126,720 used machines on RESALE, but how to find them? Machine Search
Inv. Num. : 8059 Type: SMART 5 NJ60-2.2 Producer: Comau Created: 2015 Parameters: Switch-on hours: 4675 h Maximum arm reach: 2258 mm Number of axles: 6 pieces Maximum load capacity: 60 kg Machine weight: 645 t Equipment: Blacksmith stand Switchgear Fencing
This 3-axis TOS Olomouc FV30 CNC A was manufactured in 2015. It features a spindle speed range of 50-6000 rpm and a tool changer with 12 positions. The machine has a maximum workpiece weight capacity of 360 kg and working strokes of 760 mm in the X-axis, 380 mm in the Y-axis, and 152 mm in the Z-axis. If you are looking to get high-quality machining capabilities, consider the TOS Olomouc FV30 CNC A vertical machining centre we have for sale. Contact us for further details.
This 3-axis Combitec CT-450 CNC Internal Cylindrical Grinding Machine was manufactured in 2002. It features a robust design with an included extraction system and fire extinguishing system. With approximately 74,500 operating hours, this machine shows age-related signs of wear on the guideways. If you are looking to get high-quality cylindrical grinding capabilities, consider the Combitec CT-450 machine we have for sale. Contact us for further details.
Inv. Num. : 8070 Type: Multiturn 3000 Producer: Colchester Created: 2005 Parameters: Control system: FANUC Maximum turning diameter over bed: 460 mm Maximum turning diameter over support: 270 mm Spindle diameter: 78 mm Motor power: 11 kW Maximum spindle speed: 2250 1/min Travel X: 296 mm Travel Z: 1530 mm Equipment: Owner Vacuum
Specifications Center width mm 1000 Tip height mm 300 Grinding length mm 1000 Workpiece weight between tips kg 800 Load on the workpiece spindle during on-the-fly grinding Nm 200 X-axis - infeed movement Feed speed mm/min 0.01-8000 Linear measuring system, internal resolution mm 0.0001 Z-Axis - Table Movement Table speed mm/min 0.01-8000 C-axis - workpiece headstock Speed min-1 0-300 Drive power kW 5 Pick-up taper MK 5 / KK 6 Grinding spindles Power grinding spindle motor with water cooling kW 15 Grinding wheel circumferential speed m/s 35 (63) Grinding wheel, standard mm 600x80x203.2 Tailstock MK 5 pick-up taper Workpiece Tension Spring Hydraulic Retraction
Center spacing 1 000 mm Max. diameter of the cylinder to be ground 250 mm Minimum step of the X-axis 0.001 mm Minimum step of the Z-axis 0.005 (0.001) mm Circumferential speed of the grinding wheel 25 – 45 m/s Maximum weight of the workpiece between the tips 80 kg Maximum weight of the workpiece including pick-up – on-the-fly clamping 25 kg Grinding wheel diameter 400 mm Cizctcazsk Grinding head spindle drive 4 kW Kavalír CNC control system
Key data: 3600 mm, 4200 mm, 4800 mm
Specifications Control Siemens Sinumerik 840 Dsl Main dimensions and travels Face plate diameter 3,600 mm Circumferential diameter (max.) 4,200 mm Workpiece height (max.) 4,800 mm Total height of the machine 8,700 mm Maximum workpiece weight 80,000 kg. Table base Y Horizontal table displacement 2,000 mm Crossbar Vertical adjustment of the crossbeam in 100 mm increments 2,800 mm Crossbeam Support (Right) Horizontal adjustment support - 1,800 to + 2,200 mm Vertical displacement of the chisel slide valve 1,500 mm Cross-section of the chisel slide 240x240 mm Tool stations 20 pcs. Side Support (Right) Vertical adjustment support 2,800 mm Horizontal displacement of the chisel slide valve 1,000 mm Cross-section of the chisel slide 240x240 mm Turning diameter max./min. 4500/2500 mm Tool Changer Main Drive: Main motor power 105 kW Face plate speed ...
Inv. Num. : 7814 Type: CWK 800 Producer: Starrag Heckert Created: 2004 Parameters: Control system: Siemens Sinumeric Switch-on hours: 60035 h Hours: 31689 h Work table length: 800 mm Work table width: 800 mm Maximum workpiece weight: 1500 kg Spindle power: 28 kW Machine length: 6330 mm Machine width: 5760 mm Machine weight: 18100 kg In 2021 repairs: Replacement of linear guides and ball screws on the X, Y and Z axes Spindle replacement and ATC cabling Machine geometry ATC Function Test
Can filling line, capacity 10,000 - 16,000 cans/hour, 330 + 500 ml, 0.33 + 0.50 standard can 202, depalletizer, filler & seamer 28-4, tunnel pasteurizer, can transport. 22,000 operating hours. Beverage Canning line, capacity 10,000 - 16,000 cph, 330 + 500 ml, 0.33 + 0.50 Standard can, can end 202, depalletiser, Filler & Seamer 28-4, Tunnel pasteuriser pasteurizer, can conveyors, 22,000 operating hours.
