c wrap label used for sale

Very high-quality CNC – controlled precision sheet metal bending machine with automatic bending sequence calculation – automatic, CNC – controlled double-sided pre-bending – conical bending device Roll diameter 350 mm Smallest weft diameter 1.1 x the roll diameter = 385 mm Maximum bending length 3,000 mm Nominal pre-bending performance over the entire bending length at 5 x D = 18 mm for sheet steel/ST40 Nominal bending performance over the entire bending length at 5 x D = 22 mm sheet steel/ST40 Drive power 22 kW Weight 13,500 kg. Three hydraulically driven rollers (one hydraulic motor per roller) - The rollers run in bronze plain bearings Hydraulic linear sub-roller adjustment Hard chrome-plated piston rods Hardened and ground rollers PILZ® Laser Validation BECKHOFF® CNC – Control with Ethernet technology and large touch screen DANFOSS® Precision Hydraul ...

Very high-quality CNC – controlled precision sheet metal bending machine with automatic bending sequence calculation – automatic, CNC – controlled double-sided pre-bending – conical bending device Roll diameter 350 mm Smallest weft diameter 1.1 x the roll diameter = 385 mm Maximum bending length 3,000 mm Nominal pre-bending performance over the entire bending length at 5 x D = 18 mm for sheet steel/ST40 Nominal bending performance over the entire bending length at 5 x D = 22 mm sheet steel/ST40 Drive power 22 kW Weight 13,500 kg. Three hydraulically driven rollers (one hydraulic motor per roller) - The rollers run in bronze plain bearings Hydraulic linear sub-roller adjustment Hard chrome-plated piston rods Hardened and ground rollers PILZ® Laser Validation BECKHOFF® CNC – Control with Ethernet technology and large touch screen DANFOSS® Precision Hydraul ...

I sell a 4-side brush machine suitable for windows, turrets, tables, etc. Futura MS120 Y1 X2, built in 2005 Working width 1200mm Working height 200mm Total weight 2500kg Configuration: Side grinding heads left - right H.170mm 2 underheads left - right nylon B.140mm Oscillating top head B.260mm Large grinding heads top - bottom B.1150mm Machine together with all the heads on the picture. Available the same.

Measurement data acquisition device, test device, telemetry system, Can-Bus monitoring -Gemac: CANobserver -Art.Nr.: 22550-00 -Number: 1 pieces -Dimensions: 115/50/H125 mm -Weight: 0.5 kg

Bottle filler, Fabr. SEN, type Combi-RE H2, with 30 filling organs and 6-digit KK, set up on 0.5 lt + 0.33 lt NRW Longneck + 0.5 lt EURO-Fl, running direction: left --> right, with vacuum pump (slightly leaking), discharge table, various spare parts, S5 control, incl. operating instructions, built in 1991, already removed

vertical multi-stage centrifugal pump with opposite suction and pressure nozzles, water pump with 15 kW, nominal flow rate 108 m³/h and nominal head 64.4 m, freight can be organized

Switchgear, control, flame sensor, flame monitor, UV flame sensor, UV sensor -Manufacturer: Siemens, infrared flame sensor OVP -Type: QRA55.C17 -Voltage: 100-110 V -Dimension box: 220/65/H65 mm -Weight: 0.5 kg

Cyclone separator C5 for Bofa extraction to be used as a pre-filter for dry, large amounts of dust MA-201120 VAT will be shown Delivery: EXW, collection possible

CSAT printing system for blister film coloured printing. Unit is suitable for printing counterfeit-proof solutions for pharmaceutical packaging. Resolution: 1,200 dpi, output: 0.5 to 20 m/min.

Film wrapping machine with infeed conveyor, stacking device, outfeed conveyor with 90° curve and other outfeed conveyor 90° to the machine. PLC: SCHNEIDER. Output: 60 bundles/min.

