ca used for sale

pressure: . t square measurement: 55 mm diameter: 63 mm flat material: 170x20 mm total power requirement: kW weight of the machine ca.: t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t passage width: . mm stroke: . mm tracking travel: 45 mm safety distance: 208 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Follow-up time 149 sec The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 100 mm travel -x axis: 2000 mm travel -y axis: 1200 mm travel -z axis: 1000 mm spindle stroke - max.: 500 mm table surface area: 1250 x 1250 mm table rotating: 360 ° max. table load: 8000 kg spindle taper ISO: 50 spindle turning speed range: 30 - 1300 U/min feeds: 2 - 1000 mm/min rapid traverse: 6 m/min drive capacity - spindle motor: 14 kW coolant: voltage: 380 V control: Bosch1-OSA One direction thrust bearing: total power requirement: 15,0 kW weight of the machine ca.: t dimensions of the machine ca.: 4,20 x 3,00 x 3,00 m - Factory No.: 0149 Refurbished 2000 Machine can be used conventionally The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacit ...

spindle diameter: 100 mm x-travel: 2000 mm y-travel: 1200 mm z-travel: 1000 mm w-axis: 500 mm control: Heidenhain type: TNC 155 turning speeds: 20-2000 U/min spindle taper ISO: 50 table surface area: 1100x1300 mm angular milling head: Feed: 0-5000 mm/min Rapid movement: 8000 mm/min workpiece weight: 3000 kg spindle motor: 15 kW total power requirement: 27 kW weight of the machine ca.: 14 t dimensions of the machine ca.: 5,3x2,9x3,1 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers ...

Number of working hours: . h output: 80 PS power fuel: Diesel Weight: 2800 kg The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

15 electric motors from various manufacturers are offered. 1) 2 × SEW-Eurodrive R73 DT90L-4, power: 1.5kW. 2) Eurodrive AB R60 DT80K4/2B, power: 0.4/0.63kW. 3) Elektrim SF90S4, power: 1.1kW, weight: 125kg. 4) AEG. 5) Carl Bockwoldt CD2-71N/4D, power: 0.37kW. 6) K. W. Müller RD0KL 44U/max110KP, power: 0.09kW. 7) EMC Eldro ED30/5. 8) ZET DR 1.5/4-90L, power: 1.5kW. 9) Eberhard Bauer D143/146K. 10) Groschopp DM80-60, power: 4kW. 11) Flender Himmel SP0-G63/L, power: 0.18kW. 12) BBC QU X160 M2 BG, power: 15kW. 13) ATB Antriebstechnik A160L/4E-21, power: 15kW. 14) Georgii-Kobold KLB424V, power: 0.10kW. Inspection is possible by prior arrangement.

Code: 0193 Brand: CASATI MACCHINE Model: BIG 3200 - CE Standard Hydraulic two knives veneer pack guillotine shear - CE Standard Description: Sturdy steel made structure, cast iron knife beam. Self-lubrificating prismatic slide-ways The machine allows, with a single operation, to cut the veneer pack on both sides to be trimmed - The simultaneous trimming on two sides of the veneer pack is carried out thanks to the movement at the same time, of two knives, one fitted on a fixed structure and the other one on a moving part - The machine is equipped with an adjustable rear shoulder, as well as with a pressor to clamp the veneer pack during cutting operations. Possibility of working as a single guillotine shear Useful cutting length (as double guillotine shear) mm 3200 Useful cutting length (as single guillotine shear) mm 3550 Pressore stroke mm 100 Pressor width mm 550 Min  ...

Lifting device for 200-litre containers Manufacturer: Carnitech Type L 125 Dimensions 1300 x 1500 x 4050 mm Power 3 x 400 V, 50 Hz, 0.75 kW With slide for liquid products

sliding carriage length: 3200 mm; cutting width with rip fence: 1200 mm; cutting width at the cross cut: 3450 mm; Schnittiefe: scoring unit: yes; height adjustment: manual / crank; tilt adjustment: manual / crank; rip fence adjustment: manual; display saw blade tilt: digital; display saw blade height: -; display rip fence: scala; display at the cross cut: Scala; saw blade diameter: speeds: 3200 / 4200 / 5000 U/min; motor power: 5 kW; motor brake: yes - automatically; suction connection: 80 mm and120 mm; machine length: 3350mm; machine width: 1800 mm; weight:

