c wrap label used for sale

Repair and Exchange service Repair and replacement service SERVICE MAZAK MITSUBISHI NETZTEIL POWER SUPPLY MDS-C1-CVE-260 – Repair price depending on the effort. Max. 1400 – € Through our Mazak machine simulators, we are able to test almost ALL Mazak Mitsubishi power supplies under load. Long-term tests are also possible. We repair your Mazak Mitsubishi power supply at a flat rate or at cost. The amount of work is about 1-3 days. Urgent repairs are also possible. The warranty on the repair is 6 months. Repairing other power supplies on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Repair and Exchange service Repair and replacement service SERVICE MAZAK MITSUBISHI NETZTEIL POWER SUPPLY MDS-C1-CVE-300 – Repair price depending on the effort. Max. 1400 – € Through our Mazak machine simulators, we are able to test almost ALL Mazak Mitsubishi power supplies under load. Long-term tests are also possible. We repair your Mazak Mitsubishi power supply at a flat rate or at cost. The amount of work is about 1-3 days. Urgent repairs are also possible. The warranty on the repair is 6 months. Repairing other power supplies on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Qty 1 x Carter MK3+ Banbury internal mixer,  chamber volume 90L,  batch weight approx 85kg,  2 wing tangential rotors,  drilled sides, roller bearings,  hydraulic drop door with linear actuator and spade latch.  F type dust seals.  With 325kw, 1070rpm, 715A, DC variable speed motor and controls.  Pneumatic hopper.  Complete with hydraulic unit, lubrication unit etc and in good condition (previously used for mixing coloured compounds). 

Repair and Exchange service Repair and replacement service SERVICE MAZAK MITSUBISHI NETZTEIL POWER SUPPLY MDS-C1-CVE-370 – Repair price depending on the effort. Max. 1400 – € Through our Mazak machine simulators, we are able to test almost ALL Mazak Mitsubishi power supplies under load. Long-term tests are also possible. We repair your Mazak Mitsubishi power supply at a flat rate or at cost. The amount of work is about 1-3 days. Urgent repairs are also possible. The warranty on the repair is 6 months. Repairing other power supplies on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

6 x 50/105, right, Ø13 mm 6 x 50/105, left, Ø13 mm 8 x 60/115, right, Ø13 mm 10 x 70/125, left, Ø13 mm

IMMEDIATELY AVAILABLE - video link on request KA 550 CNC-DRILL CNC-controlled 3-axis sawing and drilling center for sophisticated production technology Encapsulated, compact machine - designed as a closed production island - no noise and no chips in the machine environment - large extraction connection for efficient chip extraction. (The machine is also supplied as a two-axis sawing center without drilling unit). Dimensionally accurate 90° saw cuts both in small series and in large series production. CNC control based on Windows® with touch screen and color screen, simple menu-driven programming with symbols, remote maintenance module. Absolutely burr-free precision sawing of all materials such as - various plastics such as PVC and polyamide - GRP (glass fibre reinforced plastics) - aluminium - bronze - wood - copper - brass and . Drilling (through holes and blin ...

IMMEDIATELY AVAILABLE - video link on request CNC-controlled 3-axis sawing and drilling center for sophisticated production technology Encapsulated, compact machine - designed as a closed production island - no noise and no chips in the machine environment - large extraction connection for efficient chip extraction. (The machine is also supplied as a two-axis sawing center without drilling unit). Dimensionally accurate 90° saw cuts both in small series and in large series production. CNC control based on Windows® with touch screen and color screen, simple menu-driven programming with symbols, remote maintenance module. Absolutely burr-free precision sawing of all materials such as - aluminum - bronze - GRP (glass fiber reinforced plastics) - wood - copper - brass and various plastics such as PVC and polyamide. Drilling (through holes and blind holes – step drills  ...

Tribloc (rinser-filler-capper), pressure filler, isobaric, with vacuum pump pre-evacuation, manufacturer: Cimec Italy, type AM DPS 12-12-1, 12 rinsing nozzles, 12 filling valves, 1 head crown corker, year of construction: 2013, with height adjustment, approx. 1,500 operating hours, set to current bottle diameters 67 mm and 85 mm. Tribloc (Rinser-Filler-Crowner), counter pressure, isobaric, with vacuum pump, pre-evacuation, Made by: Cimec Italy, Type: AM DPS 12-12-1, 12 head rinser nozzles , 12 filling valves, 1 head crown corker, Year: 2013, with hight adjustment, total operating hours approx. 1.500 hours, adjusted to bottle diameter 67 mm and 85 mm.

