ca used for sale

Calamit Magnet Weight: approx. 65 kg Dimensions : 300 x 200 x 165 mm Shipping is of course possible. Shipping is subject to freight and packaging costs, depending on size and weight. (Subject to changes and errors regarding technical data and prices!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

2 pieces of Caterpillar 3408 B injection pumps in pre-chamber design for sale. Both injection pumps completely overhauled.

Used carton wrapper by CAM in 2014 model G35 Machine in very good condition. Full technical documentation available and detail description below. Year of manufacturing 2014. Technical data and packaging length: mm. 2635 width: mm. 1595 height: mm. 1635+90-10 net weight: 1350 kg gross weight: Kg 2000 minimum speed: 6/1' cycles Maximum speed: 35/1 cycles Film Roll Autonomy: 8-10 hours volume:

SPECIFICATIONS: Machinable length: max. 600 mm Pneumatic adjustment 01 Sawing unit 02 milling motors (1.5 kW) With loader.

SPECIFICATIONS: Installed power: 5.5 kW 2 flywheels Ø 450 mm Sanding belt length: 4900 mm 2 speed settings

Vertical milling machine SPECIFICATIONS: Spindle milling machine: Ø 25 mm Speed: 12000 rpm Installed power: 2.2 kW ACCESSORIES: 3-roller drive with speed controller

SPECIFICATIONS: Max. cutter diameter mm: 55 Voltage: 380 V

Gauge block box, gauge blocks, parallel gauge blocks, test pin set, test pins, plug gauge -Manufacturer: Cary, plug gauge test pin set: 3.01 - 3.49 mm -Content / nominal dimensions: see photos -Dimension box: 135/85 / H60 mm -Weight: 0.3 kg

Code 230605 Description Vertical SLOTTER Make CABE Model 150 ST Serial no. Year 19.. Max. stroke 150 mm Table size Ø 250 mm Table longitude 200 mm Table cross 100 mm Table turning 360 degrees Gap 250 mm Distance tablecenter – column : min / max mm Max. height mm Speeds 32 – 50 – 70 – 95 strokes/min Motor 1.5 kW 380 volts Accessories Head swivels left-right 20° Turning table ( with dividing ) Ø 250 mm Machine size L x W x H 1000 x 600 x2000 mm Weight 750 kgs Remarks Machine is in good condition.

SPECIFICATIONS: Suitable for processing backrests Number of spindles: 06 Speed: 10,000 rpm variable Max. machining depth: 50 mm Bending radius of the working table min - max: 300 - 900 Pneumatic workpiece clamping

SPECIFICATIONS: Power horizontal milling motor: 3 kW Variable speed drive: 0.37 kW Equipment: 01 Automatic loader

SPECIFICATIONS: Installed power (hydraulic pump): 4 Kw Double pump GR2+GR2 14 cm³+14 cm³ Dimensions: 3500 x 1300 x 2200 mm Output per hour: 100 chairs/h Safety precautions

Machine Details Stock-No. 1105-03893 Type of machine Surface Grinding Machine - Horizontal Make CANTALUPPI Type 2100 x 450 Year of manufacture 1975 Type of control conventional Storage location FRANCE Country of origin Germany Delivery time immediately Freight basis EX WORK Technical details grinding length 2100 mm grinding width 450 mm workpiece height 650 mm table surface area 2200 x 750 mm distance table - spindle center max. 600 mm table speeds 1 - 25 m/min Cross Feed Autom. 1 - 60 mm/stroke grinding wheel size 400 x 100 x 76 mm grinding wheel speeds 1450 rpm total power requirement 15 kW Additional information Accessories: Magnetplate, 2100 x 400 mm, grinding wheel with flange, draw-off Device.

Siemens X-ray tubes Type Megalix Cat 125 / 35 / 80 - 121 GW Siemens article number 05764606 Type Megalix Cat 125 / 15 / 40 / 80 - 121 GW Siemens article number 05764522

Impeller D.477 with ceramic paint YYKM250RNA/75/CS-5 1-Y400741 for CAPRARI PUMP KCM250TA+180042N1/SF – 496930/2 8211805 - 2 pcs

Machine for the production of backrests of chairs.

