130,817 used machines on RESALE, but how to find them? Machine Search
Watercooled chiller CARRIER 30XW 0452B0006 476 kW Cooling capacity: 476 kW / 135.35 tons (12/7 - 30/35°C) Year of manufacture: 2021 Refrigerant circuit: 1 pcs. Heat exchanger: Shell and tube Compressors: 1 pcs. Carlyle 06TUW483ST3D.A42 (screw) Type of refrigerant: R134a Dimensions: 2.73x0.93x1.7 m. Weight: 2423 kg. Working hours: 4956 h. Condition: Good
Cato PA160 Meat grinder Serial: 327 Stainless, 300L hopper capacity, 160mm diameter throat, 15Kw, comes with various size mincing plates and brand new knives and drive belts, 3Ph
feed pressure: 8,0 bar intake capacity: 180 L/min Effective free air delivery: 112 L/min Receiver capacity: 6,0 Ltr. motor: 230 V power capacity: 1,1 kW weight of the machine ca.: 14,0 kg. dimensions of the machine ca.: 380 x 310 x 490 mm Description : - portable craftsman piston compressor - permissible duty cycle up to 30% - 1-stage, direct-coupled, single-cylinder airend - Compressor mechanics working completely OIL-FREE - Very compact design for easy handling - Finely ribbed cylinder and cylinder head - powder-coated compressed air tank in RAL 7035 - Built in accordance with the European Pressure Equipment Directive - the start-up relief takes place via a mechanical vent valve The standard scope of delivery includes: - an automatically regulating pressure switch - a condensate drain plug - a pressure reducer - two pressure gauges - Safety valve - pre-assembled connection cable with p ...
feed pressure: 10,0 bar intake capacity: 345 L/min Effective free air delivery: 228 L/min Receiver capacity: 50,0 Ltr. motor: 230 V power capacity: 2,2 kW weight of the machine ca.: 51,0 kg. dimensions of the machine ca.: 800 x 390 x 750 mm Description : - mobile craftsman piston compressor - High-quality processed 1-stage compressor block - with 2 cylinders and optimal efficiency - Finely ribbed cylinder and cylinder head for optimal temperature dissipation - low compressor speed to reduce the compression temperature and minimizing wear and tear - Very low residual oil content in the compressed air thanks to precision piston rings - powder-coated compressed air tank in RAL 7035 - Built in accordance with the European Pressure Equipment Directive - all fittings are sealed with easily removable special adhesive and can easily be exchanged if necessary - the start-up relief takes place ...
feed pressure: 10,0 bar intake capacity: 727 L/min Effective free air delivery: 582 L/min Receiver capacity: 90,0 Ltr. motor: 400 V power capacity: 4,0 kW weight of the machine ca.: 91,0 kg. dimensions of the machine ca.: 1040 x 450 x 850 mm Description : - mobile craftsman piston compressor - High-quality processed, 2-stage compressor block - with 2 cast iron cylinders and optimum efficiency - Finely ribbed cylinder and cylinder head for optimal temperature dissipation - low compressor speed to reduce the compression temperature and minimizing wear and tear - Very low residual oil content in the compressed air thanks to precision piston rings - Generously dimensioned solid rubber wheels and castors at the front - the start-up relief takes place via a mechanical vent valve - powder-coated compressed air tank in RAL 7035 - Built in accordance with the European Pressure Equipment Directi ...
feed pressure: 10,0 bar intake capacity: 539 L/min Effective free air delivery: 377 L/min Receiver capacity: 90,0 Ltr. motor: 400 V power capacity: 3,0 kW weight of the machine ca.: 80,0 kg. dimensions of the machine ca.: 1040 x 450 x 850 mm Description : - mobile craftsman piston compressor - High-quality processed 1-stage compressor block - with 2x cast iron cylinders and optimum efficiency - Finely ribbed cylinder and cylinder head - for optimum temperature dissipation - low compressor speed to reduce the compression temperature and minimizing wear and tear - Very low residual oil content in the compressed air thanks to precision piston rings - Generously dimensioned solid rubber wheels and castors at the front - the start-up relief takes place via a mechanical vent valve - Powder-coated compressed air tank in RAL 7035 - Built in accordance with the European Pressure Equipment Direc ...