planing width: 520 mm; planing shaft type: tersa; number of blades: 4; sourface table length: 3000 mm; table adjustment: electrically; read out table height: digital; sourface fence adjustable: yes; motor power: 7 kW; suction connection: 120 mm; machine length: 3005 mm; machine width: 1460 mm; weight: 870 kg; - Dressing tables made of gray cast iron - The dressing table adjustment takes place via a precise parallelogram system, so that the distance between the table tips and - - the knife shaft remains the same in every adjustment position - Large precision aluminium dressing fence, slightly tiltable 90 - 45 ° - The inclination of the stop is easily readable from the operator side - As standard with auxiliary stop for safe planing of even narrow workpieces - Large four-knife shaft, precision-mounted - Quiet running with precision aggregate and heavy cast iron execution -  ...

working width: 510 mm; cutter head: Streifenmesser; number of blades: 4; surface table length: 2000 mm; fence tilting: ja; surface table fold up: manuell; maxilum thickness planing height: 230 mm; height adjustment thickness table: electric; read out table height: digital; feed speed: 7 / 14m/min; infeed roller: Stahl; outfeed roller: stahl; pressure beam: durchgehend; table roller: ja; motor power: 5,5 kW; motor brake: ja; suction connection: 160mm; machine legth: 2200 mm; machine width: 950 mm; weight: 800;

working width: 1100 mm; min. workpiece height: 4 mm; max. workpiece height: 170 mm; height adjustment: electrically; workpiece thickness display: digital; aggregates: 2; 1. aggregat: angular grooved steel roller Ø 120 mm, fine adjustment for calibration, pneumatic on/off of the roller; 2. Aggregat: Combination unit with finely adjustable working height for calibrating and fine grinding: rubber-coated roller Ø 120 mm (45 Sh), hard grinding shoe with graphite coating on replaceable insert and pneumatic on/off of roller; Link grinding shoe: elastic, sector distance 56; Electronic control: FOX 500 KTR; dust brush: no; motor power: 15 kW; suction connection: 2 x 140 mm; machine length: 1650 mm; machine width: 1820 mm; machine height: 1960 mm; weight: 1170 kg; The LIBRA 35 calibration and fine grinding machine is an extremely versatile machine that can be used in differ ...

working width: 950 mm; min. workpiece height: 4 mm; max. workpiece height: 170 mm; height adjustment: electrically; read out height: digital; electronic control: Fox 500 KTR; aggregates: 1; 1. aggregat: Combination unit for calibrating and sanding / Slant-grooved steel roller Ø 120 mm with height fine adjustment / Hard sanding pad with graphite pad; dust brush: no; motor power: 7,5 kW; suction connection: 140 mm; machine length: 1388 mm; machine width: 1545 mm; machine height: 1668 mm; weight: 660 kg; - Also for smaller craft shops for occasional use - Combination sanding unit with sanding shoe for fine sanding - Standard with diagonally grooved steel roller Ø 120 mm for calibration - Fine adjustment of the working height - Clear control panel on the front - Robust tube-stiffened monobloc steel machine body, robot welded, high-mounted working units for maximum rigid ...

Used spiral rather with 5 extendable tank cars SAN CASSIANO, type: 2003 -In good condition- - for 250 kg (at 65% water content) - With 5 extendable tank cars - Control on the machine on the left - El. Connection: 400 V, 50 Hz, 30 A - Net weight: 1,355 kg - Condition: Good, regular maintenance - Ready for immediate use Visits and test runs are possible by arrangement.

