ca used for sale

Used Used Bottle-Heaters cames IR 10: Year: 2015 Condition: Good Used Bottle-Heaters cames IR 10: Speed: 3.000 bph. Year: 2015. Model: IR 10 Heating system with infrared lamps Safety protections. Code: M 11 More details: https://bottlingscout.com

Used Used labeller Capsuler GAI 6030: Year: 2004 Condition: Good Year: 2004 Speed: 2.500 bph Direction: Clockwise Model: 6030 Nr. 3 adhesive stations Suitable for pvc and polylaminate capsules Formats: 0.75 lt series xv glass special, 0.75 lt Safety protections Code: EA 454 More details: https://bottlingscout.com

Caterpillar Olympian generator set 30 kVA in soundproofed housing - - - - - Engine: - Manufacturer: Perkins (England) - 4 cylinders - Diesel - Water-cooled - - - - - Generator - Manufacturer: Leroy & Somer (France) - Power: 30 kVA - 230 / 400 volts - 50 Hertz - AVR regulator - - - - - Start Unit: - Digital Olympian Start Unit - Engine monitoring: engine temperature, oil pressure, speed - Generator monitoring: volts, amps, hertz - Hour meter - - - - - Sockets: - 1x 230V - 1x 400V 16A - 1x 400V 32A - - - - - Other data: - Dimensions: 166 x 86 cm - Operating hours: 4860 hours - - - - - Condition: - The generator set is in a used condition - A test run was done - The engine starts well and the generator generates 400V and 50 Hz. - - - - - Scope of delivery: - CAT Olympian generator set 30 kVA (with Perkins engine) - In a s ...

Used Used Microfiltration System Cadalpe 2012: Year: 2012 Condition: Good Used Microfiltration System Cadalpe: Model: C41-24 SA Year: 2012 Speed: From 7200 a 19.200 litres/hour 24 Filter modules with polymer membranes a hollow fiber, each with a surface area of 10 m? Code: P 22 More details: https://bottlingscout.com

Key data: 648 KW, 810 kVA

Caterpillar 3412C Generator Sets – 2014, Unused • Quantity: 9 units • Prime Power: 810 kVA / 648 kW • Voltage / Phase: 400/230 V, 3‑phase • Frequency / Speed: 50 Hz, 1500 RPM • Power Factor: 0.8 • Engine: CAT 3412C diesel • Condition: Unused, factory new Key Features: IP22 protection, H insulation, standard CAT excitation, suitable for industrial continuous-duty applications in 50 Hz markets. Caterpillar 3406C Generator Sets – 2014, Unused • Quantity: 5 units • Prime Power: 275 kVA / 220 kW • Voltage / Phase: 400/230 V, 3‑phase • Frequency / Speed: 50 Hz, 1500 RPM • Power Factor: 0.8 • Engine: CAT 3406C diesel • Condition: Unused, factory new Key Features: IP23 enclosure, H insulation, star-connected generator, ambient rating up to 50°C.

Key data: 648 KW, 810 kVA

Caterpillar 3412C Generator Sets – 2014, Unused • Quantity: 9 units • Prime Power: 810 kVA / 648 kW • Voltage / Phase: 400/230 V, 3‑phase • Frequency / Speed: 50 Hz, 1500 RPM • Power Factor: 0.8 • Engine: CAT 3412C diesel • Condition: Unused, factory new Key Features: IP22 protection, H insulation, standard CAT excitation, suitable for industrial continuous-duty applications in 50 Hz markets. Caterpillar 3406C Generator Sets – 2014, Unused • Quantity: 5 units • Prime Power: 275 kVA / 220 kW • Voltage / Phase: 400/230 V, 3‑phase • Frequency / Speed: 50 Hz, 1500 RPM • Power Factor: 0.8 • Engine: CAT 3406C diesel • Condition: Unused, factory new Key Features: IP23 enclosure, H insulation, star-connected generator, ambient rating up to 50°C.

Amazone Cayron 200V 6-furrow plough

1,1 Kw. 400 v. 50 Hz. With suction arm 3 m, hose type, internal joints. 3 units available.