SPECIFICATIONS: Double frame press for chair production Hydraulic operation Dimensions: 3500 x 1300 x 2200 mm Protective devices Production: 100 chairs/h

Planing width 410 mm Xylent Shaft Electric thickness table lift with digital display AVAILABLE FROM STOCK

CAM RV-P high speed overwrapping machine with plate sealing for cartons, folding boxes, etc. in heatsealable foil (PP, PVC, Polyethylene, laminated papers, wax papers, etc.), carton size range min. 40 x 15 x 60 mm (AxBxC), max. 110 x 50 x 220 mm (AxBxC), foil width from 90 to 335 mm, capacity up to 150 strokes per minute, machine floor space approx. 3505 x 2085 mm (LxW), machine height approx. 1670 mm, machine net weight approx. 1750 kg

We have a revised 3412 integral motor unit available to be used as a generator or converted into a motorcycle pump. Manufacturer: CATERPILLAR Model: 3412 Arrangement: 2385363 Serial Number: 41202591 Power: 682 KW Type: Stationary Diesel Manufacture: 2004 Rated rotation: 1,800 RPM

Key data: 5 , 50 , 3147

Edge banding machine with joining unit Alternating pool Automatic edge magazine up to 5 mm strips Clip Flat milling round Pulling blade edge Flat brick blade Brush / Scabible

Cavagnino & Gatti labeller Mod. GTC5/2 3XPSPSFGMP Year 2013 minimum length of the labels: 15 mm maximum length of the label: half the circumference of the bottle long/short label length difference: min 5 mm empty space between labels: min 15mm

Hydraulic pump, oil pump, gear pump -Manufacturer: Casappa, hydraulic pump -Type: PLP30.27DO-83E3-LGF/GE-N -Shaft: Ø 19 - 22 mm M14 x 1.5 - Connection: G3/4 , G1 -Dimensions: 175/125/H155 mm -Weight: 9kg

Mould transport system, capway

Mould conveyor belt, Fabr. Capelleveen,

Saugdepanner, Fabr. Capelleveen, Type CAPGRIP CAD

Furnace unloader for continuous furnace, Fabr. Capelleveen

Used bottling line by Pack-Trend, new 2020. Machine type: Dispensing, capping, labelling machine Weight: 675kg Type of medium: liquid, gel, cream. Material stainless steel AISI304 Machine capacity: up to 900 cycles/hour Packing portion: 0,1-0,5 L Machine dimensions working: Height H - 1600mm Width B - 1500mm Length L - 3000mm. Electrical supply: 230V/50Hz Pneumatic Supply: 6-8 bar Power consumption: 1500W Accessories: ROTARY RECEIVING TABLE ROTARY INFEED TABLE Certification: CE Technical and Operational Documentation.

Telescopic conveyor, unloading telescope, telescopic belt conveyor - extendable conveyor belt Properties: Used telescopic belt conveyor Condition: fully functional with signs of wear Ideal for fast material transport Expertly dismantled and packed Year of construction: 2003 Colour: Grey Telescopic belt conveyor Total length retracted: approx. 5,080 mm Total length extended: approx. 11,650 mm Total width incl. control cabinet: approx. 1,250 mm Total width without control cabinet: approx. 930 mm Belt width: approx. 600 mm Strap Type: Smooth Incl. feet Incl. control cabinet 1 Piece in stock Price per piece

USED TETRA PAK CAP APPLICATOR 30 FLEX FOR SALE Item #: Usm-179 Category Cap Applicator One Used Tetra Pak Cap Applicator 30 Flex For Sale: Flexible cap applicator for portion and family packages of aseptic brick pack product Output: 6600 - 9000 packages per hour Package volume: 200 - 2000 milliliters Package types: Tetra Gemina® Aseptic, Tetra Brik® Aseptic, Tetra Prisma® Aseptic (different package types and sizes may require OEM change parts) Allen-Bradley Logix5561 controls Nordson hot melt glue unit Stainless steel construction Touch screen HMI Servo driven Electrical Information 400/230 Voltage 3 Phase 60 Hertz