NEGRI BOSSI V 160 - 610 CANBIO ?Année : 2001 Force de fermeture : 160T Volume injectable : 360 cm3? Capacité d’injection : 330 gr de PS? Diamètre de vis : 45 mm? Pression d’injection : 1700 bars ?Épaisseur moule mini/max  : 170 - 550 mm ?Course d’ouverture : 460 mm? Entre colonnes H-V :  510 × 450 mm Dimensions des plateaux : 780 x 730 mm? Commande : DIMI EL 2 Interface colorateur? Noyaux hydrauliques : 1? Noyau air : 1 Dimensions. : 5,72 x 1,47 x 2,15 m Poids : 6150 kg

USED TETRA PAK CAP APPLICATOR 30 FLEX FOR HELICAP 23 FOR SALE YEAR 2014 Item #: Usm-244 Category Cap Applicator USED TETRA PAK CAP APPLICATOR 30 FLEX FOR HELICAP 23 FOR SALE YEAR 2014 Tetra Pak Cap Applicator, Cap Flex 30 For helicap 23, Year of manufacturing 2014, version 300v with cap feeder Condition: Excellent

USED TETRA PAK REX TR27 ASEPTIC FILLING AND CAPPING COMPLETE LINE FOR SALE YEAR 2016 Item #: Usm-245 Category Tetra Pak Rex USED TETRA REX TR/27 Complete Filling and Capping Line For Sale 500ml and 1000ml: 1-USED TETRA PAK ASEPTIC REX TR/27 Complete Filling and Capping Line For Sale YEAR OF MANUFACTURING 2016, Filling Size: 500ml and 1000ml PACK SHAPE ; GABLE TOP or Tetra Rex SPEED: 7000 PACKS PER HOUR ASEPTIC FILLING FOR LONG LIFE PRODUCTS 2-Tetra Pak Tray Machine, Cardboard Packer 32 by Tetra Pak, Wrap Around, Formats: 23, 43, YEAR OF MANUFACTURING 2016 3-Conveyors: Type: Conveyor Control System and Easy Ride and Long Conveyors Condition: Excellent and Tetra Pak Maintained

REFURBISHED TETRA PAK CAP FLEX 30 THE CAP APPLICATOR FOR HELICAP 23 YEAR 2014 Item #: Usm-258 Category Cap Applicator Refurbished Cap Flex 30 For helicap 23 Year of Manufacturing 2014

Caterpillar diesel power plant consisting of 8 generating sets rated at 2,000 kVA each, in excellent operating condition. Technical Specifications Quantity: 8 Generator Sets Rated Output: 2,000 kVA each Engine Model: Caterpillar 3516A Alternator: SR4 Cooling System: Skid-mounted radiators Operating Hours: Approximately 9,000 hours per unit Control Panels: Included Dry-Type Transformer: Included Exhaust System: Included

Key data: 3200 , 1035 , 70

NEGRI BOSSI 320 T type V320-2000CANBIO? Année : 2000 Force de fermeture : 320 T Diamètre vis : 70 mm Rapport L/D : 20 Volume d’injection : 1150 cm3? Capacité d’injection : 1035 gr de PS? Pression d’injection : 1700 bars ?Épaisseur moule mini/max  : 250/700 mm Entre colonnes H-V :  630-570 mm Dimensions des plateaux : 970 x 940 mm? Commande : DIMI EL 2 Interface colorateur Noyaux hydrauliques : 1? Noyau air : 1 Dimensions. : 7,55 x 1,80 x 2,24 m Poids : 12 300 kg

Used Used filling monoblock Fill?n Cap: Year: 2018 Condition: As Is Used Filling Monoblock FILL?N CAP Year: 2018 Speed: 4.000 Bph Model: RST. 30-2-2 Direction: American Linear Blower Type of filling: volumetric Number of filling valves: 2 dosages from 20 to 100 g 2 valves for filling from 5 to 20 ml Product tank Capacity: 25L Heater Stirrer Oil Tank Capacity: 5L Capper Number of heads: 2 Type of cap: Screw Plastic Safety protections Code: QT 638 More details: https://bottlingscout.com

Used Used Gai monoblock for can: Year: 2020 Condition: As Is Model: MLE6661-CAN-002 Year: 2020 Speed: 1,500 cph Product: Beer Machine layout: Linear, left-to-right Rinser 6 clamps Fixed nozzles 2 air treatments Isobaric filler 6 valves Valve type: Electropneumatic Valve functions: Gas injection, leveling, degassing Caps distributor 6 positions Gas flushing system Single-head seamer Applicable lid type: 202 ends (? 52 mm) Safety protections Code: QT 757 More details: https://bottlingscout.com