Used Used end Canning Line 2019: Year: 2019 Condition: Good Used end Canning Line 2019: Year: 2019 For cans Speed: 720 packs/hour Type: with tray Case Packer: Number of heads: 1 Pick per head: maximum 3 Head type: magnetic Carton Closer Knecht Model: d-100 Speed: 12 pack/min Operation: automatic (refilling of the carton magazin is manuel) Closure type: hot melt glue If hot melt glue: Robatech Palletizer Ecoma / Kawasaki Model: 200900-25 maximum Packing height: 180 cm Layer pad placing system No pallet wrapper General Information: Layout: o Lunghezza: 4100 mm o Larghezza: 3100 mm o Altezza: 3100 mm Safety protections Code: NP 686 More details: https://bottlingscout.com

Manufacturer: Carint Year of Manufacture: 2000 Machine Type : 6-Colour Central Impression Flexo Printing Machine Print Specifications - Substrates: PE, PP, OPP, PET, Paper - Printing width: 1250 mm - Material width: 1280 mm - Minimum print repeat: 360 mm - Maximum print repeat: 1040 mm - Mechanical speed: up to 300 m/min Unwinder and Winder - Unwinder type: Turret, non-stop - Maximum roll diameter: 800 mm - Shaft size: 3 inch expanding shafts - Winder type: Turret, non-stop - Maximum roll diameter: 800 mm - Shaft size: 3 inch expanding shafts Ink and Drying System - Ink pumps: 6 pneumatic pumps - Doctor blade system: chamber type doctor blades - Drying system: electrical Accessories and Equipment Included - Motorised longitudinal register - Anilox cylinders: 8 pieces - Cliche holder cylinders: 6 pieces - Video inspection system - Web guides - Banana rolls - Cliche holder hoist  ...

Table dimensions: 1100 x 750 mm Motor output: 5 kW Spindle diameter: 30 mm reus: 2900/4400/6000/8000 U/min Weight: 500 kg Year: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 10000 mm swing diameter: 14000 mm turning height: 8000 mm Control: Siemens Sinumerik 840 D workpiece weight max.: 500 t faceplate turning speed range: 0,2 - 35 U/min drive motor: 300 kW ram head dimension: 600 x 600 mm max. ram stroke: 4000 mm milling drive: 100 kW hob turning speeds: 3000 U/min rapid traverse x + z axis: 10 m/min total power requirement: - kW weight of the machine ca.: 350 t Machine has never been used and is still original, seaworthy packed and stored. equipped with: - CNC control Siemens Sinumerik 840 D - Hydrostatic axes - Hydrostatic table - Milling device - Hirth couplings for tool holder Acessories: • VERTICAL HEAD ISO50 BIG PLUS AD 8T5060164 • VERTICAL HEAD ISO50 BIG PLUS AD 6000RPM 8T5060165 • HORIZZONTAL HEAD ISO50 BIG PLUS 8T5060163 • UNIVERSAL HEAD TU-50- ISO50 AD BIG PLUS 8T5060171 • HEAD DANDREA UT-8-800-S 8T5060166 • TOOL HO ...

Used Used Complete Canning Line KHS 25.000 cph: Year: 2017 Condition: Good Used Complete Canning Line KHS 25.000 cph: Capacity: 25.000 cph Products: beer and carbonated soft drinks Format: 500ml; 211/202 Yom: 2012, 2017 Current condition: still installed ? power on the machine. Can be inspected in dry cycle. Available for dismantling: november 2025. The cans will be packed in tray with foil. Composed of: Bulk can depalletizer: linker dpg-500, yom: 2012 Canceck: transtechhysek, yom: 2012 Can conveyor: linker conveyor rc/khs, yom: 2012 Rinser: linker triplex rinser tr/khs, yom: 2012 Flush pasteurizer: khs innopro 140/14/85, yom: 2012 Filler: khs innofill can dvd, yom: 2017 Seamer: ferrum f08, yom: 2012 Lid feeder: nsm lidservera30, yom: 2017 Conveyor: khs innoline btr, yom: 2012 Filling height control: khs innocheck cub, yom: 2012 Blowing: europool Packing machine: khs kisters sp0502, yom: ...