Technical details: RA1025 Manufacturer: Caljan Type: belt curve 60° CC 080 XBK 641 / 054 Year of construction: 2008 Angle: 60° Direction: Left Nominal radius: approx. 600 mm Width: 500 mm Conveyor speed: v = 17 m / min v = 0.28 m / sec Top height cheek: 860 mm + 200 adjustment Strap type: E12/2 UO/U6S GSTR C black Number: 1 x (article no. 20140027) Condition: Used / fully functional Color: Blue (RAL 5002) More information: incl. 2 supports Gear motor Manufacturer: Lenze Features: Construction year: 2008 condition: very good (used) Nominal / inner radius in mm: 600 Belt width in mm: 500 angle: 60° Driven: YES Running direction: LEFT Engine type: Lenze Getriebemotor Conveyor speed m / s: 0,28 scope of delivery: including supports Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir  ...

Recon Standard dimension Polished Part Number: 7W0212 Iincl. 2 gears Attention: We also have various other RECON parts from different manufacturers / types available. We would be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 2128176 Attention: We also have various other RECON parts from different manufacturers / types available. We would be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 2659105 Attention: We also have various other RECON parts from different manufacturers / types available. We would be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 1069872 Attention: We also have various other RECON parts from different manufacturers / types available. We would be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Manufacturer: Camozzi, pneumatic cylinder type 25N2A25A660 unused Ovp -Stroke: 660 mm -Piston: Ø 25mm -Piston rod: Ø 10 mm -Number: 2x cylinders available -Price per piece -Dimensions: Ø 27 x 800 mm -Weight: 1.0 kg/piece

Chuck flange, flange holder, lathe chuck flange, driving flange -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Outer diameter: 315 mm -Adapter: Short taper 6 / cone 103 - 105 mm short taper flange with Camlock fastening -Bolt circle: Ø 135 mm -Dimensions: Ø 350 x 90 mm -Weight: 19 kg

CNC Vertical Lathe PIETRO CARNAGHI Model AP 140 TMY Year: 2013 Never used Table Diameter: 10000mm Max. swing: 14000mm Max. loading on table: 500t Max RPM: 0.2-35 Turning height: up to 8900mm CNC Siemens 840D Ram size: 600x600mm Ram stroke: 4000mm Milling head power: 100kW Machine is packed in containers and ready for shipment. The machine was assembled by manufacturer, tested, disassembled and shipped to the buyer. And was never installed after that.

Turbomixer: 300 liters, brand: Caccia, stainless steel, engine: 380 V 2 speeds; 1st gear: 63 hp at 1800 rpm and 2nd gear: 75 hp at 2960 rpm.

Crane block, crane hook, load hook, single hook -Crane hook: load hook with adapter frame -Load capacity: 7.5 t -Dimensions: see photos -Transport dimensions: 860/470 (H460 mm -Own weight: 77 kg

hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Stankoimport Caenaho, hydraulic unit -Motor: 220/380 V/ 1400 rpm -Individual components: Technical data see photos type plates -Dimensions: 420/380/H310mm -Weight: 30 kg

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Hydraulic unit type CB140 H 116 -Pressure: up to 150 bar -Flow rate: 6 l/min -Hydraulic tank: with level indicator -Individual components: see photos -Dimensions: 700/400/H710 mm -Weight: 125 kg

Ref. -No.: 10157 Manufacturer: CARL ZEISS Year of construction: 1997 Type of control: HP 9000 Serie 700 Control: Betriebsystem HP-UX.9.05 Storage location: Halberstadt Country of origin: Deutschland Turntable: 1000x2100 mm Machine weight: 4.800 kg Machine Height: 3050 mm Table height above the floor: 850 mm X-Axis: 850 mm Y-Axis: 1800 mm Z-Axis: 600 mm Further information: Three coordinate measuring machine Microcomputer control X-axis as a longitudinally movable portal Y-axis cross slide in the portal Z-axis as measuring head quill (vertical) Passage between the portal approx. 1,000 / 1080 mm Passage in height approx. 750 mm

1 pc. used worm drive motor - 5 cyl. radial piston motor ex Küpper-Weiss automatic spreader. Engine has run until the spreader is retired, sold as an untested spare parts carrier. More used parts as well as used winter service technology in stock - see example photos! ------ Jodau Municipal, Environmental & Green Maintenance Technology ------- Used machines for plant and sports field maintenance, gardening and landscaping, cemetery technology and winter service, sweeping and waste disposal, environmental maintenance, engines and more...