Frequency converters, frequency converters, drive converters, controllers, variable speed drives, solar cables, inverters, data processing devices, microloggers -Campbell: Scientific SDM-CAN Datalogger -Dimensions: 235/110/H20 mm -Weight: 0.3 kg

aschinella details Warehouse number 1105-03375 Machine type Milling machine - Universal CmE brand Type FC 1100 Year of construction 1991 Control type NC Storage location FRANCE Country of origin spain Delivery time immediately Freight base from stock Technical details x-travel 1100 mm y-travel 700 mm z-travel 500 mm Receiving cone of the main spindle 40 SK Motor power 10.6 kW Table clamping surface 1400 x 450 mm Speed 40 - 1800 rpm Dimensions L-W-H 2.4 x 2.15 x 2.1 mm Machine weight approx., 3800 kg Information Equipment: - Heidenhain - Control model TNC 124 - Universal milling head "Huron" design - 2 counter holders for horizontal milling - autom. Tool clamping - Lighting - Central lubrication

Grundfos pump, order number 96500570, power, 4 kW/ 50 Hz, good condition - ready for use

Tapping machine, pipe thread cutter -for: pipe size max. 2 inches -Speed: 72 rpm -Foot switch with: emergency stop function -Pipe cutter -Interior deburrer -Operating voltage: 220 volts -Dimensions: 1100/560/H1140 mm -Weight: 126 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Dimensions: 10 x 88 mm -Length: 2000 mm -with: storage box -Weight: 13.2 kg

Schnitzel plug completely stainless steel Track width 600 mm infinitely variable speed 0.60 kW Dimensions (L x W x H) : ± 1,900 x 1,000 x 1,500 mm Mobile

Relief powder system Caslon Mini Supa Duchess; good condition; cleaned and tested; with an investor, which is sold as defective because parts are missing; Working width 330mm; Vibration function. Thermography machine Caslon Mini Supa Duchess; good condition; cleaned and checked; with feeder which one will be sold als spare part becuase of missing parts; working width 330mm; Joggers.

Engine QSF3.8 97kW Condition - new Manufacutred by Cummins Inc. Engine serail No 76501916 Family KCEx103.8AAB Gross Rated kW - 97kW at 2500 rpm Idle RPM 950 Gross weight - 440 kg In stock 4 pcs Hakusanat: CM2350 Continental P5317106 1T2350A07192732 T1669 FS109S CB80031.12 BFCEC P5476423 S03068876501946

Cooking length 4,000 mm Track width 600 mm completely stainless steel steam-heated with electric lifting device Temperature distribution in 2 zones Dimensions (L x W x H) : ± 5,000 x 1,550 x 2,200 mm infinitely variable speed

Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - HDP350 high-pressure gun with quick coupling and swivel joint in the input - Double jet tube with nozzle 065 and low pressure nozzle Optional (additional cost): - Hose reel - 30 m high pressure hose The images contain additional options. Shipping possible. Errors and prior sale excepted. We refer to our terms and conditions.

New industry-standard hotbox for up to 400 bar and up to 28 litres per minute. EQUIPMENT - Epoxy coated steel frame with stainless steel cover - 4-wheel chassis with solid rubber tyres - Connection hose 1,5m - Water inlet temperature max. 60° - Heating capacity approx. 90 kW - Water outlet temperature in the steam range up to max. 140°C - With thermal switch and flow monitor Diesel tank: 20L Power supply: 1x 230V Dimensions: (L x W x H): 700mm x 570mm x 800mm Weight: 65kg Shipping possible. Errors and prior sale excepted. We refer to our terms and conditions.

New industry-standard hotbox for up to 300 bar and up to 28 litres per minute. EQUIPMENT - Epoxy coated steel frame with stainless steel cover - 4-wheel chassis with solid rubber tyres - Connection hose 1,5m - Water inlet temperature max. 60° - Heating capacity approx. 90 kW - Water outlet temperature in the steam range up to max. 140°C - With thermal switch and flow monitor Diesel tank: 20L Power supply: 1x 230V Dimensions: (L x W x H): 700mm x 570mm x 800mm Weight: 65kg Shipping possible. Errors and prior sale excepted. We refer to our terms and conditions.