Used Used Heating tunnel dryer Cames: Year: 2008 Condition: Good HEATING TUNNEL DRYER CAMES Model: LR-8+RP-12+TNN-8 Year: 2008 Parallel input and output Speed: 6000 BPH Rain heating with water and steam heat exchanger Serpentine path Drying system with outgoing air knives plus an additional external station Safety protections Code: Y 35 More details: https://bottlingscout.com

A complete painting system on two levels for engine manufacturing including all necessary aggregates and components is available. Workpiece carriers in the system: 118, cycle time: approx. 49s, complete throughput time: 97min, max. production capacity with 3 shifts: 258000/year, overall system dimensions X/Y: approx. 26000mm/9000mm. 1) Adsorption dryer. 2) Steam humidifier Carel. 3) Two- and three-stage filter boxes. 4) Compressor technology. 5) Air dryer Hygrex. 6) Robot with control cabinet and spray gun. 7) Paint dosing pump. 8) Paint preparation and cleaning. 9) Osmosis system. This is a complete painting system using a robot from cleaning to the drying process. Documentation available. An on-site inspection is possible.

Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm feed: 5-25 m/min Dimensions (L/W/H): 4700/1800/1100 mm weight: ca. 4.000 kg CASOLIN MEGA 230/6 four-side planer ------------------------------------------ 6 spindles, with touchscreen control. Width and height controlled. Spindle arrangement: 1st spindle: bottom, 40 mm diameter, 6,000 rpm, 5.5 kW 2nd spindle: right, 40 mm diameter, 6,000 rpm, 11 kW together with 3rd spindle: left, 40 mm diameter, 6,000 rpm 4th spindle: top, 40 mm diameter, 6,000 rpm, 7.5 kW 5th spindle: bottom, 40 mm diameter, 8,000 rpm, 5.5 kW 6th spindle: top, 40 mm diameter, 8,000 rpm, 5.5 kW Machine without machining tools. The additional screen on the front of the machine is not included in the scope of delivery (is part of the window system). Machine already dismantled and stored. (technical information accor ...

24 weighing heads, total capacity: 9 l for weighing funnel, was used to weigh mini salami.

Carsoe Group Anytray Buffer 1500 – Pneumatic Tray Buffer System, Manufacturer: Carsoe, Model: Anytray Buffer 1500 LLANONE Right Pneumatic, Year of manufacture: 2022, Machine type: Tray buffer / product accumulation system, Description, The Carsoe Anytray Buffer 1500 is a pneumatic tray buffering system designed to temporarily accumulate and manage trays within automated food processing and packaging lines. The system helps stabilize product flow and prevents interruptions between processing machines., Built with hygienic stainless steel construction, the unit is suitable for demanding food production environments, especially in seafood and protein processing facilities., Technical Specifications, - Manufacturer: Carsoe, - Model: Anytray Buffer 1500 LLANONE Right Pneumatic, - Year: 2022, - Power: 0.46 kW, - Supply voltage: 230 VAC + N + PE, - Frequency: 50 Hz, - Air pressure: 6 bar, - M ...

Used Used Complete Canning Line 18.000 cph: Year: 2017 Condition: Good USED COMPLETE KRONES BEVERAGE CAN FILLING LINE Year: 2017 Speed: 18.000 cph Sentry Bulk Can Depalletizer and empty can single filer Entech empty Can Rinser ? ionized air rinse Krones 32 valve Can Filler, counter pressure (isobaric fill) Ferrum F05 Five Station Can Seamer (set for 202 can ends) CSW Can End Feeder, Type 1 Krones Checkmat Can Inspection System Filtec Can Inspector, model FT 100 (does not convey) Leibinger Inkjet Can Coder, model JET2neo Domino Ink Coder, Model DPX500 Bevco Full Can Conveyors Carleton Helical Tech Can Flip Blocks, 12oz sleek, 12, 16, 19.2 std Bevco Air Knife Graphic Packaging Cartoner, model Quickflex 300 Bevco Laner, model M2-1 KHS / Kayat Tray Former ? Tray Packer, model TP-50A TGW belt and Roller Case Conveyor Columbia Case Palletizer ? High Level, model FL2000 Highlight Pallet Wrapper ...

Used Used Washer-Dryer Cames WDT 16: Year: 2001 Condition: Good Used Washer-Dryer Cames WDT 16: Year: 2001 Speed: 12.000 bph Model: wdt 16 Direction: clockwise 16 heads ? bottle extern wash Air bottle dryer. Safety protections. Code: M 12 More details: https://bottlingscout.com

Used Used Washer-Dryer Cames WDT-1: Year: 2010 Condition: Good Used Washer-Dryer Cames WDT-1: Brand: Cames Model: WDT-1 Year: 2010 Direction: Clockwise Number of heads: 1 Speed: 1.500 BPH Air blade drying system Safety protections Code: M 70 More details: https://bottlingscout.com

Sandblasting machine Cassani STL A-600/2TR 2 turbines Sandblasting machine Cassani STL A-600/2TR 2 turbines

A vertical mixer for powders and granulates Cavicchi is available. Volume: 180l. The machine has an unspecified, presumably electrical defect. Without mixing bowl. An on-site inspection is possible.

