c wrap label used for sale

Air chiller for rooms or machines Power supply 380V, 50Hz Refrigerant R410A Input power approx. 5 kW Cooling capacity approx. 13 kW Cooling air volume 2,000 m3/h

CRIPPA CNC YEAR 2007 LOW WORKING HOURS INCLUDED TOOLINGS AND EQUIPMENT WE ORGANIZE FOR CLIENT AS WELL TRANSPORT

PVS 125 H Micro-cut Drive 15 KW 400 Volt 50 Hz Horizontal design with trrichter Funnel volume approx. 120 liters

Clamping plate, scribing-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Length: 630 mm -Width: 630 mm -Height: 130 mm -Plate thickness: 30 mm -with support ribs -Weight: 121 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Manufacturer: Cavazzuti, pneumatic stamp -Stroke: 360 mm -Cylinder: Ø 85 mm -Piston rod: Ø 18 mm -Number: 6x cylinders available -Price: per piece -Dimensions: 230/120/H540 mm -Weight: 10.3 kg/piece

CNC portal flame cutting machine Manufacturer: MGM Type: Cortina DS3100 Retrofit 2022 CNC control: MS300 Track width: 3,100 mm 1 oxy-fuel burner gas type as desired Track length: 5 or 6 m without table

Collectors' Item! Vertical Reproduction Camera 220V / 2550W / 50-60cycles (Hz) Dims L130 x W120 x H170 cm - 285 kg

Clamping claws, clamping claws, clamping means, clamping element, clamping iron, clamping means, clamps, mounting brackets, clamps, clamping element, bracket, slot clamp -Clamping height: 60 - 370 mm -Clamping depth: 65 mm -Price: per piece -Number: 2 Stück -Dimensions: 290/80/H450 mm -Weight: 9.6 kg/piece

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Manufacturer: Atlas Copco, standard cylinder type C4-200-40 -Stroke: 240 mm -Piston rod: Ø 40 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 320/280/H470 mm -Weight: 34 kg/piece

Loma Combination IQ3 metal detector and CW3 check weigher 250 x 90mm aperture. 200mm conveyor width. 360mm weigh pad width. 2100mm machine length. 920mm line height with adjustable feet. M&S Spec machine.

Compressors, control, compressor control, control panel -Handover: in its current condition as inspected -Cover bottom: damaged, see photo -Manufacturer: Ecoair -Type: Multitronic Control -Dimensions: 280/295/H120 mm -Weight: 2.6 kg

Control OKUMA ... OSP P300M Clamping table surface ... 400mm Axis X ... 762 mm Axis Y ... 460mm Axis Z ... 460mm Spindle speed... 1000-15000 rpm. controlled axes ... 5 cooling... 20bar SK40 Main engine power ... 22/18.5kW Magazine slots ... 48 The machine is in good condition, possible to test under power.

Compressor CompAir L 75 Operating hours approx. 3100 h was used as a reserve compressor Volume flow 10.25 m³/min Motor power 75 kW Very good ready-to-use condition, directly from production!

REF-2357 WORTHINGTON CREYSSENSAC ROTARY-SCREW AIR COMPRESSOR Rotary-screw air compressor. Manufacturer: Worthington Creyssensac. Brand: ROLLAIR. Model: ROLLAIR 75. Compressor: - Rated power: 55kW/75HP - Refrigerated air volume: 9,000m3/h - Sound level: ± 70dB - Weight: ± 1,400kg - Compressed air outlet Ø: 2” - Operating pressure: 12.5 bar Compressor motor: - Manufacturer: LEROY SOMER - Model: AP180LGU-T - Power: 55kW/75HP - 2,945 Rpm - 400V/100A Complete with instruction manual.

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, travel motor, drive motor, control block, hydraulic control block, control unit, control valve -Manufacturer: Casappa, hydraulic control unit for forklifts -Dimensions: 125/115/H300 mm -Weight: 6.3 kg

Condenser LUVE Contardo with two fans, approx. 50 KW

Condenser LUVE Contardo Type HCE 74, with three fans 630mm, approx. 80 KW

Electronic cables, extension cables, electronic wires -Manufacturer: Draka Comteq, data cable -Type: UC2000 B_A 4G50/125 FRNC -Length: 130 m -Price/Sale: complete -Roll dimensions: Ø 500/330 mm -Weight: 20 kg

300mm Conveyor Width. 350mm Weighpad Width. 870mm Line Height. 1370mm Machine length. Right to left production line. Reject bin. Supermarket specification. Adjustable feet.