New hotbox in the industry standard for max. 200 bar and up to 28 liters per minute. EQUIPMENT - Epoxy coated steel frame with stainless steel cover - 4-wheel chassis with solid rubber tyres - Connection hose 1,5m - Water inlet temperature max. 60° - Heating capacity approx. 90 kW - Water outlet temperature in the steam range up to max. 140°C - With thermal switch and flow monitor Diesel tank: 20L Power supply: 1x 230V Dimensions: (L x W x H): 700mm x 570mm x 800mm Weight: 65kg Shipping possible. Errors and prior sale excepted. We refer to our terms and conditions.

Offer here various spare parts from a SIG Blomax 20 Series 3 yoc. 2006. 220. Transport mandrels z. Teil neu. Conversion kit to PCO 1881. Mother moulds, Kpl. blowing stations. Heating box etc. see also pictures

I sell an Angular drill with hanging insert suitable for tur production. MARZANI MACCHINE CHEAP WORK Year of construction: 1993 Number of drilling spindle 1 (drill head fully -7 to +90° adjustable) Number of insert heads 1 (magazine suitable for turret hanging) Insert head mechanical, screw insert Very good condition. Available the same.

Gear motor, electric motor, electric gear motor -Manufacturer: DEMAG, gearbox type CM63 / GS -Speed: 21 rpm -Shaft: Ø 28 x 30 mm -Motor: Kobold type KGC 608.28 0.5 kW -Voltage: 220V -Protection class: IP20 -Dimensions: 490/160 / H200 mm -Weight: 25 kg

COLCHESTER MASTIFF V/S 1800 universal lathe was built in Great Britain in 1998. The machine allows machining a workpiece with a maximum length of 2000 mm and a diameter of 560 mm (above the bed) or 370 mm (above the support). The 11 kW spindle of the lathe with reading rotates at 1800 rpm. The lathe is equipped with a MITSUBISHI Freqrol A200 inverter and a SONY LH52 digital display. Total weight of the machine is 3250 kg. Technical data of the lathe COLCHESTER MASTIFF V/S 1800 - turning length: 2000 mm - turning diameter above the bed: 560 mm - turning diameter over support: 370 mm - inverter: MITSUBISHI Freqrol A200 - digital display: SONY LH52 - spindle speed: 1800 rpm - spindle bore diameter: 90 mm - spindle power: 11 kW - MASTIFF VS 1800 machine dimensions: (L x W x H): 3750 x 1700 x 2100 mm - total weight: 3250 kg

We can offer you a complete line of Breathable menbrance extrusion line,manufactured by Colines,Italy in 2009,the line has just installed and adjusted,never used for production,like new line.the products-- breathable menbrance is for making diaper and hygienic materials.the net web width is 2850 mm,2 extruders,a 90 mm and a 150 mm,,serious buyer contact us,please Please visit manufacturer's website: .colines.it to learn more about this line.

wire electrode, welding wire, welding wire -Manufacturer: Elga, started roll of inert gas wire electrode -Type: Cromacore DW-309L O1.2mm -Dimension: O 300 /105 mm -Weight roll: 5 kg

Pressure monitor, pressure switch, pressure limiter, gas pressure switch -Manufacturer: Honeywell, gas pressure switch unused, Ovp -Type: C6097A2310D -Control range: 30-150 mbar -P max.: 500 mbar -Number: 19x switches available -Price: per piece -Dimension box: 110/95/H95 mm -Weight 0.3 kg/piece

Pressure monitor, pressure switch, pressure limiter, gas pressure switch -Honeywell type: C6097A2410D -Control range: 100-500 mbar -P max.: 600 mbar -Pressure switch: 5 A-250 V -Protection class: IP54 -Price: per piece -Number: 23 pieces -Dimensions: 110/95/H95 mm -Weight: 0.3 kg/piece

Hello all, We have in our stock in Istanbul Turkey 3 Wartsila W32 Cylinder head covers in almost brand new condition (slightly used) Standart exhaust seat bores, No cracks or wielding Water pressure tested With reports available Please contact us at info@fin-marine.com Regards

Measurement data acquisition device, test device, telemetry system -Axon: J1-CS10 Torque Telemeter -Dimensions: 205/60/H110 mm -Weight: 0.8 kg