8 Pieces Diesel Container Power Generator Engine Type: Caterpillar 3516 Power: 1825 kVA each Year: 2011 2024/2025 newly built and tested machine sets, no operating hours after that! Cooling: Water with radiator cooler Speed: 1500 1/min Generator: Caterpillar SR5 Voltage: 400/231 V, 50 Hz With EMCP 3.2 controller Subject to prior sale - errors possible! Internal reference number: E-1004-110

2 Head Automated Cask Washer - Second Hand 2 heads cleaning, stainless steel cask washer, with rotating spray balls. Heated detergent tank Air Actuated Valves Single Phase 240 Volts Manufactured by ABUK - 10/07/2004 Serial Number: AB06 For more information and more available stock please visit us at - advancedbrewing.co.uk

Width 52 cm Year of manufacture 1997 Automatic Paper Folding Machine Computer control with monitor Flat pile feeder FSA 52 with suction head 1st station: 4 fold pockets 52 cm Downstream knife shaft Flexible sword folding unit Shed display Delivery date: immediately

Camfil filter unit CS 610 for industrial extraction systems Manufacturer: Camfil KG Model: CS 610 lacquered Type: Filter unit for industrial extraction systems Article number: 518110 Serial Number: 000442739182 Number of units: 2

Multi-spindle drilling machine manufactured in 2019. This COMEC FMOV 1500 6UF + CA2 features a working width of 1500 mm and a working depth of 300 mm, allowing for efficient processing of long workpieces up to 1500 mm in one cycle. It includes an automatic parts loader and pneumatic clamping for enhanced productivity. If you are looking to get high-quality drilling capabilities, consider the COMEC FMOV 1500 6UF + CA2 machine we have for sale. Contact us for further details.

balancing body min/max.: 30 - 5000 kg balancing body diameter with machining unit: 2100 distance of bearings: kleinster 240 mm dia. axle journal: 35 - 180 mm weight of the machine ca.: 400 KG The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1237 KW, 1650 kVA, 10500 V

Introducing the new Caterpillar Gas Generator, Model CG 170-12, manufactured in March 2017. This generator is in new and unused condition, with the following specifications: - Power: 1237 kW - Speed: 1500 RPM - Alternator: Marelli Motori (Made in Italy) - Output: 1650 kVA - Voltage: 10,500 - Frequency: 50 Hz - Serial Number: 2213373 If you have any questions, please get in touch with us. #caterpillar #energy #power #gas #gasgenerator #new

CARER R120 SE Electric Forklift 12 T Triplex Mast Manufacturer: Carer Type: R120 SE Serial Number: 1100325-R00120 Year of Make: 2011 Drive: Electric Nominal load capacity: 12000 kg Maximum lifting height: 5300 mm Curb weight without battery: 16750 kg Battery weight: min. 4450 kg Battery weight: max. 5400 kg Tires: Superelastik twin tires Location: Kirkel

The Engineering Services Northland Ltd. Casein Mincer is an industrial-grade processing machine designed for use in the dairy and broader food industries. It is primarily used to reduce curd or other soft solids to a uniform particle size, facilitating downstream operations such as washing, drying, whey separation, and preparation for cheese or casein production. The machine is constructed entirely from food-grade stainless steel and features robust bearing housings and mechanical seals suitable for continuous industrial operation. Particle size can be accurately controlled through interchangeable and adjustable mincing plates. The unit is fully compatible with CIP (clean-in-place) systems, ensuring efficient and hygienic cleaning. The mincer was previously operated in a casein production facility and offers an estimated processing capacity of approximately 8.000 kg/h of wet casein curd. ...

The Engineering Services Northland Ltd. Casein Mincer is an industrial-grade processing machine designed for use in the dairy and broader food industries. It is primarily used to reduce curd or other soft solids to a uniform particle size, facilitating downstream operations such as washing, drying, whey separation, and preparation for cheese or casein production. The machine is constructed entirely from food-grade stainless steel and features robust bearing housings and mechanical seals suitable for continuous industrial operation. Particle size can be accurately controlled through interchangeable and adjustable mincing plates. The unit is fully compatible with CIP (clean-in-place) systems, ensuring efficient and hygienic cleaning. The mincer was previously operated in a casein production facility and offers an estimated processing capacity of approximately 8.000 kg/h of wet casein curd. ...

