We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,251 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
315,0 kW, max. 10,0 bar, 45,70 m3/min.
used
30,0 kW, max. 7,5 bar, 4,86 m3/min.
used
75.0 kW, max. 7.5 bar, 12.60 m3/min.
used
11.80 kW, max. 10.5 bar, 56.50 m3/min.
used
Crankshaft Recon Completely ground to 1st level: 0.025'' Tn. 6L7500 Attention: We also have various other RECON parts from different manufacturers/types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!
used
Air Screw Compressor Atlas Copco GR 200 200 kW, 20 bar, 21.66 m3/min. New Elektronikon control at 20000 total hours. Actual operating hours 21409
used
Rotary screw air compressor Atlas Copco 200 kW, max. 20 bar, 21,66 m3/min. New elektronikon controller at 20000 total hours. Real working hours 21409
used
110,0 kW, max. 20,0 bar, 12,60 m3/min, with built in dryer, only 80 working hours. Condition as new.
used
110.0 kW, max. 20.0 bar, 12.60 m3 rpm, with built-in dryer. only 80 operating hours. State as new.
new
Güldner 2-6L79,G20-50 Zylinderkopf kpl.mit Ventilen im Austausch ab Lager lieferbar. Preise per Stück,zuzügl.gesetzl.Steuer,Preisänderungen vorbehalten. info@miw-zeven.de
new
used
Cold water set make Combitherm Germany, water-cooled, cca.400Kw.with 2 pcs. Screw compressor Bitzer Type CSH 7571-90Y, refrigerant R 407C, two circles 50/50%, with control Digital uwm. Y.O.M.2005.Little used.state like new. Model KWW 7500 R407C
used
14.5 bar, 22.80 m3/min, refrigerant R 404a.
used
14.5 bar, 43.50 m3/min, refrigerant R 404a.
new
Cat pump, model 70
used
Rodolfo Comerio 5 roll 'L' calender, Year: 1981, Peripherally drilled hard chrome plated rolls 650mm dia x 2400mm wide (2 spares), High pressure hot water heating (28 bar), Roller bearings, Motorised nip adjustment, Roll bending on rolls 2,4 and 5, Cross axis on rolls 1 and 4, With Farrel Pomini full unidrive gearbox (choiceable 2 speed 30m/min or 60m/min), dc variable speed motor to each roll 88.2kW to rolls 1,3,4 + 5, 110kW to roll 2?. Motors not included. Previously used for rigid PVC film 2000mm finished width, 100micron - 1100micron. Calender max speed 60m/min. Post calender equipment:- 7 x Take off rolls? 150mm dia x 2200mm wide (3 groups), Hydraulic embossing station 300mm dia x 2200mm wide (rubber roll driven, emboss roller free running against rubber roller), 12 x cooling drums (4 groups) 180mm dia x 2200mm. Beta thickness gauge (not available) Berstorff edge ...
used
200.0 kW, max. 9.0 bar, 32.60 m3/min. motor: 400V/50Hz, 460V/60Hz.
used
200,0 kW, max. 9,0 bar, 32,60 m3/min. Motor: 400V/50Hz, 460V/60Hz.
used
110.0 kW, max. 20.0 bar, 12.60 m3 rpm, with built-in dryer. only 80 operating hours. State as new.
used
110.0 kW, max. 8.5 bar, 18.72 m3/min.
used
110,0 kW, max. 8,5 bar, 18,72 m3/min.
used
250 kW, max. 10.0 bar, 35.88 m3/min.
used
250 kW, max. 10,0 bar, 35,88 m3/min.
used
200.0 kW, max. 10.00 bar, 30.00 m3/min. oil-free, water-cooled, excellent condition.
used
160.0 kW, max. 7.50 bar, 27.40 m3 rpm, oil-free, air-cooled
used
160,0 kW, max. 7,50 bar, 27,40 m3/min, oil-free, air cooled.
used
Compressed air screw compressor, 75.00 kW, 3x GA 808 and 1x GA 810
used
Rotary Screw air compressor, 75.00 kW, 3 x GA 808 and 1 x GA 810
used
Cold water set water-cooled, turbo-cooling machine, Carrier 19XR5556, R134a, 400V 50Hz,Bj 2001,ca 2500KW (700ton)Cooling capacity, little operating hours, always maintained,very good condition, super efficiency.
used
90.0 kW, 10.0 bar, 15.0 m3/min. With frequency inverter. Volume flow 2.4 - 15 m3/min at 7.5 bar.
used
90,0 kW, 10,0 bar, 15,0 m3/min. With frequency inverter. Volume flow 2,4 - 15 m3/min at 7,5 bar.
used
90.0 kW, 8.0 bar, 12.78 m3/min. Oil-free, air-cooled.
used
90,0 kW, 8,0 bar, 12,78 m3/min. oil-free, air cooled.
used
75.0 kW, max. 13.0 bar, 13.80 m3/min. With built-in frequency inverter. Volume flow 2.0 - 13.8 m3 rpm.
used
75,0 kW, max. 13,0 bar, 13,80 m3/min. With built-in frequency inverter. Volume flow 2,0 - 13,8 m3/min.
used
45.0 kW, max. 7.50 bar, 6.06 m3/min. oil-free, air-cooled.
used
45,0 kW, max. 7,50 bar, 6,06 m3/min. Oil-free, air cooled.
used
160 kW, max. 7.50 bar, 30.30 m3/min. With built-in compressed air dryer.
used
160 kW, max. 7,50 bar, 30,30 m3/min. With built-in compressed-air dryer.
used
315 kW, max. 10.0 bar, 41.20 m3/min. oil-free, water-free. Voltage 3300V, 3ph, 50 Hz. New control electronics Mk4.
used
315 kW, max. 10,0 bar, 41,20 m3/min. Oil-free, water cooled. Voltage 3300V, 3ph, 50 Hz. New controller Elektronikon Mk4.
Zylinderkopf im Austausch DEUTZ BF4M2012/C komplett überholt mit Ventilen. sofort ab Lager lieferbar info@miw-zeven.de
used
160.0 kW, max. 7.50 bar, 22.70 m3/min. oil-free, air-cooled
used
160,0 kW, max. 7,50 bar, 22,70 m3/min. Oil-free, air cooled
used
110.0 kW, max. 20.0 bar, 12.60 m3 rpm, with built-in dryer. only 80 operating hours. State as new.
used
132 kW, max. 10 bar, 18.3 m3/min. oil-free, water-covered
used
132 kW, max. 10 bar, 18,3 m3/min. Oil-free, water cooled
used
160 kW, max. 10 bar, 25.10 m3/min.
Qty. 1 Second-hand Twin-Roll Aluminium Continuous Strip Caster Line General information: ALLOYS: 1xxx, 8011 and 3003 on this caster with good results at the cold rolling mill stage. INSPECTION: The line can be inspected under power. TRIAL CAST: They cannot cast a trial coil. Some movement of the equipment can be seen. ISSUES: The launder lining will need to be replaced (which has to be done when it is moved anyway). The bottom caster roll shell is damaged and needs to be replaced. The good news is that the roll core (the expensive part) is in excellent condition. Mfc.: CASTAL Ltd. Strip width: 1350 mm – 53.15” Strip thickness: max. 12.0 mm – 0.472” min. 4.2 mm – 0.165” achieved! Casting speed: 1050 alloy – 1.5 MT / h achieved 3003 alloy – 900 kg/h achieved Caster configuration: Horizontal – 15 degree tilt
used
160 kW, max. 10 bar, 25,10 m3/min.