c wrap label used for sale

Koppelbox für Falzmaschinen - Coupling Box for Folding Machines Heidelberg Coupling box I. Year 2003 - Serial-No. 848-300

Koppelbox nach Navigator - Couple Box after Navigator MBO Couple Box Year 2001 - Serial-No. XX174 Cuple Box after Navigator to connect to MBO units

weight max.: 1,6 t stroke: . mm clamping width: . mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A machining center is available. Travel X/Y/Z: 550mm/400mm/425mm, A-axis: +/-100°, rapid traverse: 40m/min, speed: 10500rpm, tool positions: 20, tool holder: SK40, table load: 300kg, control: Siemens Sinumerik. The screen of the machine is defective. Documentation available. On-site inspection is possible.

Concrete Mixing Plant 1: Manufacturer: ELBA- Model: Supermobil ESM 60 Year of Manufacture: 1998 Status: Decommissioned Technical Specifications: - Rated Output: Approx. 30 m³/h - Dosing Unit: - Loaded by wheel loader - Total capacity: 180 m³ - Four chambers: 4 × 45 m³ (25t each) - Binder Storage: - 3 vertical silos - Each silo approx. 66 m³ (80t) at a density of 1.2 t/m³ - Dosing System: - Aggregates: via weighbelt, 2500 kg - Binder: via container scale, 500 kg - Water: via container scale, 500 kg - Additives: - Two-chamber liquid additive scale, 2 × 12.5 liters, 25 kg total - Mixing Equipment: - 1 EMS 1000C single-shaft compulsory mixer - Concrete discharge: 1,000 liters - Discharge Height: - For truck mixer and truck loading: 4.00 m - Control System: - Fully automatic with computer - Operator container included - Electrical supply: 400 V, 50 Hz, 3-phase, 104 A fuse Concre ...

Manufacturer: Bacci Model: MASTER/CUT Year of Manufacture: 2012 Voltage (Volts): 380 V Frequency (Hz): 50 Hz Power (Kw): 24 kW Weight (Kg): 6000 kg Find more here - / Contact us at -

Manufacturer: MITSUBISHI Model: Laser Cutting Machine Year of Manufacture: 2017 3000×1500 mm Power: 2.7kw Technology: Co2 2 changing tables AVAILABLE: immediately Find more here - / Contact us at -

• Suppository production line for prefabricated plastic cast packaging • Working direction from right to left • Output max. 10,500 suppositories/h • Material of cast packaging PVC/PE, PS/PE, PVC/PVDC/PE • Dimensions of pouring packages: Container spacing 17.3 mm (pitch), container height 44-51 mm depending on format tools, standard version. • Casting packaging Roll material printed and unprinted, roll diam. 500 mm, pick-up diam. min. 100 mm • Available format parts for container heights 44 mm (1.1 g) and 51 mm (2 g) • Polystar 100 GE film sealing device for sealing the film ends • Contactor control • Drive 400V/50Hz Line consisting of: Filling machine Citopac SFD-10 CP • 2 filling stations, distance 17,3 mm • -osing range per filling point 0.5-3.5 ml • Dosing via heatable intermediate container 0.3 l and heatable tap head with rotary slide control (3 each a ...

Height from floor to lifting hook: 5 meter Horizontal movement of hoist: 6 meter Kind of: jib crane Capacity: 1500 kg

Age 1995, For sale outside Europe, Automatic Elevator Tray-feeder, Auto-cross conveyor feeder to main Print Unit, Universal screw Denester, ARCOTEC CG30-2 Corona Pretreatment System, 8-mandrel Indexing Turret, with Mandrel Holders for Tubs, 6 x individually hinged dry-offset Print Heads., Each Print Head consisting of Print cylinder, radial and axial Print adjustment with micro-register during operation of the Printer, 2 x Form Rubber Rollers dia. 71 and 100 mm, 2 x Oscillating rollers, 2 x Idler Rollers, 1 x Ink Transfer roller (Ductor Roller), 1 x Ink Fountain, Ink Washing System on Print Heads, Positive Suction-cup pick & place and Take-off, 2 x Color Base Printer, 6 kW Jumbo UVITERNO UV Curing Tunnel, Counter/ Stacker station, Max. Container dimension 135 x 180 mm, Max. Printing Length 417 mm, Max. Height of Containers 125 mm, Min. height of Containers 30 mm, Max. speed 9000 containe ...