CATERPILLAR C 175-16 year 2011 hours 100 power 3000 kva includ dry cooler and muffler loaded now in paris
Canapa SAP 8 LA strapping machine Fully automatic strapping machine With integrated transport system - photocell-controlled In the SAP-8A/LA fully automatic machines, photocells detect the beginning and end of the package, control the transport unit (driven rollers or belts) and trigger the strapping process. More items - new and used - can be found in our shop! International shipping costs on request!
Complete brewery 2 appliances - 6 hl per brew 1 brew per day possible Year of manufacture 2013 - Manufacturer: Caspar Schulz / Germany Consisting of: malt reception and transport 2 devices brewhouse - lauter tun - wort cooler - fermentation and storage tanks - brewhouse technology complete - bottle filler - KEG cleaner etc. - PROJECT: BRAU-KOMPLETT-25-6HL-2GER-HEBAF
Used Capping Machine AVE 6T up to 7000 bph The used capping machine AVE 6T up to 7000 bph delivers high efficiency and versatility for the bottling industry. Specifically, it handles medium to high-speed production lines, ensuring consistent and reliable results. Furthermore, the machine for Stelvin Lux uses six capping heads to provide precise and uniform operation throughout every bottling cycle. Moreover, its design maximizes production speed, enabling the handling of up to 7000 bottles per hour. This performance, in turn, supports businesses aiming to improve operational efficiency and maintain consistent product quality. The system supports aluminum screw caps of the Stelvin Lux type, measuring 30×60 mm. Consequently, this cap type creates an airtight seal, preserving product integrity and extending shelf life. Producers in the wine and beverage industry often choose this forma ...
Vertical tank made of AISI 304L stainless steel. Manufacturer: CALDERINOX. On legs. Capacity: 40,000 l. Top and bottom entrances. Mineral wool insulation. Atmospheric. Design temperature: 85º. Use
In very good condtion. Needs new tyres The machines comes with CE cetification 61HP
Syngas Gasification Plant Caterpillar 5 generators G3516 1375 KVA 3 boilers, 1 turbine transformer cell, dry cooler, compressor . complete installations year 1997 in new condition all installations less than 500 hours
Availabel from German Stock ! 80x Part number Cat 229-9942 - Cylinderheads Gas Engine Serial G3512, G3516, G3520 Partnumbers CAT 415-5584, 315-2630, 315-2632 Naket Cylinder Heads
Aircooled chiller CARRIER 30RBM 260 0014 PE 261 KW Cooling capacity: 261 kW / 74.21 tons (12/7 — 35°C) Year of manufacture: 2015 Options: Hydraulic module Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum. Compressors: 4 pcs. Danfoss SH295A4ACE (scroll) Type of refrigerant: R410А Number of fans: 4 pcs. Hydraulic module: 1 pcs. water pump Lowara 00PPG000495200A, expansion vessel. Dimensions: 2.41x2.26x2.3 m. Weight: 1651 kg. Working hours: 1804/1756/1835/1723 h. Condition: Good
Key data: 2647 KW, 1000 1/min
Surplus/Never used or installed, High suction pressure compression set unit of 5000 PSI, speed of 1000 RPM, 3550 HP, 10 MMSCFD flow rate. This compressor package consist of: One (1) Caterpillar G3612 LE, one Ariel Compressor JGD/6, Murphy Controls, Cooler and all auxiliary components. This unit was manufactured in 2015, but the project was cancelled. The compressor unit was never used or installed, having undergone a preservation maintenance in 2019. Recently inspected by Enerflex. It was found in excellent conditions!
Carnaghi Ø 1700 mm CNC Chuck dia.: 1600 mm Max turningdia -- passage: 1700 mm Max hight of workpiece Z-axis: 1000 mm Command: E.C.S CNC 2600 Turret: yes Qty Tools: 7 Coolant pump: yes
Used for non-round fish cans,, filling via auger,, Speed infinitely adjustable via potentiometer,, No can - no filling, The holes in the plates for filling the spices into the cans have the following dimensions:, length: approx. 115 mm, width: approx. 50 mm,, Overall measurement of the machine: L x W x H: 860 x 1,000 x 1,700 mm., The year of manufacture is unknown, we assume that it is around 20 years old., We have no documentation for this machine.