Telescopic belt conveyor Caljan Long John LJ3 Medi 600-5/6,5 RA2165 Base part with 2 electrically retractable and extendable telescopic elements. The telescope can be infinitely extended up to 11500 mm by pushing a button. Length base part: 5000 mm Width base part: 920/1000 mm Height base part: 770 mm, 1100 mm Transfer to conveyor technology Extension: 6500 mm Total length: up to 11500 mm Band width: 600 mm Condition: Overall condition good Load: up to 50 kg/m Nominal voltage: 3 x 400 VAC + PE Frequency: 50 Hz Fuse: 16 AMP optional: upgrade with start-up and clearing function Features: Construction year: 1998 condition: good (used) Conveying length in mm: 5000+6500 Nominal / outside width in mm: 1000 Belt width in mm: 600 Driven: YES KW: 1,75 Ampere: 16 Conveyor speed m / s: 0,5 Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktie ...

Oven Make: Carbolite Model AX60 395mm high x 400mm wide x 420mm deep 220/240 volts Single phase

Pulverbeschichtungsanlage für Autofelgen Kann 4 Stück 22"-Felgen in 1 Charge pulverbeschichten Komponenten der Anlage: 1,5x1x1,28m Pulverbeschichtungsofen, 18KW elektrisch VFK-2 einseitige manuelle Pulverbeschichtungskabine Förderstrecke und Ladewagen Manuelle Pulverbeschichtungsanlage Lieferung - 8 Wochen EXW Istanbul Fabrik Inklusive Montage und Schulung Powder coating line for car wheels Able to powder coat 4 pcs of 22" rims in 1 batch Line components: 1,5x1x1,28m powder coating oven, 18KW electrical VFK-2 single sided manual powder coating booth Conveyor track and load trolley Manual powder coating equipment Delivery - 8 weeks EXW Istanbul Factory Assembly and training included

CABLE POWDERING MACHINE FOR ELECTRICAL CABLES EXTERNAL DIMENSIONS Length : 1.000 mm Width : 1.000 mm Height : 2100 mm CABLE PASSAGE Size : 100 mm diameter Height from ground : 1.000 mm Cable insulation material : PVC, PE, XLPE to be used Cable size to be powdered: 5–70 mm diameter HIGH VOLTAGE UNIT Input voltage : 14V 16kHZ Output voltage : 100 kV Max. current : 120 µa Polarization : Negative TECHNICAL SPECIFICATIONS OF THE MACHINE Input : 220V 50 Hz Installed power : 1 KW Extraction fan : 3.000 m³/h 0,75KW Vibration : 0,15KW 220V Compressed air : 6-10 bar Air consumption : 300 lt/min Filtration : 320x300mm polyester filter Filter cleaning : Automatic Powder recycling : Vibration sieve Powdering method : Application by 2 electrodes, electro static application

PICKLING CABINET FOR CLEANING INOX PRODUCTS BEIZSCHRANK FÜR DIE REINIGUNG VON INOX-PRODUKTEN CABINET INTERNAL DIMENSIONS Length : 5.000 mm Width : 2.800 mm Height : 2.900 mm Material : Insulated sandwich panels, fire protected Basement : 150mm Illumination : 2x36W Exproof Zone-2 Entry door : Insulated sheet metal door Emergency door : 1 set Working temperature: RT WORKBENCH Length : 1.800 mm Width : 800 mm Height : 900 mm Ventilation : AISI304 extraction fan, circular air duct Material : PP material body, removable splash covers Grid : AISI304 stainless steel Sink : PP material Accessories : Hose reel, wardrobe Droplet separator WASTE WATER ROOM Length : 2.000 mm Width : 2.800 mm Height : 2.900 mm Basement : 150mm Illumination : 2x36W Exproof Zone-2 Entry door : Insulated sheet metal door Working temperature: RT Emergencydoor  ...

2 New adapter cables for DRO Heidenhain 2 universal extension cables DRO