Takang TKV-860-HT CNC Twin Spindle Vertical Turning Center Year 2015 . GENERAL SPECIFICATIONS Max. Cutting Diameter: 800 to 1000mm Max. Swing Diameter: 1000mm Max. Cutting Length: 860mm Spindle Motor (FANUC aP40): (2) 50 HP Alpha P40 2-Speed Gearbox Motors Spindle Speed Range: 10-1500 RPM Spindle Nose: A2-11 Spindle: Spindle Motor (FANUC aP40): (2) 50hp Alpha P40 2-Speed Gearbox Motors Spindle Speed Range: 10 - 1,500rpm Max Chuck Diameter: Installed 31.5" 3- Jaw Hydraulic Chucks Spindle Nose: A2-11 Front Bearing Diameter: 7.87" Spindle Bearings: Double Row Cylindrical and Angular Contact Spindle Speed Selection: Direct RPM Programming Spindle Speed Override: 50% ~ 200% Speed Range Shift: 2- Speed Gearbox Programmable High-Low Range Axis Drives: X Axis Travel (FANUC a22/3000i AC 4.0 HP): 18.31" Z Axis Travel (FANUC a22/3000iB AC 5.0 HP): 33.07" X Axis Thrust Force: ...

Naxos CNC Multi-Axis Cylindrical Grinder Year: 1987/2013 Max. swing: 630mm Max. distance workhead face to tailstock face: 4850mm Max. travel for Z axis: 5000mm Max. grinding distance for main wheel: 4520mm X axis infeed travel for both headstocks: 720mm Approx. weight between centers: 4000kg Power requirements: 460/3/60 This machine was completely remanufactured to new specifications in 2013 and installed in 2014. It was stripped down to the bare casting, table/base/wheel heads/work head and tailstock and the second z axis ways were fit and rescrapped. New electrical cabinet with all new wiring to the machine and new all components, hydraulic lines, air lines and new cable carriers were added. New Marathon 60HP motors for both grinding wheel heads. (The drives in the cabinet are set for 40 Hp) The spindle drives in the cabinet are Yakawa built in the USA along with the workh ...

Control card, control, PLC control -Manufacturer: Homatic -Type: CPU SPS-II 2-083-01-5053 -Dimensions: 190/40/H260 mm -Weight: 1 kg

Diesel combined heat and power plant, CHP, generator set, power generator used A. van Kaick Year: 1991 Generator DKBN49/200-4 200 kVA 400/231 V 289 A 50 Hz Mtu 8V183TA32 MERCEDES OM 442A 240 kW 1500 rpm Tank dimensions approx. 3600 x 1500 x 1500 mm Dimensions container: approx. Mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Diesel combined heat and power plant, CHP, generator set, power generator used DIETER KUNZLER GmbH Year: 1991 Generator 250DMED 250 kVA 400/231 V 3x 362 A 50 Hz Mtu 12 V 183 AA 31 MERCEDES OM 424 225 kW 1500 rpm Container dimensions: approx. 6000 x 2500 x 2500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Computer monitor, operating unit, operating unit, keyboard, screen, control, industrial monitor -Manufacturer: Cybernet -Accessories: swivel arm, multiple adjustable -Dimensions: 600/200/H365 mm -Weight: 10 kg

Connection line, connection cable, data line, bus cable, signal line -Manufacturer: Chainflex, data cable with plug -Type: CF11.006.D Art.-Hst. 6FX8002-2CA34-1,3M-I -Length: 1.3 m -Weight: 0.4 kg

PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter -Manufacturer: Phoenix Contact, fiber optic converter -Type: PSI-MOS-DNET CAN/FO 850/BM -Price: per piece -Number: 59 pieces -Dimensions: 100/23/H110 mm -Weight: 0.2 kg/piece

Conveyor belt, belt conveyor belt, conveyor belt, belt conveyor, sorting belt, sorting conveyor belt, readout conveyor belt -Side walls made of: stainless steel -Speed: 118 m/min -Drive: 0.75 kW -Belt width: 590 mm -Length: 2000 mm -Transport dimensions: 4360/1170/H1170 mm -Weight: 684 kg

Pneumatic cylinder, air cylinder, pneumatic piston, air piston, standard cylinder -Manufacturer: Atlas Copco, Standard cylinder type C4-200-40 -Stroke travel: 200 mm -Piston rod: Ø 40 mm -Dimensions: 330/280/H510 mm Total weight: 33 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Manufacturer: Atlas Copco, standard cylinder type C4-200 40-200 -Stroke: 194 mm -Piston rod: Ø 40 mm -Total dimensions: 220/265/H645 mm -Total weight: 24 kg

CME FCM 9000 Bed milling machine 5-axis Table size 9500 x 1200 mm. Travel X-axis 9000 mm. Y-axis 1500 mm. Z-axis 1500 mm. Maximum table load 5000 kg/ Mtr. Vertical milling head can be swivelled by 1°x1° CNC control Heidenhain TNC 430 CB If you have any questions about the machine, as well as a scheduling for viewing, please contact us by phone or e-mail.

