ca used for sale

- Special: with carton box passage - Very few operating hours - Condition technically and optically practically as good as new Dimensions: - Length: 3300 mm - Width: 900 mm - Height: 1800 mm

Strapping machine, packaging machine, strapping machine, cardboard stapler, stapler, plier stapler -Pneumatic stapling pliers -adjustable depths: 5 -Dimensions: 210/100/H400 mm -Weight: 2.4 kg

Linear bearing, linear rail, linear guide, roller guide rail, without guide carriage, guide rail -Guide rail with: 2 pieces of slide -Length: 1600 mm -Dimensions: in the pictures -Price: per piece -Number: 2 pieces -Dimensions: 1600/100/H48 mm -Weight: 13.2 kg

Slab Caster Main Data • Manufacturer: Concast-Sumitomo • Number of Strands: 1 • Machine Radius: 8m • Number of Segments: 7 • Mould Size: 760 -1060mm (not adjustable when casting) • Slab Thickness: 160mm • Oscillator: Mechanical • Straightening: Multipoint • Cooling: Single Zone • Casting Speed: 1.7 m/min • Capacity: 650 kt/y • Tundish Weighing: Yes • Tundish Equipment: Stopper Rod, Submerged Entry Nozzle • Dummy Bar: Bottom Entry, Linkage Design • Slab Discharge: Propane Gas Torch Cutting • Breakout Detection: Yes. • Commissioned in 1992. • It has been mothballed since 2013.

In the case of spark-affected smoke and vapours, there is a risk of fire development in the filter material of the extraction system. For this reason, we recommend the use of the BOFA Spark Arresort 2 in such an application. This extinguishes the sparks to the required extent and switches off the extraction system at staker temperature development. Height/with signal tower: 665/870 mm Depth: 530 mm Width: 420 mm Capacity: 850m3/h (500 cfm) Weight: 40 kg (88lbs) Power supply: 115 - 230 V VAT is shown Delivery EXW

Format range: 1150 mm, min. 86 mm Equipment: Longitudinal seam, folding floor, double edge, electronic upper glue unit with 2 application heads, Disc upper glue unit, disc glue unit on the left, Pre-crusher right and left, kicker, counter, medium transport in folding, clocked press belt. Overhaul 2022: cleaned, tested, painted and equipped with new Feeder and transport belts equipped.

Chuck flange, flange mount, lathe chuck flange, drive flange -Muck flange for: three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: 270 -Cone: Ø 139.7 mm -Camlock recording -Weight: 13 kg

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -stable tool cabinet -2x shelves: extendable -Dimensions: 500/600/H830 mm -Weight: 36 kg

Heavy-duty casters, heavy-duty wheel, tires -Roll size: Ø 200 x 50 mm -Inner diameter: 20 mm x 64 mm -Price: per piece -Quantity: 2 wheels available -Weight: 4.5 kg/piece

Motor centering flange, motor flange, pump flange, motor centering bell, coupling bell, pump support for large pumps, hydraulic pump, oil pump, gear pump -small recess: Ø 47 mm -large recess: Ø 50 mm -Quantity: 2 available -Price: per piece -Dimensions: Ø 81/H40 mm -Weight: 0.1 kg

REF-2261 AUTOMATIC CAN SEAMER SOMME NORA-313-VAC WITH VACUUM FILLING MACHINE 6 VALVES Automatic tin can seaming machine with 6-valve filling system Manufacturer: SOMME Model: NORA-313-VAC Can size: 3kg Output: 3,000 cans/ hour Vacuum pump dimensions: width 1,000mm, length 1,300mm, height 1,800mm Overall dimensions: width (including infeed belt) 3,600mm, length 1,900mm, height 2,000mm

Motor centering flange, motor flange, pump flange, motor centering bell, coupling bell, pump support for large pumps, hydraulic pump, oil pump, gear pump -small recess: Ø 75 mm -large recess: Ø 115 mm -Quantity: 1 available -Price: per piece -Dimensions: Ø 180/H71 mm -Weight: 0.6 kg

Surveillance camera, video surveillance -comes from a warehouse liquidation: and are unused -Number: 2x cameras in weatherproof housing (300 mm) with heating/thermostat, 230 V. -Price: per piece -Dimensions: 395/130/H130 mm -Weight: 3 kg/piece

Cloth Puller Oven Schiesser Pull-off Cup NEW 160/180cm Stove Depth -Aluminium cloth pull-off board furnace slider NEW -with undercoat -for 160 / 180cm depth -Pullers are 194cm long -with stainless steel trolley on 4 swivel castors -External dimensions of the carriage: 206x61cm and 182cm high