Used Used labeller Krones Canmatic 960-20 PET: Year: 1995 Condition: As Is Used KRONES labelling machine CANMATIC 960-20 Year: 1995 ? Reconditioned in 2015 Suitable for pre-cut wraparound paper label Speed: 30.000 bph System to put glue on the bottle ? NORDSON model PB7 , 2 MOD EP34S System to put glue on the label ? NORDSON model PB7 , 3 MOD SOLIDBLU- S PLC SIEMENS S7 , Inverter Danfoss , HMI touch screen SIEMENS Bottles equipments : 0,5 Lt prestige 0,5 Lt classic 1,0 Lt ? diameter 1,5 Lt ? diameter Code: EA 50 More details: https://bottlingscout.com

NEGRI BOSSI 55 T type V55-200 CANBIO? Force de fermeture : 55 T Diamètre vis : 28 mm Rapport L/D : 20 Volume d’injection : 92 cm3? Capacité d’injection : 84 gr de PS? Pression d’injection : 2100 bars? Épaisseur moule mini/max : 120/350 mm ?Entre colonnes H-V : 315 x 280 mm Dimensions des plateaux : 455 x 430 mm? Commande : DIMI EL 2 Interface colorateur ?Noyaux hydrauliques : 1? Noyau air : 1 Dimensions. : 3,72 x 1,18 x 1,80 m Poids : 2000 kg

Kaeser ECO CAR 650, year: 1997, 10 bar pressure, tank capacity 70 liter, intake capacity 650 liter per minite, 3 phases 380/400 volts

Manufacturer: Scheugenpflug Type of machine: Casting and potting plant line Year of manufacture: Individual components dated 2022 and 2023. Operating history: The system was in operation from approximately August 2022 until the end of 2023 and ran without problems until the line was shut down The line is composed of the following main components. 1. Potting cell with axle system - Type: CNCell - Built in 2022 - Air pressure: 6 bar - Power supply: 400V 3~/N/PE. - Power frequency: 50/60 Hz - Power input: 8.6 kVA - Rated current: 13.8 A - Control voltage: 24 V DC 2. PTS preheating oven - two lanes - Type: FC Curing Oven FC-5Z-57-P-2S-6050-100 - Year of construction: 2022. - Nominal temperature: 100 degrees Celsius - Throughput time can be individually adjusted. 3. Barrel stirring station - Type: Barrel Agitator Station - Built in 2023 - Weight: 800 kg - Air pressure: 6 bar - Power ...

General SKU296Y560 LocationBarneveld MakeLe Carbone-Lorraine Pressure Working pressure shell6 Bar Working pressure tubes8 Bar Main Features Shell (Material)Mild steel Tube (Material)Graphite Surface80 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Horizontalcheck Heating surface± 80 m² Tube capacity340 l. Number of tubes:± 220 Tube diameter± 16 mm Tube length± 7150 mm Max. temperature60 °C Shell diameter670 mm Shell length7742 mm Max. temperature60 °C Shell connectionsø 200 mm Cover connectionsDN 200 MaterialGraphite, Mild steel General Serial17461 TypePOLYBLOC EXCHANGER NCH 61OG Year of construction1996 Floorspace7,75 x 1,05 m Total height1,5 m Weight8000 kgOils & fatPaints & coatingsGeneric medicinesOintmentsFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersFeed addi ...

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm feed: 5-25 m/min Dimensions (L/W/H): 4700/1800/1100 mm weight: ca. 4.000 kg CASOLIN MEGA 230/6 four-side planer ------------------------------------------ 6 spindles, with touchscreen control. Width and height controlled. Spindle arrangement: 1st spindle: bottom, 40 mm diameter, 6,000 rpm, 5.5 kW 2nd spindle: right, 40 mm diameter, 6,000 rpm, 11 kW together with 3rd spindle: left, 40 mm diameter, 6,000 rpm 4th spindle: top, 40 mm diameter, 6,000 rpm, 7.5 kW 5th spindle: bottom, 40 mm diameter, 8,000 rpm, 5.5 kW 6th spindle: top, 40 mm diameter, 8,000 rpm, 5.5 kW Machine without machining tools. The additional screen on the front of the machine is not included in the scope of delivery (is part of the window system). Machine already dismantled and stored. (technical information accor ...