Carnaghi ABH 1550 - Ø1600 mm Chuck dia.: 1200 mm Max turningdia -- passage: 1400 mm Max hight of workpiece Z-axis: 1000 mm Command: E.C.S CNC 1400 TOOLING: yes Turret: yes Qty Tools: 7 Coolant pump: yes
Key data: 7370 KW, 9213 kVA, 11 V
Five (5) Surplus/Never use/Never Installed, Caterpillar 16CM32C, 7370 kW, 11,000v. 60 Hz. These units can burn Diesel, Gas Oil, Marine Gas Oils (MGO), Marine Diesel Oil (MDO). Year of Manufacturing of this power plant is 2009. The sale of these units include: Barring Gear, Air Intake System, Fresh Cooling Water System, Exhaust System, Diesel Oil System, Lubrication System, Air Starting System, Control Systems and more The generator is a GE Synchronous Generator, 9213 kVA, 7370 kW, 10 Poles, 720 RPM, 11,000v. 60 Hz. 0.8 P.F. IP54 IC81W. This unit comes with IMO Tier II certification and ABS certifications for the Heat Exchangers, Flexible Couplings, Diesel Engine and Generator. The shelf life of these units is over the five-year limit given by Caterpillar. Therefore, these units no longer have the Caterpillar Warranty. Unit is now ready for shipment.
Tie bar expansion nut, adjustment nuts and split nuts for die casting machines from IDRA, Frech/Müller Weingarten, OP Die Casting Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Condition New The mother is new and fully functional. The goods can be viewed, checked and picked up at any time. We will also be happy to send you a sketch of the execution or deliver the goods to your address. Attention: We offer various columns, adjustment nuts, spar expansion nuts and 2 piece nuts of: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Naughty: D375, D330, D300
Siemens Megalix CAT 125/15/40/80-121 GW Focal spot 0.3/0.6/1.0 Tube Housing Model No. 5764522 Tube Model No. 3800351 • Before taking over, all devices or systems have been tested on site for their functionality. • The tube is located in our warehouse in Freiberg / Germany. • You buy the tube in "IST" condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system component must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!
Siemens Megalix CAT 125/15/40/80-122 GW Focal spot: 0.3/0.6/1.0 Tube Model No. 3800351 • Before taking over, all devices or systems have been tested on site for their functionality. • The tube is located in our warehouse in Freiberg / Germany. • You buy the tube in "IST" condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system component must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!
Siemens Megalix CAT 125/15/40/80-122 GW Focal spot: 0.3/0.6/1.0 Tube Model No. 10144179 • Before taking over, all devices or systems have been tested on site for their functionality. • The tube is located in our warehouse in Freiberg / Germany. • You buy the tube in "IST" condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system component must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!
Case Puma 160 4WD tractor, Technical specifications:, - Year of construction: 2014, - Operating hours: 9150h, Engine & Performance:, - Engine: 6-cylinder, 6.7l turbo diesel, - Engine power: 160 hp (119 kW), - Max. power: 203 hp (151 kW)
Original Case backhoe bucket, as new, 60 cm, Further range of backhoe buckets for all common construction machines, excavators, quick-change systems, such as Martin, Geel, Winkelbauer, Lehnhoff, Verachtert, JCB, Geith, etc. available.