BVI / ThyssenKrupp Condensing steam turbine MARC6-C03 2005 power generator with 135,000 operating hours, without steam condenser and AC generator. Inlet pressure 89 bar, outlet pressure 0.11 bar, 21,000 KWel x 1,500 rpm, Steam turbine BVI / ThyssenKrupp MARC6-C03 Manufacturer: BVI / ThyssenKrupp Model No.: MARC6-C03 Type: Steam Condensation Serial number: P-900078 Power [KW]: 23,545 Pressure Input [bar]: 89 Temperature Input [°C]: 520 Pressure output [bar]: 0.11 Year of Make: 2005 Hours: 135,000 Weight [kg]: 58,000 Dimensions LxWxH [cm]: 510x400x340
Selling Proposal for a Generator Set Product: Container generator set 20 FT Engine: Detroit Diesel type CW800 Power: 800 kVA Year of creation: 1997 Operating hours: 1650 hours Status: Always serviced, currently operating in a data center Contact 0033689741883 Mail: negomat93orange.fr
Product number: 3072B Type: CMC400 Serial number: 426 Year of construction: 2008 Belt width: 400 mm Filling capacity: 27 litres Power: 3 x 400V, 50Hz, 0.7kW Dimensions: 2860 x 750 x 1450 mm Weight: 390 kg With adjustable take-over outfeed conveyor
Self-learning lathe CMT TCH 700 x 5000 :::TECHNICAL SPECIFICATIONS::: CNC model: ECS - Spindle nose: ASA 11 - Spindle power: 35Kw - Turning diameter on the bench: 720mm - Turning diameter on the carriage: 385mm Turning length: 5000mm - Number of revolutions: 2200 - Bar passage: 105mm - Mechanical range change: yes - Number of ranges : 2 Turret: automatic Number of tool turrets: 1 Number of tool positions for the first turret: 12 First turret tool attachment type: VDI First turret X-axis travel: 450mm Z-axis travel first turret: 5000mm :::D DIMENSIONS AND WEIGHT::: Weight: 8000Kg
DMG MORI CMX 1100 V CNC machining center was built in 2019 in Japan by DMG MORI CO.,LTD. The machine, designed for machining workpieces with a maximum weight of 1000 kg, is distinguished by the use of state-of-the-art components and technical solutions which guarantee excellent machining results for many years of continuous operation. The machining process is performed inside a fully illuminated workspace by means of reliable components in the form of cutting tools and a high-speed spindle. The ‘C’ shaped cast iron bed perfectly dampens any vibrations and oscillations generated during machining, while ensuring the highest possible process stability. The CMX 1100 V CNC vertical machining center on offer also has a wide range of optional equipment, consisting of, among others, measuring probes from the renowned RENISHAW brand, a divider and the advanced MAPPS FANUC CNC control. Over ...
Reform Bautz Compact MF60 machining center :::TECHNICAL SPECIFICATIONS::: CNC Model: Selca - CNC Version: 4045PD - Tool Holder: HSK 63 - Spindle Speed: 18000 Number of tools: 99 - X-axis travel: 1380mm - Y-axis travel: 600mm - Z-axis travel: 500mm - Swivel rotary table: yes Swivel rotary table type: continuous Table size: 710 x 710mm Allowable load on the board: 700Kg High refrigerant pressure: yes Chip conveyor: belt Presetting: yes Other technical data: Machine with granite base Machine equipment: Renishaw probe ready :::D DIMENSIONS AND WEIGHT::: Weight: 12000Kg
CORMAK LF3015LNR laser cutting machine was built in 2021 by the Polish company CORMAK. The machine, which is designed for precision cutting of tubes, sheets and profiles, uses advanced FIBER technology to machine even the hardest materials of various thicknesses. This technology is a much more cost-effective alternative to CO2 machines of similar power, while also guaranteeing low operating costs and trouble-free operation for many years of use. The workpieces are machined with a reliable RAYTOOLS cutting head with autofocus and protective glass. It moves along a sliding gantry made of aircraft aluminium. The installed software automatically adjusts the focus lens from -10 mm to +10 mm, ten times faster than standard manual adjustment. Both the collimator lens and the focus lens are equipped with a heatsink to reduce the temperature of the cutting head and thus extend its service life ...
