hoe load capacity each 5000 kg - 2 x chain length with hoes approx. 800 mm - 1 x chain length with hoe and clamping shot approx. 2500 mm - 1 x arm length approx. 700 mm - 1 x arm length approx. 800 mm - 1 x arm length approx. 1100 mm - Traverse dimension approx. L 1600 x W 1400 mm - Weight with chains approx. 200 Kg

Technical data: - Load capacity E. chain hoist 250 kg - Lifting speed approx. m/min - Operation of the chain hoist via hand remote scanner - Man. Process hoist / transverse path + longitudinal path - Track gauge variable to approx. 3000 mm - Hook height approx. 2200 mm - Crane track length approx. 4000 mm - Height approx. 3500 mm - UK crane carrier approx. 2700 mm - UK - longitudinal rail approx. 3000 mm - 4 pieces of steel supports made of recheck tube 150 x 100 mm H 3500 mm - 2 longitudinal suspension carriers approx. 4250 mm - Cross suspension carriers approx. 3000 mm - Weight of the plant approx. 1000 kg

Grinding machine for curved parts Molded part grinding machine Make Calmbach & Söhne Double-sided grinding of shaped parts Oscillating rubberized grinding rollers Workpiece thickness maximum 120 mm Workpiece width maximum 130 mm Engine strength 2 motors 1.5 kW each Oscillation electromotor 4 speeds Suction connection diameter 120 mm Includes 20 grinding belts grit 60 + 120 Dimensions 1200 mm x 1500 mm x H 1550 mm

2005 Model 1765 kw 1800 rpm REINTJES Gear Box 7455/1 1 of them clockwise 1 of them counter clockwise Working hours one of them 3850 and 3960. caglar@dortelgemi

The pneumatic depositor Mod P25/A is a machine designed and built to carry out the dosage of liquid and partially-dense doughs in pastry applications. depositing quantity: 30-300 ml; hopper - ca. 30 l; nozzle - Ø 22 mm.

pressure:650 t passage width:920 mm stroke:1750 mm weight of the machine ca.:ca. 47 t Table area:2000 x 1500 mm ram surface:2000 x 1500 mm Daylight Opening:2100 mm Hydraulic:203 bar closing speed:500 mm/min pressing speed:0,5 - 10,4 mm/sec opening speed:250 mm/sec Solve speed:0,5 - 66,4 mm/sec Return Capacity:150 t total power requirement:75 kW Measurements (approx.):4,4 x 2,5 x 7,5 m