: 1860 m³/h : Pressung 2.900 Pa : 1,1 kW filter surface area: 10 m² : 72 dB(A) : 400/50 V/Hz : 665 x 1100 x 1495 mm : 200 kg - Hose arm 3 m, joints inside - Filter cartridge: dust class M - Pre-filter: baffle plate - Current type: 3Ph+N+PE The filter system --------------------------------------- The mobile filter system of the Cartmaster IFA type is thanks to the automatic Cleaning particularly suitable for welding work with unalloyed and alloyed steels, galvanized material and aluminum with heavy smoke development. It corresponds to the safety requirements for devices Welding fume class W3 (high-alloy steels with alloy components > 30% Nickel-based alloy).If used as intended, the system can be used for the Recirculation mode used because the requirements for the Exceptions according to TRGS 560 are fulfilled. That special developed, dirt-dependent cleaning system ensures a good clean ...

feed pressure: 10,0 bar intake capacity: 727 L/min Effective free air delivery: 582 L/min Receiver capacity: 90,0 Ltr. motor: 400 V power capacity: 4,0 kW weight of the machine ca.: 91,0 kg. dimensions of the machine ca.: 1040 x 450 x 850 mm Description : - mobile craftsman piston compressor - High-quality processed, 2-stage compressor block - with 2 cast iron cylinders and optimum efficiency - Finely ribbed cylinder and cylinder head for optimal temperature dissipation - low compressor speed to reduce the compression temperature and minimizing wear and tear - Very low residual oil content in the compressed air thanks to precision piston rings - Generously dimensioned solid rubber wheels and castors at the front - the start-up relief takes place via a mechanical vent valve - powder-coated compressed air tank in RAL 7035 - Built in accordance with the European Pressure Equipment Directi ...

CARNAGHI PIETRO AFT 16 TM/SH ist ein CNC Dreh-, Fräs- und Schleifzentrum, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazität: Planscheibe Ø1000 mm, Schwingdurchmesser 1650 mm, Drehhöhe 1100 mm; X ±1010, Y 600, Z 1250, C 360°. Werkzeugmagazin 40 Plätze, 2 Paletten, Tischbelastung 3000 kg. Daten: Fräsgeschw. 10–3000 t/min (31 kW, 1000 Nm); Tisch 5–800 t/min (60 kW); Vorschub 0.1–3000 mm/min; Eilgang 10 m/min; 3×400V 50Hz; Gesamtleistung 196 kW; Gewicht ~35000 kg. Zubehör: Kühlmitteleinrichtung, Satz Werkzeughalter, Späneförderer, Palettenwechsler. Für enge Toleranzen; geeignet für Automotive, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

MOORE CATMUR 2C ist eine Koordinatenschleifmaschine für Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazitäten: Tisch 610×280 mm; Wege X450 Y280 Z250 mm; max. Schleif-Ø 127 mm; Ausladung 340 mm. Daten: Drehzahl max. 160000 t/min; Gewicht ~1660 kg; Abm. L1650×B1085×H2000 mm. Erzielt enge Toleranzen; typische Bereiche: Automobil, Uhren, Werkzeugmaschinen, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

PARKER MAXIGAS 108 N CALL ist ein Générateur d'azote, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Betriebsdaten: Abmessungen L 3000 mm × B 1100 mm × H 2400 mm. Technische Daten: genannte Abmessungen; keine weiteren Leistungsdaten angegeben. Zubehör: Kompressor Hydrovane V07ACE10-4035S500 und Drucklufttrockner Parker DME020 DD8. Ermöglicht enge Toleranzen; typische Branchen: Automobil, Luftfahrt, Elektronik und Medizintechnik. Technische Daten ohne Gewähr

Contrôle malrond + Cary Nr. 62 ist ein Messgerät mit hoher Präzision, genauer Messgenauigkeit und zuverlässigem Betrieb. Wesentliche Arbeitskapazitäten: keine Angaben in den vorliegenden Informationen. Haupttechnische Daten: nicht in den bereitgestellten Informationen enthalten. Angaben zu Schlüsselzubehör oder Ausrüstung sind nicht verfügbar. Es ermöglicht das Erreichen enger Toleranzen und eignet sich typischerweise für Bereiche wie Uhrenindustrie, Automobil, Werkzeugmaschinen, Luft- und Raumfahrt und Medizintechnik. Technische Daten ohne Gewähr