Make: CARRIER Type: 30AWH016H-9 Power: 16kW Three-phase 380V for heating and cooling with built-in pump, expansion tank, control 1" inch connectors NEW Original packaging
Make: CARRIER Type: 30AWH008H Power: 8kW Weight: 120kg Single-phase 230V for heating and cooling with built-in pump, expansion tank, control 1" inch connectors NEW Original packaging
Make: CARRIER Type: 30AWH012HD9 Power: 12kW Three-phase 380V for heating and cooling with built-in pump, expansion tank, control 1" inch connectors NEW Original packaging
Make: CARRIER Type: 30AWH015HD9 Power: 15kW Three-phase 380V for heating and cooling with built-in pump, expansion tank, control 1" inch connectors NEW Original packaging
used
NEW UNUSED G3412 year 1995 -470HP- NATURAL GAS only engine
Height=1.612 m, Overall length= 1.127 m, Overall width= 0.75 m, Producer: Astor Blades condition: Renovated In store Made in Germany Description for trays 400x600mm universal tray lock ruler cake cutting templates Pneumatic knife PM10 works on compressed air 2 types of blades
Height=1.612 m, Overall length= 1.127 m, Overall width= 0.75 m, tray max. dimensions: length 800 mm, width 600 mm Condition Used Producer Krumbein Made in Germany Description Krumbein KSSM 1,4 D semi-automatic cutting machine single blade cutting system cutting takes place on two levels – the first level is cut transversely the second – longitudinally raising the tray from level to level is done manually the distance between the knives can be adjusted the knives are easy to remove product max. height 55 mm power 400 V/3 Ph/ 50Hz 1,6 A
Height=1.612 m, Overall length= 1.127 m, Overall width= 0.75 m, tray max. dimensions: length 800 mm, width 600 mm Condition Used Producer Krumbein Made in Germany Description Krumbein KSSM V 0,1 D semi-automatic cutting machine double blade cutting system cutting takes place on two levels – the first level is cut transversely the second – longitudinally raising the tray from level to level is done manually the distance between the knives can be adjusted the knives are easy to remove product max. height 55 mm power 400 V/3 Ph/ 50Hz 1,8 A
Height=0.82 m, Overall length= 1.01 m, Overall width= 1.12 m, dosing volume: 30-300 ml In store Made in Italy Description The pneumatic dispenser is designed for dispensing liquid dough and creams in confectionery bunker – approx. 30 l dosing nozzle – Ø 22 mm the machine is completely made of stainless steel renovated
Clamping Force: 420 ton // Shot Weight (Max): 1555 g
- Feeder - Digital control - 4 pockets - Perforating modul - Mobile delivery
Emmegi under-table cross-cut saw with automatic stop Type: Calvet 300 M saw blade coming from below max. saw blade diameter 300 mm with automatic stop – Fence pushes the clippings onto the the cutting position right long table with automatically movable stop left long roller conveyor Weight approx. 500 kg with stop table and roller conveyor
C(2 x CAM G35 available - In Stock) Originates from a high-profile pharmaceutical plant in Europe. CAM G35 automatic bundler overwrapper for individual boxes and bundles (single layer and stack up). Working Description: Suitable for boxes, cartons, trays or other square shaped products. Can be used with the following materials: foils (cellophane, PP, others) - and kraft paper. Technical Information: Format range - for individual boxes: width 20mm to 300 mm, height 10mm to 90mm, length 50mm to 200mm; package/bundle of boxes: width 50mm to 300mm, height 30mm to 150mm, length 50mm to 300mm. Mechanical speed: 6 to 35 strokes per minute. Siemens S7-300 PLC Control Pannel. Manuals included. Machine size: 2700mm x 1600mm x 1750mm high, approx. weight 1850kg
1 CAMPANINI ball winder type Semiaut, 16 spindles, creel for 32 bobbins, year 1989
Used evaporating machine for milk and caramel masses made by Spomasz Pleszew, type: DUO CAA-9
General SKU203U020 LocationBarneveld MakeCarl Canzler Type1640 Ltr. No.15451 Year of construction1974 Pressure Working pressure3 Bar Main Features MaterialMonel Volume1640 Ltr. Pressure3 Bar Specified Features - Pressure vessel MaterialMonel 2.4360 Capacity1640 Ltr. Vessel sizesdia. 1200x1300 mm Dished topcheck Dished bottomcheck Top connections2x DN50, DN100 OutletDN50 Max. temperature120 °C Information Mounted on legscheck Weight450 kg Floorspace1,5x1,2 m Total height2,6 mPressure vesselsCarl CanzlerTanks > Pressure vesselsBrand > Carl Canzler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU204U1433 LocationBarneveld MakeCollin Type202x400 No.1209-06-07 Year of construction2007 Main Features Motor2.5 KW Width405 mm Specified Features - Roll compactor MaterialStainless steel Roll compactorTwo roll mill Roll width450 mm Roll diameter202 mm Motor2,5 kW, 400 volt, 4000 Nm Roll speed0,3-4 rpm Rolls can be adjustedcheck With hydraulic unitcheck Information Mounted on framecheck ( steel wheels) Total height1,96 m Weight1900 kg CEcheck Floorspace2,25x1,34 m Extra SpecificationsWork width 405 mm. walz tempering, +5 till +50°C. Fast hub back walz 80 mm, fine hub 0.08-2.99 mm. pressure cap. 100 kN. Without 2-roll walzen Roll compactorsCollinCompactors > Roll compactorsBrand > Collin What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are ...