RACING Longitudinal travel of the X-axis mast 16,000mm Vertical travel of the Y-axis head 3,000mm Z-axis head transverse travel 1,250mm Cross stroke boring spindle W axis 700mm HEAD DIMENSIONS 410 X 505mm MANDREL Boring spindle diameter 140mm ISO 50 spindle attachment Spindle rotation speed: 5 – 3,000rpm ADVANCES Continuous working axes X, Y, W, Z 0.5 – 6,000mm/min Fast X, Y, Z axes 18,000 mm/min Rapid W axis 10,000mm/min Working thrust 2,000kg ENGINE POWER: Spindle motor in continuous service (S1%) (AC) 42 Kw Axis feed motors (AC) 50 Nm Auxiliary engines 4.5 Kw Machine in excellent condition.
Payload 10,000 kg Rope diameter 22 mm x 150 meters length as specified in the documentation Operating pressure 55 bar to max. 80 bar Flow rate 19 litres / min to max. 272 litres / min Rexroth hydraulic motor Hydraulic control block with mounting base Documentation and test book available The winch was used on a test bench / test tower. Space requirement L - 2,100 x D - 1,400 x H - 1,300 mm complete with control block Weight approx. 1,500 kg
Beckhoff C6220 Industrial Control Cabinet PC for Heinen( Diana Control) Control Jagenberg Diana Pro. Used, tested.
Bebro Electronic DC CAN alpha 2500145X Motor Controller for Jagenberg Diana Pro. Used, tested.
Zellschneider photovoltaic solar cells. 5000 whole cells from the front per hour. 10000 half cells from behind per hour
Granulator Manufacturer: CONDUX Type: CS 300/600-4 WK Rotor 300 mm diameter x 600 mm wide 3 rotor blades, open rotor Housing with 4 stator knives With drive motor 11 kw (maximum 30 kw on request)
Circular Saw Blade Sharpening Machine Vollmer Type CNS Suitable for CV circular saw blades for straight and bevel grinding Grinding wheel diameter maximum 150 mm Saw blade diameter 90 – 600 mm Sharpening speed 3 speeds 30/60/80 teeth per minute Drive warping disc motor power 0.2 kW Drive Feed 0.4 kW Dimensions 800 mm x 900 mm x H 1800 mm Weight approx. 250 kg
A conveyor belt from the company Schöne from Berlin is offered. Technical data: Manufacturer: Schöne Transportbänder GmbH Model: Conveyor belt CNW-5E white FDA Dimensions: 2,100 x 878mm wide, endless, spiral connection V55MO + edge verse The belt is currently at our customer's site in Pasewalk and is being sold due to restructuring. Only the offered assets are expressly sold, any items that can be seen in the photos are expressly not part of the scope of the offer. We sell the assets on behalf of our customers. The offer prices are net prices in EURO ex works. Since these are used assets, we sell them without guarantee or warranty as well as the right to take back. The offers are subject to change, subject to errors and subject to any prior sale. Our terms and conditions also apply to every sale, to which we expressly refer
MAKE CHIRON MODEL MILL 800 5 axis 5 axis machininng center (milling/turning from bar) Under power in our warehouse in Gussago BS Italy Mimu Machine tools CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 â 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs 90fjsieew Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Highspeed (2) 60m/min. Spindl ...
Vertical machining center CHIRON FZ08W 2 pallets 12 HSK32 tools Spindle 15000 rpm HSK-32 rotopallet (2 pallets) CNC Fanuc 21iM chip conveyor The machine is under power in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy, CNC type: Fanuc 21iM, 2 pallets: Yes, Number of pallets: 2, Spindle speed RPM: 15000
5 axis machininng center (milling/turning from bar), Under power in our warehouse, MAKE CHIRON, MODEL MILL 800 5 axis, CNC Fanuc 18iMBS (5 simoultaneous axis 1), X, Y, Z (mm) 800 â 500 - 550, Rapids (Highspeed) 60 m/min, Swivelling head CNC controlled (B axis) +/- 100°, Turning spindle Peiseler, Milling spindle 12.000 giri / 140 Nm (v nota 2), Tools 65, Tool type HSK-A 63 DIN 69893, Tool-change time 1,5 sec (v nota 3), Table 1400x500, Max table load 1200 kgs, Coolant through spindle 70 bar (see note 4), CNC controlled clamping/rotating unit for 6th face machining (v. nota 5), Pressurised linear encoders, Swarf conveyor, Renishaw-ready, Y.O.M. 2006, Weight 7500 kgs, Turning package, Max dia 65mm, RPM: 15 / 4500, Max 42,5 KW / 90 Nm., Hydraulic clamping 800 Nm., Bar loader ILS-RBK- 10012 65, Diameters min/max 5/65 mm L= 600-1200 mm, Highspeed (2), 60m/min., Spindle 20-12.000 min.â ...