CAZENEUVE HB 725 ist eine Mechanikerdrehbank hoher Präzision, ausgelegt für hohe Genauigkeit und Zuverlässigkeit. Leistungsdaten: Spitzenhöhe 315 mm, Spitzenweite 1500 mm; Drehdurchmesser über Planschlitten 670/400 mm, über dem Bett 725 mm, in der Kröpfung 750 mm, Länge Kröpfung 235 mm; Spindelbohrung 81 mm; Pinolenhub 235 mm. Technische Daten: Spindeldrehzahlen 14–1600 t/min; 73 Vorschubstufen; Längsvorschub 0,018–11 mm/t, Quervorschub 0,009–6 mm/t; Spindelmotor 13 kW; Anschluss 3x400 V 50 Hz; Gewicht ~2900 kg; Abmessungen 3140×1270×1355 mm. Zubehör: 2-achsiges Digitalanzeigesystem Heidenhain, 3-Backenfutter, Satz harte und weiche Backen, feste Lünette, Werkzeughalter mit Elementen. Erreicht enge Toleranzen; geeignet für Automobil, Luftfahrt, Feinmechanik, Medizintechnik und Uhrmacherei. Technische Daten ohne Gewähr

Martin 924 Casemaker, Year: 1991, Max. Size: 920 x 2,400 with Skipfeed 1,200 x 2,400 mm, Min. Size: 340 x 750 mm, Max. speed: 15,000 pcs/h, 3 Color Flexo, Rotary Diecutting, Slotter, Packfeed Prefeeder, Folding station, Counter Ejector, Mosca strapping machine Year 2009, Taper Applicator, hhs-Electronic Glue System, Year: 1991, Min. Size: 340 x 750 mm, Max. Speed: 15.000 Stk/h

Bürkle CASC 1300 Filler Machine

Manufacturer: Carl Zeiss Model: OVS 250 Machine type: Automatic glass grinding machine Current type: D Frequency: 50 Hz Operating voltage: 380 V Rated current: 7.6 A Control voltage with/without transformer: 220 V / 24 V Rated fuse current in the supply line, without/with increased delay: 20 A Wiring diagram number: 85 24 31 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Carl Zeiss Model: HKM063 Machine type: cylindrical grinding machine Technical Specifications: - Frequency: 50 Hz - Operating voltage: 380 V - Rated current: approximately 10.1 A - Control voltage with/without transformer: 220 V / 24 V - Rated fuse current in the supply line, without/with increased delay: 16 A Find more here - .ucymachines/ Contact us at - sales@ucymachines

Key data: 1825 KW, 2281 kVA, 13 V

Five (5) Surplus Caterpillar 3516B, 1825 kW Prime, 13,800v. 60 Hz. 3 Phase, 0.8 P.F. Diesel Generator sets. These 2281 kVA Prime, Diesel generator sets for continuous parallel. They were manufactured in 2013 and were never used. They come with a electric starter 24v. prelube pump, Jacket Water Heater, Fuel filter, Air Filter, radiator cooled, Paralleling control system, 2760 frame generator, exhaust system with catalyst, open skids

B&A REF: 9341 TON: 550 SCREW DIAMETER: 90MM SHOT WEIGHT: 2365 STROKE VOLUME: 2600CM3 INJECTION PRESSURE: 1630AR PLATEN SIZES: 1310 X 1260MM DBTB: 900 X 800MM MIN MOULD HEIGHT: 300MM MAX MOULD HEIGHT: 850MM MOULD OPENING STROKE: 900MM MAX DAYLIGHT: 1750MM EJECTOR STROKE: 300MM CONTROLS: COLUMBIA CORE PULLING: 2 AIR VALVES: 2 MOTOR: 55 HEATING CAPACITY: 34KW ROBOT: STYRAMA SERVO SCREW DRIVE: HYDRAULIC