Machine Details Warehouse number 1105-03697 Machine Type Machining Center - Vertical Brand CHIRON Type FZ 08 S Year of construction 1998 Control type CNC Storage location HAGUENAU Country of origin Germany Delivery time immediately - pre-sale Freight base from stock HAGUENAU FRANCE Technical details x-travel 300 mm y-travel 250 mm z-travel 250 mm Total power requirement 8 kW Machine weight approx. 1.8 t Information very well maintained 3 axles BZ CHIRON FZ 08 with FANUC 18 I M - speeds up to 10000 rpm - rapid traverses up to 60 m ! HSK 30

REF-2258 ANGELUS 60L AUTOMATIC CAN SEAMER WITH 6 SEAMING HEADS AND 24-VALVE VACUUM FILLING MACHINE Automatic can seamer with 6 seaming heads. Manufacturer: Angelus. Model: 60L. Can size: ø73mm. Complete with a 24-valve vacuum filling system (the vacuum pump is included). Overall dimensions: width 2,400mm, length 4,000mm, height 2,600mm.

REF-2260 SOMME FORTUNA-363 AUTOMATIC CAN SEAMER WITH 6 HEADS, CLINCHER AND 18-VALVE SOMME VACUUM FILLING SYSTEM Automatic can seaming machine with 6 seaming heads and clincher. Manufacturer: SOMME. Model: Fortuna-363 Fitted with a SOMME 18-valve vacuum filling unit. Can size: Ø 73mm. Output: 18,000 Cans/ hour Overall dimensions: length 5,500mm, width 1,800mm, height 2,300mm

Pivatic perforating and bendingline Line is manufactured 1999 and it has worked very well for us 20 years. Line is bending line with perforation unit and single press unit 35 tn. In line is separate punching unit so you can perforate material and cut it to separate ballet. Also you can use separate press toll in line. This press unit we have not used, because we other presses. FORSTNER coil cradle Weingarten Decoiler Dimeco Coil feeding line decoiler - straightener feeder Automatic Flexible punching and rollforming line for C and sigma profiles with centralized adjustment”, from Dimeco (Spain), installed/commissioned in 2019 Dimeco Coil feeding line PIVATIC coil punching line FIMI Slit Coil Decoiler and reel winder tunçman Extrusion - Single screw extruder LEMO INTERMAT Thermoforming - Automatic Roll-Fed Machine Uhlmann Blister machine Accela-Cota 170 l Tablet c ...

Available in stock 1 x Used GrimmerSchmidt Compressor. The compressor was installed in a biogas valorization plant that stopped working. Now the equipment is stored in our warehouse. The equipment is used but in good working conditions. RPM: 6600 RPM Flow: 30 CFM Rating: 80 psig Main Motor Voltage: 460 / 380 V Main Motor Frequency: 50 Hz Main Motor Horsepower: 7.5 hp

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Indramat: CLM 01.3-X-0-2-B module -Item: 245551-07026 -Price: per piece -Number: 2 pieces -Dimensions: 390/105/H325 mm -Weight: 6.2 kg/piece

Available in stock 2 x Used Capstone User Connection Boards. Most commonly used for Microturbines C30. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Available in stock 1 x Used Capstone ECM Control Board (P/N 512300-030). Most commonly used for Microturbines C60. Please note that this is an used and damaged board, buy it only if you wish to use it for parts or to refurbish. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Available in stock 5 x Used Capstone Display Panels. Most commonly used for Microturbines C60 and C30. The units are used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Available in stock 1 x Used Capstone ECM Board. Most commonly used for Microturbines C60. The board is complete with all parts. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Available in stock 1 x Used Capstone IGBT LCM. Most commonly used for Microturbines C60. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Available in stock 1 x Used Capstone IGBT ECM. Most commonly used for Microturbines C60. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.