pressure: 63 t throat: 315 mm stroke: 8-100 mm no. of strokes: 140 Hub/min ram - range of adjustment: 63 mm table surface area: 1200x630 mm ram surface: 800x315 mm hole in the table: Ø 110 mm table height: 820 mm tool hole in ram: Ø 50 mm dayligth: 335 mm total power requirement: 7,5 kW weight of the machine ca.: 5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Guide cylinder, compact cylinder with guide COMPAIR GCXA063H125 8265590 piston diameter: Ø 63 mm rod diameter: 3x Ø 20 mm stroke: 125 mm end plate: 148 x 19 x 80 mm New ! Dimension: 350 x 155 x 85 mm
Pneumatic cylinder, compact cylinder, double-acting COMPAIR PXH125N02M400BAC M08R. piston diameter: Ø 125 mm stroke: 400 mm rod diameter: Ø 30 mm rod thread ( outer ): M27 x 2.0, length: 63 mm with nut, wrench size: 40 mm pneumatic connections: 1/2 ( inch, female thread ) New ! Dimensions: 690 x 140 x 140 mm
Linear unit for pneumatic cylinders COMP AIR
grinding length:400 mm workpiece weight:250 kg weight of the machine ca.:4,1 t swing diameter:250 mm grinding spindle speed:2387, 2938 U/min
Lathe with 4 tools only for 3-cylinder crank shaft
weight of the machine ca.:18 t centre distance:700 mm max. swing diameter:200 mm Lathe with 4 tools only for 3-cylinder crank shaft
Basket size LxWxH:550 x 300 x 350 mm No. of washing chambers:1 No. Of tanks for washing:1 Temperature for washing water:60 °C Ultrasonic cleaning unit with high alloybasket - Ultrasonic frequency 28 kHz - automatic breakdown for heating and ultrasonic for low level water
turning length:140 mm dimensions of the machine ca.:4 x 2 x 1,9 m
feed pressure:8 bar :9 m³/min Number of working hours:18671 h voltage:380 - 415 V total power requirement:58,5 kW weight of the machine ca.:1300 kg dimensions of the machine ca.:2000 x 1100 x 1700 mm
total power requirement:10,5 kW weight of the machine ca.:4800 kg dimensions of the machine ca.:3000 x 2100 x 2000 mm centre distance:1200 mm Height of centres:200 mm grinding-table stroke max.:X -Achse 1000 mm table-size:2060 x350 mm z-axis:Querhub 250 mm Feed speed:0,005 - 5 m/min. grinding head - swivable:360 ° taper ISO:50 control:Sinumerik System 8 Documents:vorhanden
total power requirement:380V, 50Hz, 7,9A kW weight of the machine ca.:1 t dimensions of the machine ca.:4 x 3 m
Servocontroller ATLAS COPCO QCS 340 15 ( QCS34015 ) 4240 0329 81 regenerated ! Dimensions: 230 x 240 x 45 mm
Servocontroller ATLAS COPCO QCS 340 15 ( QCS34015 ) 4240 0329 80 Dimensions: 310 x 240 x 45 mm
This 3-axis SCHÃCO PDG E CUT was manufactured in 2009. It features a maximum saw blade diameter of 600 mm and operates at a motor speed of 2410 minâ»Â¹. The machine includes a discharge conveyor belt and an extraction system for efficient operation. If you are looking to get high-quality cutting capabilities, consider the SCHÃCO PDG E CUT double mitre saw we have for sale. Contact us for further details.
CNC unit with oscillating cutter head Brand: Atemag Type: Function Line Soft Cutter Pro Max. drive speed 6.000 R.P.M Max. tool spindle speed 9.000 R.P.M. (Frequency 150Hz) Gear ratio i = 1:1,48 Torque max. 8Nm Amplitude: 4mm
CNC unit for moulding or saw blade package Brand: Atemag Type: Ultra Line Mega Cutter Position of tool spindle 90° Max. drive speed 12,000 R.P.M. Max. tool spindle speed 7.690 R.P.M. Gear ratio i = 1:0,641 Turning direction left/right Torque max. 22 Nm Tool interfaces: arbour with 30mm diameter, 120 clamping length, max. tool diameter 160mm - without tools -
TIG welding machine with water cooling CLOOS GL 250 I-HAT 20 / 250 A 10 / 20 V year of construction 1990 used, tested ! Dimensions: 1200 x 600 x 800 mm
Coolant valve COAX MK 10 NC 14 10C1 3/8DC 24L 16 523267 146189-01 New !' Dimensions: 160 x 105 x 50 mm
Coolant Valve Maintenance Kit CO-AX MK 10 NC 14 10C1 1/2DC 24L 0 - 16 bar Connections: G 1/2 ( inch ) Control voltage: 24 V DC Medium: Coolant New !' Dimensions: 145 x 100 x 50 mm
maximum number of results exceeded
please refine your search