Wohlenberg 155 CUT-TEC Reference No.: CU-001414 cutting-Line 2000 width 155 cm with monitor programmable air table side air table Baumann Jogger BSB 6L Baumann Unloader BA 6N complete line regular service in production available: 08/25 located: Germany

Semi-automatic cut-off machine CURSAL mod. TRV 500 – CE compliant - Version with movable pressure - Feed from right to left - Rug GRT 6000x400 - N. 3 unloading benches 1000x1200 - Rejector mod. SIVARON SS-80 - Waste discharge belt tss 45° mm. 2500 - Matr. 972842 - Year 1997 - Complete with CE declaration and manual

Turning diameter over bed/cross slide: 500mm/280mm, max. workpiece length: 1500mm, travel X/Z: 280mm/1430mm, spindle bore: 82mm, speed: 2200rpm, rapid traverse X/Z: 6m/10m/min, quill diameter: 75mm, quill stroke: 150mm, bed width: 400mm, chuck diameter: 250mm. Machine dimensions X/Y/Z: approx. 3350mm/1750mm/1650mm, weight: approx. 2700kg, control: Fanuc Series 0i Mate-TC. Documentation available. On-site inspection is possible.

x-travel: 610 mm y-travel: 455 mm z-travel: 520 mm weight of the machine ca.: 3,2 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Copy cutter Helma Type: CF 40 Machine No. 7825 Table dimensions 700 x 1120 mm Diameter of the 2 working spindles 30 mm Working spindle speed 10500 rpm max. milling height 100 mm Vertical adjustment of the cutter heads or milling cutters for profile correction 10 mm max. distance between the spindles from center to center 450 mm Distance between feed shafts from center to center 235 mm Spindle motors 2 x 5.5 kW Feed motor 0.37 kW Feed speeds 1.8 – 10 m/min. infinitely variable Air consumption max. 20 l/min. Net weight of the machine 900 kg

Inv. Num. : 8514 Type: CLX 450 TC Producer: DMG Created: 2022 Parameters: Switch-on hours: 13312 h Hours: 8547 h Maximum spindle speed: 5000 1/min X-axis travel: 750 mm Y-axis travel: 200 mm Travel Z axis: 1000 mm Max. workpiece diameter: 400 mm Maximum length of the workpiece: 1100 mm Machine weight: 9200 kg

Watercooled chiller/Heat pump Climaveneta FOCS2 W H CA E 1601 441.9 kW/456.9 kW Cooling capacity: 441.9 kW / 125.65 tons (12/7 — 35°C) Heating capacity: 456.9 kW / 129.92 tons (40/45 —7°C) Year of manufacture: 2016 Options: Heat pump. Economizer. Refrigerant circuit: 1 pcs. Heat exchanger: Shell and tube Compressors: 1 pcs. Bitzer CSW9563-140CVY-40D (screw) Type of refrigerant: R134a Dimensions: 4.2x1x2.2 m Weight: 3570 kg Condition: Outlet

8 fans & 4 compressors, 63 KW

Watercooled chiller/Heat pump CIAT LWHE 4628E0003- 1736 kW/ 1964 kW Cooling capacity: 1736 kW / 493.62 tons (12/7 — 30/35°C) Heating capacity: 1964 kW / 558.45 tons (40/45 —10/7°C) Year of manufacture: 2021 Options: Economizer. High efficiency. Heat pump. Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Compressors: 2 pcs. Carlyle 06TVW819SW3D.A42 (screw compressor with stepless control between 15% and 100%) Type of refrigerant: R134a Dimensions: 4.83x2.13x1.6 m. Weight: 9850 kg. Working hours: 0/0 h. Condition: New

Inv. Num. : 8518 Type: MasterCut Compact 60 Producer: MicroStep Created: 2017 Parameters: Control System: iMSNC Software: AsperWin Basic (2017) Switch-on hours: 17000 h Operating hours: 8800 h Work table length: 6000 mm Work table width: 2000 mm Maximum sheet thickness when cutting: 25 mm Maximum sheet thickness when cutting (stainless steel): 25 mm Maximum sheet thickness when cutting (aluminium): 20 mm Plasma Source: Formica ForCut 203A KPA Machine height: 2030 mm Machine length: 8100 mm Machine width: 2800 mm Machine weight: 5140 kg Equipment: Technical documentation

Manufacturer: Prima Power Model: Combo Type of Machine : Laser cutting machine Find more here - / Contact us at -

Ice cream machine from carpigani, in working order.