CAT 3608 Generator Sets 2500kW 60Hz 360HR (2 sets) These generating sets had been used as emergency stand-by generators for a famous amusement park in Korea. Therefore, the operating time is less than 360 hours, and the generating sets had been well maintained. They have now been dismantled and stored at our factory since they were decommissioned in 2021, so they can be inspected and delivered at the customer’s convenient time. Main Specifications: - Engine Model: CAT 3608 x 2 sets - Maker: Caterpillar - Continuous Output: 2,500kWe x 900 rpm - Frequency & Voltage: 60Hz & 6,600V - Year of Production: 1987 - Fuel Oil: Diesel Oil - Running Hours: 335 & 354 hours

Manufacturer / Origin: Bacher / Germany (EU)

U5 Lab Package For Pilot & Development Construction: 305 stainless steel with 316L stainless steel product contact parts. Surface Finish: Product contact surfaces mirror polished (Ra 0.10 micron), non-contact surfaces 150 grit (Ra 1.06 micron); welds cleaned and polished and all material contact welds ground flush and polished. Infeed Opening: 3.25" (83 mm) diameter with grid bars to prevent operator access to the rotating impeller. Infeed Chute: Hand-fed funnel, 6.4" diameter x 5" high (163 mm x 127 mm) with magnetic actuated safety interlock. Spindle Assembly: Sanitary pharmaceutical duty with pre-lubricated, sealed bearings, viton O-ring, two shaft seals, and double varilip seal in a stainless casing. Also suitable for use with vacuum. Impeller Speed: Approximately 1000 - 6500 RPM. Capacities: Varies based on tooling, feed and speed used. Discharge: 6" (152mm) tri-clamp di ...

Worm gearbox with motor - FLENDER CEUA320 - see pictures

Towing radial, Mk 4, universally adjustable

Spindle cone MK 4 Machine weight approx. 2.5 t Space requirements approx. 2.2 x 0.7 x 2.5 m

14-speed mounting screwdriver AC, for cylinder head mounting etc. Next: 3 spindle assembly screwdriver AC 3 and 6-spindle screwdriver ATLAS-COPCO 2 spindle screwdriver AC 3 spindle assembly screwdriver SPS & AC 1 spindle assembly screwdriver SPS

Endmass Cary 1, Frank 0, Frank 1, Sel gr. 0, Sel gr. 1

NILPETER MO4 - 6 colours offset label press + 4 flexo NILPETER MO4 6 COLOURS OFFSET AND 2 COL. FLEXO PRINTING UNITS LABEL PRESS WITH SLEEVE SYSTEM  Age: 2014  Unwind  Rewind  Corona treatment  2 Flexo printing units  6 offset printing units  Sleeve system for offset units  2 Flexo printing units  Cold foil application  Lamination  Web cleaning  GEW UV curin  Delam Relam unit Kocher & Beck Automatic unwinder and roll changer (Butt splicer) Kocher & Beck Automatic rewinder and roll changer (Butt splicer)  Kocher & Beck Automatic Waste Rewinder with turret  Chilled rollers for printing on film  Rotary Die Cutter with Kocher & Beck GapMaster  Slitting unit  Backside printing  Perforation cross: YES in the die cutter  Perforation lengthwise: YES in the die cutter  Screen printing 1C, then 6c offset  ...

CHRONOS gross bagging scale 25 kg. Weighs up to 50 kg. 2 x 10 kg weights. The Machine is working very accurate.

1. HEAT CLEANING OVEN Cycle time : 2 - 4 hours Loading : Trolley, manual loading from the door side INTERNAL USEFUL DIMENSIONS Length : 1.870 mm Width : 1.460 mm Height : 1.500 mm (gross) 1.000 mm (net) Interior volume : 4,1 m³ Insulation : Ceramic wool + Rock wool Insulation thickness : 175 mm Maximum temperature : 1.260˚C Heating type : Direct heated Heating source : Natural Gas, LPG or Diesel Combustion chambers : 2 sets Burner capacity : 2 x 350.000 kcal/h Burner : RIELLO (Italy) Overheating control : Stainless steel water spray nozzles – 2 pc Safety control : Stainless steel water spray nozzles –4 pc Oven safety door : 1 set Electrical panel : PLC controlled, Schneider Electric branded switchgear components Control system : Touch screened panel and software system MATERIAL Oven body : Structural steel and sheet metal, spray pa ...

Technical data: Anti vibration welded steel construction Continuous Kettennantrieb 86 mm wide, chain parts made of steel and plastic, self-lubricating bearings, shift on prismatic Guide Adjustable belt speed 5-25 m / min Minimum height work table 870 mm (adjustable) The top pressure unit with adjustable Ã? rubber wheels 60 mm ball bearing Lateral pressure unit with rubber wheels Ã? 40 mm ball bearing Working height min / max 10/100 mm Minimum length 50 mm Minimum width of 30 mm The maximum width 200 mm Feed motor power 3 kW 1 milling unit kW / 2,4 2800 RPM 4 grinding machines with oscillating engines of Leistunj per 4 x 1.7 kW 2800ot RPM Total power consumption 12.5 kW Maschinenewicht 3000 kg very good Zistand, factory tested CE

Honda diesel engine GRA 3-cyl. water-cooled, 1061 CC displacement, 15 kw / 20 HP / 3,000 1/min, engine with starter and alternator.