Replacement control system for storage lifts and paternoster systems. With our "LTG StoreControl LL and StoreControl P" controllers, we are able to modernize paternosters and lifts that have a defective Cedes Safe C200 or Safe C400, for example, and keep them operational for many years to come. Our control systems fit the storage systems of all manufacturers and types. The storage systems can remain fully loaded for the conversion. We can offer special solutions as well as software connections.

For sale is an air-cooled chiller. The regulated water pump and the controlled fan make it particularly efficient. It has an integrated plate heat exchanger, an expansion tank, very quiet fans made of composite materials, and compressors mounted on vibration dampers. Partial load operation with 33% and 66% enables energy-efficient operation. The Touch Pilot control with 4.3" colour display offers a wide range of individual setting options such as time settings or night mode. Dimensions: LxWxH 2340 x 2320 x 1530 mm, weight 1,020 kg

Key data: 2000 KW, 2500 kVA, 400 V

Natural-Gas Caterpillar 3520-C 2000kw 2500kva 400 volt 50hz Natural Gas 26.122 original hours scope: Genset, control panel, Gasline, filterbox, Located in our warehouse in: General Power Holland B.V Kranenpool 10 6443VA Brunssum Netherlands info@generalpowerholland.nl Phone: +31681163153

cutting diameter: 320 mm band length: 535 x 40 x 2,0 mm capacity 90 degrees: square: 300 mm capacity 90 degrees: flat: mm cutting speed: m/min no. of strokes: 45 - 62 - 90 - 125 Hub/min total power requirement: 3,0 kW weight of the machine ca.: 0,35 Kg dimensions: 1,4 x ,4 x 1,2 m Hydraulic bow saw with: - Coolant system - Emergency stop device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CASATI veneer shears Type CIM 31 Cutting length 3100 mm Includes 2 spare blades Cutting height maximum 45 mm Cutting width with stop maximum 500 mm Electric width adjustment Minimum cutting width with stop 25 mm 2 Hand Operation With light barrier Hydraulic pressure beam Connected load 4.78 kW Including replacement plastic inserts Dimensions 4060 mm x 1500 mm x H 1600 mm Weight approx. 2200 kg

Carl Wezel Cold Rolling Mill BW500/420 Strip Rolling Mill Overhauled Carl Wezel Cold Rolling Mill BW500/420 Strip Rolling Mill Overhauled Manufacturer: Carl Wezel Maschinen- u. Werkzeugfabrik Type: BW500/420 Year of Make: 1975 Machine Type: Cold Rolling Mill / Strip Rolling Mill Modernization: Bühler-Würz Kaltwalztechnik GmbH Type: Wezel Rolling Mill Year of Make: 2015 Operating Voltage: 3AC 400V Frequency: 50 Hz Total connected load: 25 kVA Total current: 36 A Control voltage: DC 24V Location: Pforzheim

Automatic desiccant cap assembly line (silica gel). Equipped with a dual-lane system and a multi-position rotary carousel, featuring cardboard punching units, volumetric dosing, plastic seal insertion, and quality control by machine vision and dynamic weighing. Year 2012. In good condition.

Packaging capacity single jaw/double jaw: 100/200/h, sealing jaw spacing: 150mm, sealing jaw width: 250mm, product length range: 50mm-500mm, product width range: 20mm-230mm, max. product height: 120mm, max. cut-off: 650mm, max. film width: 650mm, max. roll diameter: 350mm, roll core diameter: 76mm, max. roll weight: 40kg, machine weight: approx. 850kg. Documentation available. An on-site inspection is possible.