Lathe Centauro Copy lathe Type: T 2 Model: C 140/4 Clamping length 1400 mm Center height 250 mm automatic feed infinitely adjustable feed rate 0 – 1.5 m/min. Spindle speed adjustable via belt Speeds: 900 / 1200 / 1500 / 1800 / 2400 / 3000 rpm. 2 knife holders with bezel with workpiece holder for long workpieces 2 molded steel holders 3 x 3 jaw chuck with a lot of tools Dimensions 3000 mm x 580 mm x H 1260 mm Weight approx. 650 kg

Measuring range X/Y/Z: 700mm/700mm/500mm, probe ball diameter: 7.9942mm, control: Zeiss C90, touch probe: PH6/TP6, max. measuring deviation: 3.6+L/250µm, max. angle error: 0.22°, weight: approx. 1500kg. Documentation available. On-site inspection is possible.

Key data: 140 °C, 10 kW

Max. heating capacity - 140°C Heat transfer medium – water Power: 10 kW Device has: - a vacuum pump - a vacuum chamber - a function to suck medium out of tools - The device can be integrated with the machine, unattended

Key data: 90 °C, 10 kW

Temperature control unit for tools - Wittmann Basic-C90 Year of Make: 2015 Location: Lodz, Poland Description: Max. heating capacity - 90°C Heat transfer medium – water Power: 10 kW Device has: - a vacuum pump - a vacuum chamber - a function to suck medium out of tools - The device can be integrated with the machine, unattended All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Specifications: Manufacturer: 3M ESPE Type: Lava CNC 500 Control: Beckhoff Year of Make: 2008 Compressed air: 6.5 bar Rated power: 1 kW Rated mains frequency: 50/60 Hz Weight Weight: 620 kg Condition Condition: Used Functional: Tested and fully functional

Specifications: Manufacturer: 3M ESPE Type: Lava CNC 500 Control: Beckhoff Year of Make: 2008 Compressed air: 6.5 bar Rated power: 1 kW Rated mains frequency: 50/60 Hz Weight Weight: 620 kg Condition Condition: Used Functional: Tested and fully functional

We have 2 complete controllers (built in 2006) with all cards for Cathild drying chambers. Sale is possible in a package or individually.

Key data: 180 mm, 2000 U/min

Built in 1990 Center height 180 mm Turning diameter over carriage 190 mm Center width 1,000 mm Spindle passage 55 mm Max. spindle speed 13-2,000 rpm Spindle drive 7.5 kW Quill stroke 150 mm (MK4) Machine weight 1,650 kg Accessories: Digital display, 3-jaw chuck, quick-change steel holder with 4 inserts, 2 steady rests, coolant device.

Turns: 3.25, infeed: south, outfeed: West, infeed height: 3700mm, outfeed height: 1000mm, transport direction: downwards, max. belt speed: 40m/min, max. belt load: 45kg/m. Including an external control cabinet. Documentation available. On-site inspection is possible.

Lathe CMZ TTL 66 Year 2021 9500h Duty Cycle Hours

Vertical Multistage High Pressure Centrifugal Pump GRUNDFOSNome pump, but part of the magnetic coupling has been dismantled. Type CRN 10-09 MP-FGJ GI-Vyear approx. 2012Flow rate at 7.2 bar: max. 10 m3/hDischarge height: max. 91.8 metersGrid connection: 400 volts, 50 HzPower: 3 kW- pump structure in 9 stages- made of stainless steel 1.4401- The pump in mint condition was used as a spare parts dispenser, but there are several new pump chambers- part of the magnetic coupling is missingsuitable for drinking water supply, irrigation