B&A REF: 9340 TON: 130 SCREW DIAMETER: 40MM SHOT WEIGHT: 2015 STROKE VOLUME: 232CM3 INJECTION PRESSURE: 1710AR PLATEN SIZES: 620 X 665MM DBTB: 410 X 460MM MIN MOULD HEIGHT: 150MM MAX MOULD HEIGHT: 500MM MOULD OPENING STROKE: 420MM MAX DAYLIGHT: 920MM EJECTOR STROKE: 150MM CONTROLS: COLUMBIA CORE PULLING: 1 AIR VALVES: 1 MOTOR: 15 HEATING CAPACITY: 9KW ROBOT INTERFACE: EUROMAP 67 ROBOT: WITTMANN BRIMUS 16 SCREW DRIVE: HYDRAULIC

Automatic intermittent-motion stretch-banding machine for grouping and banding folding cartons with linear infeed. Machine incl. grouping unit. Output up to 40 cycles/min.

Caterpillar Model 3516B generator set, 2015 model year. Rated power: 2,281 kVA, 1,825 kW; rated voltage: 13,800 V; rated frequency: 60 Hz; rated RPM: 1,800. Never used; started only for testing purposes.

Key data: 2000 KW, 11000 V

Caterpillar G3516H — 2 MW Gas Generator Sets with CHP We are offering for sale 2 × Caterpillar G3516H packaged gas generator sets equipped with a cogeneration (CHP) system for heat recovery. Main Specifications Manufacturer: Caterpillar Model: G3516H Electrical Power: 2,000 kW / 2 MW each Voltage: 11,000 V Year of Manufacture: 2014 Configuration: Packaged Application: Natural gas power generation / CHP CHP System: Heat recovery / cogeneration Operating Hours: 14,000 h Quantity: 2 units available Condition: Used Both units are available as a matching package and are suitable for industrial power generation projects where electricity and useful heat recovery are required. Upon request, we can provide: Equipment photographs Videos of the units in operation Technical documentation Detailed scope of supply Information and documentation regarding the heat recovery / CH ...

Key data: 1000 KW, 400 V

2 × Caterpillar G3516 – 1 MW Gas Engine Generator Sets We offer two new Caterpillar G3516 gas engine generator sets, available for sale as a package or individually. Both units are new and have never been operated, making them suitable for projects requiring reliable gas-fired power generation with minimal commissioning risk. Technical Specifications Manufacturer: Caterpillar Model: G3516 Quantity: 2 units Electrical Output: 1,000 kW / 1 MW per unit Total Available Capacity: 2 MW Voltage: 400 V Frequency: 50 Hz Year of Manufacture: 2018 Condition: New, never operated The two units can be purchased individually or together, depending on project requirements. Additional Information Upon request, we can provide: • Detailed equipment photographs • Technical documentation • Videos • Full scope of supply • Commercial quotation Please contact  ...

Used GEA Aseptic line 48000 BPH - year 2020 (data of use)Technical Specifications & Performance DataThis used bottling line is a 2020 PET aseptic production line configured for 230 ml PET bottled water at a rated output of 48,000 bph. It combines PET bottle blowing, aseptic processing, filling, capping, labeling, inspection and secondary packaging for high-output beverage production. Production capacity: 48,000 bph Available bottle format: 230 ml PET only Main line year: 2018, 2020 (data of use) Blowing equipment: SIPA SFR24 EVO, 48,000 bph Filling equipment: GEA FILLSTAR FX AS 84 PET filler, 48,000 bph Compressor: AF L5S, 35 bar, 220 kWAdvanced Automation & Control SystemsThe line includes electrical control cabinets with HMI displays, ventilated electrical enclosures and high-voltage warning protection. Process equipment includes a Tetra Pak FLEX1 PET UHT sterilizer rated at 17 t/h, a  ...

16882 hours after major overhaul, KWe: 1600, Working hours: 16882

Workpiece thickness: 8 - 50 mm Edge thickness: Coil edges 0.4 - 3 mm Feed speed 10 m/min Equipment: manual height adjustment. Joint milling unit, 2 motors Panel edge heating Gluing area Pressure zone 1 driven and 2 non-driven rollers End trims, 2 x 0,8 kW motors, straight and chamfer 15? Top and bottom trimming Profile scraping unit for PVC edging Glue scrapers