We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,440 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Air screw compressor Atlas Copco ZR 450, oil-free 450 kW, 7.5 bar, 75.30 m3/min water-cooled
used
Rotary screw air compressor Atlas Copco ZR 450, oil-free 7,5 bar, 75,30 m3/min water cooled
used
Compressed air screw compressor oil-free Atlas Copco ZT 90 90 kW, 7.5 bar, 14 m3/min.
used
Rotary screw air compressor Atlas Copco ZT 90 oil-free 90 kW, 7,5 bar, 14 m3/min.
used
BHKW in container with Cummins diesel engine Lorey Somer generator 250KVA 1500U / min 50 hertz Storm Steuerung, arrangement is equipped with emergency cooler zusaetzl. regularly waited to zeit 21000 company hours. arrangement is operational and available immediately. for other questions I stand to them to verfuegung under 01727265324
new
Band conveyor 14 cm wide - 2.00 m long use as a stack table behind filling arrangements possibly nevertheless, height of the stack level (normally 0.75m) is changeable on 0.95 m. the band conveyor can be put about a Poti in the speed.
used
Compressed air refrigeration dryer Atlas Copco FD 1000 VSD A 13 bar, 60 m3/min. Frequency controlled, volume flow 0-60 m3/min.
used
Compressed air refrigerant dryer Atlas Copco FD 1000 VSD A 13 bar, 60 m3/min. Variable speed drive. Volume flow 0-60 m3/min.
used
Compressed air refrigeration dryer Atlas Copco FD 1250 VSD A 13 bar, 75 m3/min. Frequency controlled, volume flow 0-75 m3/min.
used
Compressed air refrigerant dryer Atlas Copco FD 1250 VSD A 13 bar, 75 m3/min. Variable speed drive. Volume flow 0-75 m3/min.
used
Compressed air screw compressor, Atlas Copco, GR 1520 200 kW, 20 bar, 19.60 m3/min. including external air cooler
used
Rotary screw air compressor Atlas Copco 200 kw, 20 bar, 19,60 m3/min. inclusive external air cooler
used
Compressed air screw compressor oil-free Atlas Copco ZT 145 160 kW, 10 bar, 19.20 m3/min. oil-free, air-cooled
used
Rotary screw air compressor oil-free Atlas Copco ZT 145 160 kW, 10 bar, 19,20 m3/min. oil free, air cooled
used
Air Screw Compressor Atlas Copco GA 110 FF 110 kW, 7.50 bar, 19.98 m3/min. with integrated compressed air refrigeration dryer
used
Rotary screw air compressor Atlas Copco GA 110 FF 110 kW, 7,50 bar, 19,98 m3/min. with built-in compressed air refrigerant dryer
used
Air Screw Compressor Atlas Copco GA 30 FF 30 kW, 12.80 bar, 3.90 m3/min. with integrated compressed air refrigeration dryer
used
Rotary screw air compressor Atlas Copco GA 30 + FF 30 kW, 12,80 bar, 3,90 m3/min. with built-in compressed air refrigerant dryer
used
Air Screw Compressor Atlas Copco GA 90 FF 90 kW, 9.80 bar, 14.11 m3/min with built-in compressed air refrigerant dryer
used
Rotary screw air compressor Atlas Copco GA 90 FF 90 kW, 9.80 bar, 14.11 m3/min with built-in compressed air refrigerant dryer
used
Rotary screw air compressor Atlas Copco GR 110 FF 110 kW, 19.75 bar, 12.60 m3/min with built-in compressed air refrigerant dryer
used
Air Screw Compressor Atlas Copco GR 110 FF 110 kW, 19.75 bar, 12.60 m3/min. with built-in compressed air refrigerant dryer
used
Compressed air screw compressor oil-free Atlas Copco ZR 315 315 kW, 7.5 bar, 51.20 m3/min water-cooled
used
Rotary screw air compressor Atlas Copco ZR 315 oil-free 315 kW, 7,5 bar, 51,20 m3/min. water cooled
used
ROUTER type COSMEC 1000 second hand machine volt. 380 / 50 max. working mm. 1000
used
Compressed air screw compressor oil-free Atlas Copco ZR 425 450 kW, 7.5 bar, 69.70 m3/min. oil-free, water-cooled
used
Rotary screw air compressor Atlas Copco ZR 425 oil-free 450 kW, 7,5 bar, 69,70 m3/min. Oil free, water cooled
used
Air Screw Compressor Atlas Copco GA 132 VSD FF 132 kW, 9.8 bar, 26.10 m3/min. Frequency controlled with integrated compressed air refrigeration dryer, volume flow 5.5 - 26.1 m3/min.
used
Rotary screw air compressor Atlas Copco GA 132 VSD FF 132 kW, 9,80 bar, 26,10 m3/min. Variable speed drive. With built-in compressed air refrigerant dryer. Volume flow 5,6 - 26,1 m3/min.
used
Air Screw Compressor Atlas Copco GA 180 VSD 180 kW, 12.50 bar, 28.90 m3/min. Frequency controlled, volume flow 5 - 28.9 m3/min.
used
Rotary screw air compressor Atlas Copco GA 180 VSD 180 kW, 12,50 bar, 28,90 m3/min. Variable speed drive. Volume flow 5 - 28,9 m3/min.