Control panel Pacmation made of Uhlmann C130 YOC 1996

Fire extinguisher cabinet for fire extinguishers, powder extinguisher -Fire extinguisher cabinet -Number: 3x cabinets available -Price: per piece -Dimensions: 340/220/H750 mm -Weight: 8.8 kg

Fire extinguisher cabinet for fire extinguishers, powder extinguisher -Fire extinguisher cabinet -Number: 2x cabinets available -Price: per piece -Dimensions: 350/250/H930 mm -Weight: 11.3 kg

grass catcher, collection container, mower deck, lawnmower, cutter bar, disc mower -without a fan -for side ejection -Dimensions: 1500/800/H1400 mm -Weight: 100 kg

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Drawers: 2 -Storage: 1 -Brackets for: SK40/SK50 milling holders -Dimensions: 660/1030/H1200 mm -Weight: 190 kg

I sell a body press for furniture element mount RAMARCH PN31. Year of construction 2002. Material size 2500 x 1300 x 600mm Electropneumatic operation. Manufacturer: RAMARCH, Spain. (But already DYNMA) Very good condition. Available the same.

SAVOYE INTELIS packaging machine was built in 2016 in France. The machine is used for example in halls or warehouses, for the fully automatic packing of carton shipping boxes made of corrugated cardboard. All of the devices included in the packaging line are independent and built on the plug and play” concept, which allows easy relocation and installation. The SAVOYE INTELIS packaging line consists of the following devices: – case erecting machine: INTELIS F12 – shrink tunnel: INTELIS T18 – box lid placing machine: INTELIS C12 – glue dispenser: NORDSON PROBLUE The packaging machine is equipped with intelligent conveyors which adjust to the load of the packages and the intensity of work, making the whole packing process smoother. The motors built directly into the rollers operate 100% electrically and thanks to their design and technology used, they save a considerable ...

Stock# UG6345 Unused atmospheric cabinet dryer by Airflow Premier Industrial Oven (UK). Chamber construction mild steel. Inside dimensions of drying chamber: W 3250 mm x D 1850 mm x H 2050 mm. Working temperature range up to 60C. Dryer is equipped with 2.2 kW centrifugal fan, whch can give air circullation up to 4.2 air change per minute. Heating - electric - 15 x el heaters each with power 3 kW. Outside dimensions: W 3500 mm x H 2900 mm x D 2200 mm. Machine has local control panel.

Carton sealer, packing machine -Carton width: max. 530 mm -Dimensions: 1250/760/H850 mm -Weight: 33 kg

Heavy-duty casters, heavy-duty wheels, tires, solid rubber tires -without: rubber coating -Load capacity: kg -Tire size: 350 x 155 mm -Mounting bore: 60 mm 2x with groove -Number: 4x wheels available -Price: per piece -Weight: 31 kg/piece

I sell a body press for furniture element mount RAMARCH PN31. Year of construction 1998. Material size 2500 x 1300 x 600mm Electropneumatic operation. Manufacturer: RAMARCH, Spain. (But already DYNMA) Very good condition. Available the same.

Wärtsilä Lipstronic thruster control system overhauled. W006927795 Lipstronic 793.083.001.0001 Printcard Thruster Control System

Tool holder for TR 20 mounts -made from: Polypropylene copolymer -Impact and scratch resistant, heat resistant -resistant to: mineral oil and various chemicals -Price/Sale: complete -Weight: 1 kg

Tool carrier for SK 30 holders -made of: polypropylene copolymer -Impact and scratch resistant, insensitive to heat -resistant to: mineral oil and various chemicals -Price: complete

ZHF filtration system, Fabr. Filtrox, type: FOM 106 / 39, diatomaceous earth filter with horizontal sieves, for 100 - 120 hl/h, with Diatomaceous earth dosing unit, 1st commissioning in 1973, already removed and stored.

Card holder for Eurocard, screw terminal -Connection type: 4 mm² solid wire -Mounting type: snap-on to mounting rail (EN 60715) or screw-on -Quantity: 6 available -Price: per piece -Dimensions: 137/60/H160 mm -Weight: 0.24 kg

PLC control, carrier module, universal empty housing -Manufacturer: SIEMENS -Type: Simodrive 6SN1162-1AA00-0AA0 -Width: 50 mm -Number: 2x available -Price: per piece -Dimensions: 480/50/H290 mm -Weight: 3.4 kg

REF-2263 SOMME 323 CAN SEAMER WITH 5 HEADS AND VACUUM FILLING SYSTEM 20 VALVES Automatic tin can seaming machine with 5 seaming heads. Fitted with a 20-valve vacuum filling unit. Manufacturer: SOMME Model: 323 Can size: Ø 73mm (easy-open lids) Overall dimensions: length 3,400mm, width 2,800mm, height 2,200mm

Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 0 to 40 mm -Load capacity: 3500 kg -Number: 1x terminal available -Weight: 30 kg

Heavy-duty casters, heavy-duty wheels, tires, solid rubber tires -Load capacity: kg -Tire size: 400 x 145 mm -Holding bore: 60 mm -Number: 3x wheels available -Price: per piece -Weight: 60 kg/piece

Electronics cables, extension cables, electronics cables -Manufacturer: Helukabel -Type: TRONIC-CY 4X0.25 QMM -Length: 1030 m -Number: 4x wires á 0.25 mm² -Price: complete -Dimensions: 495/495/H320 mm -Weight: 40 kg

Paint casting machine, paint casting station -Paint casting machine Manufacturer: Bürkle -Max. pouring width: 1290 mm -Adjustable pouring gap: via handwheel with indicator -hydraulically: height adjustable -without: paint pump -Dimensions: 2100/800/H1450 mm -Weight: 386 kg

Geldmeier packaging system Specifications: • Infeed belt length (mm): 10,000 • Treadmill width (mm): 400 • Carton folding station • Adhesive station • Strapping station • Destacking • Carton length (mm): 950 - 2050 • Carton width (mm): 450 - 690 • Carton height (mm): 60 - 170

Geldmeier packaging system Specifications: • Infeed belt length (mm): 10,000 • Treadmill width (mm): 400 • Carton folding station • Adhesive station • Strapping station • Destacking • Carton length (mm): 500 -1250 • Carton width (mm): 350 - 650 • Carton height (mm): 50 - 170

Persian carpet from IRAN Bakhtiar Province Size 438 x 634 cm Age: approx. 80 - 100 years Slight traces of use Valuation report in the present case

end mill, end mill, milling cutter -Condition: Like new -Diameter: 50 mm -Working height: 100 mm -carbide-tipped -Recording: SK50

30 pcs. work cabinets - wooden work cabinets Size: 2500 mm x 800 mm With 8 drawers and storage board

Stainless steel Dimensions: 730 / 680 / 700 mm.; Weight: 40 kg.; Bottom thickness: 5 mm.; Side thickness: 2 mm.; 4 wheels with a diameter of 150 mm.; Conform to DIN 9797;

Stainless steel Intended for transporting cassettes with dimensions of 600x400 mm Six polyamide wheels, offset in height for control Carrying capacity: 400 kg Dimensions 65 × 42 × 16 cm

PLC control -Manufacturer: SIEMENS -Type: 6FX1115-0AA02 -Number: 1x modules available -Price: per piece -Dimensions: 280/210/H50 mm -Weight: 0.5 kg

Collectors' Item! Vertical Reproduction Camera 220V / 2550W / 50-60cycles (Hz) Dims L130 x W120 x H170 cm - 285 kg

Motor cable reel Manufacturer : Wampfler Type : EB040625-W100.3/40/10-90-HMK8/KN90L4 Free sag, drum on the mobile device Speed 30m/min. m. 50 mtr. Cable 4x16 mm² Condition : New, may have slight scratches/marks, comes from stock. Scope of delivery/information : see the pictures. Internal No.: Werkst. EG R2 P16 Werkst. EG R2 P18 Werkst. EG R1 P06

PLC control -Manufacturer: SIEMENS -Type: 6FX1190-1AG00 -Number: 1x modules available -Price: per piece -Dimensions: 340/260/H65 mm -Weight: 0.6 kg

PLC control -Manufacturer: SIEMENS -Type: 6FX1111-0AM02 -Number: 1x modules available -Price: per piece -Dimensions: 340/260/H65 mm -Weight: 0.6 kg

KG dosing unit, Fabr. Schenk, Type: DA100, in stainless steel, with agitator with engine Bauer on top, standing on mobile feet

For Sale Commercial Operation trade with cars, trucks, agriculture and building machines in Bosnia-Herzegovina -outside EU- - all other business possible - The company in Bosnia Herzegovina is an independent Doo, established in 1999. The main business is trade with all kind of new and second hand agricultural and building machines as wheelloaders and diggers , spare parts, cars and workshop for service. The statute of the Doo allows much more business and can be changed for all kind of other business. In that area all kind of business is possible and allowed, also production, distribution, and so on - as it is industrial area. Part of this DOO is a real estate with 3000 qm paved area, with strong fence all around. Building is new built in 2005 with German Standard - massive,fully damped against cool and warm, central heating. Ground floor there are 2 offices with tea-kitchen, W ...