General SKU300U1003 LocationBarneveld MakeCI Electronics Type195/36 Sade P2 No.TP595 Main Features MaterialStainless steel Specified Features - Miscellaneous transport MaterialStainless steel Information Floorspace0,80x0,65 m CEcheck Total height1,37 m Weight70 kg Extra SpecificationsTablet/capsule weight sorter, capacity: 5-2000 milligrams, processing 55 tablets/capsules per minute.Miscellaneous transportCI ElectronicsConveying systems > Miscellaneous transportBrand > CI Electronics What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU392W1203 LocationBarneveld MakeSGL Carbon TypeRS 77-1-37.40.1 No.41037886/1 Year of construction2015 Pressure Working pressure shell6 Bar Vacuum possible shellcheck Working pressure tubes6 Bar Main Features Shell (Material)Mild steel Tube (Material)Diabon Surface12.5 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Diabon, Mild steel Heat exchangercheck Verticalcheck Heating surface12,5 m2 Tube capacity90 l. Number of tubes:37 Tube diameter32 mm Tube length4000 mm Wall thickness tubes22 mm Max. temperature180°C Shell capacity165 l. Shell diameter336 mm Shell length4011 mm Max. temperature180°C Shell connectionsDN100 Information Total height5,170 m Weight670 kg CEcheck Floorspace0,65x0,65 mShell and tube heat exchangersSGL CarbonHeat exchangers > Shell and tube heat exchangersBrand > SGL Carbon What you can expect from ...
General SKU204U929 LocationBarneveld MakeCollin TypeForm 202x400 Year of construction2006 Main Features Motor2.5 KW Width405 mm Specified Features - Roll compactor MaterialStainless steel Roll compactorTwo roll mill Roll width405 mm Roll diameter202 mm Motor2,5 kW, 400 volt, 4000 Nm Roll speed0,3-4 rpm Rolls can be adjustedcheck With hydraulic unitcheck Information Mounted on framecheck Mounted on wheelscheck ( steel wheels) Floorspace1,34x2,25 m CEcheck Total height1,96 m Weight1900 kg Extra SpecificationsWork width 405 mm. walz tempering, +5 till +50°C. Fast hub back walz 80 mm, fine hub 0.08-2.99 mm. pressure cap. 100 kN. Without 2-roll walzen Roll compactorsCollinCompactors > Roll compactorsBrand > Collin What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwid ...
General SKUR0815 LocationBarneveld MakeCalorifer AG (CH) TypeRectifying Column No.88090 Year of construction1989 Pressure Working pressure2 Bar Vacuum possiblecheck Specified Features - Distillation MaterialStainless steel 1.4435 (316L) Capacity1256 Ltr Column sizesdia.500mm x6350mm Number of columns:(10 theor. stages) Max. temperature200 degr.C. Information Total height6,5 M Weight750 kG Floorspace0,8x0,9 M Extra Specifications Top cover is missing Technical specs Extra informationMontzpacking type B1-250 material 1.4404 , height 4500mmDistillationCaloriferColumns > DistillationBrand > Calorifer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more ...
maximum number of results exceeded
please refine your search