DEAR'S SALE, CAT 3412 GENERATOR BUILT 2001 500 KVA 60 Hz GOOD CONDITION Brgds Hakan KUSCU info@kscege.com

DERA'S SALE, RUSKI CHN 36/45 ENGINE 6CYL CRANKSAFT, LINER, PISTON, COVER, BLOCK, PUMP ANY PARTS Brgds Hakan KUSCU +905323642509 info@kscege

MPS EF330 Servo Flexographic Label Press  Age: 2004  Automatic register control  Web width: 330mm  Servo unwind  BST Electronic web guide  Vacuum web cleaner  8 x Servo Driven Flexo Print Stations  8 x UV dryers  8 x water cooled chill rolls  2 x Rotary Die Stations  Waste Rewind  Edge Slitting Unit  Rewind  BST camera system To include: Magnetics: 80z, 96z, 100z, 104z, 108z, 116z, 124z Print tooling: 7 x 80z, 5 x 96z, 1 x 104z, 6 x 108z, 7 x 116z, 7 x 124z Anilox x 8 Technical- and optical condition: Technical: 8/10 (checked and in excellent running condition) Optical: 8/10 (cleaned and can go to end-user directly) -Online Video Inspection by WhatsApp Video-

Charge air cooler for Wichmann 12V28 Part no: 530302 Vestas type CB32 Can be sold "as is" or overhauled, ready to fit.

GALLUS EM 510 S – 5 colour UV-FLEXO Machine information: The Gallus 510 S can be used to produce self-adhesive and monofoil labels as well as a wide range of other products. A state-of-the-art servo-driven web-feed system ensures optimum cost-effectiveness and superb quality results. Combined with the unique platform concept and the consistent modular design, these machines are a secure investment in your success – both now and in the future. Specifications:  Brand / type: GALLUS / 510S /Servo driven – like new  Age : 2008 – like new  Counter : Only 9.424 hour/runs  Webwidth : 510mm  5 x Flexo Units  5 x U-Dryer  BST Power Scope 300 (Web monitoring system)  Unwinder max.: 1250mm  Rewinder max.: 1250mm  Lamination/Cold foil  Turnable  Remailing 24"  Ben Bunch 500  Cross Cutting Cylinder  punching units (lengt ...

ORDER NUMBER 7213 TECHNICAL DATA - max cutting height 180mm - track width 400mm - shaft width 370mm - shaft diameter 60mm C9znbyq - max disc diameter 300mm - disc bore diameter 80mm - min element length 630mm - max element width 600mm in advance: - pneumatic clamp -Triggers - pressure shaft, metal 2 pcs -Triggers - shaft with saws - pressure roller, smooth -Triggers - pressure roller, smooth From below: - metal shaft, pulling, toothed 2 pcs -Triggers -caterpillar - shaft with saws -caterpillar - infinitely variable feed speed control on the inverter - main engines 2x55kW - 4kW feed motor - hydraulic lifting of the body up/down - hydraulic adjustment of shafts with saws - pump motor 0.37kW - Central lubrication - diameter of the extraction spigot 1x300mm, 1x380mm - dimensions length/width/height 3200x2350x2000mm - weight about 5500kg ADVANTAGES � ...

Semico screw pump +booster Manufacturer: Busch Type: Cobra DS1000E Status: good condition, last factory overhaul at Busch 6 months ago! Performance: without delivery time: ex stock

Semico screw pump + booster Manufacturer: Busch Type: Cobra DS1000E Status: good condition, last factory overhaul for Bush months ago! Warranty: without Delivery time: In stock

MULTI RIP SAW type CML SCA 320 with rip trimming unit with two circular blades with adjustable interaxle ( one moving saw ) Technical Details : carpet width mm. 320 max. cutting heigth mm. 120 minimum length of pieces mm. 300 blades diameter : min.mm.250 / max.mm.350 maximum distance between two external blades mm. 320 feeding speed mt/min. 0 / 36 motor power Hp 40 net weigth kgs. 2000 volt. 380/50

all stainless steel belt width 900 mm mobile adjustable speed dimensions (l x w x h) : ± 900 x 1.580 x 2.030 mm capacity : 380V, 50Hz, 5.62kW weight : 885 kg

mobile belt width 400 mm adjustable speed with press roller capacity : 3,95 kW with air knife dimensions (l x w x h) : ± 3.700 x 900 x 1.700 mm

Robots industrial robots KUKA KR200-2 comp Built in 2007 Reach 2400mm Weight 1267kg Load 200kg Control KRC2ed05 Weight 185kg Processor 2 GHz WinXP language Software version V5. 6.6 Teachpendant KUKA KCP2ed05 Connection cables 7 m / 15 m (several Creative Commons, orange)