used
Carrier Turbo Cold Water Kit, 19XR5251467, Y.O.M. 2800KW cooling capacity, from 20%-100% adjustable, latest model, very efficient, very good condition, ready to use immediately.
used
Cardboard dimensions L min/max 200/650 mm W min/max 150/450 mm, H min/max 120/500 mm Working height 680 mm, format to be adjusted via hand crank, Folding the 4 floor flaps pneumatic operation 6 bar air Power 5-7 cycles /min - product-dependent
used
Air Screw Compressor Atlas Copco ZR 90 VSD FF 90 kW, 8.75 bar, 15.50 m3/min. Frequency controlled with integrated adsorption dryer, volume flow 4.7 - 15.5 m3/min.
used
Rotary screw air compressor Atlas Copco ZR 90 VSD FF oil-free 90 kW, 8.75 bar, 15.50 m3/min. with built-in compressed air adsorptions dryer. variable speed drive.
used
Air Screw Compressor Atlas Copco GR 200 200 kW, 20 bar, 23.10 m3/min.
used
Rotary screw air compressor Atlas Copco GR 200 200 kW, 20 bar, 23.10 m3/min.
used
Air screw compressor Atlas Copco ZR 145 FF oil-free 145 kW, 10 bar, 20 m3/min. oil-free, water-cooled, with integrated adsorption dryer.
used
used
Rotary screw air compressor Atlas Copco ZR 145 FF 145 kW, 10 bar, 20 m3/min. Oil free, water cooled. With built-in compressed air adsorption dryer.
used
Pierce control automation RUR 2500 P Work area: 2.1 m x 6.1 m Control: Burny 10 LCD Fully welded Portal construction without bolted connections o LM Guide in the transverse axis o AC servo-motors (12 000 mm / min.) o Digital synchronization on the longitudinal axis o CNC control system BURNY 10 LCD Plus with touch screen o Membrane keyboard o 'Flying' bearing inserts o Automatic initial setting of the plasma torch o Voltage monitoring of plasma torch height o 1 burner parking outside the cutting area o Circuit breaker at the end of all axes 1 x plasma Kjellberg 160i with manual gas console Cut quality cutting up to 25 mm Optional autogen retrofittable Completely Factory reconditioned machine Installation and commissioning on request
used
Air screw compressor Atlas Copco ZR 250 oil-free 250 kW, 10 bar, 37.6 m3 rpm. water-cooled
used
Rotary screw air compressor Atlas Copco ZR 250 oil-free 250 kW, 10 bar, 37,6 m3/min. water cooled
used
Rotary screw air compressor Atlas Copco ZR 250 oil-free 250 kW, 10 bar, 37,60 m3/min. water cooled
used
Air screw compressor Atlas Copco ZR 250 oil-free 250 kW, 10 bar, 37.60 m3/min. water-cooled
used
Compressed air screw compressor oil-free Atlas Copco ZR 250 250 kW, 7.5 bar, 43.40 m3/min. oil-free, water-cooled
used
Rotary screw air compressor Atlas Copco ZR 250 oil-free 250 kW, 7.5 bar, 43.40 m3/min. water cooled
used
Oil-free. Water cooled. 8.6 bar
used
Cortina DS 3100, working range: 8,000 x 2,000 mm, year of construction Dec. 2004 CNC-controlled cutting machine with robust bridge suspension, form-fitting longitudinal drives and precisely machined guide profiles, Connection voltage: 400 V 50 Hz, TN-S mains (A/PE/N) track width: 3100 mm working width: 2000 mm dead length: 1500 mm Total width: 3525 mm Operating side: left power supply: right fuel gas: propane incl.: OmniCom Explorer C drive 15 m/min DC dual-sided Longitudinal drive on rail feet machine cutting torch ALFA (with internal ignition) OmniFlow automotive supply (gas quantity control up to 6 burners) OmniFlow Control torch suspension OmniLift 200 SensoMat ALFA SensoMat ARC/SR Plasma SetControl, tactile first height detection interlock for a maximum of 2 systems HT 4400 HySpeed fine beam plasma cutting system cutting up to 50mm energy supply via energy chain (autogen/plasma) cu ...
used
Cortina DS 3100, working range: 8,000 x 2,000 mm, built in Dec. 2004 CNC controlled cutting machine with sturdy bridge suspension, interlocking longitudinal drives and precise machined leadership profiles, supply voltage: 400 V 50 Hz, TN-S Network (§ / PE/N) Track width: 3100 mm Working width: 2000 mm Dead length: 1500 mm Total width: 3525 mm Operating side: left Power supply: right Fuel: Propane Including: OmniCom Explorer C drive 15 m / min DC Carrier for double-sided longitudinal drive on Schienenfüßen Machine cutting torch ALFA (with internal ignition) OmniFlow autogen supply (gas volume control up to 6 burner) OmniFlow control Burner suspension OmniLift 200 SensoMat ALFA SensoMat ARC/SR Plasma SetControl, tactile initial height determination Interlock for maximum of 2 plants HT 4400 HySpeed fine beam plasma cutting system Cutting up to 50mm power supply thro ...