Screw Compressor WORTHINGTON - CREYSSENSAC Type Rollair 40 -- RLR 40BM6Fabr. No. 6240330200 built in 2003Volume flow rate 4.6 m3/min. Pressure capacity 10 barMotor power main motor 30 kWNe-connection 400 Volt, 50 HzConnection thread 1 1/2 inch- 36004 Switch-on hours read- 19256 load hours read- SoundproofedSpace requirement L x W x H 1850 x 1050 x 1760 mmWeight 910 kggood condition; used

Plasma cutting machine CLOOS type CPS 40/80Year of construction 1990Power at 60 % ED 80 Amp.Power at 100 % ED 40 Amp.Adjustment range 40 and 80 Amperes (2 steps)Cutting capacity for steel max. 25 mmHose package length 5.5 metersMains connection 400 Volt with 32 Amp. Plug and hand torch CLOOndimension L x W x H 700 x 600 x 750 mmWeight 160 kgGood condition; used

Clinch unit TOX - Pneumatic-Hydro Tox pressHydro-pneumatic press TOX Pressotechnik POWER PACKAGEType type CRS 03.62No.: 207599.2Year of construction approx. 2005Pressure capacity: max. 80 kN = 8 tonProjection: 20 mmInstallation height: 32 mm- Built-in clinch tool- pneumatic valve for control- Push-through joining or clinching- For making a form-fit connection of 2 sheets without perforating or heating the sheets- Mounted on the stand- with the simplest electrical control and Foot switchWeight: 230 kgComes from

CNC Univ. Tool Grinding Machine SCHÜTTE Type BU 400 CNC 4Machine - Defect - without ControlMachine not ready for operation - electric without function - without CNC controlFabr. No: 03-02 Year of manufacture 19904 axes (X, Y, Z and R)Table clamping surface 1300 x 250 mmCenter width 700 mmCenter height 155 mmGrinding length (X-axis) max. 400 mmGrinding width (Y-axis) max. 260 mmGrinding spindle speed max. 6000 rpm. Grinding spindle drive 3 kWNet connection 380 Volt, 50 Hz, 25 Amp.- CNC control

MF welding machine with water-cooled impact pointMedium frequency impact pointManufacturer: TECNA (Italy) Type 3670 E CF00Serial No.: 00022 Year of construction 2014Nominal welding capacity 25 kVAMax. Welding power 160 kVANnet connection 400 volts, 50 Hz- Welding control TE750 or TE760- Impact point for one-sided spot welded joints- Ideal for repair work in the body area with the best welding quality- Water-cooled type 2BHPLN- Mobile transport trolleyWeight approx. 155 kgvery good condition - As good as new;

Filter fitting, filter unit COMPAIR for compressor systemsCompressed air filterType: CF 0087B ZPFabric no: 3363006 / 05 / 005Operating pressure: max. 16 barThreaded connection: G 1 1/2Flow rate: approx. 8.5 m³/min Filter element no: CE 0087B- Filter housing made of aluminiumWeight: 5 kgDimensions L x W x H 125 x 110 x 420 mmgood condition; used

CNC Control, Numeric Control, CPU Rackaus OKUMA LB 10OKUMA Typ OPUS 5000 CPU /IF RACK 9ANr.: E7191-292-325-1Baujahr 1985Ser. Item no.: 003184Dimensions W x H x D 390 x 345 x 240 mmThe device is still ready for operation installed in an OKUMA LB 10. Further components from OKUMA can be found under stock number: 60403, 60404, 60405, 60407, 60408, 60409, 60410, 60411; used

6 Axis Robot Servo Controller,Drive, Motion Control, Servo Pack, Servo UnitServo Unit for YASNAC XRC UP6YASKAWA / MOTOMAN Type CACR-UP6AACO/N RA8616-0Y4A-46S/N: D000Z2676590046Version: 6 Axis Module for Robot- Suitable for YASKAWA / MOTOMAN / YASNAC XRC UP6- Interface USB Power Supply Type JUSP-RCP01AACAnmity W x H x D: 270 x 310 x 200 mmWeight: 8.5 kgUsed, very good condition; used