PROFILE BENDING ROLL SHAFTS OUTPUT 90 MM - PIPE BENDING ROLL MARGI CA90H2 YEAR 2007 SHAFTS SIZE 90 MM SET OF UNIVERSAL ROLLERS SIZE 260 MM LATERAL CORRECTOR ROLLERS LEFT/RIGHT SIDE SCREW ADJUST 4 SET OF ROLLERS FOR TUBE BENDING MM 61 – 78 – 90 – 116 – CONSOLE ELECTRIC MOVABLE ON WHEELS ALL THE COMMANDS CENTRALIZED DIGITAL POSITION READOUT OF BENDING ROLLS UPPER ROLL DRIVEN MOTORIZED ELECTRIC POWERED WITH GEAR UNIT SIDE ROLLERS HYDRAULIC ADJUSTMENT POWERED INDEPENDENT WITH PISTONS CAPACITY CHART IN ENCLOSED FOR MACHINE PERFORMANCES MACHINE REVERSIBLE CAN WORK WITH SHAFTS VERTICAL AND HORIZONTAL SAFETY AND EMERGENCY STOP INSTALLED WITH THE MACHINE MANUALS AND SCHEMATICS DOCUMENTS IN ORIGINAL DIMENSION 1260 X 1000 X H1260 MM -WEIGHT 1000KG

Key data: 360 KW, 415 V

4 x Caterpillar G3412 low-hour Natural Gas Generator Sets available: 1 x 300 hrs 1 x 315 hrs 1x 2138 hrs 1 x 13,187 hrs Frequency: 50 Hz Scope of supply: Engine, Alternator, Base Frame, Control Panel. Available for sale from Gas Engine Exchange . Please check our full range of equipment at gasengineexchange.com.

29.000 hours since overhaul, Total hrs 62.568, KWe: 2000, Voltage: 11000

CARTOBOL ECOFILL MASTER "Bag in Box" automatic line for industrial liquid packaging (2021). Low usage. Designed for standard VITOP® DN15 Bag in Box fitments. Suitable for volumes from 3 to 20 litres. Complete line comprising ECOPACK MASTERFORM automatic case former for B1–B1 cartons with central sealing, minimum/maximum carton dimensions 100 × 220 / 115 × 225 mm and minimum/maximum carton height 210 / 400 mm; ECOFILL MASTER automatic filling machine with production capacities of approximately 780 bags/hour at 2.25 litres, 600 bags/hour at 5 litres and 290 bags/hour at 20 litres; 100-litre pressurised buffer tank; ECOPACK HOTMELT hot-melt case sealer; and automatic cartesian palletiser for 3 to 10 litre Bag in Box cartons, configured for continuous, accurate and reliable production.

used deck shop oven WP Carat CS 12.8Product descriptionAll-purpose oven Manufacturer: Werner &, PfleidererType: Carat CS 12.8Year of construction: 2006mobile on castors with prooferConnected value per floor 10.8 kWHearth division all stoves divisibleDetails see pictures.

NEW Machine Paper size max 54 ? 72 cm Paper size min 180 ? 300 mm Paper sheet thickness 0.90 mm Foil-pulls &, programs Standard 2 ? upgradable to 4 Heating zones 6 for optimal temperature allocation Available in following sizes: 38 x 52 40 x 58,5 56 x 77 56 x 82 64x90 Optional: Hologram unit Delivery time: 3-4 Month after order

Four-sided planer Casadei C4 Working width 220mm Working height 120mm Number of spindles 4 Spindle layout: 1.Lower 4kw 2.4kw rights 3.Left 4kw 4.Upper 4kw Spindle speed 6000r.p.m Feed speed adjustable by variator 4-21m/min Tool size 125-140mm Cardan shaft driven feed Technical documentation

Component Manufacturer / Model Year Capacity / Notes Condition Depalletiser "KETTNER PRESS UNI ABSCH Komm.Nr. 96/0143/037" — Can depalletising — start of line Good — annual overhaul Rinser (water / ClO₂) MEYER Typ: Hyet 2020 25,000 c/h Good — annual overhaul Filler — Isobaric CO₂ "KHS Inofill CAN DVD 50 (0.5L, 0.33L, Pint)" 2020 "25,000 c/h CO₂ atmosphere, foaming device, buffer tank" Very Good — 2020, annual overhaul Seamer FERRUM F 08 2020 25,000 c/h Very Good — 2020, annual overhaul Full Can Inspector "HEUFT SPECTRUM VX TI 36 Level control" 2020 "25,000 c/h Full level + quality inspection" Very Good — 2020, annual overhaul Tunnel Pasteuriser "NIKO Typ: 095.31.152.100.1 Nr. 41540/96" — Post-fill pasteurisation Good — annual overhaul Can Packer Included in line 2021 Multi-pack formation Good — annual overhaul Palletiser Included in line 2021 End ...

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.