Pressure monitor, pressure switch, pressure limiter, gas pressure switch -Honeywell type: C6097A2110D -Control range: 1.0-10 mbar -P max.: 200 mbar -Pressure switch: 5 A-250 V -Protection class: IP54 -Price: per piece -Number: 25 pieces -Dimensions: 110/95/H95 mm -Weight: 0.3 kg/piece

Industrial vacuum cleaners, vacuum cleaners, industrial vacuums, floor vacuums, safety industrial vacuums, filter bags, dust bags -Manufacturer: cfm, Antistatic safe bag system -Type: 8 40874 -Number: 17 dust bags included -Price: per piece -Packaged dimensions: 170/210/H80 mm -Weight: 0.2 kg/piece

PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, isolating amplifier -Manufacturer: Phoenix Contact, Conf. Isolation Amplifier -Type: MCR-FL-C-UI-UI-B-DCI-24/230 -Number: 11x relays available -Price: per piece -Dimensions: 100/15/H115 mm -Weight: 0.1 kg/piece

Make CMC Model Q-Joint Year 1995? Working width 500 mm Thickness up to 80 mm Details Foot pedal operated

Industrial Ethernet Switch, Netzwerk Switch, Lan- Switch, Rail Switch, Router, Ethernet Security Router -Cisco: 1812/K9 V07 Ethernet Security Router -Dimension: 240/325H45 mm -Weight: 2,4 kg

Fixators, leveling units, leveling elements, machine feet, leveling shoes, vibration dampers, spring elements -Manufacturer: Stop Choc, vibration dampers, 6 pieces, for machine tools and equipment -Type: Ø 129 mm -Installation height: 27 mm -Price/Sale: complete -Total weight: 9 kg

SPECIFICATIONS: Vertical frame press for windows and doors Hydraulic operation machining length mm: 3,000 machining height mm: 2,000 Installed capacity KW: 1.6 Beam 2 horizontal bars 3 Vertical bars with pusher

PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, isolating amplifier -Manufacturer: Phoenix Contact, Conf. Isolation Amplifier -Type: MCR-FL-C-UI-UI-DCI-24/230 -Number: 2x relays available -Price: per piece -Dimensions: 100/15/H115 mm -Weight: 0.1 kg/piece

PTC relays, contactors, semiconductor contactors, relays, isolation amplifiers, temperature transducers -Manufacturer: Phoenix Contact, PT100 temperature monitor -Type: MCR-SL-PT100-SP -Price: per piece -Quantity: 7 pieces -Dimensions: 100/13/H115 mm -Weight: 0.1 kg/piece

Copy lathe Manufacturer: Hempel Model: CKS-12 For the production of moulded turned parts in small series Without the use of moulded steels Scanning via sheet metal template or wooden model Turning length max.: 1200mm Rotary diameter max.: 250 mm Spindle motor: 5.5 KW Hydraulic motor: 2.2 KW

Balancing valve, shut-off valve, ball valve, ball valve -Manufacturer: Castel, ball valve, unused, original packaging -Type: 6590/M12 -Connections: 12 mm ODS -Cardboard dimensions: 130/85/H40 mm -Weight: 0.3 kg.

y-Radiator Caterpillar, Part number: 9Y-6675 For engine 3512. Revisado.

Frount group box, for engine 3412 Part number: 1729315

Caterpillar injection pump, for engine 3400 12 valves.

Caterpillar piston + segment ring, for engine 3412 Part number: 137L12A3

Filter PDx 40 Part number: 2901086400

Miwe Condo CO 4.0806 2D Stone Slabs Oven Electric -Shared oven with 4 floors and proofing cabinet -Manufacturer : Miwe -Model: Condo CO 4.0806 2D -with 4 floors each 80x60cm -with Miwe FP8 control -Floor entrance height 13cm -with proofing cabinet -with exhaust air hood and vapour condenser -Year of construction 2012 -18.9 kW -400 Volt 50Hz Outer dimensions approx.: 110x 115cm and 210cm high